Hot Toys Iron Man Mark 3 Diecast 2.0 Unboxing & Review

Hot Toys Iron Man Mark III Diecast 2.0 1/6 Scale Action Figure Unboxing and Full Review @Hot Toys Official
Where I got mine:
Iron Man Mark 3: popcollectibles.store/product...
Discount Code 5% off: JUSTINSCOLLECTION
Fusion Reactors: / fusion_reactors
For more videos stay tuned! Feel free to check out the social links below for hints at upcoming videos and more!
Facebook: / justinscollection
Instagram: / justins_collection
#HotToys #IronMan #IronManMark3

[@joshvilar2582]

The Mark III is still my favorite Iron Man armor. It's just so iconic and it gives me nostalgia of the first Iron Man movie and the fact that they actually had scenes where it was practical instead of CGI makes ot so much better.

[@JustinsCollection]

It's the best!

[@DanielSala86]

To me... The Mark 3 is the best Iron Man armor... I guess is nostalgia... but to me it is! I am excited about getting this figure in hand. Thanks again for the review Justin!

[@cinnamon-skateboarding5987]

It’s not nostalgia, I assure you. The mark 3 was a design marvel, it’s objectively better in design and function than anything later on in the films.

[@JustinsCollection]

So good!

[@HappyBirthdayRoboto]

As time went by the designs became too sleek, the Mark 3 had just the right balance of mechanical function and hot rod style. When I think of Ironman that's the image the comes to mind.

[@ZeerXX]

The Mark 3 is the only suit that they took on a mechanical engineering approach to. They actually made the whole suit, where the rest were just pieces and filled in with CGI later. It is arguably the most bad ass looking suit with the mk7 a close second.

[@BoyBlunder66]

Yeah. I think I'm more positive towards the later suits, especially the nano-suits, than most, simply because I like how blatantly comic-booky they are, but there's no beating the practical look and feel of the originals.

[@PM-oq8dg]

The first HT I bought was the original Mk3 -- the one that faded to pink. When I first got it, I was so amazed. That said, all these years later I am so excited to upgrade. Thanks for the review. Will keep me until mine arrives.

[@JustinsCollection]

A lot of us started with that bad boi! Such nostalgia

[@johnrhogan2908]

I've mentioned before, but I love how Hot Toys is updating previous releases.

[@JustinsCollection]

I love it too…sometimes

[@trevondenman7385]

Fantastic figure! I always click your videos when they appear in my feed and you never disappoint! Well done

[@JustinsCollection]

Wow, thanks!

[@MMSR_Reds]

just got mine and I'm so happy with it. Diecast 1.0 was such a huge let down for an iconic suit. I'm so glad that they decided to remake this. Thank you for the review, I had no idea this guy had so many hidden gimmicks.

[@JustinsCollection]

Fair!

[@YourUserNameSucksx10]

Finally, been waiting for your review, didnt disappoint

[@JustinsCollection]

Thank you!

[@Linda-hf7vr]

I’ve got that Stealth MK 3 and he is truly a cool figure, love that color scheme. This new figure looks awesome. And YES, we need a die cast MK 2!!!!

[@JustinsCollection]

Such a sick suit, we do need that MK2!

[@mcguzman5398]

Justin I just want to let you know that I love your reviews. Keep up the great work!

[@JustinsCollection]

Glad you like them!

[@michaeldelcastillo7211]

Thank you for doing the ground pound pose and doing the 360! Glad they innovated from the original so that we dont have to switch out the torso. Cant wait for mine!

[@JustinsCollection]

No problem!

[@flavioshouseofcollectibles1563]

Hell yea can’t wait to watch on my lunch break 😎👊🏾

[@JustinsCollection]

Hope you enjoy!

[@nickolasip1010]

Your review is the mostly anticipated one in KZbin. Thanks Justin

[@JustinsCollection]

Thank you!

[@jasonl1942]

I own the three lifesize sideshow iron man statues ( two mark 3s and a mark 7, I repainted one mark 3 to be a mark 2), and I STILL love collecting these figures.

[@JustinsCollection]

Dope!

[@GuyWebz]

Mark 3 is one of my favorite Iron Man movie suits, it’s so iconic and classic yet believable and practical

[@JustinsCollection]

Agreed!

[@dbg5081]

Your lighting on the figure really makes it look amazing.

[@JustinsCollection]

Thank you!

[@Phar2Rekliss]

I finally got mine from Sideshow on Saturday 5/11/24. Waited 2 years for my waitlist. I got the special edition! I get mine wednesday delivered!

