Horizontal Directional Drilling Installation Animation

[@fearlessfarley4765]

I flag for a dirt crew that uses a bore machine and vac trailer. Its not about the machine but how well the crew operates and communicates. The crew I work with hasn't broke any existing lines of utilities in the 4 months I've been with the... it's a great system and least invasive approach to updating utility lines.

[@urbandad885]

I am watching this on glass fibre. Thank you.

[@yoursaltyface]

I was thinking about this while drinking my milkshake

[@x99ribs]

as you do

[@fastlap48]

They just drilled a mile in one go. Can I hire this crew?

[@kaleprice9397]

The head has an 11 degree angled bit on it that holds the locating device that’s installed behind it it tells you depth, posityor negative degrees in (pitch)0.0% is flat plus anything means it’s facing upwards by degree negative is facing down in degrees. The device in the head is held in place and tells you where the tip of the 11 degree angled bit is facing so you aim it up down left or right or anywhere in between to steer your way around throughout obstacles etc. I’ve been operating since I was 16 but that should some up some questions

[@huntermcneely7596]

Getting ready to start green on a crew, what’s the biggest dangers?

[@johnvincentagustindomalant4095]

i have a homework to be done but this is more important.

[@sathishnair5660]

One of best video which cleared my doubts of this type of horizontal drilling. Thank you.

[@lunapetunia3778]

Haha its not that easy .... But yea that's how it works in a perfect scenario

[@vikj1255]

good video, but how does the drill change direction or depth?

[@samanderson7745]

This is a very simplistic definition, it's by no means this easy, haha! Mostly it's hydraulic pressure up at the drill head that will change the orientation of the bit so that when the line is pushed it will move in that new direction. It can't change drastic angles in a short distance as the line can't handle those stresses, but gradual changes are possible.

[@pyronixe]

@@samanderson7745 I’m a novice but thought this was way over simplified. They are drilling near my house and it’s taking a week to go 25 feet.

[@samanderson7745]

@@pyronixe could be a number of reasons for that. There is probably a lot of other underground utilities that they have to work around so they have to have everything located and think several moves ahead while working. That said, are you sure they've only gone 25 feet in a week? It can seem like they haven't moved much but have actually gone a decent distance.

[@steves9027]

My job wanted me to operate this only paying me 21.50$ 🤦🏽‍♂️ yeah right I quit

[@residance6073]

Hello - I’m looking to get an animation like this made. Could you tell me who made this for you please?

[@zackbethard1759]

I've made so much money having to resplice Fiber optic cables because of these machines going through them. Thank you! 😊

[@BHATIVLOGS73]

where are you from?

[@jitudpes]

How much

[@patty109109]

Congrats zack

[@nicholasthehutt]

Now they use those to put in fiber across whole city ! Doing it right now

[@apolotary]

Twitter thread about a woman with a power line in her skull brought me here

[@captainleonardodivichi295]

I've been doing tho for alittleover10 year now. It's a hate /love thing.

[@ghanvass]

Informative animation, but fairly unrealistic horizontal curve.

[@100PercentOS2]

This process of installing conduits is so fascinating. Love the video.

[@briancarpenter6413]

same

[@noecaperon8062]

Been doing it for 8 years I love my job I get paid to play video games

[@Константин-о7ь4к]

Всем похую))

[@jerrybear3081]

driving the worm

[@EDWINROMEROS]

i want to learn!!! could you help me?

[@JeffD-z3g]

will drilling mud be used to remove cutlings during the drilling operation?

[@grafitisjunior]

It's a pretty good way to cross utilities but it's not that easy as they say in that video

[@tropicalpolarbear6939]

Been. Burning now for 12 years started out with a ditch witch 920 then a 1720 and just got a new jt20 but it always ain't that easy

[@supparmanpawar4203]

The drill inserted at 45 degrees angle, but how they straightened it parallel to the surface? Can anyone explain?

[@smith3976]

Your locator will give you a certain percentage to get up or down to to keep the head level. So let's say you go in at a -30% you'll keep going up 10% until you're level and then adjust from there it all kinda depends on the depth you're allowed to be at it and how long your rods are

[@tycho3301]

_Mostly boys and girls, horizontal drilling is sitting around on the clock slowly inching your drill to get hours while traffic control waits for you to get off the road so they can go home._

[@mariuszo5454]

Hi can I use this animation in my page ?

