AP1 CLUSTER SWAP! IN EG CIVIC HSG EP. 6-18

[@stephansd7]

Lets give this man mega props for doing alot of this one handed while holding a camera

[@frias2287]

Nice one👍💯

[@IntegraDIY]

This has to be the sickest cluster swap 👍

[@Hohmies86]

Man this is so awesome you did this step by step Outstanding at being a human sir

[@pumpingironmke]

I did the cluster swap for my 6th gen coupe...goodtimes...changed the leads around different colors, FUCKING sweet thanks guys...

[@iSamuritwns]

Yo where’d you get the the Pin-out Diagram?

[@olderrol1968]

These are the channels I love. The ones that educate you

[@srarcade]

Roll back capability is always a +1 in my book. Yeah, the splice is ugly but not much you can do less than finding a totally spare set of connectors to make a conversion harness which is serious work.

[@Lastsight100]

Where was this when I did it over a decade ago! lol, props for making a great vid for people to follow.

[@slammed95ej1]

you must of done a few pulls cause you lost 2 bars of gas from first installation to after testing haha 😂 😂

[@HondaVlogs]

He's alive!! and Showing us some dope shiiietttt.. Shout out to Chris for the hookup!

[@akandok]

I don’t remember how, but if you google it you can switch the s2000 cluster to show mph. It as simple as clicking 2 buttons I believe

[@HondaStreetGarage]

JDM clusters are different

[@dgarnerdavid]

Just watched David's video @thatdudeinblue of this EG coupe and fell in love with everything you've done! I have an EJ2 with a jdm GSR swap, and have always wanted to do this cluster swap! Thank you for the tutorial on how to do this! Much love and many smiles with school girl giggles!!!

[@tendosesame]

I need to have this in a 6th gen accord with VTEC and eBay turbo kit with Nos, 2 step and flat foot, all 3 connected to buttons

[@achikennugget38]

I like cutting the wire a bit father back on the harness and crimping on blade connectors whenever I want to be able to go back to what it originally was. They can get pricey and bulky though.

[@Solefresh10]

achikennugget38 that’s pretty smart

[@Danielsanchez6137]

Awesome video! So easily explained, been wanting to do this for some time but was scared away by wiring

[@jpiks6855]

Man all that work you should connect them to a harness for plug and play and sell that 👍🏻

[@PhokingPerez]

Thank you bro, this helped with wiring mine in 🙏🏽🙏🏽 no need for the expensive k tuned kit

[@michaelperrenoud894]

Noooooo you wrapped the wires? Cool, all mods get returned to stock. The s2k cluster is a cool mod.

[@1994jony1]

Can you just unpin the wire from the car harness and pin in into the s2k connected instead of doing the wrapping? Just curios if it's an option or not?

[@shotbyhoodie4683]

Jonathan Mendez You could but some wires need power and grounds so you will have to combine some wires anyways.

[@BBoyDrkNova]

Awesome, thanks Mark for doing a full/thorough install video, made my wish come true from my last comment on your video with Charlie's install.

[@joserotary9636]

I'm the same in that way, the way you did it is good, that way you can put the original one back in, NICE 😁😁😁💯💪

[@efsforlife7578]

I love the way you talk to the camera just be you brother lol

[@elibahena698]

Which speeohealer do I get and which modifry do I use. Thanks

[@aaronjerome1200]

I’m going to attempt this! Nice job bro

[@JimJones-999]

Damnit boy! About time you got some good ideas from the comment section.

[@neloner623]

Firstsstttt and Mark you can’t leave us out here this long we need your videos lol....

[@SavageD1984]

Gosh i love the s2000 cluster its probably my favorite and it looks so good in the eg well done bro and thanks for the info

[@youngfeezy7969]

Wow dude, a video like this is pretty valuable

[@k1ortia]

Really good, iv been wanting to do this to my ek, ej ...always loved the digi dash from back in the mk2 astra gte 16v days.

[@ALW96]

Wireworx plug and play. Can pull harness and easily change back to stock later down the road. They will built the harness you need based on your selections at checkout

[@LSRxJ]

How did you wire up the modifry? I’m about to do a S2k cluster into my EG with K swap and you didn’t show that part.

[@MiguelGomez-sy1kf]

Did you ever figure it out ?

[@gus562metal]

I really wanna do this to my EK. Can I just use a harness conversion instead of splicing everything? with the speedo healer and modifry thing instead? Thanks.

[@Joefrmjersey]

Will this work for my 93 delsol

[@lemueltorrescrispin8095]

Noticed the itr recaro.did you have to modify anything???

