The Rotary is IN! Engineering Adjustable Mounts for our RX-7 Powered Pit Truck

[@HooniganProjectGarage]

Thanks to you guys we decided on Brap Pit, but just for the hell of it let’s do a second round of names below.

[@1970HondaCL100]

Jump in Brap Pitt and Angle-ina Slowly.

[@aserta]

Can you guys do a day in the shop at some point detailing the whole shop program? I'm sure others are curious as to the frequency of cars leaving and entering as well. Anyways, awesome episode, this minitruck is gonna rock.

[@RustyBoi-ni1mj]

Brappy McBrapface

[@NeverLetOff]

Special Kei or Smaller Baller Hauler

[@NeverLetOff]

@@aserta You should watch Hoonigan on Twitch. There is a lot of behind the scenes and content that never makes it to the KZbin channels. Twitch.tv/hoonigan

[@chair362]

i really enjoy how dan is actually including kyle, the man who started as a camera guy, but will end up a fabricator because of dan.

[@waking00one]

Also shows you just how much of a great wholesome dude Dan is on top of a garage god. Love it all around.

[@Andy.Marshmellow]

Yea Dan would be cool to work with, seems like he can hold his patience, is a talented fabricator, and doesn't give up.

[@danielsegreti4475]

Coolest classroom I’ve ever seen.

[@m.Xander_562]

Dude Dan is awesome I met him at the hoonigan toy drive and I told him about my IS300 and how it is my first project car. We we talked for a little about my goals for the car. He's a down to earth guy always willing to help someone out

[@bassmafiavlogs7430]

Also good to see someone wanting to teach someone instead of being selfish with their skills. Happens all to much.

[@cadincaldwell2637]

Danger Dan he's our man! If he can't fab it, no one can!

[@illagevidiot8254]

Thats some mad chairslayer shade youre slingin

[@cadincaldwell2637]

@@illagevidiot8254 If Rob comes down from Canada then he probably can!

[@pikachu.922]

por que no los dos?

[@renealcantara7816]

@@pikachu.922 Ifwu

[@Mrimnotfluffy]

Project binky *drops mic*

[@1970HondaCL100]

Danger Dan is low-key my hero. Now my neighbors think I'm weird yelling out "Garage Garaaaaage!"

[@HooniganProjectGarage]

Your neighbors are the weird ones, probably.

[@1970HondaCL100]

Hoonigan Project Cars I sang the auto-tune version.

[@ae29productions]

Same here

[@julesf6307]

Brap Pit is just a perfect name

[@MrZachster9]

Can’t wait for the body kit

[@HooniganProjectGarage]

Same!

[@HumbleDaves]

@@HooniganProjectGarage So does Miura-san still have that Hello Special line hanging in the rafters for you!

[@gabrielmuthler2101]

No Dan singing garage garage, I feel robbed

[@HooniganProjectGarage]

Today was a DIY Garage Garage!

[@moretrash4you]

I feel rob RAoooooobbed!! 🎶

[@enriquepastor3626]

I miss BA HA UPDATE

[@jonathanlund2456]

I still heard it even though he didn’t sing it

[@michaelcianci7944]

@@HooniganProjectGarage but i enjoy harmonizing with Dan

[@ajgmz3]

He said clean it up make it look good. Like if those welds weren’t beautiful as they were

[@HooniganProjectGarage]

Dan is a perfectionist.

[@ronjlwhite8058]

Dan can weld and fab @ level awesome.

[@LoneRevD]

Right? I think most of us would love to tig weld as good as his worst bead....

[@tommihommi1]

going to a welding trade school sure helps with that

[@bruta1f3ar]

Them some purtty welds there Dan. I like how Dan explained why he put those tacks where he did. Very important tip for any beginning fabricator! I like to use aluminum blocks and pieces of flat bar to clamp my pieces against as I Tig it out. Keep the temps down and the distortion will follow.

