Honda S2000 Build Part 2 - How To Install Bonnet Pins (Hood Pins/Latches)

Building a track car? Got an after market hood? In this video we teach you how to install bonnet pins! / mightycarmods
MCM MAGAZINE ISSUE 8 OUT NOW www.mightycarmods.com/collecti...
Shop: www.mightycarmods.com/collecti...
Facebook: / mightycarmods
Forum: forums.mightycarmods.com
It's worth pointing out that the S2000 bonnet is aluminium so it doesn't rust. But if you are installing on a body part that can rust, make sure you punt up the exposed metal. There's also locking versions of these same catches for those that remove the factory system, or are using carbon fibre bonnets.
Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic if you are in any doubt.

[@mightycarmods]

Why did Moog install NOS? Why did he get a fibreglass bumper? Why hasn't Marty been helping? And why does Moog have a Honda at all when we all know he'd prefer to own a Nissan? All these questions answered and more... Please thumb it up www.mightycarmods.com/blogs/news/16607448-your-honda-questions-answered

[@SilverExGamers]

please reply hello

[@LelouchVelvet]

supercharge it

[@AchefsRideAdelaide]

I don't think they would fit my honda....

[@awsomemustang]

Cos it looks maaaaaad

[@DrathVader]

"I also haven’t spent much time behind the wheel of a V8 or a Rotary… " INB4 WANKEL POWERED MAZDAS (at least I hope so)

[@LowFlyinOK]

Hey guys, When drilling metal, you actually want the bit to spin much slower. You'll make better, cleaner cuts with a slower turning bit.

[@georgeisabeast111]

depends on the size of the bit, the bigger the bit, the slower.

[@MrDeaz]

Isn't the speed more about overheating than clean cuts? You would smooth edges anyway

[@Lobstersarefabulouz]

Krede nah.. it is about the clean cut..

[@woofer2121]

you are right especially with hard steel if you spin the bit too fast you will just dull the bit and heat treat what you are drilling.

[@mightycarmods]

Just in addition to this, because the whole section is being cut out, you don't need "clean" holes. It was simply used as a locator but yes slower is better - thats why we like Hondas - LOL

[@mobilePCreviews]

Things usually have to get worse before they get better if you're not doing it all at once. I'm sure once it all comes together it will look sick. I made a stupid post in the other video, giving him shit about the mods, but then I rewatched the japan drifting movie thing, and I forgot that modifying your car is about what you want to do to it. It's your money and your car, and TBH I'm thankful as hell that moog isn't stancing his s2000. I really look forward to the finished product, and I appreciate all the amazing free content these guys give us.

[@NathanSGuitar94]

Yeah stancing is the worst thing anyone can do to a car. I hate how some of the car community will hate on Moogs fully functional track-ready S2000 and then say how stanced/slammed Skylines and STIs are so awesome and great. It ruins the driveability of a great race car!

[@AR-rk9nn]

Free content? Are you fucking kidding me? They get paid per view you fucking joke of a human

[@NathanSGuitar94]

The content is absolutely free. Of course they get paid per view and from merch but it doesn't cost us, the viewers, anything.

[@SkrillMillMusic]

Im almost done with my education as a car mechanic but i still learn lots from every episode you guys make :) keep up the good work!

[@n8rad3]

Just finished this project on my car! This video was super helpful. I know their hood was aluminum but mine was steel and was harder to cut through so I think my experience was a little different. Some things I would add for anyone doing this on a steel hood/bonnet: 1. I was getting a lot of smoke, dust, and fumes (fumes from the self-etching primer that was under the hood) so invest in a good mask and have a fan running. 2. I went through a number of the metal cutting wheels so buy extras. Also, when the metal cutting wheels start to get small from being worn down, set them aside to use on the tight angles later. 3. Needle nose pliers were helpful. 4. I went through an entire grinding stone between both holes. 5. It was hard to keep the Dremel from skipping even though I was expecting it. I ended up with half a dozen nicks on my hood but I was repainting it anyway. 6. I found the plate that goes underneath to hold it together to be a pain in the ass (hard to explain) so I just used the nuts and washers that came with it. Cheers.

