Easy DIY Shop Vac Upgrade Hacks

[@HouseDoctorRay]

More shop vac tips: kzbin.info/www/bejne/pnrChXierrVpiLMsi=R-lF-OTAv8hZFoTx

[@Randrew]

Looks like KZbin finally decided to reward you by showing this video to people after nearly a year. Congrats! It's a worthy watch.

[@HouseDoctorRay]

Thanks. I wish knew how or why it was put into the rotation.

[@ChipChurp]

Hey man love the video just KZbin put your vid out to me for some reason

[@rickyucuis1882]

Add a paver block or 2 inside the shop vac bucket to lower the center of gravity so you don't pull the tower over when you pull on the hose.

[@durango8882]

Great idea 👊🏻

[@YerBrwnDogAteMyRabit]

That's fkn BRILLIANT! ... (HOW did I not think of that..?) Thanks!

[@alanross3435]

That's fkn BRILLIANT! ... (HOW did I not think of that..?) Thanks! ☮✌🏻

[@neepsmcfly4176]

I had good result strapping the flat weight from a standing lamp underneath the bucket, wheelbase permitting, obviously. Lots of different shapes & widths out there.

[@durango8882]

I used your method and it worked perfectly. Thanks man 👍🏻👊🏻

[@georgefitter7656]

I blow out my shop vac filter with my electric leaf blower. Been using the same filter for ten years! I clean the wife’s vacuum with the leaf blower too. Works great!

[@michaelheurkens4538]

Awww! Isn't that cute? His and hers vacuums! Take care now...

[@Slightlysalty1]

That’s a trick my dad showed me years ago. As well as “meh, forget vacuuming the car, just open the doors and use a leaf blower” I love that guy 😊

[@HouseDoctorRay]

Sounds like my kind of guy.

[@anthonyanthony7071]

Good shit man much respect

[@independentmind1977]

@@Slightlysalty1 I’ve been using the leaf blower to clean the cars, my kids and better half think I’m nuts. Glad I’m not the only one

[@AngelsDontFall]

I’m a 46 year old custom stone mason licensed contractor that’s been doing demo and flooring since I was 14 years old. Buying a better filter is very helpful. I didn’t for years. I also have severe asthma and allergies. So the most filtration that you can find is best. In flooring and sole and stone, no one uses a shop vac as much as we do. Sometimes cleaning the filter is a job every few minutes in some cases. Having two filters helps with the time but in general , most every shop vac that I’ve owned , the filter has lasted as long as the shop vac did. Now not to say the condition was the greatest and yeah probably could have been due for replacement , but when the vac needs replacing as well, . . . Well not to be too shallow, I won’t go too deep. You can buy a muffler that attaches to the outlet for around $15-20 bucks. They work great and fit perfect not to mention do what they are designed to do. Always wear protection. Always. Get a good painters mask. It’s called a respirator. 3M makes most of them on the market. I have silicosis and mesothelioma on top of my severe Asthma. It’s not fun. Protect it ! All of it ! Everything that you care about from your ears to your eyes, Arms Legs Skin. Yes skin And especially Your lungs. Even if your a smoker of anything. Still. Protect them

[@AngelsDontFall]

I’d have to agree with myself here, just so YT doesn’t delete my comment that I worked so hard on. J/k. It was easy. Agape !

[@HouseDoctorRay]

Excellent points. Thanks for taking the time to post.

[@donreid6399]

I worked for ShopVac Corporation for nearly 25 years. The profit on our vacs themselves was razor-thin. Filters, on the other hand, cost us almost nothing to make, but REALLY brought in the bucks! 🙂

[@DDooMRooMM]

You live in Williamsport?!?!?

[@donreid6399]

No, I lived in Binghamton, where the motors used to be manufactured. @@DDooMRooMM

[@Gershwin48]

Heck I would pay more if offered better. Out-design the competition!

[@cram1nblaze]

thanks for ripping us all off! love it

[@donreid6399]

@@cram1nblaze Don't worry...they all but went out of business. The owner sold the name to a Chinese company and now just put China-made vacs in boxes in a little plant in Pennsylvania so they can write 'Made in USA' on the outside.

[@justinjones9255]

I like your muffler tip; however, you must make sure that the cumulative area of holes you drill are at least equal to the diameter of the exhaust pipe. If not you will increase back pressure and decrease suction. Additionally, because of the filter material you added, I would 2x the cumulative diameter to account for the restriction caused by the filter material and maybe even go up a size in pvc pipe. Keep it up!

[@HouseDoctorRay]

Good point. I was originally going to go with 1/4" holes until I did the math on how many I would need. I decided on 1/2" holes instead.

[@jerryp1970]

Anyone know if there's an optimal size pipe ie, would a 3" pipe muffle better?

[@justinjones9255]

@@jerryp1970 No not really because the restriction is the diameter of the exhaust port on your vac. 2.5-3” should be fine but the point I made in my original comment still apply.

[@A6Legit]

@@youtubeuser5424 They're more like $13-16 but you're right. It's probably cheaper than buying the materials to DIY.

[@HouseDoctorRay]

Where's the fun in that?

[@thomasruwart1722]

For the past 40 years I have just been cleaning my shopvac filter with a water [jet] spray and let it dry for a week or so. I have a second filter to swap in while the first one is drying. I really like the pool filter sock though. Thanks!

[@935DP]

All of these are great solutions.. I am very retentive about my shop vac being very efficient due to being in the construction industry. For over 25 years I have always put about a 1/2” of standing water in the tub! This allows the dust to drop & stick to the tub, therefore keeping the filter a lot cleaner! Thanks for the additional tips to add!!

[@Lugenfabrik]

Never heard of this!

[@georgecote6481]

When cleaning drywall dust, I put in a bout 1/3 full of water, that's enough with a 15 gallon shop vac to hold it down and power drywall sand a whole home without filter cleaning.