[@MrXeleris1]

Is it just me or do other people miss the daily transmissions? It was so simple and relaxed compared to these structured shows, and I miss that aspect of Hoonigan. The second channel harks back to those simpler times, but it just doesn't feel the same. These shows are pretty awesome, and I'm not complaining about them, but I just wish that we could get some more daily transmissions. I want to see that raw, natural side of Hoonigan that I subscribed for all those years ago...

[@nicolatesla768]

Daily Transmission has its own Hoonigan channel now. Subscribe so you don't miss the new content.

[@GGoodroad]

Dan makes this channel great.

[@nickrogers8606]

I love being caught off guard with that 8am upload

[@HooniganProjectGarage]

Gotta keep you on your Internet toes!

[@brendanreynolds8122]

It's like 6:00 now in Ireland

[@bigh8367]

Its 4 in aussie

[@alexdodge2515]

Lol yesterday I was caught way off guard with a 9 pm Cleetus upload

[@danielpereira9463]

Dan is a bad ass fabricator! He can see 3 steps ahead. Hope he's making the big bucks he deserves

[@ryanp9084]

Wondering if the horizontal engine mount might possibly rotate under high (ish) torque loads due to the adjustment slots that mount it to the cross-member? Great team work with the CNC Plasma.

[@r.aiyappa.k]

What I love about this show is Dan's constant tips for all the work! Thank you Danger Dan!!!

[@joealex65]

#DangerDan is just a master mind! And the best thing is to watch it LIVE on Twitch! Also, HI DREW

[@HooniganProjectGarage]

👋👋👋

[@dumdumdumbest834]

ALSO HI ALEX JOE

[@drewp25831]

HI!!

[@anthonyreddy2834]

Great job Dan fabbing and explaining "how too" fabbing, welding and making your drill bits last!

[@TimsAFK]

Who else sang Garage Garage solo.......

[@fardinm8196]

TimsAFK I sang it loud and proud

[@nicu-gs3qs]

Sang it in my quiet study hall at school... Whops

[@brianraymond9857]

Every damn time!!! since baddaddybrad sang it the first time.

[@enriquepastor3626]

I heard him saying it in my mind lol

[@Matty.Hill_87]

Danger Dan let us all down 🤣

[@cineskies114]

So glad that Dan joined the Hoonigan garage, I remember when you first started & replaced the last guy. I was like dam he seems shy and I didn’t know anything about Dan’s background, but now I’m 1000% glad Dan was hired to replace the last guy! Your a beast dude! 💯✌️

[@leveluplife8585]

is that the heated seat option?

[@taylorbynam1929]

Never can go wrong with a 13b build! This is gonna be the best pit truck on tour!

[@philliphoward4065]

Needs to be called bad daddy brappy

[@8089kyle]

Once he described perfect drill speed by metal shaving length... he earned my respect. Too many burnt drill bits went into making great cars lol. Thanks Dan. Your a gentleman sir.

[@joshyyy23]

Lol I was on the driveway working on my car and filmed my own little garage-gaarraagge and my neighbors think I’m on something😅

[@jayr_5104]

Fuck what da neighboors think but shit u never kno they on some shit lol

[@applecart44]

I really admire your creativity and troubleshooting! It's crazy how you can just make all this custom stuff work, stuff that's never been done before the way you're doing it. Hoonigans for the win!

[@joshyyy23]

I was really expecting a full send garage-garage at the end

[@wonkybomb1865]

I appreciate it when Dan teaches us what he is doing and how to as well as how not to do something. I always learn something I never knew before when watching Dan weld and fab he's awesome!

[@giovannibazzini1403]

I wonder what Darnell is up to these days

[@joshuanichol-edwards8218]

His @ is @sunsetsnbooze I think!

[@Oktain]

I love the fabrication aspect of this series. It’s so neat to see all this custom made stuff and how it’s done, you guys sure make it fun to learn how!

