Honda rebel clutch replacement!

250 Honda rebel clutch change. Here we knock out a clutch replacement with some important recommendations!
If you like my content or If I helped you save some cash, cash app me, I accept tips, thank you!
cash.app/$Tepcocyclerepair
Thank you!
Amazon Affiliate links.
Honda rebel clutch pack:
amzn.to/3NQvhov
Honda clutch nut tool:
amzn.to/3pjrDcS
Milwaukee impact driver: amzn.to/3lIDxeR
Milwaukee M12 drill driver: amzn.to/3FX4Ed0
Stihl 4 mix Valve adjustment kit: amzn.to/3M037EM
RMStator Peak voltage adapter amzn.to/3pxsOSJ
2009 Chevy Colorado 3.7 thermostat: amzn.to/3ob2tsR
Mastercool high side socket: amzn.to/3Pg5yDI
Camshaft for this 725 Briggs amzn.to/3R6dkBD
Moog Promaster city front sway bar linkage, for 1 amzn.to/3OJJh0z
Oil filter: amzn.to/3abcuzi
Pneumatic bleeder: amzn.to/3mHjaN6
Oil extractor: amzn.to/3BkMWvc
Tire paste for easy tire install amzn.to/3jvKlZO
My favorite rear tire amzn.to/3AclT5w
My favorite front tire amzn.to/2UhcJUF
My tubliss set up amzn.to/3yaDb13
My favorite screwdriver (pick the longest) amzn.to/3yfP99T

[@paulsilva6543]

You sir have a gift for teaching. You are patient and explain things very well. Thank you.

[@TepcoCycleRepair]

Thanks for the kind words.

[@arcticgummibear4500]

Great Video. Learned something!!

[@pa4765]

Awsome. Thank you!

[@mariomonge340]

Thanks for the video, I didn't see if you replaced the seal as well.

[@blujernigan5170]

Thank you

[@brimbianco]

do you have any curved/bent steel plates? i found 2 in my clutch set and they look identically the same, i dont know if theyre supposed to look like that

[@jacobcorral1873]

Just switched my clutch out on my 2009 rebel…. After I did now my clutch gets stuck and I can’t pull it after riding for like 10 minutes and I have to rev match to downshift without the clutch to the point where I’ll stall out bcuz I can’t pull the clutch… any idea what it could be?

[@georgeshafferjr297]

Thanks

[@mutevibesgaming8616]

question: today I tried to do the clutch with a mate, on his 88 Rebel 450. I noticed I didn't have the right socket for the clutch nut, so we put it all back together. Now the bike won't neutral itself while in gear (with the handle pulled). What could've gone wrong. I used the same torque specs as on my Vulcan750 clutch basket. and it seemed to fit fine without any force

[@TepcoCycleRepair]

Sounds like It's your clutch actuator arm that the cable attached to, or the parts that attach to it, inside of the clutch cover.

[@babylone2693]

Good evening, I have the honda rebel ca125, I have to change the clutch, what diameter of the release nut is it? thanks

[@TepcoCycleRepair]

I put a link in the description, when you click on it be sure it's for your bike as well.

[@malikmoore5444]

Sadly I can’t find any help for the newer 500s it’s pretty much the same but I’m stuck after I put the new disks in there’s still play in the pack I’m at a lose

[@TepcoCycleRepair]

Did you measure the plates and fibers before and compare? I would try that, the new plates and fibers total thickness should be thicker. If it is and it still has play, something isn't sitting in there correctly. Just double check your work. Including the actuation bar.

[@maurarosamusic]

I need help :( I tried pressing down on the brake to wrench out the lock nut but it keeps turning :( Any tips? The bike is not on a stand, its on the ground. It’s also in 5th gear. What am I missing? :( Thank you in advance

[@TepcoCycleRepair]

You'll need an impact wrench for that if it's that tight.

[@audreyvo88]

did you replace the gasket seal?

[@TepcoCycleRepair]

No I didn't. I had one ordered but it didn't come in time. The original gasket stayed on the case in one piece and sealed back up fine.

[@babylone2693]

👍👍🙏