[@gnagarn87]

Every other comment is about the bonnet, rust, and corrosion. So to end that let's explain it plain and simple so that everyone understands. *The bonnet is made out of aluminium so it won't rust.* Any metal that got iron in it will rust if left exposed. Aluminium doesn't have any iron in it so it won't rust. Untreated aluminium has good corrosion resistance in most environments because it forms a thin oxide layer that prevents further oxidation. So there's no panic or real reason to paint the exposed aluminium.

[@sonikbizoom]

Always glad to see y'all back in the driveway! The Honda is coming along quite nicely.

[@TriniRogue]

I always like MCM videos before watching em, never have i regretted that decision

[@boujeePerformance]

Am I the only one that likes the bumper and hood pins?

[@DDesignsProductions]

I like them too! Bumper will look way better once it's painted!

[@navelaviator]

Tbh if he doesn't put in a turbo and Intercooler its ricey, like 100% ricey, full respect to mcm but I see no point of putting on the bumper apart from making it look "cool" (but actually it's gonna be rice)

[@MrJockeyHD]

+xQzVortex he doesn't mean hood scoop he means the pins they've just installed

[@joaquinfranco9012]

No like them

[@tsukiJP]

Jayden Isemonger I'm with u

[@DanDuffy071]

Clicked to see the Random Facts about the first MCM ep and this was just posted. MAAAAAAD!

[@nicksan11987z]

Awesome thanks guys this video really helped out this weekend with my install !!! The carbon fiber hood costs just over $3000 USD so it was like cutting a whole MK4 gti apart value wise. Love your videos been a fan for years. I did have a few things I learned along the way took me about 7 hours. I had to remove the headlights and chop the pins down a bit to make everything work right but everything worked out in the end just took some extra time. I thank you and my BMW now looks a heck of a lot better with a hood back on it. cant wait to see what you guys have planned next.

[@shoeonhead]

Best episode in a long time! Really felt like you went back to your roots and I LOVE IT.

[@3DMachines]

Thanks you guys! The video was very well explained. I'll probably use something like this on my drift car project.

[@jean9910]

I like how they just addressed the but will this fit on my honda meme.

[@redzz02]

I love that front bumper, and the latches look really good!

[@jdog3690]

Thank you so much! I have been back and fourth on these exact same Hood pins. I typically despise Hood pins but like this but didn't know how hard they were to install. You guys rock keep on keeping on

[@Sulestiall]

By the looks of that new front bumber some choo chooo is on the way

[@Sulestiall]

By that i mean turbo

[@dsofe4879]

no. you mean choo choo.

[@ieuanedwards3485]

oCre8ve turbo+vtech+nos=mx5 destroyer

[@woofer2121]

can you do that with the s2000's stock engine? I thought the compression was too high.

[@sabotshell]

Unfortunately, from reading their blog post it sounds like that is not a near or long term plan. "Why don’t you turbo charge it? Marty and I don’t want to make the same videos over and over again. So when people say “turbo charge it”, while this may be a fun car to drive in the real world, we’ve just done a complete turbo conversion on the MX5. It was expensive and took a lot of time and neither of us feels excited about doing it again right away. If we wanted to get some internet cred, we’d throw on some expensive kit, expensive wheels, an expensive engine conversion, expensive interior then do an expensive turbo conversion. $25,000 later we’d probably get a few favourable comments, and then more comments from people saying we should have left it stock."

[@mitchellcook9830]

You should have coated the exposed metal in epoxy or plastidip or something to prevent rust, the first time it rains the rust will start...

