How a Ingram MAC-10 Works | World Of Guns | Operation and Field Strip

Showing how a MAC-10 operates and field strips in World Of Guns on STEAM.
Wikipedia: The Military Armament Corporation Model 10, officially abbreviated as "M10" or "M-10", and more commonly known as the MAC-10, is a compact, blowback operated machine pistol/submachine gun that was developed by Gordon B. Ingram in 1964. It is chambered in either .45 ACP or 9mm. A two-stage suppressor by Sionics was designed for the MAC-10, which not only abates the noise created, but makes it easier to control on full automatic (although it also makes the gun far less compact and concealable). For a decade, the semi-automatic pistol version of the weapon was forbidden in the U.S. under the assault weapons ban enacted by Congress in 1994.
The term "MAC-10" is commonly used in unofficial parlance.[citation needed] Military Armament Corporation never used the nomenclature MAC-10 on any of its catalogs or sales literature, but because "MAC-10" became so frequently used by Title II dealers, gun writers, and collectors, it is used more frequently than "M10" to identify the gun.
The M10 is built predominantly from steel stampings. A notched cocking handle protrudes from the top of the receiver, and turns the handle 90°, locks the bolt, and acts as an indicator the weapon is unable to fire. The M10 has a telescoping bolt, which wraps around the rear face of the barrel. This allows a more compact weapon and balances the weight of the weapon over the pistol grip, where the magazine is located. The M10 fires from an open bolt, and the light weight of the bolt results in a rapid rate of fire. In addition, this design incorporates a built in feed ramp as part of the trigger guard (a new concept at the time) and, to save on cost, the magazine was recycled from the M3 Grease Gun. The barrel is threaded to accept a suppressor, which works by reducing the discharge's sound without attempting to reduce the speed of the bullet. This works well with the .45 ACP versions, as most loads are subsonic already, as opposed to special, low-powered subsonic loads usually required for suppressed 9mm weapons. At the suggestion of the United States Army, the suppressor also acts as a foregrip to inhibit muzzle rise when fired. Ingram added a small bracket with a small strap beneath the muzzle to aid in controlling recoil during fully automatic fire. The original rate of fire for the M10 in .45 ACP is approximately 1090 rounds per minute. That of the 9mm is approximately 1250, and that of the smaller MAC-11 in .380 ACP is 1500 rounds per minute.[6]
Noting the weapon's poor precision, in the 1970s, International Association of Police Chiefs weapons researcher David Steele described the MAC series as "fit only for combat in a phone booth".[7]
While the original M10 was available chambered for either .45 ACP or 9mm, the M10 is part of a series of machine pistols, the others being the MAC-11/ M-11A1, which is a scaled-down version of the M10 chambered in .380 ACP (9×17mm); and the M-11/9, which is a modified version of the M-11 with a longer receiver chambered in 9×19mm, later made by SWD (Sylvia and Wayne Daniel), Leinad and Vulcan Armament. Law enforcement bureaucracies such as the Minnesota Bureau of Criminal Apprehension (BCA) consider MAC-11 variants such as the Leinad PM-11 to be part of the "MAC-10 class pistol."[9]
In the United States, machine guns are National Firearms Act items. As the Military Armament Corporation was in bankruptcy, a large number of incomplete sheet metal frame flats were given serial numbers and then bought by a new company, RPB Industries. Some of the previously completed guns, which were already stamped with MAC, were then stamped with RPB on the reverse side, making it a "double stamp" gun.
RPB Industries made many open-bolt semi-automatic and sub-machine guns before the Bureau of Alcohol Tobacco Firearms and Explosives (BATFE) seized roughly 200 open-bolt semi-autos during the drug wars of 1981. The BATFE insisted that all future semi-automatic firearms were to be manufactured with a closed-bolt design as the open-bolt semi-automatics were considered too easy to illegally convert to full automatic operation.[8]

[@harukaa69]

Giant MAC-10 in the middle of the universe

[@badgalcrazii187]

🤣🤣🤣🤣🤣

[@jonpaul3868]

Gun nute wet dream.

[@Momazosdiego3467]

A ok es verdad wey la Mac 10 es lo máximo ma con el ñoño del chavo del ocho xD

[@owlstep887]

Lmao

[@Karim_Shaiakhmetov]

Meta codm

[@philadell8776]

Really cool modeling and demonstration. I'm new to the Mac-10, and had some questions on how some of the mechanism worked, but this cleared it up completely. Well done!!

[@bunk95]

Upside down the receiver.

[@frost8077]

I wanted a MAC-10 for a long time. It's funny now to see how simple and crude it really is, but I still like it for that, even if it's a little dated compared to modern guns.