[@andryxa1p845]

Can we set up some kind of petition to gather signatures or get a bunch of people to tweet Brad Pitt to stop by the Donut Garage and do donuts in the Brap Pit?

[@upurkilt7246]

Think if we just bombarded him with tweets and fb comments he would do it l9l

[@Greg-TC]

They can’t do donuts there anymore :(

[@andryxa1p845]

He did jackass before so maybe he might do it. Yeah it sucks they can't tear up the lot anymore but I'm sure they'd make an exception for Brad Pitt lol

[@jollyrodger5319]

City of Long Beach shut that s*** down they do anything they're in trouble

[@espany02]

Man you a genius!!! That subframe work!!!!! I love custom/scratch builds!!!! That plasma cutter must be a heaven sent. Free handing is hard lol

[@coloradocobbbler]

Plexiglass engine cover? Lol maybe just a little window.

[@slythemongoose9138]

"Wankel Wagon" will forever be in my heart. Got lots of love in the comments last time too. I love watching you guys fab, Danger Dan - you're a beautiful man-wizard.

[@CharlieBennici]

When did Dan start welding?

[@HooniganProjectGarage]

Some say he welded his own crib as a baby. (We’ll get you a real answer)

[@YeetxBoi]

@@HooniganProjectGarage that sounds close enough to the real answer tho..

[@Husnain237]

there's a vid on the bonus channel from when Dan was in st Louis for FD, basically a vlog of him going back to when he started working on cars. not sure if it'll have the answer to your question though 🤷‍♂️

[@jollyrodger5319]

@@Husnain237 I remember that, lol.

[@jordangiles697]

just wish the videos was longer love to watch this beautiful machines come alive

[@backtoobasics]

never mind the heat sheild, need a game of hotseat. havnt seen a candidate like that since the mitsubichi roasted under my arse adn caught a blaze, nothgin beats a 750 000 kms engine for reliablity

[@tonycolvin8670]

Dan, you are the man! Living the dream!

[@charlesfullmer4662]

I feel weird not hearing dan say "garage garage"

[@dennisfreebairn8754]

Awesome work with the brackets and the mounts for the 13B, great job guys

[@mauricejones5683]

plexi glass to see the engine????

[@slythemongoose9138]

I've heard people talk about Lexan... it can be clear like plexiglas, and withstand pretty high heat, but idk if it can shield heat from transferring through... cool idea!

[@colesteeby6024]

i dont really think that would work, because of the 13b`s intake manifold how it folds back up and over

[@artemis4674]

@@colesteeby6024 I think they said they will run ITBs because the intake wouldn't fit

[@drewp25831]

It would melt down on the engine in no time!

[@BifsieOfficial]

Yea, if you enjoy the smell of melting plastic.

[@paulchapman3948]

The mad brapper. Kyle and Dan are a great team-the green team... you guys rock!

[@just-in4043]

Is the rotory going to be "Bridge Ported?"

[@plav032]

It's going to be a Peripheral Port, it's the largest and most efficient, but you get like 2 MPG's with it.

[@just-in4043]

@@plav032 thanks it's going to a monster in that little truck.

[@Tunerguy21]

@@plav032 Semi-P port is what I remember Vargas saying in previous vids.

[@joegoveia6499]

Props to Dan for some awesome work. You're actually a damn decent fabricator. Props

[@henesseyhd4183]

Hi Dan! How's it goin ya legend?!

[@jrichardson-m9m]

Really cool that these guys are getting this rad pit truck. I remember when they came to St. Louis for formula D and during the autograph session I was running late and they called for the driver's meeting and while everybody else was getting up to go James and Piotr stayed to sign for another 5 minutes so that the rest of the line could see them. Really cool guys and super friendly.

[@luisr407]

LMFAO I actually said Garage! Garage!

[@BigMike91]

heck yeah DANGER DAN is were its at give him his own channel haha !! he knows all the good tricks of the trade for running a good shop and keep your tools working properly as well as how to use them properly!!