[@25skater4life]

the parking brake wire (green/red) should be D10 (brake indicator) because D9 is parking brake, right?

[@RadiOG58]

Everything anybody needs to know in one place. Great job!

[@ChIsTfLoW]

I need help calibrating k tuned converter box is a pain to get the temp and fuel to work

[@cmsperformance0124]

Love your videos. Always a inspiration for keeping me going.

[@bryanlee3353]

old video but how did you get the fuel gauge to work? did you not need some kind of module?

[@cartmandu03]

found you?

[@neglectantithesis446]

I like the way you think.

[@quinton7854]

Mark tested the light socket with his finger, as you can tell by his hair lol

[@natsusenpai3930]

Del Sol I have ktuned is it plug and play now? I haven't had a chance to do it I recently got it

[@ericg1149]

Bringing this back from the dead because i want to do this to my newly acquired crx! Just wondering if anyone knows if DA teg seats fit in 91 crx???

[@walt3r88]

Probably covered this but I'll ask anyway. Are the pins different from the eeg to s2k plug? Could you not just slide the pin into the plug itself?

[@snatchric4595]

Can you show us how you ended up mounting the bezel? I have this same setup but the cluster falls back it to the side

[@ethanryan3860]

Very detailed video and a cool swap, gonna try to convince my brother to do this on his eg 👍

[@TheDailyEG]

Awesome video! I just received my AP1 cluster today. What i did is get a secondary EG dash harness (you can get it out a EG in less then 10 min) and solder the AP1 cluster to that. If i ever wanna go back to stock, i just reinstall the original harness. BTW can you explain to me how i have to hookup the Modifry on a D15B2 OBD-0 EG4? Some says i can use the wires at the gauge, some say i have to tap into the ECU wires. Thanks!

[@IcemanJD08]

Is it not possible to take the pin out of the original connector and put it into the new one? If you do that then you have a temporary solution that is also a better connection

[@niemo435]

Sick! Awesome line by line. Hopefully they make this compatible with a CB7!

[@carloszapien9296]

its very doable. ive made adapters for it

[@Stevelangdon93]

Gotta keep those stock clocks to keep mileage in check ;)

[@LSRxJ]

Hello which model of the speedohealer did you buy? Or are they all the same

[@ronychamale5191]

Did you figure out how to turn off the abs light ?

[@djUpRoar]

Love the swap, where did you end up grounding to for the temperature gauge?

[@2Drezik]

did you find the answer ?

[@djUpRoar]

Unfortunately no

[@2Drezik]

@@djUpRoar do you have a module or direct wiring ?

[@sonvu5374]

I finally did this to my 96 ek with the wireworx, plugged in all the harness and tapped the 5 plugs for the back light,signals, and highbeam indicators, its lights up perfectly and works as it should, rpm works as well but the speedometer,fuel, and temp gauge is not reading, ktuner converter is not installed yet because its on back order, is that the reason why?

[@anziomoses3251]

How much does cluster cost and are you able to send to South Africa

[@boosted__demon6852]

Is this only on k swap cars or can it work on Bseries cars?

[@yeezy7905]

Boosted_ _Demon I’ve seen it on D-series so guessing it does on B too

[@bjboyy3401]

can this be done in a 87 in crx first gen

[@youngt2827]

Bjboyy an 87 CRX is a second gen. And yes you can install this into any CRX. Have you installed it already by any chance?

[@jojilaurenciano9786]

The illumination socket is wrong?

[@thisjustin6426]

Noticed your battery light never came on and didn't see the high beam working either, mine isn't working either, do you know how to fix them?

[@onyxscarface]

You could of add the S2000 cluster plugs to the civic plugs and have both

[@noegonzalez3427]

Brother, I have a question: where did you buy the S2000 cluster?

[@Michaelscott62518]

Hey man how did you get the black interior, did you just get it from another eg or does the interior from another model like an Integra fit?

[@claytonhaske]

How do you get the shift light to work? And, for a manual vehicle, does it show what gear your in?

[@jonathanroman6532]

Awesome write up mark!!

[@christopherpaez4948]

Could this be done on an em2 civic ? I have an 05 value package and it doesn’t have a tach :/ which sucks cus I’m just starting to learn stick shift

[@Cloneufc]

I like my Type S cluster over the ap1 cluster. To each their own.

[@สากลเสรี]

howmuch set wiring for eg

[@SamSpeedTuned]

Was there any modification done to fuel gauge for it to read accurately? I did this cluster swap on Honda EK and found the fuel gauge wan't reading accurately. In-fact it shows full and once the tank is at 25% then the gauge starts to move.

