Fishing life hack idea that few people know about

[@donb3557]

Love watching your videos. I can never understand why people take the time to watch merely to be negative about what you create.

[@rustyshackleford9557]

How 'bout this: 1)Keep your line in a cardboard box. 2)poke a pencil or dowel thru the sides of the box close to the top so a spool can be placed on the dowel as an axle. 3) that's it ! But remember kids. NEVER do this when installing line on a spin or spincast reel!!! It will cause line twist. On those type reels the spool must be stationary laying label side up with line coming off in the same direction as it goes on the reel. Note: some small pony spools require label side down.

[@morkotik3316]

Красавчик!!! Нет слов. СПАСИБО.

[@BangJalok]

Nice!, Thaks for your sharing

[@jessarmendariz8752]

I made one with Paint roller 10 years ago and for my tension on the spool I used springs from my car brakes. I locked them down with bolt that set screws.

[@jdbeernfishing2916]

? What is the white stuff you glued in? Thanks

[@josehenriqueandradearagao4316]

Parabéns, obrigado pelas dicas 👏🏽👏🏽👏🏽🙏🏽🙏🏽🙏🏽

[@robertlosasso4222]

Strike Kings Contra comes with a setup for putting line on your reels . One end has suction soft plastic , the other end is white plastic housing that has screw out top, slide your spool over the housing than screw cap back on . Then attach suction end to glass or clear plexiglass and your ready to go .

[@kenmiles4145]

Why didn't I think of that, what a great idea.

[@toaluasaleupolu7060]

Awesome better than many 👍👍👍

[@CALICOAST805fishermanlopez76]

Nice video's perfect I appreciate it. Thank you 😊

[@benskai2475akurfishing]

Greetings coming from the Aru Islands, Maluku, Indonesia, creative greetings

[@KHALISVLOGGINGSS]

What a great tutorial bro... great, this tool is very helpful 👍👍👍 22:25

[@charliec2560]

It was a great video. Very helpful. 3:47

[@davidenriquez2668]

HOW COOL, best tip ever

[@r.j.macready5620]

Hopefully, you are an engineer by trade. Very well thought out designs and very impressive use of materials.

[@grahamvoght9294]

Weather it’s not news or not, it’s good to see innovation especially when it involves my favourite subject. Keep up the good work.

[@rodrigograjales5038]

Eso estuvo genial..!?👍😊

[@Ifishazores]

Awesome I am on it! Thank You!

[@salmanfishing-jm9ex]

Good luck for you my friend🤝

[@Kafishing-xv7zi]

May natutonan ako master salamat at may ibigay ako sayo pang dagdag,kaw na bahala MAGSUKLI❤❤Ingat

[@mnchannel]

Sangat menginspirasi teman,

[@stevenlengyel9701]

Ok good one, I was getting impatient 👍

[@philippecharteronzaoui1103]

L'idée est tout bonnement géniale

[@StephenMedhurst-tz2cw]

What a kerfuffle just spool up.

[@charliebecker2216]

Brilliant

[@pegknife]

Why not put a thread on the paint roller and use a Butterfly/wing nut to suit ?? be a whole lot quicker and neater .

[@АлександрСеврюков-п9у]

Отлично

[@webteufelbrb]

👍🏻🎣🐟Petri Heil Playlist Angeln/Aquarium 🐟🐠 4:40

[@wardati_8429]

Super clever

[@ИванРыбников-ь9х]

You have skillful hands and a golden head (У тебя умелые руки и золотая голова(...

[@gianluigigiaconi7468]

In lingua italiana mai è?

[@kicoisanoasfalto907]

Olá seu kicoisa manda um salve aí vai e dá um like fortalecer o canal inscrever no canal compartilhe com seus amigos obrigado ❤

[@allaboutfishingVP]

❤❤❤❤❤❤❤❤❤

[@nikolaipetrovic7253]

натяжку кто сделает!?

[@ryanjones550]

I'd have 4 rods spooled and 6 fish in the boat in the time it took to make this.

[@kevine9986]

Much easier way

[@stephanburno8691]

All that work and you can buy a better one for 5 dollars what a waste of time to load line and that is the wrong way to load a spinning reel will twist the line leading to tangles casting

[@jimcross1840]

Its just the fun of repurposing stuff i have laying around the garage for me

[@rustyshackleford9557]

Yes! That would be a disaster for any reel except a baitcaster. Folks would be well advised to watch a vid done by a tournament pro fisher for the proper way to put line on a spin or spincast reels.

[@moonpiespotlight4759]

@@rustyshackleford9557 By the way he tied that knot on that spinning reel, I'm sure he know which way it goes.

[@rustyshackleford9557]

@@moonpiespotlight4759 let's hope. I see folks who dont realize that the spool lays stationery, face up ( except pony spools) for spiñning reels. Those spools on an axle are only for baitcasters.

[@Andrei-o3b]

Барашки были бы лучше.

[@PITBULLsurfcasting]

aliexpres 4 euros

[@boclark2987]

Entertaining but you have taught nothing. Use words and explain what tools to use, i.e. drill sizes, tap size and thread pitch for threaded holes... etc.

[@jobinusshanpru6785]

Kids please don't watch

[@leethornley2480]

You should use your imagination, you cant have your hand held all your life

[@Westozmagic]

Bloody hell mate are you mentally 2 or what next vid will be on wiping your bum in it will be ply sizes for toilet paper and direction of wiping 😅

[@Saidsaid-xi8sk]

C du perte de temps.😡😡

[@atlantic_love]

Useless.

[@Мишаня-ь6у]

Не проще катушку в воду бросать и на сырую наматывать? И натяжка есть и ровно. И такую порнографию городить не нужно😂

[@romansoltys2843]

Долбойоб бля, краще свою тупу голову у воду засунь!

[@samuelgarrod8327]

Nothing new to see here, move along...