Hoover vacuum making loud noise

Trouble shoot a Hoover Wind tunnel vacuum that's making a rattling noise from roller, replaced roller, problem solved. ( I did find other hoover vids that were good but nothing for my specific issue )
Don't forget to SUBSCRIBE thnx
new hoover roller bearing kit amzn.to/3o112Lj
*Support this Channel @*buy me a beer*-www.buymeacoffee.com/danshaffneX
*GTTP merch- www.teepublic.com/t-shirt/213...

[@_Dr.Pepper]

A few days ago the only knowledge I had of this vacuum was how to vacuum. KZbin vids helped take it apart but I was not aware it had bearings. Thanks for the informative vid. This has got ti the problem.

[@LaurenCarroll-zv7pj]

Thank you so much--same vacuum, same sound! I appreciate that you've saved me the time and effort of figuring this problem out.

[@jrey6186]

Ran over a pair of earbuds in the home office and this started - now have it torn apart, pulled roller and sound ceased - found your vid problem bearings in roller huh makes sense - issue resolved without tearing further into product, thank you - roller purchase it is then, much appreciated

[@phyllisbroome299]

Thanks alot, I thought rhe engine was about to burnout on mine until I watched the video.

[@GetToThePointplz123]

Nice

[@janicecooper192]

Yes. That's the noise. Got a new brush roller, problem solved. Thank you very much!

[@dreamer323sg]

Brotha you just saved me from putting mines on fire lol

[@GetToThePointplz123]

I get it man, vacuums suck ( literally)

[@ericpeterson5935]

That sounds like the exact problem I have with my Bissell. Thanks!

[@nunoandrade9333]

I just bought a hoover H-free100 just 1h ago. I assume it is a recent model, but since i live on an Island in the middle of the Atlantic... It might be an old model LOL as soon as o tried it it started rattling.... Just like yours! Thanks for the help

[@somewhereintx828]

I have a bissell but yes this helped!! Thank you!

[@garywunsch7229]

Thanks for posting pretty sure mine has the same problem. This pretty much convinced me to order a new roller.

[@santosivillalobos3675]

I had this when I was 10 years old

[@thatvacuumgeek]

its the brushroll. Check the bearing and for play in the brush

[@rileyglover4914]

I used to have that vacuum I am try to find another one.

[@JamesHagin-wg2qd]

Take the plastic covers off the bearings and clean put them back on and reinstall it will run like new.

[@sophiaprate5866]

I feel like there are lots of loud vacuums. I wish there were more quiet vacuums

[@GetToThePointplz123]

Fer-sure

[@brettarogers144]

Anyone have trouble with the replacement roller not lasting? I imagine they fixed the problem by now (?)

[@michaelversant8401]

having same issue.

[@angelwitchywildingrocco]

I have a different hoover 🙄 i will look underneath it....but the pipe is vibrating so i guess new filters they are a year old now😂🙈 and i have birds, rats and a dog 😂

[@GetToThePointplz123]

Sounds like your vacuum gets a workout

[@livelife6214]

I use mind 5 times and now it doing that

[@gwenirish9689]

Do you have the link where you purchased roller ? Thanks

[@GetToThePointplz123]

Sorry, I don't...

[@Nick-mg5xk]

www.ezvacuum.com/hoover-uh70120-windtunnel-t-series-with-onoff-brushroll-303202001-genuine-p-3755.html Or this one. Happy to help! :)

[@waltersobchak7275]

Still shouldn’t be running that high and loud.

[@Ca31_Buff]

Brush roller bearings.

[@brettarogers144]

Can the roller be rebuilt? Here in Canada, shipping is 20 and roller 25 USD. 45 USD hard to justify for resale at 100. Surely it can be rebuilt!

[@brettarogers144]

Took the roller apart and feels like the bearings were not made right - wiggle a bit.

[@GetToThePointplz123]

I'm not sure about the rebuild, I think when I was looking into it (as far as parts) just bearings wasn't an option...I understand, cost of everything these days is crazy...good luck

[@brettarogers144]

@@GetToThePointplz123 Aliepxress tends to have little things like bearings. There are also industrial shops that supply many types of bearings (ex. Aklands Gainer) . Just need to measure out the bearings

[@HR-uf9sj]

@@brettarogers144 same. Cannot find replacement roller. Is there a video of disassembly?

[@brettarogers144]

@@HR-uf9sj I bought replacement bearings. Becareful removing the bearing covers as they are weak. I broke both, but was able to put it back together. Use 2 flat screw drivers and try to get them close to the cetner so there is less twisting when you prie them off.

[@karimoon5323]

Hoovers the only vacuum my parents would buy..NOT THE PLASTIC ONES...if you take really good care of the classic models they can really last..I'd rather buy a second hand Hover than plastic .I call Vacuums of the Millennium " Dusposable".