[@mightycarmods]

It won't rust. We stripped all the paint off the bonnet of our MK3 Golf then covered it in sea salt and water and left it outside and even then we couldn't get it to rust. But if you're cutting something thats not aluminium then yes, always paint the exposed metal (like when cutting parts in the engine bay etc) kzbin.info/www/bejne/qWisp2dodrSNf80

[@mitchellcook9830]

I stand corrected, the s2k is all steel except the hood, interesting... (See Category "Body") www.honda.com/newsandviews/article.aspx?id=4099-en

[@mightycarmods]

Mitchell Cook ^^ Take note everyone - this is how you 'KZbin Comment' - a meaningful conversation where we can all learn something. 10/10. And mitchells point is 100% valid - paint any exposed metal if you've cut something!

[@Obsidian762]

Mitchell Cook I stand corrected as well. I didn't even notice there were no sparks from the cutting. Of course it's aluminum lol

[@mitchellcook9830]

Obsidian762 Yea, I thought of that too after the second time I watched the video, when he was using the abrasive wheel to get it down to finished size.

[@yogisnorlax]

So far im loving the s2k build. Cant wait to see the finished product.

[@nath_tayl0rr]

I'm glad this vid came out because I've been looking for a quality instructional video for these latches.

[@MONSTERRALLY100]

Happy 7th Birthday MCM !!

[@902isfake]

when drilling through paint make sure to put a piece of masking tape over it. it will make it so when you drill the hole the paint wont chip

[@liljendal20]

I was actually watching some old MCM videos because I wanted a new one and had nothing to do!, one refresh later Yess! :D Awesome episode as always, keep them rolling!

[@npsdptk0084]

GUYS!!!! takes so long for you to upload a new episode!!!!! CANT WAIT FOR THE NEXT ONE!!!!!

[@jhalvorsen93]

I'm not one to comment on videos much but with all this hate, something has to be said. To some people, yes the front bar looks ricer and the bonnet pins might look a little plastic, but honestly these guys dont just do these mods to please the crowds. I have a sneaking suspicion that they also do these mods because it's what they want to do to their cars. They have their own personal preferences you know. I honestly just like the fact that I can watch these two mod their cars because it gives me ideas on what I can to do to my own car.

[@smnfldstrte27]

Does it add as much horsepower as putting racing stripes on it?

[@DevilNeverCry2550]

yes

[@mactwentytwentyfour]

maybe 5 kW

[@JOHNJ0HN9111]

100 more horses

[@MechRider89]

ok now get serious guys! its gotta be close ish to around 200ish more possible HP

[@sealgraffit]

It adds 36 unicorns.

[@guillaumefracchia803]

WENT PERFECT! JUST DID HOOD LATCHES WITH INSTRUCTIONS FROM THE VIDEO!!! Huge thanks, took 6 hours but looks awesome

[@jamestickner6460]

Personally I love what you so to your car's there yours at the end of the day and every mod u do makes them your own love the show keep up the great work

[@lextube]

The front bumper is growing on me. I reckon it will look mad once it's painted.

[@TheSleepyMechanic0524]

Wow, you both are left handed. That's pretty neat!

[@d1viking]

No the camera is using mirror view

[@Tombrosapien]

Lefties r da best

[@TheSleepyMechanic0524]

@@d1viking no, they're both lefties.

[@bryanmayo7317]

I love u guys channel just seems like u don't upload that often but still keep up the good work can't wait to hear that s2000 with exhaust!

[@Dimorac]

That looks BEAUTIFUL slick as hell, keep it up guys !

[@20ERIC1992]

Hey guys! I've just rewatched Kei to the City and the behind the scenes and I'd like to know if you really took that mad Mira from Japan to Australia and if you have any plans to make it run again. I know you are busy with your project cars but it would be nice to see that car running again!

[@callesundberg]

Eric Santos ain't you happy about now

[@johnnyk617]

A small bit of touchup paint goes a long way

[@Dale_Groves]

Been watching you guys for what feels like forever. Awesome work and evolution of the show! Please do a "budget" supercharger build on the Honda, similar to the Miata build. It would be interesting to see if there are any OE chargers that can be adapted to fit.... Failing that it would just be awesome to hear that VTEC/charger whine 👍

[@declanjones8015]

Amazing video, you guys never fail to inspire me!