[@PeteGeniella]

Great video! I love the pool filter sock idea. My favorite shop vac hack is to use one of those remote control outlets that are used for holiday lights etc. They have a remote control for off/on. I wear the remote on a lanyard around my neck and I can start and stop the vac as needed without having to walk over to the vac

[@316woodworks9]

I use the remote also. Came with 2. I keep one Velcrowed on my dust cart and in lives on a massive aluminum caribeaner to move around. Sometimes I just use the switch but having both options is great

[@rnrhodes2368]

Brilliant, simple.....I love it. 👍👍👍💯💯💯

[@davec2891]

Good video, I use one of those remote outlets to turn on the engine block heater on my tractor from inside my house, over 200 feet away and in a metal building.

[@jhawkins4412]

Thanks that sounds great, but I think I'm going to tape it to the house so I don't hang myself. 😂 😂 😂

[@pen25]

Using a pool filter sock is effectively reducing filter capacity. The pleats just increases the filter capacity. Using the sock reduces that. The better filter will have a higher square inch and the sock itself reduces that to a single wrap with no pleats.

[@paulpierce9055]

I like the pool filter sock Idea. I replaced my paper shop vac filter with a washable type one I bought from Bunnings (Aust). It's made by Gerni. Cost about $15. To clean it I just wash it under the tap. No dust even when I clean it. Beautiful!

[@HouseDoctorRay]

Nice!

[@Rick-Williams59]

I know this video is a couple of years old, and I've seen about every kind of vacuum cart built there is, but I really like the look and how compact it is. I have the same shop vac so this is definitely on my build list. Thanks.

[@squallywally]

I see this video is a year old and it was suggested to me why I don’t know I wasn’t looking at shop vac stuff. However, these are great suggestions. As far as the muffler goes, I found the best way to minimize noise is to have two hoses I have a 30 foot hose I use for vacuuming attached to the inlet and then I have a 16 foot that I ran out the garage door and it’s amazing how much it decreases the sound.

[@HouseDoctorRay]

We were meant for each other Wally. The same thing you mentioned applies to compressors. I've seen quite a few times people plumbing the inlet outside to reduce the noise.

[@bazenga82]

The joy he showed when he smiled after he said I need to build a cart LOL. I laughed so hard. Thank you for the tips and tricks.

[@TBoanProds]

Awesome! I just found my step-dads shop vac; its getting an upgrade!

[@larrythompson2967]

Another idea for a pre-filter, is a plain white paper towel. They work very well, just wrap a single layer around the outside of the shop vac filter and hold in place with almost anything, tape, string, elastic bands, wire etc. When it gets plugged up, no need to clean it, just undo your fasteners and drop in the bottom of the vac to throw out with the rest of the dirt, and roll out a new one. I've been useing them for years. BTW, not my idea, I saw it on youtube ages ago, unfortunately I don't remember the fellows name to give him credit.

[@HouseDoctorRay]

Well from now on I credit Larry Thompson. Thanks Larry. I think I remember that video, old barn and he walked through a door and the vacs were out back?

[@larrythompson2967]

@@HouseDoctorRay Could be, my memory is good, but very short.....

[@ghostridergale]

@@larrythompson2967 my memory great too, long as we’re talking about the present. The past isn’t near as clear as it use to be! 😂

[@farkroy]

youtube.com/@engineershomeworkshop2692 I got it from this guy and also copied his prefilter housing idea old window screen and wire. It works great, keeps everything in place, and is easy to take off. I found that viva signature cloth paper towels work the best.

[@tracyjohnson5023]

@@farkroy Those Viva paper towels are the best!

[@markdane5475]

Good job! You not only found ways to quiet and improve the shop vac but you also improved the design to make it functional. It would have been nice to see how well the dustopper worked on picking up water. It would be a complete win if you don't have to take off the filter

[@HouseDoctorRay]

I would always take off the filter when sucking up water. There will be water in the airstream and will reach the filter. Any dirt on the filter will turn into a pasty mess.

[@billhardy9697]

Best ideas for the shop vac I have seen...period!

[@HouseDoctorRay]

Thanks Bill. I really appreciate it.

[@LloydGM]

I especially love your cart. It takes up no extra space per se, gets the bucket at a convenient height for emptying, and the holes for accessories is a very nice touch!

[@HouseDoctorRay]

Thanks. It can get a little top-heavy. Some commenters have suggested putting a concrete paver in the shop vac to stop tip overs.

[@stevew.4935]

If you have a round shop vac like the Craftsman shown on your video. Look on the inside of the drum where the hose fitting comes into the drum. If the outlet of that hose fitting just comes straight in or is angled down, get a 90 degree pvc fitting of the same size and attach it to the inside of the fitting so as the air comes in it swirls around the drum the same way a cyclone does. It's a lot cheaper than the one you have that mounts on a bucket and works great.

[@wynottgivemore9274]

Yes you have given me some good ideas, I would like to say that 99% of the time I clean my shop vac outside, and with an air hose I blow out my filter and the wind takes it all away. I also use a prefilter they sell for collecting drywall cement dust for regular use they last along time if not abused, I have a wet vac especially for wet and it had one of those wet vac filters. If I had a shop I'd definitely try your combo dust collecting idea and have maybe one dedicated vas per saw or have it plumbed for all saws. I'll definitely be shopping for some pool socks though , thanks👍

[@ffas23]

I use shop vacs down in my basement,garage and barn. We actually own a few of them. I clean the filters very easily. I take them out to my Pole Barn out back and dump what I can in a garbage can. My filters have a Black Plastic Ring and a material cover that sits over the filter. You set it over the filter and push the ring down over the filter and it holds it tight over the filter. I simply start up my Air Compressor and Blow it clean with air pressure. There is no need to take it apart to even consider washing the material covering the filter the air pressure blows it so clean. Invest in a Air Compressor if you don’t have one it is a needed tool to have today. You have no idea how many vacuum cleaners I also fixed that someone would of thrown away because that air compressor came so handy to have. Air Pressure does wonders.