[@JustinsCollection]

Dope!

[@TKMagicShop]

Justin, I LOVE the lighting in your videos. That white review table is game changer!

[@JustinsCollection]

Thank you!

[@Juply]

I don't know why, but your videos are so satisfying and calming. Keep it up 🫶

[@JustinsCollection]

Glad you like them!

[@lynnpachano9847]

Mark III was my second HT - plastic with the pink color issue. He is one of the best iron man. Nice review Justin

[@JustinsCollection]

Thank you!

[@kevin_ryujie9003]

Thanks Justin for this awesome review!

[@JustinsCollection]

No problem!

[@kirbymarchbarcena]

One feature I really like is the detailed face/head sculpt

[@JustinsCollection]

Nice!

[@SupermanClub]

Great video. Your last iron man pose is incredible! Will do the same pose when I get my Mark 3.

[@JustinsCollection]

Thank you!

[@marcakins3373]

Man, this freakin looks amazing…I love everything ❤😂

[@JustinsCollection]

Me too!

[@obxnice]

Another awesome iron man fig. And your rt. To me that scene were he shoots the missile at that tank and walks away is literally my favorite action scene from all the iron man movies. It’s just so as u say” bad ass”

[@JustinsCollection]

He is so good!

[@Muffinareverynice]

It’s even better that the shoulder missiles are backwards, makes it worth more money

[@JustinsCollection]

Oh lol

[@camtron1967]

The mk3 is one of my favourites. Personally I prefer the mk7 but the mk3 might be second. It’s the definition of iron man

[@JustinsCollection]

Fair!

[@JesusMsan]

I'll have to wait 3 months or more to have it in my hands (thats the problem in Spain or Europe) but seeing this review makes me to be even more exited! Thanks for making this reviews, you are great!

[@JustinsCollection]

Worth the wait!

[@marwanalghamdi7359]

The Mark 3 had dark maroon paint rather than red. But Hot Toys and other toy companies never get it right. The first Hot Toys Mark 3 released back in 2009 had the correct maroon paint. But still, this one looks much better than the awful 1.0 candy apple Mark 3 released in 2015.

[@JustinsCollection]

A more wine red after the colour grading but this is close

[@Ecto_Eric]

This suit & figure is amazing ❤❤❤

[@JustinsCollection]

He is!

[@weisengpin316]

Now this made me looking forward 2.0 version of Mark 42/43

[@JustinsCollection]

Nice!

[@chrisburrelljr9270]

Yay another iron man figure

[@JustinsCollection]

Lol

[@craigmildenberger5918]

I love the mark 3 suit its so cool

[@JustinsCollection]

Agreed!

[@Plastic_Spaceman]

Glad I preordered this bad boy.

[@JustinsCollection]

Nice!

[@thomasjcollectibles]

Looking forward to seeing this review. I got him as well and I'm so glad I did.

[@JustinsCollection]

Noice!

[@Mech45pro]

Justin Technically in the hall of armor the mark 3 has its battle damaged,plus it's particularly clean plus one of the arm missile is exposed plus the crash helmet is at its feet

[@JustinsCollection]

Oh sick!

[@Clarkzarro7828]

You're one of Coolest KZbinr on your Channel. You're always Delivering Something New on Time. Great Amazing Job Justin!

[@JustinsCollection]

Thank you so much!

[@Clarkzarro7828]

@@JustinsCollection You're Most Welcome Friend! 🤝

[@charlietheunicorn5383]

This is the Iron Man you are looking for..... I'm more in love with the Mark 5, but this redesign is 10/10 for the Mark 3. GG Hot Toys.

[@JustinsCollection]

Yes!

[@DrDetfink]

The original does have the flip faceplate helmet but that’s where the comparison ends. I cannot wait for Hot toys to ship mine. I missed out on the original. I am doubly happy to get this remake/re-sculpt.

[@JustinsCollection]

Agreed

[@jamesburr25]

Hi Justin, Have you attempted or will you attempt to fix the shoulder dart launchers which were on backwards? I received my Mark 3 today and have the exact same assembly issue? If you have fixed them what did you do?

[@JustinsCollection]

Not yet! But I will at some point!

[@furkn7771]

Best figure channel ❤

[@JustinsCollection]

Thank you!

[@redfox_gamer9996]

Hey i was wondering if the 1.0 version is still available for purchase and if it would be more affordable?