[@roberij05]

The car was ruined when you put on that disasterous front bumper. I'm on team Marty now.

[@_Professor_Oak]

How? It's not even painted yet of course it looks weird. Are you some kind of purist who likes to keep their cars looking 100% stock?

[@sabu1297]

no one cares about your opinion

[@roberij05]

TelevisedChaos No. I think the one he purchased just happens to be farely homely.

[@FrenchValleyAirport]

i wish this was old mcm, when none of these fuckin ricers existed^^^

[@briskxd1093]

Its sopposed to look like the type s bumper from Japan the only thing different really is the little hole on the top wait till finished product before you talk shit. Also you probably don't even have a car and if you do its probably your moms mini van.

[@enrosamygga]

How many kilowatts does these do? Greetings from Sweden!

[@Lambo6fo]

I love these guys! Been watching them for years. Keep up the great work :)

[@shadowrundas]

this is awsome just ordered a fiberglass/carbon fiber hood and wanted to do this to prevent flying hoods on the freeway!

[@RadostinVelchev]

Remove the factory lock and catch, put a set of those and if you leave in my country you will have something missing from the engine bay the next morning :D

[@LilmixPixelmaid]

Reasonable point but... The car's a convertible anyway. It'd be gone with the factory set up anyway if the roof was ever left open ;-)

[@Reploidx9]

@@LilmixPixelmaid That's not true. I've left my MX5 with the top down before and nobody touched it. Hell I don't even lock it lol. I'd honestly they open the doors rather than destroy the roof.

[@WT0708]

Can you please do hydrolic handbrake

[@JParkes43]

this guy knows it

[@trillrifaxegrindor4411]

special rear calipers,lines and special hydraulic valve and large handle in car

[@jadenwatt]

Whoever made that mod is a genius!

[@king.dannyman]

Mighty Car Mods Moog is really loving the S2K

[@36thgallardo]

The car community is literally one of the most hateful groups I've ever seen, and this is coming from a guy who regularly plays LoL.

[@officialsked]

The true, genuine side to the car community is great and they are mostly respectful and happy to talk to people unfortunately the more "hipster mainstream" people think its great to invade that community with overly used jokes and completely misused names where apparently moogs track car is "riced"(and just because its a honda).

[@Joseph-C]

To be fair, the updated youtube comments were designed to promote flamewars and trolling (No downvoting, but more comments = higher up) So this comment section is a just a hot pile of shit... It's really easy to insult peoples cars, so of course trolls on youtube do it, but on legit car forums and stuff like that, petty insults tend to be few and far between.

[@mightycarmods]

I wish this wasn't true but sadly in the comments section it is. What I can say, is that after travelling to places all over the world and meeting tens of thousands of car enthusiasts in real life who actually own, drive and modify their cars, it's quite the opposite. People who actually work on cars and know what goes into it are always overwhelmingly supportive. Often those without cars or have never held a spanner are the ones that leave the most critical feedback because they have made better looking and faster cars in Forza. One day when they are old enough hopefully they'll experience the joy and excitement of working on something, no matter what it is or what the internet thinks about it. Anyone who hasn't worked it out yet that cars are a personal journey probably needs to go buy one then turn a spanner on it.

[@lachlanjdm2768]

Mighty Car Mods don't ever feel the need to change something on your car just because of a youtube comment guys. the internet seems to bring out the worst in people when it comes to cars, and its good to see that you are still sticking to what you think looks good on your s2k even though so many people here seem to want to change it. its not about what other people think, its about what makes you happy!

[@drgnzadiel101]

honestly, im not sure what is worse..the car community, the japanese fashion (or fashion in general) community, or the comic book community

[@FreddyGaertner94]

Won't the bonnet rost if you don't cover the cuts with some paint or other stuff ?

[@tasty2choc]

yes it will.

