How ABS Works || Anti-Lock Braking System Explained || Single Channel and Dual Channel

[@gurpreet_bmw]

Bro!!! 😍 This is what i was looking for!!!. I was searching for the video on how the ABS really works. Everybody else (won't say the names) on youtube just summed up the ABS to the sensor on the tone ring and ECU near the throttle body which keeps observing the speed of the vehicle but nobody even described the term HCU let alone explaining it!! 😂😅... I knew it that the mechanism has to be somewhat like this only that's why i searched again and again, video to video until i saw your video with a thumbnail of ANIMATION (which obviously makes it a lot easier to understand). I knew this video will get my job done. You taught us the real mechanism bro. You taught us the real physics behind this... Thanks alott brother.. Your efforts will pay you.. Ride hard Ride safe ✌️ 💯. May God bless you ❤️ PS : This is the second time I've commented on a youtube video 👌🏻🤗

[@AjithBuddyEnglish]

💖💖💖 I don't know what to say. My eyes are wet with tears of joy. I've got a lot of thankful comments, but this one is above all. You're welcome Gurpreet Singh😍 and thanks for watching my video and the wishes and blessings 👍🏻💖... Keep supporting...🤝👍🏻

[@sreesree1117]

Bro can you tell how a cornering abs works???? Is this as the same as normal abs?? Hoping a positive reply from you

[@HanselHessUnfiltered]

@@AjithBuddyEnglish bro thank you so much for the effort . I am also from Kerala. Adipowli animation, you made it easy to understand. Thank you

[@RanjithKumar-jd4vz]

😊😊😊😊😊😊😊😊😊😊

[@RandyGomez]

I don't usually comment on videos but man.. this was very informative and illustrative, easy to understand. Good work! Keep on making videos like this.

[@AjithBuddyEnglish]

Thank you!👍🏻😍 Randy Gomez. Comments like this give me so much energy to go forward..

[@justicesinhavlog1334]

Fault in ABS break in new bike TVS RTR 1604v. No breaking in rough roads. May cause life loss. Found helpless always got a new date by Customer care, Showroom[Binsar TVS],Service Center.Complain -141790, pending since one month.

[@AjithBuddyEnglish]

Really sorry to hear this. Hope the problem be rectified at the earliest

[@rsvlogs8709]

Yes if we apply brake aggresively it kicks back and doesnot allow to brake instantly

[@humanswithmachines]

Is there any chances to fail the abs system?

[@AjithBuddyEnglish]

Definitely, but then the abs light will stay 'on' while riding, and thus warn us.

[@TechelperIn]

keep it dude, well presented complicated topic.

[@AjithBuddyEnglish]

Thank you bro 😍

[@Pertamax7-HD]

Ok sir

[@AjithBuddyEnglish]

👍🏻

[@etherlords88]

Is it only applied to the front brake or there could be motorcycles with dual abs as well?

[@AjithBuddyEnglish]

The animation shows single channel system, but it's same for the dual channel as well. Everything would be double except the pump and in a single unit.

[@viveksharma-pq2mt]

Abs increases the stopping distance or it decreases the stopping distance when compared to non abs bike!

[@AjithBuddyEnglish]

Normally decreases but in some cases like in offroad, it increases the stopping distance.

[@mkj10101]

1. The kind of information you provided in the video deserves a good level of animation as you narrate. 2. In dual channel abs, would the correct way to apply brakes be hitting both the brakes together? I hear a slight metal click sound when I apply the rear brake with proper pressure. Stupid mechanics in the service centre have no idea what it is. Do you know what that is?

[@gregmatty6393]

Short, sweet, and to the point. First class presentation on how an ABS system works. Your animation shows a lot of effort went into this video. I'll spread the word.

[@rakeshgoude]

Wonderful effort. What an illustrative video 👏😊. Keep up the good work and do many more like. So far this is the best video that I have seen which explains how a disc brake and ABS works. Awesome buddy👍

[@AjithBuddyEnglish]

😍😍 thank you Rakesh. Yeah I will, keep supporting👍🏻

[@sartajalam4977]

Bro can you tell why the abs light not blinks in Apache 200 bs 4 Bluetooth varient

[@razu1976]

Yes!!! So many explanations just mention sensors... a pump, and some valves... this actually explains how it all works. Nice one!! 👍👍👍

[@saiprayastha7141]

Awesome job this is my first time to see a video on your channel and that’s amazing one, i have one doubt i have apache rtr 200version 1 can i install dual channel ABS on my bike please help

[@AjithBuddyEnglish]

Thanks brother 😍 Yes you can buy the parts and fit into your bike. But you have to find a good workshop or ask the service center

[@pradeeprai2011]

It will cost more than your bike. Anyways, you can try.