[@ReelWaterFishing]

This man can build anything with pvc

[@HouseDoctorRay]

Not anymore. Have you seen the prices?

[@p3kab00icu]

SuperVac! A few years ago I actually got a pool filter (on seasonal clearance) for my shop vac. It was cheaper than the correct filter. Far cheaper than the recommended wet filter. And it is an upgrade that has lasted and performed better.

[@briantotten6038]

Thanks for the tips. I recently bought the new Dewalt shop vac. It is half as loud as my shop vac, worth every penny. Like other comments, I use a hepa bag and filter. I really like your tower, and will be adding that next.

[@HouseDoctorRay]

At the grocery store I was really impressed with the Milwaukee vac. They were using it to vacuum out the potato bins and it was really quiet.

[@johnshuler8688]

I have the same 20 + year old vacuum! Picks up 16 common nails! Thank You for the tips! Excellent video.

[@HouseDoctorRay]

Unfortunately mine died. I replaced it with an orange one.

[@ShaneTheGeek]

Man, this is pure gold! I just picked up a rigid shop vac and the first thing I thought about was man that filter is going to be a PITA to get clean. Thank you sir!

[@nickrusso86]

Ridgid sells vacuum cleaner bags for their shop vacs. They work amazingly well, last a very long time, and you’ll never need to clean your filter again. The vacuum also never looses suction with the bags.

[@HouseDoctorRay]

I'll bet using the Dustopper before the bag will really help out.

[@j.stribling2565]

Wow, Ray, great ideas. I had no idea about the pool filter socks. Also, I usually slap on a pair of hearing protectors when using the shop vac. 95+ dB for an hour will result in hearing loss so your muffler build resulted in an impressive reduction. I think I’m going to do the whole Dustopper build like you showed. You took the humble shop vac to a whole new level.

[@l.medina6251]

I use ear protection. Generally, if I need to use the shop vac it's AFTER I've cut a bunch of lumber & I NEVER run a tool w/o ear protection!

[@riverraisin1]

What? Huh? Could you repeat that?☺☺

[@cindyeddings6865]

Thank you so much for this video! You've addressed all my concerns except the tip over issue but one of the comments said to put paver stones in the shop vac to stabilize it. I going to try that. This video is so helpful, thanks again.

[@HouseDoctorRay]

Thank you. Let us know if the paver works.

[@A6Legit]

I did the dual 5g bucket diy dust cyclone. I tried using a single but I think the height helps with separation. I also made a cart but regardless it's not fun to move around. My solution was buying a 20ft hose so I don't have to move the contraption around

[@kevinoneill41]

The more hose the less suction you have. Somthing to do with friction drag but I haven't noticed it with my 2" line

[@A6Legit]

@@kevinoneill41 Mines a 2.5" hose. For regular vacuuming I don't notice any difference. If you need the most suction you can get I might use a shorter hose. Hard to say if there's a noticeable difference

[@meetshield2461]

I was gonna comment something similar on the dust cyclone. I got a dewalt version of the cyclone and use it on a 5 gallon bucket connected to a central vac. Works pretty well and a lot cheaper than a full dust collection system, for anyone interested.

[@bb1040]

When I set up my small wood shop ,I set up a vacume tube thatwent all around the shop with several out lets, I set the shop vack at one end of the shop connected to that end of the tube, then plug the hose into what ever out let is closest to where I need to vacume, works great and only have to move the hose from outlet to outlet as needed.

[@jazbuilding]

Great video, thanks for taking the time. Not sure if someone covered this but for what it's worth, 10 dB is though to be about half (or twice) as loud. The dB (or deci-Bell) was developed at Bell Labs (AT&T). Since the human ear can discern sounds over an obscenely large range of energy (about a factor of a billion) they used the logarithmic scale. The Bell is very big, so they use the deci-Bell or dB, which is one tenth of a bell. For the record, every 3 dB is double the power but your ear can barely discern it. 10 dB is 10 times the power which sounds about "twice" as loud. Thanks again.

[@HouseDoctorRay]

Thanks JAZ, and thanks for watching.

[@robertopenheimer1451]

Unfortunately you are wrong. -3db is half, 10db would be 10 fold.

[@jazbuilding]

@@robertopenheimer1451 Thanks for the comment, but you didn't seem to read my point carefully or understand it. You're talking about power levels which hardly anyone cares about other than engineers. It's true -3dB is half the power and -10 dB is one tenth. To the human ear, which most people care about, 10 dB is thought to be about twice as loud, -10 dB is about half as loud. Once typically can't "hear +/- 3dB.

[@hugegamer5988]

@@robertopenheimer1451 @@jazbuilding human ears are so good they have a 10 million times difference in power between the quietest and loudest they can hear. Simply making the sound energy half hardly reduces the noise heard because the ear is so incredibly good at hearing.

[@robertopenheimer1451]

@@hugegamer5988 I am capable of easily discerning a 3db shift, if you cannot your ears are not as good as you believe. I was in charge of the lab for a major loudspeaker manufacturer. The lab included an anechoic chamber and sophisticated anechoic testing and graphing. I believe I am qualified to make my comment. Hearing is subjective, properly set up and calibrated equipment is not.

[@gdenniss]

I use a sock made from a flour bag for me by a neighbor 40 years ago. Filters for my craftsman cost $30 in Canada and has this sock has saved me hundreds over the years. Take the sock of and then blow the filter off with an air compressor and it is like new again.

