How Bad is $20 eBay Pre-Cut Window Tint? *FAIL ALERT*

Get Ceramic Coating for Your Ride:
goo.gl/xiUzFL
USE CODE samcrac25 for $25 off your first bottle (limited time)
So eBay Pre-Cut window tint is super cheap, and they claim it installs very easy, but I've had little success trying this stuff in the past. Let's try to install it on the Jaguar!
Email Me: [e-mail]
Instagram: / samcracc
This video is sponsored by AvalonKings.

[@gasolineimagesinc.7133]

As a detailer of 20+ years, nothing says "sleazy used car lot cheapo paint job" than over spray in the wheel wells, exhaust, and other under carriage components. It sticks out like a sore thumb. Do yourself a favor and black all that out with a rattlecan.

[@ScottPC]

Gasoline Images Inc. aren’t you more worried about the little to no prep for the ceramic coating...

[@THOMMGB]

I would not have done that job in the sun and I would've mentioned that the car needs to be just-washed clean.

[@DeadlyBreath9790]

I agree, screw the tint, black out the windows with spray paint

[@gasolineimagesinc.7133]

I know its a Maaco job. But why not spend $4 to hide the overspray? At least make it look a bit more professional

[@gasolineimagesinc.7133]

@ThatGuyNamedScott. C Very true. But seeing that the rest of the car is half assed, I expected nothing else.

[@fatscreen]

This reminds me of the time i tried to put a screenprotector on my phone.

[@himynameisbrianw]

screen protecters are easy clean your surface, iso alcohol it, and lay it on. tint however its hard af!!! i bought precut quality tints for my civic and i screwed up so i put it on pause for the longest time, but after watching sam struggle ima give it another shot!

[@ilikeboost4764]

Brian Gnow if screen protectors are easy I suck. Very possible.

[@scottyc3215]

Tip for doing screen protectors. If you get a piece of dust stuck under it, pull the corner up and use a piece of scotch tape to get the dust out. If you use your finger or a cloth, it just makes it worse.

[@ilikeboost4764]

Scotty C every time I do that or sticks to the screen protector and then it's really hard to get off.

[@scottyc3215]

Huh. Maybe there's a difference in screen protectors then. That always worked well for me.

[@PhoenixRCCrawler]

I just can’t watch this tragedy unfold.

[@DeadlyBreath9790]

Trust me it won’t unfold

[@scottcol23]

Sometimes he is the adult model of Jimbo

[@MrTimdtoolman1]

LOL! It was quite painful to watch no doubt.

[@yungtooli]

@@scottcol23 lmao its jimbo baby

[@DeadlyBreath9790]

Red calipers it adds 20 horsepower

[@kirankamble6669]

Yahhhh in our minds only 😋

[@bmorehemi392]

Effin Ebay precuts lol..:I bought one a couple months ago for my maxima taillights...TOTAL fail....I ripped it off, took my ass in the house and took a nap lol

[@Thedoodahman_]

Me rn

[@805NAVE]

The gray grille looks great, looks like metal

[@mrj-charles6383]

I used to help out at a cab company in DC. That Jaguar looks like the same color we painted the cabs. I would personally pay the $99 to get the car tinted. I can do the side windows fine just the back window is a no go for me.

[@matthorakova2677]

Mr Charles 99? What world do you live in?

[@randomrepair1680]

The fingers are because the window is a slight compound curve. The tint must be shrunk first on the outside of the window with a heat gun and the clear backer installed facing you. You spray heat and squeegee untill it sticks to the window with no fingers. The quality of the tint is probably crappy but there are so, so many tricks to doing it and everything needs to be perfectly clean. Always worth trying yourself :)

[@Venomcustomsllc]

Random Repair snap shrink takes 5 seconds, I’ve never put film on the window to shrink it (exclusion for rears of course).