[@ravisehrawat9051]

Great job brother... You did nicely... You make this vary simple to understand..

[@AjithBuddyEnglish]

Thank you brother 👍🏻💖🙏

[@Neil197]

Thank you for taking so much efforts to make this video. This was extremely informative and helpful for clearing ABS concept. Cheers.

[@AjithBuddyEnglish]

You're welcome Swapnil 😍👍🏻

[@nagasrinivas4619]

Bro ..nuvu teluge kadha😂buttler English aythe..inka maname

[@prabhathsaviour3003]

കേട്ടാലെ അറിയാം നമ്മടെ മലയാളി ആണെന്ന്... കൊള്ളാം..

[@AjithBuddyEnglish]

💖

[@sripradaadiga130]

I was looking for this video. Thanks man, you have explained it beautifully.

[@AjithBuddyEnglish]

Welcome👍🏻and Thanks 😍

[@babafakruddin9656]

Hi, your explanation is super.. I own a ktm duke 390 2016 model 1st generation design , em facing issues in ma bike related to abs, abs stopped working in ma bike.. Some time it will work when the bike is completely wet.. It will be helpful if you give some suggestions..

[@AjithBuddyEnglish]

Thank you Fakruddin👍🏻💖 There may be some loose connection or something, that's why it's working when wet.. If you know where it is and and how to, try to remove and reconnect the ABS wire connector plug.

[@sanupamu]

Hi, I have fz25 2019 ABS version bike. When I applied hard breaking break paddles are vibrating. Is this normal? Is this occurring for solinoid valve?

[@AjithBuddyEnglish]

Yes, it's normal and the sign of abs working

[@deepakd6161]

Very informative. Please do make video about maintenance of ABS brake like replacement of brakepads & bleeding of ABS brakelines.

[@AjithBuddyEnglish]

Yes sure, Deepak, thanks 👍🏻💖

[@weekendwarrior8198]

Hi I won Dominar 400 abs When I go 40 mph abs working fine When I go 50 above abs not working. I check abs sensor it's fine. I go service center they only force me change full abs kitt

[@AjithBuddyEnglish]

If anything faulty with the hydraulic unit or its ECU, they'll change the whole unit that's the practice brother..

[@terrybrown8411]

Ajith the travel buddy is it normal for the solenoid pack to be a little loose? Mine are loose on my 2005 GMC Sierra and I’m having issues with abs and brake light coming in at the same time and it’s creating all kinds of problems! I’ve already soldered all my pins on the circuit board but also noticed the coils are loose on the solenoid actuators!! Plzzz let me know whether thats normal or do they need to be tight with no movement? Thanks

[@AjithBuddyEnglish]

Hi Terry Brown, I am really sorry to say that I have no idea about GMC Sierra. But I think the solenoid pack should not move. Kindly do some more search on the KZbin, there are some videos of the Sierra ABS module here. Thank you

[@partha1h]

Need help with my abs issues. My dominar is 2.2 years old and recently I facing an issue with my rear wheel abs. When I turn on my ignition the rear wheel abs works as it to be. But after applying brakes twice or thrice the abs indicator lights up and my rear wheel starts skidding when I apply brakes. But my front wheel abs works good. When I shred my issue with the service guys,they couldn't get me any solution but asked me to directly change my abs unit. I just wanna know your suggestions for my issue.pls help

[@AjithBuddyEnglish]

Hi bro, there maybe some problem with any of the solenoid valves, most probably the isolation valve, and they may not disassemble the unit and change that part. That's why they are asking you to replace the whole part. Search a competent mechanic to do that kind of work with any good local workshop, else you should change the whole unit as they said..

