HOT TUB Pump Seal and Motor Bearing Replacement

HOT TUB Pump Seal and Motor Bearing Replacement
This video will show you how to replace the hot tub pump seal and motor bearing.
❤ SUBSCRIBE - www.youtube.co...
❤ FACEBOOK - / vippoolandspa
🎁TIP JAR - PAYPAL: paypal.me/vipp...
-----------------PAID LINKS BELOW------------------------------
✔ Multimeter
amzn.to/3TgO1i0 CANADA
amzn.to/3Tcb0dQ USA
✔ Capacitor Tester
amzn.to/3FnZ42V CANADA
amzn.to/42476YF USA
✔ Motor Bearing Puller
amzn.to/3C1UhlM CANADA
amzn.to/3C1UkxY USA
✔ Pool Teflon Tape
amzn.to/3qxIG8p CANADA
amzn.to/3BNTANP USA
✔ Volts and Amps Tester
amzn.to/37qsKyA CANADA
amzn.to/3Mej4Gl USA
✔ Pool and Hot Tub Wrench
amzn.to/3KWmdKI CANADA
amzn.to/3vtslDv USA
✔ Pool O-Ring Lube
amzn.to/3Eq40mq CANADA
amzn.to/3KVn2Du USA
✔ Pool and Hot Tub Silicone
amzn.to/3JTkCnA CANADA
amzn.to/3uRwj9V USA
✔ Pool and Spa Wrench
amzn.to/37XbbGz CANADA
amzn.to/3KVn2Du USA
😎 Join this channel to get access to perks:
/ @vippoolsandspas
#hottub #jacuzzi #beachcomber #pentair #waterway
Legal Notice: Any electrical connected to your hot tub or spa should be worked on by a licensed electrician.

[@VIPPoolsandSpas]

We are getting very busy with KZbin and our video comments. At the same time we are trying to run a pool and hot tub business. Unfortunately, we will limit our comment responses to our Members. Consider becoming a Member: kzbin.info/door/7rBDbZ5XT4QtOouN6PTKXQjoin

[@ManNomad]

Was repairing plumbing on my spa turned off the breaker and when I powered back up, the keypad (TSC-19) lit up 100% all LEDs and never reset to normal operation. If I unplug the keypad, the pump, heater run. Plug it back in and same lit up keypad and everything shuts off, all leds on. Easy Pack EP1500CX1 controller (It usually resets within an hour but not this time. Is it a keypad? or the controller? Thanks

[@joefriday950]

Tganks for the video

[@billwillis4402]

My pump is really loud, so I assume that I need to replace the bearings inside the motor. I also need to get a bearing puller. Mine is a Waterway Executive 56. Where can I find those parts?

[@VIPPoolsandSpas]

All the links for the tools we use are in the video description.

[@Gooditalian]

Did you forget the link for the puller?

[@VIPPoolsandSpas]

amzn.to/3C1UhlM CANADA amzn.to/3C1UkxY USA

[@ManNomad]

Was repairing my spa plumbing and when I powered it on - The keypad lit up 100% all leds solid and it did this before after an error but after about 30 min it started working. This time nothing reset and keypad is still lit up 100%. (Powered it off and on few times. When I unplug the keypad from the board the pump, heater start working. Is it a keypad (Gecko TSC-19) or the board/controller that is bad?. I do not want to buy a keypad if the bord is bad. The controller is an EasyPack EP1500CX1 digital single LED for the pump with the side color coded rectangular plugs.

[@VIPPoolsandSpas]

It sure sounds like the topside.

[@ManNomad]

@@VIPPoolsandSpas Thank you so much. I'll replace it and let you know how it went. Really appreciate you taking the time to reply.

[@VIPPoolsandSpas]

@@ManNomad all good.