[@ryanm9662]

Exactly at least use a heat gun

[@rossysossy]

Alot of this stuff is pre shrunk

[@B711HD]

@@rossysossy not precut tho

[@thewholecountryislaughinga8440]

Not for precuts bud

[@letsfixthis84]

I've got the same tint on my truck. It actually looks great. You have to spray the soap on both sides and everything will squeegee out. You won't have fingers, bubbles anything. And the instructions tell you to pull the "extra" tint outside of the window cutout first. If you don't it will rip the tint.

[@flippinchicago8815]

I would undercoat the overspray in the wheelwells.

[@couchrider6228]

Thought he was tinting windows what a DUD!

[@Sir_Leelord]

The grill needs to be solid black. And the bumper accents need to be black too

[@dylancranfill9067]

Lee Ludtke no

[@Gobbbbb]

yes

[@zim8236]

I agree

[@rickdees251]

And get that blue over spray off your tire for gowds sake.

[@RinneTraps]

Yes, please do this.

[@-JonnyBoy-]

I put some cheap pre cut tint on my jag 4 years ago. Still looks perfect now and the car is kept outside. Just have to make sure to install it well

[@jayryia]

I think the back section of the bumper behind the grill should be painted black. There's a cool lil paint called "Black it out" that works a charm for that

[@toddperry7260]

I agree the blue behind the grill looks like shit.

[@barneystinson2781]

Agreed

[@bluelight456]

Having just recently done a black magic window tint on my old truck I can absolutely agree that the wind will be most peoples number 1 headache. I don't have a garage and the wind ruined my first attempt. But I pushed through and managed to do all the windows myself saving quite a bit of money. Trick to get the tint into the weather seal is to pull out from the center of the window and finesse the sides down then slide the center in. Shrinking the tint at the bottom can help with the fingers, but personally I baby sat mine and used a squeegee every time they started forming until it was mostly dry and that worked fine. The windows already had old tint on them and most shops will charge you extra if they have to remove it (only fair). But Sam if you remove the tint be sure to use your heat gun and/or a steamer. Steamer makes pretty quick work when removing tint.

[@czamman]

Before installing put the tint on the outside of the glass and heat it up.. let the tint contour from the outside. Next, put masking tape on the fuzzy bottom molding inside. When installing the tint, get the glass drenched. With the window an inch down, slide the bottom in first make sure it's really wet. After getting the tiny behind the bottom molding then move it up carefully into the corner and top. The key is drenching it. Dish soap might work better, just a couple of drops. Keep drenching it while you squeegee. Let it dry 24 hours.

[@MitchellGuyon]

Got with the grey calipers. The red stands out way too much against the blue

[@yannmasoch]

I highly agree for the "grabber" tool. I have one and it is very very very useful for grabbing everything when working on a car such as bolts or tools falling under the car, inside the engine bay and so one!!

[@dreamemcee]

Sam, the cheap 20$ ebay tint is actually pretty decent, i had good luck with it my second time around after learning from my mistakes. You can't tint outside. I found it is infinitely easier for a rookie like us to actually remove the window from the vehicle and tint it, then re install the window. A little more work but you will get a perfect result.

[@hotrodpetesgarage699]

As a former Jaguar USA employee, I can tell you that the hood ornament is simply called "The Leaper" and the Jaguar symbol in the steering wheel is called "The Growler." There is no such thing as the "leaping growler."

[@georgemolwitz7112]

I thought the leaper was the classic Jag hood ornament so hearing it called a leaping growler confused me. Thanks for keeping me straight!

[@Samcrac]

Man leaping growler is just so much fun to say!

[@45AMT]

It's the best of both!

[@Graham_Langley]

It's also rhyming slang...

[@sjmotorcyclessjm9972]

in the uk growler means really hairy lady area! funny seeing as jag were originally british!

[@reedcampbell5325]

Thanks for the discount love on ceramic coat, looking forward to getting my hands on some

[@georgemolwitz7112]

Red calipers. Thanks for the doing a vid on ceramic coating. Super easy by the looks of it.