[@georgeisabeast111]

it's probably aluminium.

[@WeRunRunescape]

George Sharp For the american viewers 'aluminium' is 'aloooominum'. Thought I'd clear up any confusion

[@thehandlesticks66]

J Robson go fuck yourself

[@EinmaligBefasst]

George Sharp Even then it can oxidize, which can spread under the paint and look very ugly. Aluminium is a base metal.

[@brokenhearted1231]

Awesome video guys I can't wait to see this car finished....

[@JayTekPerth]

You guys stuffed up my order but I will never stop loving you

[@jayshields1234]

Screw what everyone else says this s2k is dope and i love the bumper, just because a honda has a bodykit dosen't make it rice

[@WhyAreYouUpset]

yea, any car with a bodykit is rice

[@xboy4331]

A body kit is only ricey if its not functional

[@floofymcnuggets_2373]

Phil better tell all the supra's and skyline's they are rice because the have body kits.

[@brettfarmer6848]

dude that s2k is so dope and that bumper is cool to

[@flameboy13]

The one on the left side of the car looks lower than the other one. Uh-oh

[@gigglesgaming6362]

Been watching yall for years!! Keep up the work :). If only I didn't have to sell my car to help pay for college

[@sirbazzamous2386]

That bumper looks amazing!!

[@Sudz3]

No Painting the unpainted /Cut Metal? won't it rust?!

[@jakobsime4190]

Sudz no it's aluminum

[@trillrifaxegrindor4411]

alum

[@BornToDrive1500E]

Ok, but now, on the places where you have drilled the bonnet, there is some exposed metal and since some water can get there it may start to rust. I don't know but if that bonnet is made out of alloy then I guess its fine. You should have said it the video for all the people who have normal steel bonnets that they should put some kind of primer (is it called that way in english? the first coat you spray for protection from rust).

[@TheTubaMan2]

I literally typed up something saying exactly the same thing, refreshed the page, and then saw your comment. My apologies, I didn't read this before I typed mine. Great minds think alike, I guess.

[@BornToDrive1500E]

Turner Pendergrass Hahaha, I agree.

[@cartouchator]

alluminum doesn't rust

[@BornToDrive1500E]

cartouchator Thats what I said:>> "I don't know but if that bonnet is made out of alloy then I guess its fine."

[@gnagarn87]

cartouchator Aluminium won't rust but it will start to corrode

[@081588101]

seriously, i love these guys!

[@CreArtStuff]

to soon to judge, but pretty sure this project is gonna be mad! awesome video guys

[@user-dj1hy6zc6q]

No primer over the exposed bare metal? A little rubber strip around it won't protect it from rusting.

[@ramhoves]

That's what I was thinking too. At least put a little primer on with some q-tips

[@DeathMetalFunZone]

ty_ger it's actually an aluminum hood, so it doesn't need primer/paint. typically yes, you are 100% correct when working with a corrosive metal

[@user-dj1hy6zc6q]

DeathMetalFunZone So, aluminum doesn't corrode? Are you serious?

[@RhodokTribesman]

+ty_ger aluminum makes a layer of oxidation called aluminum oxide that prevents it from rust

[@ramhoves]

aluminum does not rust you are correct. rust is a term used for corrosion on steel. Aluminum does corrode just like every other metal. Metal corrosion class 101 is complete.

[@wipi-dn2jf]

i swear to god they are not properly aligned

[@christianaugustin7047]

No they re not.

[@FrenchValleyAirport]

camera angles?

[@michaelsgoproadventures9185]

What a sad day. I am up to date on all your videos now. Keep the camaras rolling. Looking forward to more stuff from you guys.

[@fabianhernandez9338]

I love watching these guys more vids!

[@TadeusIngame]

better to put masking tape arround the whole to put some paint on blank grinded metal . otherwise it will start to corrode after some bad weather turns ;) just an idea. or you trade the honda for a real car like a subaru or toyota

[@PedroFTeixeira]

Yep... I thought no one else had seen that now it's just a matter of time till the bonnet rusts, if they don't paint where it was cut.