[@JustinsCollection]

Not sure

[@joshsymons2104]

Oh man I've been eagerly waiting for this vid, as I really wanted to see the paint work under your lighting! Great review Justin. I'm trying to come up with reasons not to buy this, cos it looks stunning and... nostalgia. 1 - I wish they had've done the same base as the Mk 1 & new classic comics Iron Man, just so there was a bit more continuity with the releases. The Justice League figures all look amazing on the identical stands. How good would Mk 1, 2 & 3 look all on those stands?? 2 - I would have liked a head / helmet with the flip up magnetic visor. 3 - A shame we didn't get USB lighting. There are some great customisers doing it (I dont mean Fusion reactors etc. Its just 1 plug & wire for all the lights) but its an expensive process and it can limit the articulation slightly. Maybe one day Hot Toys? I never realised how tiny Mech Test Tony is! Wow. Tiny Tony. And a new Mk 2 must happen now!

[@JustinsCollection]

Yeah I agree, keep everything consistent. That visor magnet feature should have been included 100%. They need to investigate better power options!

[@jasongradyphstiger6179]

This is awesome also I really wish he comes with a hand To replicate he took off his repulsor gauntlet when Obadiah shows up.

[@JustinsCollection]

Oh true that would have been dope

[@nostalgicdouchebag1912]

The shoulder gap has the easiest solution ever that even threezero knows it, yet hot toys still doesn't know, it's to make the shoulder ball piece bigger and extend out for articulation

[@JustinsCollection]

Yeah agreed

[@Wellplayed005]

Great review as always, keep it up dude.

[@JustinsCollection]

Thank you!

[@Wellplayed005]

@@JustinsCollection do you know when the tobey maguire no way home hottoys figure releases?

[@Jjangbunbun]

Breathtaking

[@JustinsCollection]

Agreed

[@maverickslb80]

My favorite Iron Man armor.

[@JustinsCollection]

Agreed mine too!

[@Mech45pro]

This is still my favorite suit

[@JustinsCollection]

Nice!

[@mondayworship390]

Justin, any tips on getting the two base pieces to fit together easily? Is it just brute force or heating up one part?

[@JustinsCollection]

A bit of heat should do it

[@mondayworship390]

@@JustinsCollection I introduced the bottom part to my kettle, after a decent steaming and with some “persuasion”…sorted. 👌👍

[@RedMetalSuit]

It’s so good!

[@JustinsCollection]

Yes!

[@reginrextosco4918]

Always superb review 😊❣🚀🎉

[@JustinsCollection]

Thank you!

[@hi-yg8ql]

hi Justin, I am new to hot toys, I would like to ask if you would recommend this mark 3 or the mark 85 battle damage, I am struggling between these two.

[@JustinsCollection]

Depends if you want to commemorate Tony at the start or the end of his career as iron man. Which film means more to you?

[@hi-yg8ql]

@@JustinsCollection I will say endgame,thx for the advice

[@jihoonoh6605]

Best ironman suit mark 3

[@JustinsCollection]

Yes!

[@joe.the.collector]

Yep my shoulder darts are the wrong way round too annoyingly. I’ve tried to heat up and remove the pin but it doesn’t want to budge! 😢

[@JustinsCollection]

Damn!

[@jmd1861]

I have a hunch they're going to keep doing all odd numbered suits and updating those, then they'll go back and update all the even numbered suits.

[@JustinsCollection]

Maybe!

[@xiuzhendai210]

Woah I made it here :) As a dude loving iron man I was waiting for your review awesome! I at first wasn't sure to buy but after watching your review I do now thanks and also thanks for the discount :) Take care

[@JustinsCollection]

No problem!

[@xiuzhendai210]

@@JustinsCollection Hello Justin I have a question. Is the damaged helmet bonus piece made of plastic or also diecast? I was wondering as in another review someone mentioned it was diecast so I am not sure. Thank you.

[@Satire_Filmz]

@@xiuzhendai210I believe it was die cast.

[@EvaUnit1301]

WOW this is such a win xD I keep thinking I’m done with buying new IM figure but man look at HIM. I just got the IV 1/4 scale 😂 gonna be a while but this one will definitely be coming home one day.

[@JustinsCollection]

Worth getting for sure!

[@bradnaeser8155]

Hey Justin, where did that little piece of rubble come from that you have him standing on at the end of the video? Is that from another figure, or a 3rd party accessory?

[@JustinsCollection]

That came with the Iron Man MK43 I think but I could be wrong

[@trembledust6819]

aww @ mini missle pods. Any chance of getting replacements that are correctly painted? Thanks for vid!