[@Tanmay_Mom]

I feel sorry for you not getting reply after 2 years too I appreciate that you asked for permission

[@jugaldutta1120]

@@Tanmay_Mom 😂😂😂...

[@WBSchoolOfMaths]

Use it ,I am giving you the permission

[@momogunsabah]

How do you know if the head going straight, turn left or right, going up or going down? Thanks

[@Kris-wr6hf]

There is electronic beacon inside the drilling head. Can be powered by batteries or cable. There are different tracking systems (to see the drilling head location) but all of them tells you about the bit location, depth, inclination angle, tool face (that you need for steering), and some optional parameters like batteries status, temperature, downhole pressure, azimuth, predicted depth etc. Reading the information from the beacon can be wireless or through a cable which goes all the way through drill pipes. There are radio, magnetic and gyro systems available for determining the drilling path.

[@MsJinkerson]

how the hell can it drill in a curve like in the example

[@on4acres]

MsJinkerson it’s crazy how these work but it gets the power to steer from the equipment pushing it through.

[@ZY1982]

"Electric"… WHAT?!? It's a freaking adjective!! 😡

[@ducha2941]

Character In the video It's great, I like it a lot $$

[@anupguru.9914]

Good video 👍

[@mistacdawg6882]

Also more potholes, landslide, & earthquakes.

[@scotthayes5933]

Can these drill under railroad tracks?

[@edlo7801]

Yes. In the US, most railroads have pretty deep minimum depths for pipes carrying fluid. Feel free to email me. [e-mail]

[@christianramirez7964]

Scott Hayes yes, rivers too, wide rivers even.

[@gooseygoo69]

Accurate Construction Services Brighton, Michigan. Tell em jr sent ya.

[@consanna]

How do you drill and bore through or around rock formations and or boulders

[@yayomata512]

consanna as a bore operator i can tell you its very frustrating drilling thru boulders and rocks . In little rock you have to “carve” your way thru rocks instead of just pushing it the whole time

[@carlosvillegas8775]

Its a pain in the butt, and you can damage your equipment.

[@bruce7sv]

Pretty amazing

[@nonducorduco9422]

Assistindo no Discovery sciency como é fabricada essa máquina, interessante, vim aqui pra ver como ela funciona, muito bacana. Parabéns a quem inventou essa máquina. Forte abraço. 🤝🇧🇷

[@radosawjankowski6608]

Ktoś to kupił w Polsce? I już przetestował? Na stronie próżno szukać pełnej specyfikacji technicznej!

[@thegamechanger7157]

This is the answer of countries flooding and sewerage system Isn't it.

[@heman8252]

That is my job

[@farukhkhan7313]

Hi

[@rayyanindia]

Can u pls tell me Which software u use to animate ..???

[@TheChannelJ1]

Can you use this to create a water pump? Take water from the ocean and put it in a man made reservoir?

[@beedt714]

If you install the pipes sure, why not? It doesn't really need to be for electrical conduits. I use this method on my plumbing projects many many times. Install a shut off valve and there you go!

[@bobpatterson3686]

Bill Burdick the best damn directional driller ever

[@DerekHundik]

How the drill is directed ? Any video about it ?

[@edlo7801]

There are several methods to know where the drill head is located (guidance systems). It basically boils down to changing the direction of the bit. Try this video or email me. [e-mail]. kzbin.info/www/bejne/mZ2bc3WleLtqnbc

[@gooseygoo69]

Simply via electronics in 2019

[@shobhasharma8755]

Pagla

[@robertoday5279]

my company does this i just can never talk to the operator because im doing safety overwatch

[@tamarabeatriz7298]

You can choose for one of the above gifts

[@preethubratatarafder3755]

aaa

[@williamadjei5226]

I need some one who can get me a auger horizontal drilling machine for job. (In condition )

[@alanhaungs4696]

Can this penetrate the hard rock? What is the range of distance per time for various materials it is drilling through?

[@Tonyclarkthesailingspark]

How does the drill operator make the head move up or down or left and right ? Is the speed or what ?