[@tinystar3010]

name: Drew Carrymore

[@chieftron]

These episodes keep getting better and better. Love the informational tidbits too, definitely helpful to know.

[@Leofred2000]

Hoonigan got some balls swapping one of the least reliable engines in to a support vehicle for the most prestigeful team in FormulaDrift 😂😂

[@teofrontado]

Leofred fr

[@Greg-TC]

“prestigeful” nice bradology

[@Leofred2000]

@@Greg-TC Thx learned from the best

[@maddbeef1019]

Seeing that Vargas is building the engine, it probably won't be that bad.

[@harryballzack]

I blew one up in a girlfriends car. She was pissed.

[@friojas210]

Really digging this build and truly do love the fact your taking time to explain the processes into fab work. Keep up the good work!

[@kymjames8457]

Finally I get in the first hundred comments it's 2:30 in the morning here yewl brap pit k truck

[@pckldplmfshcm]

Newfoundland or India?

[@kymjames8457]

Strala mate south Aussie

[@pckldplmfshcm]

Dope. I didn't know there was a :30 minute time zone there!

[@mrchrisk36]

Danger Dan the Fab man!! I'm always ready for an episode of Garage Garage if it's Dan building and welding its like watching Picasso

[@fabertastic6259]

I still like "Brapzuki" better!

[@d100dodgepw]

This is the best Hoonigan series you guys have done! Keep up the awesome work, and keep showing us the in depth fab stuff, that's the best part. I haven't really touched my project in a few months (new house, baby, etc) but these last 2 episodes are really lighting a fire under me to get back in the shop asap and start cutting my silly LS-egacy up more than I already have!

[@thebigSimon]

Stopped watching the kids for this!

[@HooniganProjectGarage]

Hopefully they’ll be fine for 10 minutes.

[@thebigSimon]

Hoonigan Project Cars best ten minutes you can have. More videos please.

[@jordyaguilar8776]

Priorities come first my guy

[@thebigSimon]

I’m glad people get it.

[@enriquepastor3626]

Simon Cecere teach them to sing garage garage and watch the show with them

[@karoltercjak2661]

BraapPit is the best name for this truck, DangerDan You're the Man high5 for that ! keep goin' on!

[@connoisseuroftigolbitts]

I’m still calling this the Wankmobile 😂😂😂

[@trippydrifter4674]

I think this is the coolest build you have done so far

[@R00fk0r34n]

totally just broke out into song singing "GARAGE GARAGE!!!!" In the middle of school X'D it's okay, my instructors are cool with me watching car stuff #VocationalSchool

[@a456987]

Dan looking all professional with his mechanics jumpsuit

[@lyon666]

Love this channel but you guys got so much stuff going on, its getting frustrating. Too much sideways action not enough forward action. Again, my favorite channel.

[@slythemongoose9138]

It'll come... I feel like they're still finding their stride in how to grow the channels and have the right flow through projects. A lot of irons in the fire, probably hard to balance snd keep them all hot, but I think they'll find a groove.

[@lyon666]

@@slythemongoose9138 My hopes aswell

[@joegaskill8742]

Yeah to much bullshit now,it was better when it was just cars at the shop doing doughnuts.

[@slythemongoose9138]

They still haven't moved to the new shop either, I'm thinking there will be many more tires to be slain once they unveil the new digs... they had to stop doing donuts bc they weren't getting permits anymore. It'll come boys and girls, it's still Hoonigan, they're prolly anxious too.

[@amnerisandino1375]

Dude!!!!! I can't stop watching your videos fresh ideas super clean work awesome commentary big ups from the far lands of Rhode island....

[@alextubolino9680]

I miss when you guys used to just have cars come and rip up the yard now you guys just rip off other KZbin channels

[@joegaskill8742]

Yeah they ruined it now!