[@JustinsCollection]

Should be easy enough to fix myself fingers crossed

[@trembledust6819]

@@JustinsCollection Good luck

[@DerektheMenace]

Looking at the blogger pictures shows that they made all the “dart launchers” for the shoulders flipped 180° (backwards). If they were made like the ones on the Mk. IV and VI then it might be possible to push the pin out that connects the launchers to the shoulder pieces and then reverse it. However, I would demand that HT’s replace them for all the batches that have been shipped and correct them for all subsequent shipments considering the price point of these collectibles.

[@trembledust6819]

Gotcha@@DerektheMenace

[@Jhink17]

I want this figure soo bad!

[@JustinsCollection]

Get him!

[@captainrexdastarwarsgearhe2461]

The only gripe I have with this figure is I wish they used some of the effect pieces from din djarin for the Dart launchers and missles it just feels weird not being able to actually remove the missle and put in a effect piece

[@JustinsCollection]

True that would have been dope!

[@xxSMAMICxx]

Do u think the quarter scale or this one is better? If size wasn’t the determining factor.

[@JustinsCollection]

This one!

[@xxSMAMICxx]

@@JustinsCollection considering if I should sell of my quarter and get this or keep the quarter and have it like the center piece of the iron men

[@williamoxley5254]

Can’t wait for that Hera Syndulla video.

[@JustinsCollection]

Soon!

[@flyersgoji676]

Grabbing this and the classic iron man as my first iron man hot toys. Skipped the first classic cus I didn’t like that clear plastic

[@JustinsCollection]

Fair

[@iron-jack84]

Great review as always!!! The Mk3 is one of the best by far. I'm very undecided about what to buy... based on your experience, which is the best? This latest mk3 1/6 scale or the 1/4 scale version? They are both awesome!

[@JustinsCollection]

Thank you! I prefer the 1/6 version

[@iron-jack84]

@@JustinsCollection thank you! Actually the 1/6 version seems much more accurate

[@mondayworship390]

There it is 👌👍

[@JustinsCollection]

Yes!

[@TheGoofyGoobler]

they should make a darkhold ironman fig, it'll be so frickin awesome!

[@JustinsCollection]

What would that look like?

[@TheGoofyGoobler]

you should check out the comic, if you're a fan of body horror

[@Draconis84]

Excellent review as always! Not my favorite Armor but still A favorite so I ordered mine off of Mand****e I've got many rare Iron Man figures from them including XLVI and VI.

[@JustinsCollection]

Thank you!

[@BigJohnCreations]

Great review! Is it possible to fit a HT human hand on it, instead of the armored hand, to mirror the final battle in the movie?

[@JustinsCollection]

Not sure unfortunately

[@Batman-ky9wo]

Any word about HT offering replacements for the incorrectly painted/assembled dart launchers?

[@JustinsCollection]

Not sure!

[@Batman-ky9wo]

Have you heard/seen that EVERYONE received them incorrectly assembled or some were done properly?

[@91Pulp]

It's perfect.

[@JustinsCollection]

It is!

[@sethkyllo6437]

hope they do an updated MK2 the old one is so expensive 😭

[@JustinsCollection]

Agreed

[@mondayworship390]

From what I’ve seen from the other videos the dart launchers are all “backwards” 😮😢. I wonder if Hot Toys will issue replacements?

[@JustinsCollection]

Damn!

[@mondayworship390]

@@JustinsCollection yeah I know. I’m sticking with my v1.0 but I did spy on eBay someone selling the v2.0 accessories which I’ve picked up (mainly for the crushed helmet) and should receive shortly . I think the dart launchers will be the same BUT if they turn out to be the right way round, they’re yours if you want them (or indeed if they’re wrong and you fancied trying to “fix”).

[@corietherrien8818]

Hot toys love iron man and I don’t know why but I’m not complaining! How many iron man figures have hot toys made? Cool video!

[@JustinsCollection]

So many haha

[@juliasierra1776]

I wish I could afford this guy.

[@JustinsCollection]

Damn

[@nostalgicdouchebag1912]

Have you done 1/6 mark 45 review? I can't seem to find it

[@JustinsCollection]

I have not unfortunately

[@nostalgicdouchebag1912]

​@@JustinsCollectionbut you do have the figure right?

[@LMedina1021]

I remember my cousin showing off this figure 1.0 now I can show off this one

[@JustinsCollection]

Oh wow!