[@JimPirinelli]

Thank you for all these tips! Cleaning the filter is always an outdoor job for me. It’s not convenient when there is snow and cold outside. The pool filter sock and the dustopper will be addition to my shop this week!

[@HouseDoctorRay]

Keep it clean Jim!

[@starlights50]

I put my filter in a plastic shopping bag while I shake/tap most of the dust off. then blow with the vac. Indeed usually outdoors.

[@seemeknowmore]

Great video! I always swap the power cord with a longer one. Just keep your eye out for an old house vacuum cleaner in the trash and cut the cord. Swap takes about 5 mins.

[@HouseDoctorRay]

Good idea. I often cut the cord off of old appliances or tools and save it for repairs or upgrades.

[@riverraisin1]

Yep. Vacuum cords are long and heavy duty. I always save them.

[@stevenshreckengost6462]

That is very good tips, I've been a carpenter and cabinet maker for 30 years and I'm always working and doing, but never trying too improve my situation, thank you for that, 👍.

[@HouseDoctorRay]

Thank you Steven and thanks for watching.

[@jeffreywolf5235]

I generally get the good Hepa washable filters and the trick is to keep those things as clean as possible then your Shop-Vac will run at top performance always. And don't forget to remove them if you're sucking up water

[@coloradomountainman8659]

Gave me a pretty good chuckle. You had dust suction for the drill press while drilling holes in the "muffler" and were creating large plastic non threatening chunks of plastic, but while using a circular saw on a track, fine dust was going everywhere. On another note, I had one of those wet/dry Craftsman vacuums back in 2000 and with about 10 minutes on it the motor caught fire which ignited the plastic at the top of the lid.

[@HouseDoctorRay]

In my defense that saw has no port on it so I have no easy way to hook up a vacuum.

[@1minibee]

The dust dustopper has worked really well for me. I've using it for over 2 years and highly recommend. I use a paint bucket and I also set another dustopper in a large 32g drum. In my experience, it works better then cyclone separator.

[@HouseDoctorRay]

Good to know. Thanks for posting.

[@dougreames605]

I have a project I'm working on that your system might help with can I ask u some questions regarding this

[@HouseDoctorRay]

Sure. Fire away.

[@tarwashsomeonestolemyhandle]

Great tips! I use a sock and a bag. yeah their spendy but I cut an end open, dump it and reseal the end.

[@31saint31]

My shopvac hack is the use of a pool cleaning hose to replace the short standard shopvac hose. simple modification using the standard hose ends on the pool hose. vac now sits in one spot and the 30' hose covers more area. Plus I can put the vac outside and not have to listen to the noise.

[@HouseDoctorRay]

Nice. For others, some hoses will whistle very loudly if they're not designed for vacuums.

[@Joshua-yn1zx]

Best shop Vac hacks ever. Thank you for your creativity and willingness to share!!

[@HouseDoctorRay]

Thank you.

[@jraiello]

To improve further and provide more filter surface area, use a catch bag inside of vac. Since most of the debris will be in your cyclone your vac will remain very clean and bonus is that it works better than your sock, less restriction, I basically never have to clean filter.

[@jamestate3839]

I don't understand what you're saying. How does a catchbag keep the filter clean?

[@GoggleAX]

@@jamestate3839possibly because the bag itself is also a filter.

[@1fatlenny]

I know it's an old video but a tip on the dust bucket deal as I have built my own version that works great and really reduces the amount of dust that gets to your filter. I add a garbage bag inside the bucket for easier clean up.

[@whostolemunchkin]

TL;DR: Get a disposable HEPA vacuum bag. You can reuse them by cutting open one end, then fold that edge over a few times and use a few big binder clips to secure it. Like a bag of chips. It works so much better than skimmer socks, it'll last way way longer, keeps the cartridge filter & motor ridiculously clean, makes switching between wet & dry super easy, no lungful of dust whenever you open the vacuum, and filters everything out before the air can get to the exhaust port. $20 solved basically every annoyance and health hazard with vacuuming (or rather, getting rid of the dirt and dust without it going everywhere) including drywall dust and fine particulate that most vacuums shouldn't handle. Even the annoyance of having to clean the outside of the vacuum because it gets covered in a layer of dust any time you open it. I haven't had to clean my cartridge filter at all since I switched to a HEPA bag (4+ years ago, it would need a monthly clean at minimum before then) or vacuum the vacuum itself right after I empty it. And every time I switch from dry to wet pickup. Vacuum bags are a game changer, especially when you use a HEPA filter bag as well as the HEPA cartridge filter. It's like the dirt disappears into a black hole, compared to the nightmare it is when you have to empty or clean a bagless vac. The full spiel: As a pool owner, I can promise you those skimmer socks will get a run in them just like pantyhose/knee highs. I spent a lot of time hunting down special synthetic mesh skimmer socks because the normal ones would rip within a week. (The synthetic mesh ones wouldn't work as a vacuum filter though) You can get fabric pre-filter bags for shop vacs that would do a much better job, but my double HEPA filter method makes the fabric pre-filter fairly unnecessary (see below - I was able to skip the muffler as well) I am picking up some skimmer socks for my shop vac tomorrow - but I use them over the foam filter for wet pickup. Makes rinsing the filter so much easier, rather than trying to pick out the layer of wet fur/hair/fibres from the foam filter. My solution? Go with a HEPA vacuum bag. Costs about the same as a pack of skimmer socks, lasts a hell of a lot longer, it'll stop more dust getting to the cartridge HEPA filter than a skimmer sock would,you can vac up drywall or fine particles without the dustopper, makes emptying the vacuum and switching between wet/dry pickup so much easier (and you don't end up inhaling a bunch of dust/dirt every time you open the vac canister) and they don't actually have to be disposable. When it's full, cut along one of the short edges, empty the bag, then fold that open end down a few times and secure with a few big binder clips. Seriously, that $20 HEPA bag has saved me so much time, frustration and coughing fits. I bought a pack of two well before the pandemic and the first one is still going strong! (I use the type H, yellow colour disposable hepa bags - there is a tougher tear resistant one, which I would probably buy next time, but mostly to compare with the yellow ones) I have vacuumed up broken glass, drywall, tiny bits of gravel, staples, needles, dry chlorine, baking soda, clay soil, bark... The list goes on. I am still surprised by how well it has held up, and am still a bit annoyed that I put up with the supposedly superior bagless vacuums for so long. The HEPA bag does a good enough job with drywall, chemicals and anything else that requires a P2/N95 mask. I can't compare it to a muffler, but I feel safer with two layers of HEPA filters and it's also way better on the motor and cartridge filter long term, as they stay pretty damn clean and there's no air restriction from the muffler or from the cartridge filter getting clogged up. I haven't tried a dustopper, just because I don't need the dust extraction functionality, and I'm more concerned with the very fine particles that a HEPA filter will catch. Dry chlorine powder is my benchmark for filtration - I had a commercial canister vacuum with a micron fabric filter, someone spilled a bit of chlorine and grabbed the vacuum instead of the broom. It picked up the chlorine granules, but the micron filter fabric couldn't stop the very fine particles from going straight through it, into the motor, and back out in the air. And the vacuum motor smelt like chlorine for months every time it ran after being coated in that very fine chlorine dust - which ended up being one of the reasons I bought the shop vac. HEPA filter handled chlorine just fine - I wouldn't have even tried it without the HEPA bag as well as the canister filter, because of that exhaust port. And as a side benefit, with 2 layers of HEPA filtration my shop vac could technically work as an air purifier. Just a very loud one. Works alright if you just want to turbo charge an air change, like when your kitchen exhaust fan would take ages to clear out a bit of smoke (btw, I have extremely bad allergies and I'm hypersensitive to chlorine - hence the minor obsession on the very fine particles and max filtration efficiency. When you get an instant migraine for the rest of the day because someone vacuumed briefly - you'll go to some lengths. Upside is the shop vac with all its filters is still the cheapest vacuum I've owned, and it beats the rest of them by far)

