thanks just done mine to perfection!great job great video!
@josemariamartinez63677 жыл бұрын
Good tutorial. I recommend wearing gloves, the brake fluid is corrosive
@JordiFloresSoy3 жыл бұрын
awesome thanks, it made my m4 feels like new
@jake30966 Жыл бұрын
Can you help me with replacing 1 piston on my Tech 3 V4 brake ?
@yusufunlu35305 жыл бұрын
DOT fluids are dissolving with just water. If you do an power wash, you don't have to use brake cleaner. Good tutorial.
@smiley49302 жыл бұрын
can anyone help my piston in the lever keeps getting stuck even after i replaced the rubber seals
@elempayer9 жыл бұрын
Its there any bike build comming soon? Your LV and Nicola where awesome
@upup-yc7if8 жыл бұрын
excelente tutorial
@heliotmaster71628 жыл бұрын
Thanks for showing me. Yeah I will pass on HOPE brakes, the bleeding looks like a PIArse. The DOT brake fluid looks like it will get all over stuff EVENTUALLY. I suggest Shimano for best brake bleed system, I can do each brake in under 5 minutes with zero mess and mineral oil.
@Tunnelrat66668 жыл бұрын
+Heliot Master I have a set of Hope DH4's which are 14 years old and have now been installed on 4 different bikes let see your shimano do that. Hope pure quality.
@Krikstar1237 жыл бұрын
I have both they are the same to bleed. Open lid, pour in fluid, pump through (open/close a couple of times while doing so), tap on the sides to get eventual bubbles up n out, done. DOT issues are WAAYYYYY overrated. Cars, Trucks, Motorcycles, Pit bikes, Dirt bikes, Mopeds, etc. uses DOT for a reason and without any problems. Same goes for bikes. It's not a problem. Disadvantages with Shimano are leaking pistons, harder to find mineral brake fluid (the don't have at any gas station just like DOT), no spare parts available to fix them and because of mineral oil lower boiling point, they need cooling fins, vented discs, sandwich material for more cooling etc. Not that they are bad brakes at all. They are cheap and work well, but Hope is most definitely better quality and longer lasting.
@Krikstar1237 жыл бұрын
+Sidowse: You can bleed Hope without syringes - how is that a problem? They are the easiest brakes i've had to work on ever.
@Krikstar1237 жыл бұрын
You can use a syringe from the bottom if you please, but I never had to. Yep, bubbles goes out at the caliber with the old fluid. No problem. Works everytime for me. 5 minute job and no fiddling with syringes and shit. On vacations a small piece of hose is all i need to bring to make a bleed. DOT fluid is available everywhere anyway.
@pkundrat7 жыл бұрын
Nothing prevents you use syringe. It is just Hope How-To video uses other method. I had my E4's bled twice and mechanic did a syringe method in less than 5min without issue.
@cfd0045 жыл бұрын
tks
@jlouter8 жыл бұрын
When done, simply spray brake cleaner at caliper forcing all oil and contaminates into your brake pads and rotor.
@moonte79338 жыл бұрын
yeah,but it will be clean oil and contaminants☺
@isuckcsgo70258 жыл бұрын
dude he didn't even get any oil on the calliper
@user-sl6jc3fn6g7 жыл бұрын
Cluj Biking 3
@user-sl6jc3fn6g7 жыл бұрын
Cluj Biking 3
@cases54792 жыл бұрын
Remember to wear gloves y'all ! 🧤
@user-ue7jb7yp5e3 жыл бұрын
Если это хоуп это не значит что их не нужно перебирать. Чувак! Да у тебя мазута вместо дота вылилась!
@surabhikm34706 жыл бұрын
supper. no
@maplic7 жыл бұрын
Why do you guys use this horrible music, and not just a voice tutorial