[@45AMT]

I've always found that it's much easier to install the tint on side windows by taking out the glass. I could never do the back glass though LOL!

[@3ddie21]

Applied coating in the sun and right after sprayed it with water. Correct me if I'm wrong, maybe it's different with ceramic coatings. You want the car to be cool to the touch and away from sunlight when applying anything to your car and you don't want to introduce it to any moisture for a few hours.

[@RTM459]

3ddie21 clean the hell out of it ,paint correct, wax remover then apply let cure for 48 hours ,also do it in the shade. A lot of steps before you even think of applying that ceramic

[@Samcrac]

Yes, a cleaned, room temp, prepped paint surface is always best, I used the sunlight to show the small area I did on camera, but I did the entire car under the barn after I washed it.

[@vloot2009]

Just washing a car ain't good enough, this coating ain't lasting poor prep job

[@Unlucky13_s]

You are 100% right. Old detail guys wouldn’t even wash my car and leave it in the sun. You would think “drip dry” the best. After further review, leave a wet car outside the dirt from the passing air just sticks to the car (because it’s wet) so you gotta dry you car (with the right rags) just to get a pro looking wash, any paint or clear coat application needs to be cool and dry. Other wise you are wasting your time.

[@johnhull6363]

Hey sam that cow behind you just said "eat more chicken" lol

[@bencolangelo3302]

I’ve tinted all my trucks myself. I have never done the pre cut ones I usually cut them myself but it took me about 3 cars to master it but once you learn how to do it it’s like tying your shoes

[@ATLOffroad]

At first I didn't like your color choice but after a few videos of the Jag I'm diggn the car. Now I'm looking at Jags online to buy.

[@harysuper]

4:20 I bought one of those at Sears a couple years ago! I’m glad I did! It saved me from braking my power steering pump. (long story)

[@LM-gq1om]

Love the grill re-do ! I think the red give the car a little pop of color. Great videos Sam, keep them coming.

[@ThijsVanDalen]

can you pull all that black window trim off and respray it to fix the overspray?

[@95TurboSol]

I did all my car windows with ebay precut tint and it came out really good, tint isn't easy to work with but with patience it's no problem. TIP keep a razor handy to trim anything that doesn't fit perfect. And also you need to clean your windows PERFECTLY before applying, the tiniest dust particle will show up as a little bump and bubble so keep everything clean.

[@juan2trill]

“And we’re gonna be ridin fishbowl” 😂😂😂😂😂😂😂😂I felt that

[@meademorgan6614]

I bought some pre cut tint on eBay for my car, all the pieces were too short. Wouldn't fit below the window scraper, without leaving about an inch gap from the top so I had to compromise with about a half inch gap all the way around the window. Ended up taking it all off and buying new tint and cutting it out myself.

[@TheTransporter1461]

In my opinion, silver is nicer because red is too loud combined with that blue

[@blakea216]

TheTransporter1461 but silver doesn't mock a certain food delivery service

[@MrArcticPOWER]

But you know red calipers ads 20hp? Even more if it's cheap can spray paint from Walmart!

[@flohri]

Ach was

[@fatguy1121]

As if the blue isnt loud enough lol.

[@TheTyisawesome]

GTO Blake they need to be red. +20hp

[@kingmartin214]

@samcrac the fingers happen when you don't shrink the tint to the window curve but for a first timer it's a good job

[@derekcomingo2197]

red calipers....i have that grabber tool, came with a long magnet. urs looks better mine doesnt grip hard

[@NotMeHere]

I prefer the silver brake callipers. I feel bright smurf blue is at really a colour that complements red but I think it’s going to be tough to revert the red callipers back to silver so might as well just go with it.

[@MitchellGuyon]

@samcrac please please rattle can the over spray back to Black, it screams ‘I have a back alley paint job!’