[@Cuymresearcher]

Fr dude like mac 10 could be under 20 parts if u just need it to operate like without the safety and the whole stock

[@jorgf288]

search mac 10 profesor parabellum on google

[@coreyhead5777]

This gun was invented in Powder Springs, Ga. manufactured in Kenesaw. My home town is sandwiched between the two.

[@chonconnor6144]

Simply genius design.

[@patricktmt4312]

Démonstration par l'animation en images de synthèse est vraiment au top ; de façon théorique bien-sûr.

[@americangangster1911]

Je suis d'accord, merci pour le commentaire

[@user-oy9zy4ds9m]

I’m holding one while watching this video. Yes a real one except mines made in Marietta Georgia , the one depicted here is a 3rd Gen which was made in stephenville Texas. There’s really very little difference between them it’s really because the company changed hands a lot throughout the years.

[@waffenfreund]

Nice Details, i think it should be enough to rebuild it. For a school project

[@a-listercrowley2737]

Don't shoot it at sku tho They get all mad

[@waffenfreund]

@@a-listercrowley2737 relax, dude. We just wanna protect our school - in case of a zombie apocalypse, we're not crazy man

[@a-listercrowley2737]

@@waffenfreund oh ok I hate zombies too Shoot the sku all up then 😆

[@jakcummins9996]

Too soon 😂

[@arinaZamorochka]

Why does the free shutter spring in the video not change its shape in any way? The spring must compress and expand.

[@АлександрПропусков]

Is there way to download model of MAC 10 with all that details?

[@niyolyindustrialsrlVenturaPaul]

Nice

[@matthewdecoursey6524]

love the black ops cold war sample that was a great cod

[@maxpayne7030]

OG'z remember Ingram from Max Payne😍

[@Wes-u7y]

The Knight Rider episode Hearts Of Stonr had one with a longer barrel, top mounted grip and grenade launcher

[@mikeyz8775]

I need an open bolt cad file. They remove the open bolt design and i think its now built with a closed bolt and fireing pin.

[@MrHalukbilgin]

I understand this is from a game, but do you have a link for the downloadable parts and model?

[@rbmgunsmith6003]

I love mac gun

[@tyronehuggins5065]

What about m-11

[@sidpap241]

Passa todas as medidas das peças , desenho completo

[@JoseGonzalas]

What program is this? That is absolutely fascinating.

[@americangangster1911]

It's called world of guns, you can get it on steam and smart phone.

[@joelbonilla4579]

@@americangangster1911 k

[@nomcarver4436]

Is this a app I can get or is it something the guy modeled?

[@karpanomuuuuu]

world of guns on playstore/steam, idk about appstore

[@eatingdisorder6473]

smart gun

[@lancerevox6880]

Very simple

[@mrwhosmynameagain]

Man what game is this background music from I know I've played it whatever it is a ton I just can't figure it out its driving me crazy I gotta find out

[@americangangster1911]

Black Ops Cold War

[@SpecialOperator]

@@americangangster1911 What about the second song?

[@UFCBRUTAL]

Top pow valeu mais um escrito

[@hernan4094]

Good machine 🙀🙀🙀🙀🙀🙀

[@454FatJack]

Highlander took whole mag. No effect

[@salvisalvi9745]

send me the 3d design please

[@VladimirNastri]

6 mil na mini uzi dinheiro a vista

[@gifthorse3675]

I’m pissed that these are $16k now days

[@giannilavezzi7026]

Brave gunsmisthth

[@sr-xl3zn]

Wow bagus bagus banget ,pengen aku

[@davonpaul45]

👍

[@1visitante]

No cs 1.6 essa arma mata da lua, no recoil.

[@imhigh0013]

Mac-10.... in 10mm... just thinkin.. 🤔

[@MichaelUSA898]

MAC10 SMG

[@tobeymalaugh7826]

BABE IM PREG-

[@jovancecajlev1418]

👍👍👍👍👍☠☠

[@-yl6fo8bd7p]

The machine MAK 10 is very simple in design, but reliable.

[@jesusvera7941]

so this is how apple laptops work? im confused out of the bad joke i think i have a new favorite smg. with all the accessories attached this is a very cool weapon.

[@mrwhosmynameagain]

You'd never heard of a Mac 10? It's a badass gun. It and the Mini-Uzi share some of the highest, if not the highest rounds per minute of all SMGs

[@SimpleGuy795]

i dont see firing pin hitting primer...

[@ET.s4]

Thats because its blowback operated and the the firing pin is a part of the sliding part.

[@barnesbuilt1250]

I just bought an M11/9 and plan to replace the sear, trip, trigger and safety. This greatly helped explain how it all works together. Its so simple I love it.