[@HariKrishna-qd7kc]

It was very simple to understand because of You bro... You're a good teacher 👍

[@AjithBuddyEnglish]

😍 thank you Hari👍🏻

[@TheBiker200]

Hey bro... The video is very good... However I have got one question I own Apache RTR 200 ABS, but when I apply brakes then rear wheel gets locked... Means nit completely, but bike fishtail a lot and this happens on the speeds above 60kmph, cement roads, smooth tarmac, and if the the handle is slightly turned.... I'm so frustrated with this... I can feel the pulsating movement in brake lever... However the rear tend to lock easily.... Do you know any reason for this..?

[@AjithBuddyEnglish]

Thank you👍🏻💖 I think some thing is not ok with your ABS. First check for any dirt accumulation on the rear wheel toner and sensor. In my experience and in theory it should never lock at all. If no dirt then something is faulty, Puneri Ajay

[@sushovandey5209]

If i suddenly apply only front brake of abs system.... my front brake liver create reverse presure on my hand...is it normal.. ? Please help me

[@AjithBuddyEnglish]

Yes, definitely, that's the sign of ABS working properly, Raj Roy

[@rajivjha123]

This Video reminds me of College professor explaining some topics which I never get :) . Sorry , I did not understand anything .

[@AjithBuddyEnglish]

😄 sorry to hear that.. try to watch it one more time

[@Immazine]

How long shall we keep break shoe of Apache ABS - I mean the time we have to change them Or shall it b changed as normal breakshoe life of say around 20k km

[@AjithBuddyEnglish]

It has no standard time, just check the pads now and then and change it with some material still remain on them. My front pad had almost worn out and changed at 5500km.

[@surandranbalasingha9209]

Bro I am for sri lanka , Please tell me how to keep back wheel in a correct wheel alignment ,,, Discovery 125

[@AjithBuddyEnglish]

Hi Surandran, the alignment markings on both sides of the swing arm, at the wheel axle should be the same. If not adjust the wheel alignment. Make sure there is enough free play on the chain as well.

[@bajivali7193]

I have a one doubt everyone using rear brake only generally but all the company's provide abs front wheels single Chantal abs May I know why?

[@AjithBuddyEnglish]

That's because when you brake the weight of the bike shifts to front wheel. So without much weight on the rear, the rear wheel tends to slip easily. On the other hand because of the added weight front brake becomes less slippable so more dependable. Also the rear wheel skid can be catched without much effort, but it's difficult to recover from a front wheel skid. Hope you get the point

[@MrAsjagtap]

I would like to major difference between CBS and ABS. Should I buy hornet with abs or cbs?

[@AjithBuddyEnglish]

CBS is a brake force distribution system between the two wheels. It will not prevent a wheel lock up or skid. On the other hand ABS will not distribute, but monitor the wheel speed and avoid the wheel skidding by adjusting the brake force. You must go for the ABS one, it's a life saving technology👍🏻

[@TurboKai]

brother your explanation is awsm, also please explain can we install dual channel abs in single channel abs system by adding extra abs unit with using same sensors of single channel abs, i have pulsar ns 160 with single channel abs with sensor on both wheels i'm looking for abs unit to install with rear disc brake by using combination of single channel abs system sensors. please guide me if it is possible thankyou.

[@AjithBuddyEnglish]

Thank you 💖 It's definitely possible, but you need a knowledgeable mechanic and all parts for the job. My wishes 👍🏻🎉

[@TurboKai]

@@AjithBuddyEnglish can you tell me which i needed to get abs ?

[@SourceSecrets]

Awosome video, better explaination. But please try to avoide the spreading of false knowledge. ABS system works 3 times a second, not 10 time. It has a maximum posiblity to release and apply brake 3 times a second

[@AjithBuddyEnglish]

Thank you👍🏻💖 As far as I know it's 8 to 16 times a second. 8-10 times in low cost units and higher in higher end units

[@rafisameen2004]

Pls can you tell how to apply the single channel ABS.do we have to apply both front and rear brake??or front brake only??

[@AjithBuddyEnglish]

You should apply front brake first and then apply rear carefully and with lesser pressure. If you need more brake force use front hardly as it's more dependable

[@daffydill5807]

I have a Yamaha X Max 300. What causes a ping sound when the abs light goes off? Thanks

[@AjithBuddyEnglish]

Sorry, no idea buddy..

