Рет қаралды 28,558
This feeder has been so amazing and works perfectly! I love it so much I want Jake to make me another one 😁
This was inspired by the Feeder over at Lumnah Acres. We made it much smaller though :)
Materials List:
(7) 2x4x8'
(1) 4x8 Sheet of 1/2 Inch Plywood
(1) 1x4x8'
(2) 2x2x8'
(1) Horse Panel - for the Hay feeder(we bought a whole panel to make multiple feeders)
(4) galvanized Fence Staples
(6) 1/4 Cable Clamps
* 3 Inch Torx Deck Screws
* 1 1/4 Inch Torx Deck Screws
* Roof Material Your Choice/ We used Corrugated Metal
Cut list:
Cut Four 2x4's to five foot long, use the other pieces that you cut off to cut 4 18 inch 2x4's and two 2 foot 2x4's.
Cut two 2x4's to 42 inches
Cut one 2x4 to 45 Inches
Cut 4 pieces 3/12 pitch 23 1/4 long
Cut 2 pieces of 1/2 inch plywood at 24 inches x 48 inches (for roof)
Cut 1 at 24x42 inches (bottom tray)
Make 16x42 inch(outside dimension) frame with the 2x2's
Cut Horse Panel into two pieces 24 inches tall x 38 1/4 inches wide
Cut two triangles out of Plywood for the gaps on the side 13 inches wide 24 inches tall.
Goat Items we LOVE:
Gloves for Washing Goats
amzn.to/39lhsrX
Bucket Hooks
amzn.to/30mlmwP
Hoof Boss
amzn.to/2wcvUDB
Weight Scale
amzn.to/2YsG8tI
Subscribe:
/ @johnsonfamilyfarmstead
Hello! Welcome to our Farmstead. Thank you so much for subscribing. Jake gets so excited for new subs! We are not your average homesteaders you see on youtube. We have fulltime jobs! What! How do we do all this! I'm not going to lie sometimes I want to sell it all and move into a condo but that is usually short-lived and in the dead of winter! Tune in to see what we are up to!
#johnsonfamilyfarmstead
FACEBOOK: Johnson-Fami...
Mail:
Johnson Family Farmstead
PO BOX 272
COLUMBIA CITY, OR 97018
Email: Johnsonfamilyfarmstead@gmail.com