[@No_69187]

just make sure you dont lose it at an boating accident after the conversion

[@sonnysantana5454]

George Ingram is still the man

[@iminsideyourwalls9432]

I don't understand how the firing pin goes back and forth when the trigger is kept pressed. Is it the spring that's used that has a maximum range of tension or something else?

[@turbolegend3976]

It’s supposed to be a fixed firing pin, but I’m also having a hard time understanding it because the round must slip under the extractor claw without being blocked by the pin. It’s a fixed pin tho because it’s an open bolt weapon which makes sense

[@CyberCyrus313]

World of Guns is amazing, and so is Call of Duty Cold Wars OST. Like how you used its theme.

[@yasinbaki8470]

you did a good job. I respect. But it is very sad that you did not address the needle and nail part

[@alexandermadrigal571]

Interesting

[@jds2048]

Right. Video popped up on my feed. Never knew it had an open bolt system

[@xxdizannyxx]

Can u show in 1 of these videos what would happen to my caulk if I shoved it in the open bolt while firing full auto before I try it on my uncles mac-10 I would like to know what to expect. Thank you

[@americangangster1911]

Pain

[@mattoyyoutubechannel5494]

Verry nice

[@xxdizannyxx]

@@americangangster1911 thanks for the reply. That sounds lovely and I may just unload my own lube in the chamber and feed ramp... hopefully I don't get any on the firing pin or the firing pin Channel, right? Might have to suck it out if that happens

[@Nostradamus_Order33]

I spit 💦 my coffee ☕️ out. 🙏 🤦🏻‍♂️

[@АлександрЖданов-ш7ь]

А. где. у. него. ударник. ? Это. из. такого. стрелял. Данила. Багров. в. " Брат. _. 2. ". ?

[@jaimegomez9005]

Hace falta un modelo con cargador de más capacidad y cal 45 ACP

[@unfortunately_mortal]

love the 9mm 45acp interchangeable barrel diameter XD

[@keiichiro009]

INGRAM、M10のフルオートは､違法ですよ❗

[@Fish-guy]

무슨 프로그램인지 아시는 분?

[@joebob502]

That background music tho 😂😂😂😂

[@borismemedov]

If u are gangsta enough, u can fire without proper firing pin lul.

[@americangangster1911]

Fixed firing pins are a thing.

[@andradeschannel5682]

Pdf

[@sidpap241]

Tem desenho PDF ?

[@alexfreitas8111]

Qual programa ou site usado aí?

[@TetraTitanio]

Ingram lore:

[@cicero4irmao320]

Já quero fazer uma

[@omkr0122]

Hey! This is the gun that shot the guy who shot Marvin in the face!

[@Aglassact77]

Very cool video thanks 😊

[@сварщик.т.т]

Интересна ударны баек где и как зрываются капсул

[@ebs777]

These things work miracles in a phone booth

[@cicero4irmao320]

Amo muito seus vídeos e essa Arma mais ainda

[@americangangster1911]

Obrigado eu aprecio isso.

[@SpecialOperator]

Black Ops Cold War theme. I love it

[@SpecialOperator]

It's Bell's theme right?

[@faustoangelicopaiva1602]

Qual a medida das pessas desta

[@eduardofacu]

mac-10 lore :

[@egildonfrancisco609]

Legal top..

[@romilsonsoares1199]

Top top top

[@JB-pb9xv]

Looks cool, but the whole trigger function is fabricated incorrectly. This looks like it would actually work though, however there is NO "internal hammer" in this model to hit the firing pin.. An unless maybe the Cobray models are different, trigger function wise.. It's actually much simpler then this model, an is nothing more then a "hook" that the trigger squeeze pulls back. An unhinges, sending the hammer flying forward. An then a hammer piece that's hooked on the top and bottom, that basically catches on one end that the trigger releases. An the other end that prevents it's from going full auto.. Although this may be legitimately how a fully auto functioning version is built and operates, when there is a switch to change between full and semi auto.. Pretty cool way to learn the inside function and mechanics of a firearm though.

[@americangangster1911]

No you are incorrect.The original Ingram M10 had a fixed firing pin. Watch this video ( kzbin.info/www/bejne/eIacnImfo6Z2j7c ) and jump to 17:10. It doesn't get much simpler than an open bolt, blow back machine pistol with a fixed firing pin.

[@VolReed]

So you’re telling us how it works but have never used or even touched one? One is sitting on my coffee table in front of me right now and this is exactly how it operates. No it doesn’t have a hammer. As soon as a round is in the chamber it’s firing. Thanks for your ignorance tho…

[@juanobduliooneximoortiz9521]

Buen video

[@НинаШолматова]

🤧

[@ronaldkwan8908]

Wow 🤩

[@santosmartinez4183]

Excelente

[@terrencemckenzy3679]

Such magnificent work illustrations