[@krishnabe4865]

Don't 10 time per sec .. He is 12 time per sec

[@AjithBuddyEnglish]

👍🏻

[@kirankumar-hf6rd]

Hi my self kiran iam planning to buy a bike with abs which will be the best which comes in lower price can you please help me

[@solanki0412]

I have fz25 dual channel ABS, when I apply the rear brakes I don't see that the braking works. I asked the service guy and he told "wo apan ko pta nahi chalta but brake lagta hai" but I don't feel that braking is working. Can you confirm that service guy is right or wrong and I don't feel braking is working but it works. Please help me clear my concept.

[@AjithBuddyEnglish]

Try to brake really hard with only the rear brake. If it's working the bike will stop in no time also there will be pulses on the pedal due to ABS activation.

[@solanki0412]

@@AjithBuddyEnglish tried that but it isn't happening that's why I'm in doubt

[@chiachic2294]

Well done brother. Well presented and very informative.

[@AjithBuddyEnglish]

Thank you brother💖

[@harikrishnanp97]

Well explained video.. you are from tvm ? I have a doubt.. what will happend if abs motor or solenoid malfunction..? Does we still stop the bike like in non abs bikes..?

[@AjithBuddyEnglish]

Thanks brother 😍 Yes, definitely👍🏻 there is springs in every solenoid valve so if it stopped working, the valve will come back to its normal position and will work like a non abs brake. Same with the motor too, the ECU will detect that and stop all functions.

[@harikrishnanp97]

@@AjithBuddyEnglish thanks bro 👍 it was one of my concern

[@AjithBuddyEnglish]

👍🏻😊

[@sachinraghunath5148]

Is that posible to bulid front and rear brakes in one liver press.. with abs function

[@AjithBuddyEnglish]

It's not simple. But it exists and is called combined ABS by Honda.

[@29csamiran]

Which one is better single channel or dual channel?As we know 70% load occur on front bike,that's why all bike manufacturing propose single channel and also economical. But my question is double channel ABS is really needful?What is your recommendation in this said matter?

[@AjithBuddyEnglish]

Of course! DUAL channel ABS Samiran. Because of the fact that most of the weight is going to the front wheel while braking, rear wheel definitely skid on hard braking, and that will off set the rear of the bike from a straight line and make front only ABS useless. Or we have to keep that in our mind and depend only on front brake on hard braking. But at least 30% of the brake force is coming from rear brake, so if you have rear ABS too the bike will stop much earlier and without any drama. Single channel is only for cost/price cutting and has no other benefits.

[@AjithBuddyEnglish]

Yes. But as I said, that's for cutting cost..

[@tonymathew5618]

Is there an after market abs for Apache 200?

[@AjithBuddyEnglish]

No. If there is one it will not be a reliable one as original, Tony.

[@biplobsoren1823]

How to work the dubol & 4 wheel ABS break system in the same time on a bike or car

[@AjithBuddyEnglish]

There will be sensors on all wheels and twice the valves and lines in the case of motorcycle, and four such systems in a single ABS unit in 4 wheelers.

[@mmubarakbgmailcom]

Bro is there any smart diagnosis tool for bike...? Like a OBD tool

[@AjithBuddyEnglish]

Yes, definitely. It is needed to diagnose and bleed the ABS system. They also use a tab for the purpose.

[@kunaltgalpallewar]

how do I know the dual channel ABS is working or its active ????

[@AjithBuddyEnglish]

If it's faulty 'the light' will stay on when starting and running. Or you could check it with braking hard - one at a time. If it's working your brake won't lock and you will feel that pulses/ kickbacks on the lever.

[@asifrehman4891]

Dear friend nicely explained. Thanks. Can you explain us, what is 4 caliber ABS system in KTM 390 bikes. Is this more efficient. According to you, which bike in India has good efficient ABS braking with 300cc bikes.

[@AjithBuddyEnglish]

Thanks Asif👍🏻💖 Duke 390 has 4 piston caliper front brake with dual channel ABS. This means it has 4 pistons in the front caliper to push the brake pads against the disc, while most bikes have 2. In short more powerful braking. I think 390 has got the best brakes in that category.