[@Traveling425]

Mitchell Guyon I agree, rattle can mat black inside the wheel arches and behind the front grille the blue look cheap.

[@barneystinson2781]

Agreed

[@TheSweetswed]

Your making me want another Jag. Miss my XK n even my XJ. I drive to far now and they ate gas but they drove SOOO nice and were made so well. Never had one of these. Was gonna get one when I got my XJ but I drove both n the XJ drove so nice I had to go with it

[@michaellangerman4615]

With the window tint to get the fingers out place on the outside of glass and heat shrink to the curve of the glass. Plus you have to peel the extra tint off around to expose the actually pattern of the window then you wont rip the film and its best to tack the film to the glass so you can peel off what they call the release liner.

[@alancooper7062]

I would suggest taking the door trims off when applying, it should give more room for tint at the bottom ???

[@willvwgli]

ill take care of all your tint dont worry! LOL im in orlando and been tinting for the past 11 years. this is great to watch LOL

[@alexyoungberg5232]

Paint the outer rim of that grill with the grey brother. Trust me it will look so much better

[@elijaha1134]

Alex Youngberg yes it would.

[@voytekl2407]

Where is the Video on a missing RS7?

[@randymorobitto5453]

Just a thought on the tint, since it's JUST you with no helper: A large, plastic tote, with the water/soap solution, and do all the "unwrapping" in there, so it and your hands are wet in the whole process, including when you take it out and stick it to the glass. Kind of like the water-slide decals for a model car. Edit: P.S.: Silver for the calipers.

[@s0nic79]

Does this Armor Shield stuff really work? Can`t find any unpromoted test. And can i use it to refurbish/seal headligts after sanding and polishing them?

[@MrTiger0002]

Thanks for the Avalon King deal... awesome! Second bottle even cheaper. Just do the checkout for the first one with the coupon and they will offer you the second kit just before finalizing it.

[@liamcody5060]

go with the red. Will you strip the paint off of the interviewer? all that paint will prevent cooling... not by much, but still result in a higher IAT. Awesome build.

[@keylay9453]

You should paint the grille black, I think it would look good contrasting with the tint (when you get it done) and the calipers should be red. PS, the blonde holding the camera is cute

[@iliaslamari7315]

Love your built. Just watched a couple of jaguar videos and I think it came out nicely. It's not the colour that I would recommend, but it doesn't look that bad at all. Their are some minor things that I would tackle if it was my car; 1. Firstly, I would black out the wheel arches because of the overspay with some body wax that also protects rust (if they were metal). 2. Chroom wrap or black out the trim pieces on the bumpers that are painted blue. Now it just looks odd. 3. Black the rubber/plastic with some "back to black" compound and clean up the interior by detailing it. 4. Fix all the overspay with Aceton/paint stripper. Be careful with it but overspay is a no go on a good paint job. Hopefully it's advice that can help you. Would love to here if you agree on those thoughts. Just became a sub..😄

[@johnranieri7247]

Damn brother you REALLY need to learn how to spell or get a modern phone with autocorrect because you misspelled every other word in your entire comment... damn

[@eman0621]

From having my cars tinted in the past, I think it's way easier if you remove the door panels so you can get right in and cover the bottom of the widow(s). Plus you can adjust it easier with the soapy water. You need to clean the windows first with a squeegee and a dust free environment. Let the pro's do it, honestly. All the hack DIY tint jobs I've seen, lots of bubbles. Car looks pretty good. Keep it up.

[@thormcgee968]

Bought pre cut tint from Bay and installed it with no probs. Did my truck 5 years ago, car 3 years ago and other car 6 months ago. No fade or purple. Looks as good as the day it was installed. Believe me when I say it is your lack of skill that was the main prob. Using a sharp edged bondo spreader is a quick way for scratches and rips. Rubber squeegee and soft edged tucker would have helped.