[@martinh.2171]

It's aluminium...

[@mitchellcook9830]

martin h. no it's not..

[@rambow70]

martin h. It is probably some type of alloy with iron in it, I bet it will rust.

[@fishtankarmy1394]

It might be an indication that the car could possibly be getting resprayed in the near future, just throwing the idea out there...

[@danmark312]

i think that Moog don't like his Honda, with all the shit he's putting on it

[@nightshadow2478]

If he didn't like it he wouldn't put it on there or he would take it off

[@oneox958]

Great old school diy. Well done boys

[@benmoore4391]

Looks tidy guys well done, can't wait too see it finished ay

[@offtrackpl]

I always like what you guys are doing but if I have to be honest, This looks bad and cheap, The car looked clean before, now it looks plastic

[@dsofe4879]

I'm sure they'll clean it up, were only at part one of the build so far..

[@offtrackpl]

By clean I meant that there was nothing on the bonnet and the car looked better for me

[@mightycarmods]

Not many people I know complain about the look of a piece of bread before it's even turned into a sandwich... Or complain to their hairdresser when only half their hair has been cut. We're midway through a build... come back when it's finished (and it's all the same colour!) and then see what you think? You may like it or you may not but at least you'll be judging a finished car...

[@dsofe4879]

Mighty Car Mods amen to that. can't wait to see the rest.

[@offtrackpl]

Yeah, at the end it may look maaad and I'm sure it will, I just like the car to be as "clean" as possible

[@gaivoron]

Moog that bumper is little too much rice not enough class.

[@FrenchValleyAirport]

***** because you're a ricer. lmfao.

[@FrenchValleyAirport]

***** Nobody said it's because it's unpainted, lmfao.

[@FrenchValleyAirport]

***** Hmm lets see here, it's big, it's bulky, probably heavier, eBay style mesh grills, it looks nasty, and he's not even going to turbo it so I don't understand the need of having a bumper with a front mount for an intercooler cut out for. It's rice all around. You're an idiot.

[@BUSGNAPPO]

David G​ Please, shut the fuck up and let Moog modify his car in the way he wants. You're not the one who owns it. Oh, and stop saying "lmfao", please.

[@FrenchValleyAirport]

BUSGNAPPO Tells me I don't own moogs car, then proceeds to tell me what not to say in my comments. Fuck having logic.

[@mrsideperson8405]

Clean work as always, good job guys.

[@lachlanjdm2768]

good on em i haven't seen so much hate and so much love for a car on this show or anywhere for that matter, but i love how moog doesn't conform to what people believe to be acceptable on a car. yeah, i'd build an s2k a little differently, but it's his car and he can do what he wants with it. that's what modding is about, expressing yourself even if not everyone likes what you do to your car. keep it up guys, it's good to see the show getting back to it's roots! :)

[@robgreenwood6939]

And now a car thief has easy access to your engine bay to jump your car! get lockable pins!!

[@trustn01rs]

They didnt remove the factory latch so you still have to unlock it

[@matk22]

Now thiefs can get in your engine bay, congrats

[@nightshadow2478]

No they can't, he didn't remove the factory latch system.

[@mightycarmods]

1) They can't get into your engine bay because the factory system is still there 2) If you have a hard core track only car with carbon fibre bonnet it wouldn't be parked on the street anyway 3) If you remove factory system you'd buy the locking version of these catches (as explained in the description)

[@joeman543]

well good thing it's in a garage.

[@SIRICKO]

Mighty Car Mods Moog can you please go on facebook and join my group called HONDA BAYS It's over 60k members.

[@ieuanedwards3485]

nightshadow2478 its better to have both latches,I had a austin mini for my first car and I had my grampa put a rover metro sport engine in it, the bonet blew up as i was doing 130 mph down the motorway, nearly killed me

[@Avcchand]

Thank God.... Another episode came,i died waiting...Thanks Mcm we love your videos

[@ieuanedwards3485]

guys you should have put some sealer underneath the catch or some anit rust treatment, and by the way, loving the honda build guys, cant wait to see the finished project, thanks for entertaining us!