[@derrickmccrady4958]

Im a little late, but if you wanted to be able to go back to the stock cluster, why not just get the male pins, throw them in the plug, and tape it up that way? Then you wouldnt have had to worry about re pinning the stock plug when you switch back

[@joshgarcia3660]

Mark (2016): Today on HSG we go be replacing this Ej1 ughhhhh Eg6 gauge cluster with a ughhh ughhhh S2000 gauge cluster. I mean look at this thing. Man, that’s baller right there. Check that thing out man Charlie (2016): *holding AP1 s2000 cluster* Hello!!!!!, Is it me you looking for????

[@cantokk]

How do I get a digital cluster for my 2001 Honda Civic ?

[@sergiovicente7014]

My battery light doesn't light up just like yours. Did you manage to light up? I try d11 and d12 (S2000 cluster) and the two at the same time and with no success :(

[@keifferotti598]

May i know what type of speedohealer ? Because theres a lot of speedohealer for different bikes. May i know which one to pick

[@franciscojavierrodriguezna8180]

Hola. Se le puede montar al honda civic em2. Espero tu respuesta

[@gerardogoveche8064]

Wow this cluster looks pretty nice men great info too men👌👍

[@nimcastillo-07]

Great video man helped me alot 👍

[@anthonynieves6614]

Just stay with the stock one everybody goes always to the stock one

[@keifferotti598]

Hello hope you reply. May i know what kind of speedohealer i will buy?there are a lot of speedohealer for specific big bikes. May i know what to buy

[@mart182003]

Why would you ever want to back from the s2000 cluster?

[@dummyjum]

Mike Gose Just incase lol. People get tired of the same old shit all the time so yeah just incase lol

[@Burnt_clutch89]

To sell the car

[@dracoali6130]

Pierre Espinel I don’t know if you have a S2K cluster but it’s far better than any stock EG, EK or EF cluster. Yeah I’m sure he did it so he can go back to sell the car or to even swap it with another car. But no. You won’t get bored of this cluster. I have it in my EK and I would never go back to stock.

[@painlessf0x102]

Can you swap an ap 1 on a 95 Integra ls model

[@armandocortez5622]

Keep Up the clean work Mark!!🤟🏼🔥

[@nowaydudehuh8145]

Great upload! Kicking knowledge BIG HOMIE! loving this mod!😎👍✌👊

[@juanpaolobalagtas7553]

Hi! Good day! I am also experiencing the same issue regarding the temp. So i just want to ask for help regarding it. Where did you run the ground from? From the cluster ground wire going to where? Hope you can help me. Thanks.

[@2Drezik]

did you find the answer ?

[@keifferotti598]

Can some help me. Why i cant dim my gauge. When i turn the car on the gauge is already on bright mode

[@bryceh5115]

Next time take a lighter to the tape like shrinkwrap. Cleans it up a lil bit and helps the tape adhere to itself

[@NoKzMoto]

I was promised Monday night, but I'll accept it.

[@wilbertoserranoroman1002]

De que es es conta milla que le montan a los honda civic 94

[@vincyking3]

Are the pin sizes different? If not why don’t you just the ap1 cluster connectors?

[@carloszapien9296]

yes s2k cluster plugs/pins are different from ap1 & ap2

[@corybennett817]

Any reason to think this wouldn't work with an automatic EG?

[@danielrochaguzman4042]

Is it the same process for an eg hatch?

[@charleshiadobson1993]

Can you do a ap1 or ap2 on a d series in an eg hatch

[@Kdrobuilt]

Can anybody help me? Mark says the dimmer goes to D6 on the s2k pig tail, but on the pinout for the s2k cluster there’s nothing there?

[@Kdrobuilt]

I have an Ek.. if that helps

[@land0_built]

Can you do a write up for a gsr cluster

[@reneandrade11]

That's really insane! Awesome!

[@austinparker9907]

The modifry website you linked only gives the option for a ap2 cluster I'm gonna do a ap1 does this matter or did u use the ap2 modifry for the ap1 cluster ?

[@pnw_element9822]

Can u please make me a plug and play harness and how much ship to 97223

[@drew0348]

Mark I I have two questions. I would like to do this to my Honda. In what part of South Carolina do you reside, and how much would you charge to do this to my car?

[@Kingbuzz92]

My man got that. Goku haircutlol

[@josepina3154]

Did you ever converted back to mph

[@dustinmitchell4628]

why not depen the harness clip on the s2k cluster and just pin it into the s2k clip

[@MiguelGomez-sy1kf]

So a USDM s2000 cluster no need for speedo healer ?

[@BombedRoC]

speedo healer is for the convertion to mph if im not mistaken, i didnt need it since im on kmh