Why YT decided in 2023 that I need to watch that wideo?
@rengewwj8 жыл бұрын
I did this for 45 years. Yes, there can be sparks. But, once the first hint of penetration happens with the pilot drill bit, the process is stopped and the pressurized contents of the pipeline are used to push out any entrapped air, leaving the entire cutting mechanism fully bathed in pipeline contents with zero air/oxygen. For extremely dangerous pipe contents, the cutting machine and the valve/attachment assembly is flushed with nitrogen until there is no air left in the assembly, before any cutting is started.
@ahmadmasribinabdullah26347 жыл бұрын
i want study
@FreethemGuyz5 жыл бұрын
rengewwj anybody with one brain cell can tell you know exactly what the fuck you talking about
@mohammedbilal72935 жыл бұрын
Sir, I am from KSA. Is this hop tapping possible for RTR non metallic pipes. And also if there is any procedure to stop the water in the main header by tapping. Here is kSA plant are ready to handsome amount for these as to avoid isolation
@jameswanjohi16294 жыл бұрын
What live pressure oil pipeline
@maxheadroom15062 жыл бұрын
I understand how this adds a T but how do you install a shutoff valve to cap one end of the pipe?
@aidabautista3816 ай бұрын
Excelente video, muchas gracias por compartirlo...
@miguelmedina80716 жыл бұрын
what is the program to make the simulation?? very impressive
@NxroProductions4 жыл бұрын
I searched how to tap (on guitar) and here I am
@j.l.i11434 жыл бұрын
Hahaha
@aidabautista3816 ай бұрын
😂
@tahudikit823 Жыл бұрын
what the maksimum temperatur of service applicable for hot tap process?
@hieptruong56646 жыл бұрын
Thank you for your video, Now, I want to insert the themowell into the CT pipe without water leak to outside. So, what should I do?
@vladimirdazacuadros43427 ай бұрын
RAAAAAA!
@tls58707 жыл бұрын
So metal shavings get introduced to the water supply? No way to avoid that I guess...
@lips9736 жыл бұрын
Yes, but if it's a heating system it's less of a problem as people are not directly drinking the water
@effervescentrelief5 жыл бұрын
Hopefully there's a filtration system.
@rengewwj2 жыл бұрын
Many demonstrations have shown that almost 100% of the shavings just fall where they're cut and quickly rust themselves into a little pile. For sensitive systems, a strong magnet can be lowered down into the pile to retrieve most of them.
@pejaz8415 жыл бұрын
nice lesson for me, thanks
@uniamosir6 жыл бұрын
Bravo video! make me learn more about it
@jagdishantithesisnuskekuma21065 жыл бұрын
Sir , hamein nagar councel se water supply wala pipe atta hai half inch tapping karne wali dye ka name batayein
@MrPrasanth198713 жыл бұрын
so during drilling there is a chance for heating or spark right??
@rengewwj2 жыл бұрын
Yes, but the entire internal area of the fitting, valve, and hot tapping machine can be purged with nitrogen or pipeline contents to displace (remove) any oxygen. Thus, no danger.
@TheRealFOSFOR8 жыл бұрын
Don't think there needs to be oxygen to produce sparks.
@alejandroquiroga13 жыл бұрын
no so that there is a spark, there needs to be oxygen
@allamsantos80954 жыл бұрын
Brasil!
@charlieyan13577 жыл бұрын
Our company Anhui Tongfa Equipment Co., Ltd is professional manufacturer of pipe hot tapping machine for water and gas pipeline in China since 1994 . We have models of hot tapping machines as below : ZG2-50 Manual Hot Tapping Machine for cast iron pipe, ductile iron pipe, concrete pipe, PE, PVC pipe ( tapping diameter 20-50mm) ZG2-100 Manual Hot Tapping Machine cast iron pipe, ductile iron pipe, concrete pipe, PE, PVC pipe (tapping diameter 80-100mm) DK6 Electrical Hot Tapping Machine Series for cast iron pipe, ductile iron pipe, concrete pipe, PE, PVC pipe . DK6-200 ( tapping diameter 80-200mm) DK6-400( tapping diameter 300-400mm) DK6-600 (tapping diameter 500-600mm) DK6-200B( improved model, tapping diameter 80-200mm) DK6-200C( improved model, tapping diameter 80-200mm) DK8 Electrical Hot Tapping Machine Series for steel pipe but also suitable for cast iron pipe, ductile iron pipe. DK8-300 ( tapping diameter 100-300mm) DK8-600( tapping diameter 400-600mm) DK8-800 ( tapping diameter 700-800mm) Also we are the manufacturer of tapping saddle, leaking pipe repair clamps, pipe cutting machine . We have the large range of sizes of tapping saddle, leaking pipe repair clamps for different pipe OD . You can feel free to contact with me by below contact information . Charlie Yan Sales Manager Anhui Tongfa Equipment Co., Ltd Add: Changjiang E-Commerce Park, Wanjiang Dadao Road, Anqing City, Anhui Province, CHINA Tel: 0086-556-5220356 Website: ahtongfa.en.made-in-china.com/ www.ahtongfa.com Email: sales@ahtongfa.com
@baladar13537 жыл бұрын
Thank you buddy, have you ever tried to advertise on a site that is reserved for ads?
@peteharrison98165 жыл бұрын
Done 100 of them
@user-hv9ej4zz9z5 жыл бұрын
잘보고 갑니다 감사합니다
@gardenroute14 жыл бұрын
Hello, I'm working for Hot Tapping & Stopple projects, contact me here if you ave any questions.
@bijaysahoo21836 жыл бұрын
Can I get one method statement for doing hot tapping
@mohammedbilal72935 жыл бұрын
Sir, I am from KSA. Is this hop tapping possible for RTR non metallic pipes. And also if there is any procedure to stop the water in the main header by tapping. Here is kSA plant are ready to handsome amount for these as to avoid isolation