[@shaunrwil]

Rice. Rice everywhere. Big nos sticker on the dash. This car makes me sick

[@christianaugustin7047]

Honestly I think all that car needed was rims, a supercharger kit, some decent brakes and suspension setup.

[@GTAgamesfans]

You most probably have never seen the episode when this S2k is genuinely equip with NOS.

[@CSpartan6]

then fuck off. dont watch and dont comment.

[@nickgrech9634]

Lucky it's not your car! Shut up idiot

[@ODPTV1]

The NOS sticker is required so people know it has NOS installed incase of a fire or crash so they know to make extra precautions

[@toomanyminges]

Loving the show.

[@meritonberisha3871]

i like it when they work together.

[@megameccaful]

Liked and put on favorites for future reference.. love ur videos guys!!

[@TheWorstmexican]

I like the hose guard on the inside nice touch

[@ProjectBimmers]

thanks.. exactly what I needed to see. Now I'm all for it Looks great

[@Flanker84]

Actually instead of a race track mod, this can be used as a good theft deterrent if you install hood latches with locks. I find this useful in zones where the thefts use to steal stuff under your hood, like the batteries. Great DIY video, keep up the good work MCM!

[@TheSfifteen]

Cheers for this guys!!!! Going to try this on my Swift sport

[@PHUSII]

Nice tutorial. Keep them coming!

[@ethanmacheras5967]

Looks like not too bad of a job and it looks really good!

[@ganz210]

I own a Ford Escort much similar to the trd lzr. I will definitely be installing these next!

[@psementalist]

Those hood pins look super sick mad Moog

[@teksaucee]

happy new year MCM :D

[@lamella64]

Moog, your car looks awesome!

[@07DYNASTY]

Those are sick so cool releasing them

[@natedoggg0]

looking good cant wait till its all finished going to look maaad

[@USBSTREAM]

Another great job from you guys :)

[@Balomis]

I don't understand all the hate for MCM's S2000. I think Marty and Moog are putting together a sweet car, one that they want. The bumper and hood latches look mad! All these people screaming "rice" for everything they do. Its a Honda guys, every mod for it is gonna be rice. So calm down. As a VW fan myself, I love the look of that Honda! Great vid guys, and keep up the solid work

[@TheSVERguy]

I love this build. I feel Moog is doing this stuff because it's what he wants. It'll look good when done. They know how to get street cred. Does anyone remember the video about the VW?

[@themotofixery]

I like that cardboard trick! great video thanks gentleman!

[@cameronstain4793]

they look a little like they're uneven. they look good other than that. LOVE YOUR WORK GUYS!

[@Beakz_]

Little bit of a tip for cutting odd round-ish shapes. For the rounded off areas, find a drill bit that matches the radius of the edge of the shape as close as you can, if not smaller. Find the center and drill a pilot hole, then your "edge hole" and repeat for the your other round corners/edges. Finish off by cutting out the area between your holes and file to perfection! I did this for a custom PC window and it worked out fine. Just be careful and measure your drills and cuts as best you can. Love the show guys, hope your come back to Los Angeles when I get my first car! '06 WRX wagon hopefully ;)

[@aaronpeople101]

Love the episode, had an older episode vibe

[@afterbangerz]

well done boys, looks 10x better than mine.

[@waty0usay1]

can't wait for the sideskirts and a new rearbumper + a cool looking rearwing, starts looking like a real car now.

[@CSpartan6]

***** if you don't like it stop watching..

[@7eduardoep]

Awesome it looks like a lot of work bit it's so clean at the end

[@IBtehOmar]

cant wait for more honda build updates

[@Crustyto3z]

So glad you guys use the s2000 as the project car, In stead of the miata