[@taylorosteen1398]

Agreed, I still enjoy their content, but the new formatted shows don't make you feel as "whole"...I guess you could say. It seems they are searching for their identity.

[@joegaskill8742]

@@taylorosteen1398 there "searching" for more add revenue!! I LOVED daily transmissions!! And I get it that they got shut down but all these crap channels they have now are just for them, for money.

[@lilbrrrd]

Simplisity is key! Love the set up

[@jameskauffman8405]

Cardboard Aided Design (CAD) the only way to go. Thanks for the drill tips. I Like when someone shares their knowledge. Good name Rad Pit.

[@kevinschultz7040]

Loved the details about drill press travel speeds etc!

[@sneakytaniwha1941]

Brap pit, is one of my favorite builds on youtube.

[@ElkinsEric]

Dan IS the man. I really like the engine mounts

[@mcyooper820]

Dan is the Boss, Great welding man.

[@jaredmassic]

Some solid drilling and welding advice given. Good job.

[@jstewart1417]

Dan thanks for all the fabrication tips

[@jonathanthiel8690]

Loving the fab work you guys are doing, great to see custom plasma cut parts too. A word of advice for slotted brackets: Rather radius the slot ends, that reduces stress points that you will have if you make use of a square slot......and it makes it look pretty too :) Shout out from South Africa

[@g0ldensample21]

I enjoy the knowledge you throw at us. Thanks

[@MrAudioDub]

This is BY FAR the best project so far on GARAGE GARAAAAAAAGGGEEEEEE!!!

[@JonaTronLegacy]

always super bomb to watch dan do garage magic!

[@zacharylewis3528]

Those brackets are killer!

[@DevBizkit]

excellent work Dan. Great tips on machining too. would've been cool to put a thick piece of plexiglass over the engine but the 13b would melt that like butter. hope the drive direction of the engine and box matches the diff.

[@damonfletcher3824]

Danger Dan is such a classy man!!

[@thepaintslayer4821]

This is my favorite build so far... Customizing something from nothing is pure class

[@nathanpace7371]

Dan makes this stuff look so easy. Jealous of your Tig skills man!

[@kongartsvg]

LOV THE ATENTION TO DETAIL THAT U ALWAYS PUT INTO THE JOB

[@davidwindsor2866]

A couple of small triangle gussets on the bottom of the main engine mount brace. For strength would be good. 😉👍👍

[@WSjumping]

Dan, what a legend nice hair cut too 👍🏻

[@TheSVERguy]

That plasma table is putting in work

[@sihatch670]

Love the sound upgrade!

[@ifinney7]

Great fab advice from Dan! His work is really really good 🤙

[@450tallis]

Good work Dan, keep it up.

[@jordantolcher]

I'm doing a fabrication apprenticeship and watching Dan, kyle abs the rest of gang is awesome ✌️great content and I learn more about a trade I love cheers bois

[@laurenbina4188]

Love the fabrication guys!!

[@zeromasters2286]

I frikkin love watching you work man! Great job!

[@MRTYREMULISHA]

nice job Dan your a good fabricator ................BRRAAAAAAAAAAAAAAAAAAAP

[@brettpowers9892]

love the rotary noises!!!!

[@andreadebona3859]

Amazing amazing amazing just amazing

[@ohhsootrappy797]

you guys are so creative & it’s amazing how you all come together to let that baby rip

[@5t6blue]

Definitely will need a reinforced firewall under your seat and legs. That sub frame is simple but amazing at the same time definitely gave me a some ideas for a project I'm working on.

[@jesusvarela8626]

nice project of the car Rx-7 power

[@kirkpatrickconstruction897]

2 years ago....but this has got to be my fav build....got me looking on local sites for one

[@jaytee6329]

Brap pit is gonna be a lil beast when its done hell yeah!!!!

[@JelmervanderMeer07]

Danger Dan making it look easy!

[@Johnnwho]

This video is making Dan look too professional! Great work!