is it the same on a rc2x? i wanna buy a old scott gambler and it got that on it

Thank you. Very informative

my bike is a 2013 model and it's just stock at home because my rear suspension is no longer loaded with air. what is the possible reason and what needs to be done to fix my rear suspension. Thank you, I hope you can help me with my problem. my suspension is fox rp23 boost valve. 160

I had this problem it was simply the 203mm adapter wasn't aligned properly when I bolted it.

So wasted 5mins out of my life to tell me to replace the rotor and pads 😂

Very timing video as I got my 1Pint Stan No Tube Sealant.🎉 Thanks

The part number is TRK-JB07 - Topeak Joe Blow Max Check Valve Housing

WD40 works really well, my dad taught me this when I was a kid. You'd think it would lubricate it but it does when wet which gives you time to set them where you want, then when it dries it gives it nice grip almost like this here vid or glue.

Learn to speak proper english everything you said were bunched up together in words

Why are you no longer creating videos

Perfect

Hello, what is the length of the springs with marzocchi 888? I want to wear one soft rock shox boxxer?

Очень интересно.)

الله يبارك على محرز 🇩🇿🇩🇿🔥😍

And magically the snowflake ❄️ inside the forks appeared 😅😎

It went together easily in less than an hour. kzbin.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.

Recommend this video! Excellent description👍👏

Washougal mx 2023

Çok temiz anlatım

Can you tell me, what type of cassette are compatible to this Hope 4 Pro ?

Good job!

This did not work 👎👎👎

Very helpful, thank you! P.S. I didn't appear to have a hole in which to place the hex key to turn it, perhaps mine's an older model (8 year old DH7 Vitesse), that or it's full of dirt and invisible🙂

explaining in words would be much helpful than the music..at least for myself...

I use Nivea on all moving parts 😂

You will not want to put oil on foam rings before installing dust seals. The pressure in lowers will throw seals out because of oil between lowers metal and dust seals out. Most likely, you will not be able to install seals by hands. You'll have to psess too hard. A special tool is needed Anyway, 15wt (old recomendations) are not as good as Maxima Plush Dynamic Lube Lite (new recomendations by RS for lowers) Ok, seals shold be greased with SRAM Butter

Spero pupi aiutarmi quando ho in problema al cambio mi scattano da sole le marce credi dovrei solo tirare un po fil

what sized thin wrenches does one need for this?

what size are the small allen keys for the 2 screws on the compression?

Marzocchi Technical Manual: "Marzocchi only recommends the use of high quality, SYNTHETIC fork oil to be used in the Bomber forks." "All Bomber forks use SAE 7.5 weight oil stock." 3:45 Motorex RACING FORK OIL 7,5W - MINERAL based oil, does not contain word "SYNTHETIC" in the description. Kinematic viscosity @ 40ºC (cSt) = 34,70 For example: SAE range Brand/product Kinematic viscosity @ 40ºC (cSt) SYNTHETIC based oil: 7,5W Öhlins 1330 20,00 7W IPONE Fork Fluid 7 Racing 22,00 7,5W Shell Advance Fork Oil 22,00 7,5W Liqui Moly Fork Oil Light/Med 22,1 7,5W Motul Fork Oil Factory Line 24,6 MINERAL based oil: 7W Fox Racing Shox 31,82 7,5W Putoline HPX R 32,10 7,5W WP #7.5 33,40 7,5W Motorex Racing Fork Oil 34,70 7,5W Silkolene RSF 7,5 35

Marzocchi Technical Manual: "Use only a silicon or a teflon based grease. Lithium based greases may damage the rubber material." 2:28 Motorex White Grease Description: Lithium-based white lubricant grease

Do you know for certain, with folding handlebars, if it matters if the stem on the forks are threaded or not ? Mine is an ebike if that matters...

Works well but bowl is really shallow.

Lol. Now I got to get a girlfriend so I can pinch her hairspray.Lol

Это та самая девушка, которая озвучивает русских в американских играх-стрелялках.

Wrong !!! there is a fucking distance you should know and mention it .

Thank you for the tip

Not applicable to my rear wheel, there is a locknut that is holding the disc brake, and there is no space to insert the wrench. On the other, cassete side, there is also no space to insert the wrench.

thank you so so much! worked the first time, perfect

Is there an adapter to fit V brakes ? I found a nice fork for a 26 inch to replace a rusted one on a 24. The mounting boss is about an inch off so now the pad rubs the sidewall instead of the rim. Put 26 inch wheels on? Might not fit in rear.

This was helpful. I have an old RCV which is kinda similar & after seeing this I'm gonna change the oil on it.👍

Nice tutorial. Needs something more, somehow That is: a shot of the chainring WITH the chain. To show why it all has to be done in the first place!

9 year didnt matter very straight forward video no nonsense instruction ❤️

Can you help me with replacing 1 piston on my Tech 3 V4 brake ?

I know this is old, but does anyone know if this hub is compatible with newer 12spd cassettes?

Missing parts of the disassemble in this movie, it sucks, you don't know we're the screws are mounted, the shifter is stuck and in this movie he pulls it right of the steering without disassemble.

Stop pissing about and get dh maxxis inner tubes

Hey there, nice Video. But i habe a question, how much oil put in? in ml?

that dint work sit

!!!!! 자세한 영상 감사 합니다