[@rbnhd1976]

It isn't drilling, it's pushing the head thorough, there's a slanted shape on the front that can be turned, which pushes the head to the side, all the time. To go straight, turn the head often, all the way around. The guy with the detector follows it at all times. At least, this was how it was explained to me

[@SebastianJaramillo-du3zu]

Can i make some.money in this industry as a crew?

[@trickmannan]

Im job to-do would like preschool triple

[@ЗлатаВоробьёва-о4у]

「動画の音が良くない」、

[@abderazakguidoum423]

لماذا لا توجد حفارات لإنقاذ الطفل ريان

[@michaelcostello6991]

Great video. Great clarity. Thanks

[@kumariyer9036]

Can you send me HDD profile making app

[@trickmannan]

Yes sir plzz

[@adibmi123bangkumis4]

Inbok number yes.081220549142 thank

[@kumariyer9036]

Your process very good to avoid more depth & to reduce length. Thanks

[@elijahmedley9705]

Lol I make these at work

[@rajnishdutta887]

One of the best video

[@stasnazarenko9379]

Кто нибудь объясните как он поворачивает?

[@danny8005]

Did that last week

[@calebbuck6767]

Who's here from Twitter

[@mohitporwal6118]

mujhe ek 18 ton capicity ki hdd mc japanees make kee purchage karna he

[@Ranveer_Singh_Kahani]

Wow so easy..

[@ramdomshits1624]

This is nice

[@HoangNguyen-ij9pe]

Good video !

[@kelseysmith9158]

Love the video!!

[@mehuljadav2105]

Exillent tachnologoi for hdd

[@AnkitSharma-uz8hx]

Pretty Amazing

[@comedyroads247]

can you clarify me how the metal driller bents?

[@tigerbatman7881]

Ash king god allows it too

[@hanumanpatel7857]

इसकी कीमत बताओ कितनी है

[@mdafaque9455]

God work

[@frankenfishdom]

what software was used to make this?

[@rayyanindia]

Can u please also tell me which software is used if you figured it out.

[@eng.sohail1395]

Do you want contract with saudi Aramco.?

[@ibrahimalays2320]

Can you provide one

[@techmonster2632]

Pakistani lier

[@marcoslucena7723]

very good

[@aklal4668]

How driller changes direction and how it goes up and down??

[@edlo7801]

kzbin.info/www/bejne/mZ2bc3WleLtqnbc

[@williamadjei5226]

It have a steering, Contact me for more information.

[@yayomata512]

Ayush Lal theres usually a locator which can be in many different brands such a “ falcon F5 , subsite, ditch tracker 150 and ect. “ someone who knows how to read the pitch can guide you with a cloak type system . For example if you want to go up you push 12, going down push 6 , push 9 you go left and so on .

[@SAM-jf2yr]

The biggest drawback of this machine, wheels of this machine damages the road while moving or working on the road.

[@raviranjan5494]

SAM how long can it drill???. I have found a abandoned cable passing Underground across my home. I think someone has done horizontal drilling

[@gooseygoo69]

Fake news.

[@OscarDiaz-nn9ch]

How much does that drill cost

[@williamadjei5226]

Hi , I am a driller in African who won't the answer for the same question. Please let me know if you get it.

[@yayomata512]

Oscar Díaz a typical JT20 brand new will about $80k . That size of machine that looks about a jt2030 would roughly be about $150k

[@williamadjei5226]

Okay thanks

[@williamadjei5226]

I have a set of drilling crew. We need, auger horizontal drilling machine. If some one can get us any for job. With condition

[@yayomata512]

William Adjei you could talk to companys like ditch witch and vermeer for a horizontal bore drill

[@johnrohlfs2223]

GravE digging NASA Vade Beasley first Astronaut at Restaurant noon moon lunch and luanch alien Grey, FBI Commander Roll meals, Colombia moon,dark SiDE, from Grandson John Robert Bruffett Junior 🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸 marines covenant alien movie

[@eldstgilmorbarboydodellatb4413]

💚🤘🏿

[@playback1109]

Substitle

[@repairdrive]

Typical bore crew, not pot holing anything.

[@SachinKumar-pg3jf]

sar enka mobile number Mel Sakta h kya

[@buddy8559]

How do you turn it left right up and down? that is the question i am needing answered