Thanks for sharing this excellent instructional video on fixing a common fault in these transmissions. I have a Captiva that's just recently started flaring when shifting from 3rd to 4th and think, after watching this video, that replacing the solenoids should fix the problem. I bought the vehicle knowing it had a faulty transmission. It found it had a broken wavy ring and damaged the 4-5-6 gear drum. The filter was full of aluminium particles. I electrically tested and cleaned the solenoids at the time, but suspect they might have been damaged by all the aluminium particles being pumped through them. A pressure test probably would have shown they were not in top condition.
@YepThatsIt9 ай бұрын
good work, thanks & cheers
@pirateshipping817 Жыл бұрын
Excellent video covers all the bases !
@YepThatsIt Жыл бұрын
thanks & cheers
@olamabambi4193 Жыл бұрын
Looks like a successful fix good work guys.👏
@YepThatsIt Жыл бұрын
thanks and cheers
@CesarReyes-r7r9 ай бұрын
Hello!, I loved your video!, I have a buick verano 2015 that is not changing to 6th gear and is showing the same error, my question is if I change the solenoids do I need to reprogram the transmission somehow?, or I can change them without an issue and connect everything again hoping it to work?
@YepThatsIt9 ай бұрын
hi, usually wont need to reprogram, worth a try. cheers
@tranthien61822 ай бұрын
I'm got P0796: PCS 3 (L/R 4-5-6) stuck Off, but slipping in only 5-6 gear only. Is there a possibility of a fault in the solenoid or 5/6 clutch?
@hebertjazz3219 ай бұрын
Great video thank you🙏 question, I have a 2015 chevrolet impala 2lz. It wont shift to 4.5 or 6 gears. All the other gears are ok. Do you think that if i do a flush and add new fluid could aolve the problem? Any ideas? Thank you so much
@YepThatsIt9 ай бұрын
hi, flush wont do diddly! you need to check solenoids and seals in the tcm assembly, the solenoids get contaminated or the plastic manifold breaks from pulsating pressure over long time, or the seals flatten out and you get pressure leaks. make sure you see our other vids on 6t40 or mechatronic vids to see what i mean. cheers
@thetmyers388110 күн бұрын
how long did it actually take to make this repair?
@CesarReyes-sr8mw9 ай бұрын
Hello!, I loved your video, I changed the solenoids yesterday, but now the transmission doesn't want to drive nor do reverse, do you know which might be the problem?
@YepThatsIt9 ай бұрын
hi, did you change with new solenoids or ebay ones ? cheers
@CesarReyes-sr8mw9 ай бұрын
Hello!, I bought them in amazon, but they came in a ziplock bag instead of a new package
@reptile_racing8 ай бұрын
Hello, Mr.! I believe that sonnax solenoid chart, at 1-2-3-4 solenoid, are with on/off inverted. I mean, in according with the original service manual. Btw, great video! Cheers from Brasil.
@YepThatsIt8 ай бұрын
hi, we`ve never had consistent luck in doing the in car solenoid cleaning with scantool. as explained in video, the debris and flattened seals are often the main issue. cheers
@mattmorison96 Жыл бұрын
Hey mate, can you let me know the gasket/o ring part numbers or where to get them? I couldn't see any links in your description to follow for these parts. Cheers
@YepThatsIt Жыл бұрын
hi, if you`re in australia you can purchase from us, our contact link is in descrition. cheers
@karlknudson1264 Жыл бұрын
hay mate firstly great vids thanks a bunch ! i have a ford focus 2012 lw td and i wont to but a scan tool fix the gear box as you did in your focus vid and clear codes ect . thanks in advance
@YepThatsIt Жыл бұрын
hi, clearing codes does not fix the problem. the same codes will return once the fault parameters are met. you need to fix the cause, then clear codes. cheers
@josephhalwagy6435 Жыл бұрын
thank you for sharing
@YepThatsIt Жыл бұрын
no worries, cheers
@erosas887 Жыл бұрын
I have a territory 6r80 with hard shifts from first to second sometimes and I would like to take it to your shop but couldn't find any info on youtube. You should add your contact info on KZbin, so people can reach you out directly. Cheers
@YepThatsIt Жыл бұрын
hi, you can contact us via facebook link in description. cheers
@gigimarfa877 Жыл бұрын
I have no forward movement on my gearbox only reverse. If I manually shift into 2nd and 3rd i can feel a slightly bump in the seat and very little engine rev but I can't move forward. Reverse works perfectly. Can this job fix the issue ? or should i get an gearbox to replace mine ?
@YepThatsIt Жыл бұрын
hi, start with basic checks/tests. sorry hard to determine without more info. cheers
@gigimarfa877 Жыл бұрын
@@YepThatsIt I have bought an 6T30 trans from spares and I'm wondering that if it can replace mine which is 6T40. The trans overall looks the same and the connector on the TEHCM is the same. Thanks
@dkconnect262610 ай бұрын
I have the same issue with code p07bf when it's warm no drive at all only reverse, I replaced output and input speed sensor didn't fix it, any idea with this code p07bf. Thanks
@gigimarfa87710 ай бұрын
@@dkconnect2626 try and replace 1234 gear solenoid and clean/inspect the valve body, that fixed my issue.
@ranmen1935 Жыл бұрын
Can you share where you ordered the solenoids from and who is the maker?
@YepThatsIt Жыл бұрын
hi, if you`re in australia you can purchase from us. link is in description. cheers
@StansAuto8311 ай бұрын
Hay mate what that website you used. Coming from over the ocean USA.
@YepThatsIt11 ай бұрын
hi, sonnax.com
@Rigo-ki8sy9 ай бұрын
Hello by any chance can u tell which is solenoid c..???
@YepThatsIt9 ай бұрын
hi, for further help, please also read through past comments and responses and check out our other related vids. cheers
@Shotgunwilli19658 ай бұрын
Where do I order the solenoids and filter ?
@YepThatsIt8 ай бұрын
hi, if you`re in australia you can order from us. link is in description. cheers
@peterbrady216511 ай бұрын
what speed does the convertor clutch come on?
@YepThatsIt11 ай бұрын
hi, if you mean fully on it will be under higher speed. at lower speeds will depend on load or deceleration, but not in 1st or rev i believe. cheers