[@shahabajkhan2533]

Bhayaa mere paas pulsar 220 hai 2019 ka magar us main ABS nahi hai while main opposition hai to kaya abhi ABS laga sakte kaya ye mera Mobail Nambar 9595523932 kuch raha to call kar ke batana bhayaa thiek hai

[@AjithBuddyEnglish]

Naye ABS vala 220 ke parts kharidkar usme laga sakthe ho bhayya. Apke udhar ek acha sa work shop pe poochna, ya service center mei.

[@gowthamdheenadhayalan5981]

How to maintain the bike in mint condition always... even after years?

[@AjithBuddyEnglish]

A lot of things like riding habits, maintenance and climate will affect the life of a motorcycle. I will make a video on that Gowtham

[@ParabhdeepSingh]

Which bike do you prefer for dual channel abs in between 2lakh inr

[@AjithBuddyEnglish]

Dominar 400 (2019)

[@shounaknadkarni670]

So mainly we have to apply both brakes while braking...

[@AjithBuddyEnglish]

Yes, for the best braking efficiency.

[@soorajtr1752]

Very well explained. Location:-Eenjackal/Chackai,TVM??

[@AjithBuddyEnglish]

Thank you Sooraj👍🏻💖 Yes, chackai bypass

[@soorajtr1752]

@@AjithBuddyEnglish 😎

[@ringawale280]

Nice explanation bro I like it👍👍👍👍💯💯💯👌👌👌👌

[@AjithBuddyEnglish]

Thank you Raj Sawant👍🏻👍🏻💖💖

[@sujalannapurna6737]

You earned a subscriber by this. There is a question, i have been having some issue in my abs apache 200 abs. The issue is the brake lever often in good pressure but sometimes it just comes back and touches the acceleration bar. Just to.make it clear if the pressure is correct it wont touch the acceleration bar no matter how hard i pull it. And sometimes it gives some sort of pumping brake on light braking. Have tried all options, changes the lever set, new pads, air issues checked. Could you please suggest something?

[@Abhinay_Limbu]

2:25 so there's no abs for about 10 km?

[@youmi4985]

Shame shame to supreme court first clear the road and streets first built flyovers and all things you said to government first bastard Government of India supreme court judge was sleeping between money and companies they don't know about what government was doing state government 420 judge money making company from Indian people Indians request to judge supreme court judge please order to all 29 governments CM on the road and streets after you come to abs and automatic light systems Atlas systems

[@gauravsuryawanshi663]

I have a small question... If the wheel speed sensor wore is not connected will the ABS work??? Also Is there any difference between ABS and disc brake? Please help!!!

[@AjithBuddyEnglish]

If the speed sensor wire is not connected the ABS will NOT work. Every brake which has that kind of DISC is a disc brake. ABS is a computer module controlled system that prevents the disc brake from locking in hard braking or in any circumstances. Hope it's clear Gaurav 😊

[@gauravsuryawanshi663]

@@AjithBuddyEnglish thanks Ajith the video was full of knowledge... Keep it up

[@AjithBuddyEnglish]

You are welcome and thanks brother 👍🏻💖

[@Deepak-vl1jl]

At first i was like it doesnt matter if i dont have abs when i buy a bike since i could save more money but after watching this i understand how essential it is and will definitely get it

[@AjithBuddyEnglish]

Great brother 👍🏻💖 ABS is indeed a life saving technology

[@bhattchintan2223]

Ajit buddy i have TVS apache 200 4V but without ABS cause it was not available in last may, now how can i get install Dual channel ABS and how much it will cost if you can give me some idea it will be helpful

[@AjithBuddyEnglish]

Hi buddy, you could purchase all needed parts and get it installed. You may need to change the wiring kit also apart from the ABS unit, tubing and toner rings. No need to change the calipers. Cost may be in the range of 20k. Find a good work shop or enquire it in the service center.

[@bhattchintan2223]

@@AjithBuddyEnglish thanks a lot and information in the video is way too good

[@AjithBuddyEnglish]

Thank you, Bhatt Chintan💖 and all the best for your project👍🏻

[@shiblishanu4962]

vai main mera 4v main abs install karna chata hun.. main kiya kar sakta hun? mere country me abs version nehi ayega.. kiya abs unit alag se purchase kar sakta hu?

[@AjithBuddyEnglish]

Parts purchase karke fit Kar sakhte ho. Which country, Bangladesh?

[@ajithkumar1136]

Super information man...