[@HouseDoctorRay]

Wow! Thank you for the thorough response and information.

[@Petter1980]

Very interesting. It would be great if you made a video explaining the details of how your setup works. I would love to see it.

[@dorothygriffin5898]

]

[@madmax8620]

Thanks captain assberger

[@bread-gz3rl]

Only problem is that this craftsman can't take bags lmao

[@mdaley3102]

That’s the best set up I’ve seen yet without having to go to an expensive system. Thanks for sharing

[@HouseDoctorRay]

Thanks Michael. Glad you liked it.

[@rowdydog]

Why have I not came across your channel, until today? Great tips, that actually work. Thank you so much.

[@HouseDoctorRay]

Thanks RD and thanks for watching

[@Skyborn-]

As a stone Mason I have to deal with very fine dust. Your ideas are sound. Thank you.

[@HouseDoctorRay]

I hope you wear a good mask even outside.

[@frankpatellaro3163]

I’m pretty meticulous with my pleated filters. I actually vacuum my pleated filter using a second bagged wet/dry vacuum. I find this the only way to really clean the pleated filter. You did a really great job constructing the dustopper cart!

[@HouseDoctorRay]

Thank you.

[@cheeseheadfiddle]

Air compressor makes a filter like new.

[@joedaley1878]

I like the dustopper build for it's ergonomic height.

[@tonyluzbetak9934]

What's cool about vacuum systems is it doesn't matter how large of a volume you have for the internals of the vacuum system like the addition of extra hoses and that bucket and all that won't decrease your suction so long as it's not restrictive. I took a tiny like 2 gal shop vac and made a central vac system in my work truck so I have a remote turns it on and have 4 different ports I can connect to. The dust bucket is a good idea I might add that in.

[@HouseDoctorRay]

They really do work well. Can't recommend them enough.

[@A6Legit]

In general it seems like larger capacity vacs have higher HP motors. Definitely do the dust bucket or DIY one. It's easier to empty debris from, however the filter will still get clogged with all the fine particles. It just keeps the bulk of it out of the vacuum so you don't have to mess with bags or try dumping the vac with all the accessories attached to it.

[@manuelferreira1363]

Subscribed. Retired tractor trailer owner operator here who just got a new shop vac. Enjoyed your instruction.

[@HouseDoctorRay]

Thank you and thanks for the subscription.

[@kennethbloom3584]

WOW very impressive. I bought a used Craftsman and even without the filter installed it didn't have any sucking though the motor sounded robust but straining. I removed the motor from the top housing and found a thin micro filter presumably to stop dust from going out the exhaust. Anyway once I cleaned that thin filter I had a relatively perfect suction. Also the pool sock is a great idea, I used womens nylon back when they were a thing. Seemed there was no shortage of them since they were easily snagged. Great video, looking forward to more.

[@HouseDoctorRay]

Thanks Kenneth.

[@pjmtry7]

Adding the pool filter is key, thank you!

[@Burnsiealex]

The dust collector you are using is acting more as a chip separator, actually, that’s exactly what it is. I built them using a 20 gallon bucket and pvc fittings. Works great!

[@michaelbaykara2322]

the last idea with the cart was very clever, looking forward to more.

[@GlennC789]

Good video. My noise hack is having bought a set of those noise-canceling earbuds. They're so effective I can listen to a podcast or music comfortably even at low volume while running a shop vac, household vacuum cleaner or any other noisy tool. Some of the best money I've ever spent. Edit: Decibels are logarithmic, that is correct, but so are our ears. So while a 10dB increase in sound is actually ten times the sound energy, we generally perceive it as roughly double the volume. Twenty decibels would be 100x sound energy and four times the subjective volume level; thirty decibels 1000x and eight times, and so on.