[@JoanieAdamms]

Justin, should I dare to venture and grab my first Hot Toys Iron Man figure? - It is the Mark 46... My fav.

[@JustinsCollection]

That one is dope!

[@WillemDafoeOfficial]

Hell yeah! Get it, the MK46 is bloody amazing

[@galactus9807]

27:37 are you gonna have him with the battle damage pieces in the hall of armor display like. It movie where it had battle damage on the chess

[@JustinsCollection]

I think he's wasted in the hall of armour

[@tecuentodemishobbies708]

Hello Justin, greetings! Great Review as always! I thought this figure was going to have the USB option for the lights, it's a shame it doesn't, but it's still a great figure, I can't wait to get mine! Thanks for the review!🙌

[@JustinsCollection]

Thank you! Yeah they didn’t do it unfortunately

[@CyberBee101]

❤ big review bro ❤😅

[@JustinsCollection]

Yeah!

[@jorgecabezas1966]

To be honest, instead of adding battle damaged parts, they should make full battle damaged figures like they did to the mark 85

[@JustinsCollection]

Agreed

[@Cookiepuss2289]

So Justin does this take the crown for your personal favorite Iron Man figure or is it still the battle damaged mark 85??

[@JustinsCollection]

Yep it’s my new favourite!

[@Cookiepuss2289]

@@JustinsCollection wow! didn’t expect that! I may have to pick this up lol

[@mucknstrunz]

I got weak and ordered this guy yesterday. It is just too good to pass up. Already have the Mark 4 Diecast and Love it but I always wanted a good version of the OG Armor designed by stan winston studios, where they put actual thought in how the armor works. The prvious Mark 3s in 1/6 were all lackluster IMO. This time they finally got it right

[@JustinsCollection]

Yeah he's dope!

[@BoyBlunder66]

In fairness, I think that even in the original movie he's quite a bit taller when fully in-suit.

[@JustinsCollection]

Maybe!

[@bunnyfreakz]

Sad you don't do comparison to latest Armor such Mark 85.

[@JustinsCollection]

Oh sorry I try to keep my comparisons in context to the line or film etc

[@Awesomer18real]

Have you done a vulture hot toys review before?

[@JustinsCollection]

They never actually released it so nobody has

[@Awesomer18real]

Ah that would be a cool figure

[@ChandlerPrice-ct8oj]

I love the mark 3 side note I forgot when the friendly neighborhood Spider-Man from hot toys is coming out do you know by chance?

[@JustinsCollection]

Not sure!

[@ChandlerPrice-ct8oj]

Oh ok

[@pablofernandez8027]

🔥🔥

[@JustinsCollection]

Yo

[@Jjangbunbun]

29:15 wow badass

[@JustinsCollection]

Thanks!

[@wesleyrios1816]

Hello from Brazil. Mk3 taller than mk7?

[@JustinsCollection]

Not taller, no

[@evanduran1642]

I want one so bad! Just can’t bring myself for the high price point

[@JustinsCollection]

Fair enough

[@annabell2147]

Even though hot toys figures are getting hyper realistic im glad their still using plastic for the hair

[@JustinsCollection]

They are doing rooted hair too lol

[@jorgecabezas1966]

23:18 I hope someday hot toys make iron monger and wiplash diecast

[@JustinsCollection]

Agreed

[@supaidaman3767]

I really hope it comes with a bare left hand, so I can recreate the final battle scene in iron man 1

[@JustinsCollection]

That would have been dope

[@supaidaman3767]

@@JustinsCollection or with the tony stark head sculpt inside the helmet and display him with suit up gantry like the iconic "suit-up scene"

[@GamingMarioYT]

Hey Justin, would you ever display Iron Man Mark 1-7 in the hall of armor? Like in Iron Man 3

[@JustinsCollection]

Negative, I want the freedom to pose them or with the Tony sculpts

[@GamingMarioYT]

@@JustinsCollectionfair enough

[@user-ve5rj9bt5g]

Awesome but still the bulky shoulder armours bit off

[@JustinsCollection]

Nah it looks right to me

[@ricechungus]

this figure is fucking beautiful!

[@JustinsCollection]

So good!

[@carlocayetano9287]

Nice review Justin. It’s a shame that the shoulder guns aren’t assembled properly. If you would look back at the promo photos a year ago, the prototype’s guns are assembled backwards as well. I hope they would have it corrected moving forward.

[@JustinsCollection]

Not ideal at all, I wonder why they did that!

[@Destiny_S_Bitch]

Justine ❤

[@JustinsCollection]

*Justin :P