[@AjithBuddyEnglish]

Thanks man👍🏻

[@ashish6988]

@@AjithBuddyEnglish Bro make a detailed video on installation of ABS in a nonABS bike.

[@prashantkulthia5542]

Very simply explained such an important thing thanks man!

[@AjithBuddyEnglish]

You're welcome Prashant 😍👍🏻

[@Ibrahimmj]

Good and brief explanation...👌🏻👍🏻 In Easily understandable English

[@AjithBuddyEnglish]

Thank you brother 💖

[@bhupendrarathore5907]

Apache 1604v bike kase ha leni chaiye ki nai

[@AjithBuddyEnglish]

160 4v is a good bike Bhupendra

[@SanthoshKumar-to4hz]

this animated Video was very good explained, Thanks a lot for your efforts to make this video.!!

[@AjithBuddyEnglish]

Thanks and welcome Santhosh💖

[@cemeterygamer8093]

Bro when did tvs company applied ABS in Apache bikes in 180 before 2013or before 2012,

[@AjithBuddyEnglish]

In 2011

[@cemeterygamer8093]

@@AjithBuddyEnglish thanks a lot bro

[@AjithBuddyEnglish]

You are welcome bro👍🏻

[@youareamazing2611]

Very good video.

[@AjithBuddyEnglish]

Thank you Pranav 😍👍🏻

[@lorenzogarcia9890]

is it possible to intall an abs system into a non abs motorcycle?

[@AjithBuddyEnglish]

Yes, possible

[@iPritamHD]

Good job buddy.. video was very informative!!

[@AjithBuddyEnglish]

Really great to hear that thank you 😍😍

[@mohitbairwa]

Ajit Bhai I need your help. My bike's having some problem in abs.

[@AjithBuddyEnglish]

Yes bro...

[@mohitbairwa]

@@AjithBuddyEnglish I feel so much pump on my front brake lever that it's almost unusable at speeds like 50+kmph, is this normal?

[@KumaravelSundaresan]

nice video ...i am having noise sound in rear disc brake after changing brake pad also noise doesnt go...why

[@AjithBuddyEnglish]

Thank you Kumaravel👍🏻💖 Dust or sand in between the pad and disc is the primary reason. If you changed the pad then check the disc mounting bolts, pad sliding mettal clips for tightness etc.

[@KumaravelSundaresan]

@@AjithBuddyEnglish after checking i will tell you that the issue is solved or not

[@AjithBuddyEnglish]

👍🏻

[@brahmachary9291]

Hello sir.. it is very informative and useful for as am in functional safety. Can u pls explain me the same for car for four wheeler how it works with clear animations?. Pls share the links with iso and dump solenoid working operation.

[@AjithBuddyEnglish]

Thanks 😍 and I will try to do brother👍🏻

[@yadavyash9644]

Sir my rear brake padel in r3 backing up continuosly when i braked hard what is the problem is it abs or any brake problem

[@AjithBuddyEnglish]

It is the ABS. That is the pulse from the working of ABS. Nothing to worry, instead cheer up because it's working perfectly.

[@yadavyash9644]

@@AjithBuddyEnglish thank you so much sir. You are the best 👍👍

[@AjithBuddyEnglish]

😊😇 welcome Yadav💖

[@ridersheaven3279]

Bro is there possibly. Non abs bike change as an abs bike ??

[@AjithBuddyEnglish]

Yes, ABS can be fitted to a non ABS bike

[@UnniKrishnan-pb4nc]

Nothing much more to say . Good presentation and it is easy to understand . Keep it up Bro . All the very best 😊

[@AjithBuddyEnglish]

Thank you Unni Krishnan 😍

[@vankabalamaniteja7885]

I have Apache 160 4v dual disc can I upgrade to abs price will be

[@AjithBuddyEnglish]

Yes you can add ABS, but will be expensive, may be above ₹25,000

[@vankabalamaniteja7885]

@@AjithBuddyEnglish ok but I want upgrade my bike please tell me the location fo be

[@pawandhiman21]

Does ABS work in downhill in neutral, if have kept the engine off and ignition ON?

[@AjithBuddyEnglish]

Yes, but that's not good for battery, as when ABS activates it will use a lot of power from the battery.

[@pawandhiman21]

@@AjithBuddyEnglish okk

[@You5xD]

Hats off to you for ur effort bro. First time ever seeing such a video which is easily understandable.