[@goodtobehandy]

One more thing you can add. Is a remote outlet. It saves the vac switch and it's so convenient to turn the on and off from anywhere, within range. When I was doing bathroom remodels. The space was usually too cramped. So i put the vac outside of the room and had just the hose to deal with. So the remote was a great solution.

[@HouseDoctorRay]

Excellent tip. I have one of those outlet adapters on mine now for when I'm working on the table saw or router table.

[@hoobeydoobey1267]

Great stuff! DBs are logarithmic. Every 3db is a doubling or halving. The 97 to 87 decrease means you halved and then halved it again, plus reduced it further.

[@HouseDoctorRay]

Thanks. I didn't know decibelologists watched @HouseDoctorRay.

[@pen25]

Of power required not actual sound. Meaning it takes twice as much power to make 3db increase or reducing power by half. This redirected the sound and honestly isn't much reduction. Still harmful to hearing without hearing protection. So say you have 100 watt amp and your stereo makes 91 db. You would need 200 to increase volume to 94. 400 to reach 97 db 800 to reach 100. In this case it has nothing to do with reduction in sound. This just changed pitch most of the noise is coming from the motor itself.

[@sandersjones1577]

I use the Vaccum bags they work good for me. This only a suggestion,Thanks for sharing

[@HouseDoctorRay]

I gotta try these bags everyone is mentioning.

[@SoirNoirKat]

For those with smaller shop vac setups, who want that cyclone separator action (like the dustopper; it is just one of many available cyclone separator designs on the market).. but with a MUCH smaller footprint. There exist in-line cyclone separators. I got one by Cen-Tec called the Turbo Duster. You put it in line with the vacuum hose; personally I chose to put it at the end of my flexible hose right before I put the hose pipes and whatever attachments. I have a 1 and 1/4" size shop vac hose, which is the smaller size and often the same size as standard household vacuum hoses (meaning can use most household vacuum attachments on the shop vac hose) +I can use the Turbo Duster with the included adapter for my shop vac, but if you have a larger size hose you may need to check specs and/or get an adapter. The Turbo Duster is small, which is both the advantage AND potentially a con; it will cyclone separate but only holds a plastic cup's worth of whatever you're vacuuming. I personally prefer it because we're low on space, +if I need to vacuum a lot the cup is quite easy to empty (twist on/off). But if you're doing a lot of volume with sawdust etc. it will probably irritate you how small it is so for that better to use the larger options. Just figured would mention since I think there are probably some other people like me, who want the flexibility of a shop wet/dry vac with cyclone separation, but who have very little space available; where a 5 gallon bucket sized system in addition to the vacuum size itself is too large or bulky to be workable.

[@Mavrik9000]

Do you mean the Cen-Tec Systems 58577 Turbo Duster that says "Turbo Dust Filter" on the box?

[@timothybradek3560]

Very good.. very good indeed. Straight-forward, well laidout, explained, shown and demonstrated... not to mention inventive! Thks Doc...

[@HouseDoctorRay]

Thank you Timothy

[@murdo_mck]

The sock is a great addition. When the dustvac filter gets clogged with fine particles it can be cleaned - just go over the outside with another vacuum cleaner and a small nozzle.

[@HouseDoctorRay]

Good idea.

[@TheRanxerox]

Or throw it in the laundry?

[@penalty5992]

It's just shopvacs all the way down, a pyramid scheme

[@breeze787]

I almost clicked "NEXT!" and its a good thing I didn't. Cuz you had some pretty good ideas there that I can use. The Pool Sock was a winner and that's all I thought you had. When you talked about adding that dust collector I almost clicked "NEXT" and its a good thing I didn't. Because your modification and the way you designed the collector to go over the top was surprisingly cool. So I've been for about a year now had thoughts of building a Thien-baffle cyclonic separator on my Craftsman 16gal shop vac. And your modification almost killed it but now I will build the Thien-Baffle cyclonic separator on my Craftsman and still build your modification to raise the tool storage at a height that negates having to bend over. Soooooooo Thanks for putting this up!

[@HouseDoctorRay]

Thanks. I added a Thien Baffle to my Harbor Freight dust collector and it works great. kzbin.info/www/bejne/pJnSl4ZpjK-sors

[@RobertLBarnard]

Good stuff! I like that you tested the dust collector on sawdust to see how effective it is, and how you solved the unwieldiness of it with a simple "up" grade 😂. The pool socks are gold, such a great idea! I'm finding some today!! Here's my tip: I use a wireless remote switch to control the vacuum. I keep the little remote (size of a FOB) near the inlet of the hose so I can turn it on like a flashlight. Which works well for cleaning chips off the lathe and milling machines. Regarding sound: You're right about decibels, they are logarithmic. It works out that for every 3 dBa, power is doubled. So 87 dBa is 1/2 the energy of 90, and 93 dBa is 4X the energy level of 87. Here's some levels to consider. 10 dBa - a pin dropping 30 dBa - whisper 60 dBa - conversation 85 dBa - snowblower, diesel truck passing (also damage hearing after 8 hrs) 90 dBa - squeeze toy, mower 105 dBa - table saw 140 dBa - jet engine at takeoff (eardrum rupture) 180 dBa - rocket launch 194 dBa - shock wave threshold, when "sound" can liquefy soft tissue

[@HouseDoctorRay]

Good info. Thanks for sharing.

[@christopherjohnson1414]

i listen to my music at 400dBa , its soothing

[@teatonaz]

“ Liquefy soft tissue “. Whoa,… I got a bad visual on that one. Whew. Great vid. Sub’ed.

[@HouseDoctorRay]

Thank you so much.

