How To Polish a Motorcycle Engine FAST & EASY!

[@tomahawkprops4551]

Just got hold or an old harley that was in storage for 2-3 years. This will come in great help getting it looking good again

[@randypullman1155]

That a worthy looking steed indeed! Bravo!

[@justtrying2066]

I was here to leave the 900th like 👍 😊

[@elcidcampeador42]

Love that Honda bro! I have a Harley but my 1st & 2nd bike were Honda's and man they are great motorcycles! Good job 👍 BIG THNX!☑️

[@simplestuff3895]

Thanks for the superglue tip. Not only have I gone through many dremel brushes, but when they start shredding wires I’ve had a few stab and stick into my skin like little darts!

[@Bazzaland]

You can dip your aluminum foil in Coca-cola when cleaning up that chrome....works pretty good, I've found. Thanks for the video and tips! Great looking bike! Gotta ride on the back of one back in '72 when girl down the street got one. I was a senior in high school. She was cute and obviously had her act together.....

[@unionrdr]

When I bought my V Star 250 two years ago, I got this organic cleaner (Cycle Magic Clean & Shine) from amazon to clean every part of the bike first. Works pretty darn good! Then I used Mcguire's Last Touch Spray Detailer to polish everything. Also removed the light rust stains and pits from the front side of the front exhaust pipe! That bike looked brand new when I got it finished! Safe for painted surfaces too, unlike acid-based compounds.

[@cosmicbird1850]

Good info. I'll check these products out. I'm detailing a Rebel 250 as we speak.

[@erickriebel4366]

EXCELLENT JOB. GREAT INFO. SEMI CHROME. I ALWAYS USED THAT BACK IN THE 60S. BUT YOU ARE EXTREMELY EFFICIENT AND FASTER.

[@peterdocter4659]

Great tips man, the alu foil chrome and the dremelbits superglue, great ones!

[@TheContiGT]

Don't forget to run your engine once the ACF-50 has been applied to seal the job. It'll light smoke up a storm but it's unbelievable as far as corrosion protection goes. Best part about ACF-50 is that when youve done a full blown clean up job, it feels like the equivalent of that fresh smell you get in the interior of a car when you put a fragrance tree in after a deep clean 😍

[@GoldGuyRides]

I love acf50!

[@greatkingrat]

That gas tank looks so cool. Also thanks for posting this.

[@mackenziewarnick]

Great job, looks so much better 🎉

[@GoldGuyRides]

Thanks babe!

[@williamgorry694]

I'm an ACF50 fan. Thanks for the how to on cleaning.

[@k.i.i.3699]

Won't that stainless steel brush scratch the engine? Shouldn't you be using a brass brush to avoid scratching?

[@davestelling]

My thoughts, too (?)

[@untonyto]

GREAT VIDEO, AWESOME MUSIC TOO

[@GoldGuyRides]

Thank you! I only use music that I actually like!

[@Bri-tg6xr]

Wow what a diff, I may try this.

[@roderickmoyer9851]

Wow what a difference , the very first video I ever eat of yours is when you polished your Suzuki scrambler motorcycle engine I am curious how well that spray stuff will work as it is something I am wanting to try if it works for you, where did you buy it at thanks…

[@GoldGuyRides]

Thanks Rod! Yeah, that was a pretty popular video, hopefully this one is too! It seems like it is working really good, still no corrosion! I bought it on amazon, there is a link for it in the description of this video.

[@patmays7344]

Yes. The gas tanks on modern bikes, are a lot more difficult to remove. Just thought I'd mention that! Ha. Good video. But, this all takes a Lot of time, no matter how you do your cleaning?

[@lbdrummer3]

Nice job, thx for the tips and tricks.

[@dariusrodo]

Great work! I would like to give you one tip - for a better shine, spray the polished surface or polish pad with water before.

[@ghg8257]

Great video. Thanks. Do you know of an alternative to the Eagle 1 mag cleaner that works just as good? It seems like they may not make that anymore or if they do, it's difficult to find it. Thanks.

[@christophermcreynolds6001]

Great job, keep the good stuff going 👍👍👍👍👍👍

[@rayjay1901]

Great vid, and also great tips from everybody thanks!

[@tea4me324]

Update with the arsol acf50 stuff. Workin on a Magna, cheers from Vegas 🤘🔥

[@ThisGuy-c9m]

Take pride in.your good work. Thank you for sharing this technique! Awesome job. 🤠👍🏻✨️🇺🇲

[@arctic3032]

Before you Polish the engine, make sure to Czech it carefully, then you can Finnish.

[@GoldGuyRides]

And don't go russian around with this kind of job either

[@gosth81]

😂😂

[@tyslink]

I said to my friend (his name is Ian) "Doing a project like this would make me very Hungary, Ian "....sorry I'll show myself out

[@IEatCheerios]

When you go to the bathroom, European.

[@fredericbaue]

Dad, you don't have a motorcycle! Is no comment section safe?

[@oi32df]

And then did the ACF protect and prevent pitting from returning?

[@BalitangDaan]

have you ever try to remove air filter is there any different in power?

[@tyslink]

I just picked up a 73 CB750 that needs a LOT of TLC...I just don't know if I have the patience for this. First I need to see what it even looks like because it's currently covered in 50 years worth of grease and grime. It does make a big difference though so maybe I'll give it a go.

[@slj029]

They don’t sell eagle one mag cleaner anymore. Do you know of anything else that works just as good?