[@AjithBuddyEnglish]

Thank you Midhun 😍👍🏻

[@midhunthomas6256]

Definitely a malayali

[@AjithBuddyEnglish]

Yes😉 please checkout my Malayalam channel too: kzbin.info

[@kevinh.3865]

Hello! Can we install ABS on a Non-ABS Bikes?

[@AjithBuddyEnglish]

Definitely

[@indranisatpathy8734]

Your video is okay but yu must choice rs 200

[@AjithBuddyEnglish]

RS 200's performance is okay, but it has only Single channel ABS brother

[@vedsukhathankar4633]

Plz make vedio on how to make abs switch

[@AjithBuddyEnglish]

Yeah I will👍🏻

[@faysalmahmud2611]

bro can u explain it in bangla language. Pls.

[@AjithBuddyEnglish]

Sorry bro I don't know Bangla but I have done it in Hindi also, here is the link: kzbin.info/www/bejne/ranFaImiYpiZrbM

[@susilocipto5366]

if HCU has problem or doesn't work, can we repair it?

[@AjithBuddyEnglish]

No, it's a sealed one, no parts available, the whole unit must be replaced..

[@susilocipto5366]

@@AjithBuddyEnglish so need to replace it right ? Thanks for your info.

[@jochenschroder5574]

Hello Ajith ! Congradulations for this amazing video !!! Thank you very much ! I would have several questions about how to bleed such a ABS, I have a Satelis 125 with only front-wheel-ABS and Peugeot doesn' t give me any information how to do that. Can you help me ? Can I contact you via eMail ?

[@safayatjamil2719]

is the ecu same as motorcycle's ecu on fuel injected bikes? or is it used for braking system only? for context, I am looking forward to install an abs system to a non abs bike which has two disk brakes.

[@rajeshakash8423]

Bro.. which breaking system is more efficient among pulsar 150 abs or unicorn 160 abs or FZ-S abs. Apache RTR 160 abs ...plz suggest which is having best breaking system among these..

[@UmarKhanRTR]

Sir please respond......I have an apache rtr 180 abs bike......some one has cut off my ABS wire and my digital meter is not working.........What will be the cost of a new wire??

[@madhuks7513]

Hi bro can you suggest me how to apply both breaks on slippery surface like mud and small stones on the road I have APACHE RTR 200 4V DUAL CHANNEL ABS Last week i have met small accident because of brakes locked when applied suddenly Please suggest me

[@abhishekds4676]

Bro..you just explained it in the most simplest way🔥🔥..thanks a lot bro🙏

[@AjithBuddyEnglish]

😍 welcome bro 😊

[@tuxnoel]

Good video. I think we should learn to drive safely without such aids.

[@AjithBuddyEnglish]

Thank you Noel Filatov 👍🏻💖 yes

[@CookingWithJackDaniels]

It’s nice to have it and not need it than to need it and not have it

[@SohanNalla2596]

Which are best 150-250 cc dual channel abs bikes in India at present? Which are overally good and safer

[@Avv83]

It's great that you have selected Apache RTR... I cherish the nice feeling while designing it ...

[@AjithBuddyEnglish]

Have you worked as designer in TVS?

[@bbx2206]

ur a genius man, and by that it means making a complex pattern into a simple easy to understand ...ur a good teacher

[@AjithBuddyEnglish]

🤩😍😍 thank you so much brother👍🏻💖

[@Buck1954]

Too bad it's too expensive to replace the ABS pump module. Need a video on how to repair the module. My isolation valve seems to be permanently closed. Does not allow me to bleed the brakes. [add] I thank you for this explanation of the system.

[@sajanrasal2475]

Thanks for explaining the abs Concept on Tvs Apache bike 😎😎😎😍😍my favourite bike Tvs Apache 😘😘😘😘

[@sreesree1117]

Bro pls explain the Working of cornering abs Is cornering abs and normal abs works the same??????? Please do reply...

[@varun4751]

Hi, My bike is Apache 200 4v bs4 smartxconnect variant. Abs light of my bike is not blinking ever since I bought it in October 2019. I contacted the TVS service center and they told me that for newer versions they had removed the blinking of abs light and it only lights up when ABS is not working. Is it true?