[@porkchop3094]

Great ideas, especially with the pvc extensions.

[@wallacegrommet9343]

Spray the entire vacuum with a good protectant like 303 or no low sheen armor all. Inside and out, even inside the hoses and pipes. Obviously, start with a very clean vac! The layer of protectant keeps static electricity from building up, so dust sheds easily. Cleanup is so much easier.

[@HouseDoctorRay]

Is this wizardry you speak of true Wallace? I've never heard this before but it sounds like it would work.

[@wallacegrommet9343]

Works quite well, and its cheap, too. A little of these protectant products goes a long way. In some cases, I have observed treated plastic surfaces repelling adhesive pads a year later. Which isn’t exactly what I wanted, but it illustrates how long lasting the protection is. But everything has to be clean prior to treatment. I worked in fire damage cleanup, and our machinery would be covered with smoke and ash at conclusion of project, which took a while to clean, and even then contamination remained. After treatment with a protectant, almost no dirt, smoke, or soot would adhere.

[@bluesideup007]

Very nice solution to the Dustopper mount.

[@HouseDoctorRay]

Thank you.

[@hugegamer5988]

I like how models show HP ratings of 5 and 6 when in America the plug has 120V @ 15A max meaning 1800 watts max or 2.4 HP And that’s at a 100% efficiency. To get 5+ you need 200% efficiency, with a couple of vacuums hooked together you could have perpetual motion.

[@HouseDoctorRay]

Reminds me of the small engine lawsuit years ago. Now lawn and garden equipment is sold by CCs and not HP.

[@hugegamer5988]

@@HouseDoctorRay we used to joke that small gas engines were rated in Hamster Power.

[@Bcuzimtan]

Just bought a place with a decent garage, love your content appreciate the ingenuity.

[@HouseDoctorRay]

Thanks for the kind words.

[@frameriteairdrie578]

To clean my filter, I take it outside and toss it around the lawn a few times. Makes it really clean.

[@Z1082]

I thought that was just me...

[@sparky6565]

I am going to try the pool filter idea. Thanks for the hack.

[@DivineMisterAdVentures]

That cyclone results is great. But it tells me that the underlying design of the vacuum needs to change to a dual chamber design - perhaps one for dry and one for wet?

[@mikecleek3964]

I’m glad you posted this I’m fixing both of my shop vacs thanks for sharing

[@erictjones]

Great video. I am surprised you did not mention a filter bag in the wet dry vac. Keeps your filter clean, makes dumping cleaner and you can almost completely fill your vac. Yes they cost but they are reasonable.

[@A6Legit]

With the cyclone collector you don't really need it. It's not worth the cost to me at $10 a bag (Ridgid). If you only use your vac occasionally it might be worth it, but wood working can fill a 5g bucket pretty quick

[@erictjones]

@@A6Legit Agreed! The cyclone is a game changer. They used to only make them for 55 gallon drums. I mainly use bags for drywall dust because it was a shop vac killer. Great stuff!

[@A6Legit]

@@erictjones Fair point, it depends what youre vacuuming

[@wolverine1694]

You and me are a lot alike brother...our type just can't leave things stock... I did something very similar... keep on and God bless

[@tippo5341]

The difference of an inline filter like the dust stopper, or a cyclonic centrifugal filter makes a HUGE change to what actually gets through to the shopvac...certainly made a difference catching a lot of the finer dusts that clog up the vac filter so quickly. Great video by the way...loved the pool filter sock hack...will certainly be adding that to mine. Cheers from Sydney Aus!!!!

[@HouseDoctorRay]

Yes, Dustopper or even a homemade separator goes a long way in keeping the filter clean.

[@MAJorgy70]

Nice ideas. I just use the Shop Vac vacuum bags.

[@RalphSampson...]

Cool idea for the two stage vacuum. Thanks! EDIT: As far as the muffler goes, you can buy one cheaper that is much smaller and I think it works as well the one you built. The sock is a cool idea but, they sell a package of paper socks that go over the filter.

[@HouseDoctorRay]

Thanks Ralph. Do they sell those paper socks in the store or is it online only?

[@gerrylopez5743]

Great ideas. Thanks for sharing.

[@riverraisin1]

@@HouseDoctorRay I've bought cloth socks specifically made for shop vacs online. But it's been a few years since and I don't remember which site they were on. Most likely ebay.

[@chrispoletti8863]

The hammer one the bucket to make the whole gave me a real “this old Tony vibe” love it!

[@HouseDoctorRay]

That's a great compliment. Thank you.

[@ChadBray3]

I was impressed at how carefully you drilled the holes in the muffler. I would have just held the pipe with my foot and gone to town drilling a bunch of random holes! Lol.

[@LilDirt12]

Awesome!!! My boyfriend loves souping up everything. This will stoak him out. Thanks for sharing.

[@bgt7874]

I started the build, but got stuck on making the hole for the bucket in the mdf. Already destroyed two hd buckets using diffrent sizes hammers.

[@HouseDoctorRay]

You have to practice. You need the harmonic frequency just right.

[@knot4man]

HD buckets are inferior. Get one from motor oil or hydraulic oil, or paint. Darker colors resist UV light better than ones from restaurant dishwashing or sanitizer solutions. I call it " ultraviolent radiation." Keep all plastics away from it as much as possible .

[@thomasnichols9839]

This is the coolest ever hacks for a shop vac I have watched. Oddly enough I only need a pool filter and a dust topper. I have everything else. Thank you.

[@HouseDoctorRay]

Thanks Thomas.

[@ardent963]

That's pretty slick. Think I may have to build something similar. Thanks for the tips!

[@HouseDoctorRay]

Thanks Brad.