[@Speedslays]

great video im lookin forward to cleaning my engine soon!

[@bboy9955]

that reverb on your voice to funky break beat. sick vibe lol. ur cool.

[@Gearsandgrease]

Good video, you could have gotten it even more shiny if you sanded it down after the acid etch. It would be truly mirror shine!

[@kensantiago132]

Hard work. Nice. Thanks.

[@1StinkyFinger]

Nicely done, Sir!

[@bobcohoon9615]

Maybe an model type airbrush may be good to touch up painted engine surfaces. Polished areas can be masked off

[@UncleWally3]

Okay, but how do you get that beautiful patina that expresses an experienced aged look?

[@MechaNick03]

Do nothing

[@davidhester6648]

I would have thought a Brass brush on the Dremel? Too soft? Am about to attempt this on three Hondas

[@GoldGuyRides]

Brass brush isn't too soft for aluminum. If you're cleaning steel or cast iron, use a steel brush. Don't use a steel brush on an aluminum engine though because you will scratch it all up.

[@crowdycrowdys2514]

Nice job thanks for sharing 👍🏾

[@colmgillen2576]

Thanks for the tips.

[@chrishollis3795]

I wash with dawn dish soap and a fine 000 brillo pad and some rubbing compound followed by a wax and it looks like a mirrors when I'm done

[@stanweiler4344]

If you get it on paint, will it take the paint off?

[@thedrew2584]

Use carb cleaner to get rid of the metal polish residue for a faster clean up.

[@STho205]

Carb cleaner is great at stripping the old clear coat Honda sprays on their side covers....but it can also work its way into gaskets causing an oil leak if used on an assembled bike. Best if used on a rag in that case A wipe with ammonia or kerosene wet rag will do it too....then rebuff with a dry wheel.

[@lukelivesey801]

Was the acid based aluminum cleaner okay with the painted areas of the engine?

[@GoldGuyRides]

Yeah, it's very diluted acid and it doesn't affect the paint.

[@lukelivesey801]

@@GoldGuyRides great - thank you

[@yournemerald]

The link for the speedo tacho doesnt work anymore. Do you have a name of the product you can share?

[@GoldGuyRides]

Just search on eBay for an electric motorcycle speedometer tachometer unit.

[@garry9999]

Wots the word ? .......brilliant !

[@pede8889]

What a bike

[@Supersleuth0987]

Couldn’t you lacquer some of those parts to keep them looking shiny?

[@GoldGuyRides]

@@Supersleuth0987 you can try but clear coat doesn't stick well to polished parts.

[@Ladosligese]

remember acf50 is creeping :)

[@bentBuilder]

There's a MUCH quicker and cheaper method. Just use a polishing pad and cutting compound on an angle grinder. Side cover will take maybe 10min start to finish

[@BSA-D3-MDL-ii1ix]

"QUALITY" Vid, tips & result............💥

[@BenMalo]

Gunk original is the best way to remove grease and oil

[@tommy2910]

nice 😉

[@JamieMay-s8r]

You can tell that polish doesnt come in spray can with you. Lol. Good job

[@SeanSR]

This guy looks like shaggy. Cant unsee that..... Bahahahahaha.

[@Connor-j7l]

Thanks!..thats pretty swede advice..😁

[@Urs-c4m]

Love your method but takes me longer than a few hours. My 750 Four engine will come to bits and get vapour blast.

[@MNaveedshah-l9r]

Your bike model ans bike name??

[@dallas69]

No no no As an Aircraft Engineer and A&P Mechanic you never ever contact or clean any Alumina with anything with steel or iron. Steel or iron wire wheels and steel wool will corrode any and all Alumina metal. You may not see the Alumina part corrode right away but they will corrode very fast. Why? It is the microscopic particles of steel that touch the alumina that cause the alumina to corrode and once you do a wire wheel or steel wool rub there is nothing that will fix it.

[@dallas69]

DIY Al etching solution 12 parts Vinegar 8 parts Hydrogen Peroxide 1 part Salt Etch time 5-10 min.

[@KampaL-t8q]

I was going to say the same thing until I saw your comment. 30 years as an A & P I have never used steel on aluminum

[@axelsaul4207]

“Fast” 😂

[@larryfox4915]

She's looking sweet.

[@GoldGuyRides]

Thanks Larry!!!

[@talldrummer1]

Yeah, stainless on aluminum is a hard no, as stated by another.

[@dipling.pitzler7650]

A very bad idea using steel brushes or steel wool on aluminium engine parts! This destroys the original protective clear coat lacquer! Do this and you will at least have to repeat again and again! Use Dry ice blasting instead! PS: That round cover is polished aluminum not steel and now all "cleaned" parts are covered with fine scratches!

[@pkaramer]

NEVER use steel on aluminum.U develop surface pores,and in a few months pitting will develop within.Nothing except nylon brushes or polishing rouge.

[@qwiklok]

Cut the music. it's annoying, unnecessary. I passed because of it.

[@Tom-h3s4x]

Why not just polish it instead of making it Polish. You should think about it...

[@williamhiller3988]

Yikes! You are removing way too much material!

[@hilight1819]

Very​ bad​ job​ in​ my​ life​

[@mojesus680]

Waiting 4 that KickStarter 2b Used⛷️goodwork

[@2feetNDAheartbeat]

Nice. I recon it will run cooler now.