[@aliengranpa]

I used one of my covid era neck gaiters as a filter cover. Works great, I just pull it off, hose it down and toss it in the wash

[@Burn_pits]

A two minute KZbin video on how to make baffles will help with mufflers. I did just about everything you did when it came to constructing mine, but I went ahead and inserted a core with baffles/chambers to reduce the sound profile. I think a lot of people get sucked into the decibel rating instead of directing the sound i.e. air

[@HouseDoctorRay]

You're right but it kind of made it look all scientificky.

[@gking1767]

Great simple solutions to fix those issues, thanks

[@trleith]

The Dustopper is great especially for stationary use. The cart's a great hack for portable. The muffler won't catch the most damaging dust. You can get paper bag filters for many wet/dry vacs and a genuine 0.3 micron high efficiency for the exhaust air. The paper filter protects the expensive high efficiency filter and protects you -- just throw the full bag in the dumpster without having to kick up any dust. A Dustopper could protect the paper bag, especially with bulky, basically non-toxic stuff like wood. The bags would "never" fill up. If you're working with lead paint dust or silica dust at your own house and not subject to federal regulation, you can duct tape the lid on the vac, along with the bag and high efficiency filter. My calibrated eyeballs don't see anything at all floating in the air, but maybe you want an N-95 as well. When I can, I throw an exhaust hose out a window. Might be able to tape the Dustopper too (don't know, don't have one). DeWalt makes a dust collection kit for their circle saws that kinda clamps over the dust port on the blade guard. You put your vac hose on it. You can probably get them for other saws. I don't have one. There are kits for people who saw cement board and do tuckpointing that usually enshroud most of the business end of the tool. Well done. Stay safe.

[@HouseDoctorRay]

Thanks for the thoughtful comments. I'll look into it.

[@sherrie9241]

I am always amazed what a Man can invent when left alone in a shop. LOL, This is a great idea.

[@HouseDoctorRay]

Thank you

[@Christian-cw9mp]

I give it a 99! I would give it 100, but you didn't paint the orange bucket red to match the shopvac! Haha. Great job! You are very innovative!

[@HouseDoctorRay]

Thanks. Since I made the video my vac finally died. I bought an orange one to match the bucket.

[@TheRosstaman]

I'm currently in the "how can I make my dust collection work better" phase. Going to implement all of these Ideas. Thanks for the inspiration. EDIT: I bought the dustopper about 3 weeks ago and can attest that pulling it and the shop-vac around the garage is difficult... at best. And I'm adding a Hepa filter and hepa bags to the scum sock idea, as well as your exhaust filter, in an attempt to get as many particles out of the air as possible.

[@HouseDoctorRay]

Post back how the bag works out. I bought one but it's still in the box.

[@richardspeidel]

Please share how you cut such a perfect circle in the MDF! Also, I see it's a standard HD bucket, what is the diameter of that circle?

[@HouseDoctorRay]

I used a jigsaw. It's 11 ¼". No need to struggle measuring something like that. I put a framing square against it then my combination square on the other side. The framing square said 11 ¼".

[@brucedana45]

@@HouseDoctorRay m

[@TheOneAboveAll-001]

Mannnnn I been needing those tips! I just threw out my Shop-Vac because they don't make the filter anymore, so now I'm looking for one that will last me more than two years.

[@HouseDoctorRay]

You must really abuse them, they usually last a long time. Although I will say my new Ridgid isn't built as well as my Craftsman that just died.

[@ghostridergale]

Great idea, I like doing thinks like this too. Did something similar with a propane infrared heater that normally mounts on a wall. I made a cart with a wood wall in the center of the cart to mount the heater to and a propane tank sits on the other side of the wooden wall. Now it’s a portable heater I can easily move around most anywhere. Use it in the house when needed and out in the garage when I’m working when it’s cold. Those empire infrared heaters are great BTW, mine over 20 years old and has never failed to work and the one I have has 5 ceramic panels that really throws out a heck of a lot of heat! 99% efficiency rating and many safety sensors to keep you safe!

[@HouseDoctorRay]

Now all the do gooders are going to flame you for running propane inside. Meanwhile half the houses in my development have propane furnaces.

[@otpyrcralphpierre1742]

@@HouseDoctorRay Propane house furnaces exhaust outside, the infrared ones do not.(that I know of)

[@banditnip0345]

This guy's a genius. Black & Decker, watch out! He perfects vacs.

[@HouseDoctorRay]

Thanks Bandit

[@percyfaith11]

I think that the pool filter sock is going to reduce the filter surface area by a large amount. There's a reason that the filter is pleated and that is to increase the surface area of the filter. If that sock decreases the surface area by a factor of 5 or 10 you will have to stop working and clean it 5 or 10 times as often.

[@HouseDoctorRay]

The filter sock just makes it easier to do a quick clean. Bang the Vac a little and most of it falls down.

[@williambeasley3521]

I have been using the vacuum bags for the shop vac for the last 10 to 15 years and I have used the same filter for the same time.

[@larryborshard7824]

Great video, thanks! I found heftier shop vac filter socks at Walmart and Home Depot for around $6-7 each, and found pool skimmer socks on-line for around $4 for 30 (much thinner material). Looking forward to trying them out and saving time, effort, and dust clouds when brushing and air-blowing out the 100 flaps on the shop-vac filter. Thanks again!

[@dennisgeroux4483]

I also have the 15 year old Craftsman 16 gallon shop vac. At work we adapted a 55 gallon metal drum for a reservoir for the vacuum. We mounted the the suction and exhaust on the top and hooked the exhaust to the vacuum it worked great for a large storage of water when vacuuming. Put the drum on a cart or we used a forklift and a pallet. One time one of the maintenance guys tried to draw the water up 15 feet out of a tank and after a minute or two it caved in the 55 gal. drum like it was tinfoil. Vacuum has a lot of power when dead headed.