[@williamduhamel7726]

Drive through St Pete and see how fast you get pulled over because it’s to dark. I went to a place to get my windows tinted in 06. A few months ago certain spots started to bubble. He retinted the whole car because stands by his warranty. It's called Tint studio or class on glass off gibsonton dr

[@b_chill]

Did you prep your car pre ceramic coat? If so what method

[@joes.7536]

I have pulled off a tint job on my own with cheap tint on my work truck. But for $300 only at my local shop I get a sedan done in premium ceramic 3M film with a 5 year warranty. And if I settle for standard film I can get a sedan done for $160. Professional and perfect. So I'm definitely taking that route for the future. If It was like 500 to get a car done. I would spend the time to learn. But for the money the professional job with the warranty is a 👍

[@treys9123]

Suggestion.....Paint the wheel wells black to cover up that blue over spray...do the area behind the front grill too.

[@timpollard1774]

Do you have any of that grill paint left? You should paint the bumper top behind the grill that colour, or black. Will make the grill stand out.

[@roywilkie9577]

You have to take the clear film off of the sheet first before you push out the cut section! It even says so in the instructions. That's why it ripped.

[@james10739]

I was thinking about doing my moms car and I figured I'd start with a rear window and do the driver last with more experience

[@JesseOsby]

Should've sprayed it with water before the coating, too. I bet it would've sheeted just the same (since it was new paint).

[@cam0manx]

you can get a full car tinted professionally around here for $110-130. Not worth messing with the pre-cut stuff.

[@EnAimBoy]

You can get an endoscope (tiny camera on end of a wire)on Amazon or eBay, that has saved me a lot of trouble with working on the car and house.

[@EnAimBoy]

but i guess you got the wire without it.

[@Im1CrazyCow]

Hey Sam a few things on tint, first off if you really want to do it your self just go buy it from one of the Autoparts stores, it comes in depths of tint.. or percentage of tint .its what they check when they pull you over to see if its too dark ..Anyway I have done my Car , Truck which has been on your property before when I delivered HAY to your Dad ....But as I was getting to i did it on my old house too but that I bought at Home Depot ( its different tint than at Auto parts store ) BUT you still use the same method to install it......stop using them Bondo spreaders and get your self a good 6 -8 inch RUBBER Squeegee and a 10-12 inch one of you plan top do your house....The Squeegee will have a Metal Base on it that can be taken apart to replace the Rubber if need be or shift it for weird corners. OK to install it first off never try to line it up and Always CUT IT BIGGER you will trim it with a single edge razor blade or a break off blade style cutter. NEVER USE HEAT GUN!! to get it behind the window sweeper (felt) on the door panel you can do it 2 ways one (and this is why you cut it bigger) after you cut your piece and you get ready to remove the clear backing on the film you roll the window down about 3 inches and then you can either slip the film behind the sweeper by just wetting it and slipping it but i like to un pop the panel just on the top it makes it alot easier and then slip it down far enough to were it goes well below the window if you rolled it up all the way. Make sure as you are doing this you keep the top sprayed or wet against the window this allows you to move it in any direction easy.......OK here is where the magic comes in with the Squeegee start in the center and work your way to one side ONLY i normally do the hardest ..in your case that odd part at front dont worry if it is a big big and comes up ( really hard to explain this on here) anyway you do that and then you use tool to take the solution out at the bottom all the way to the end of window so now it looks like the front is done mostly and the end where it would the key in the door is,. turn your tool around and use it to remove all the solution all the way out to the top until the film is more or less looks like its been done by a pro ( this is HOW YOU GET NO FINGERS...the solution and lift and squeegee over and over till it sets right) at first it seems hard by the 3rd you will go at it like you been doing it for years.......ok the final and the part that makes it look like its been done by a shop........TRIMMING you want to cut the top first and this is IMPORTANT...CUT IT 1/8- 1/4 short all the way across the top following the top edge of window... THE REASON: when you roll it up its unseen because of window rubber.....now why you do it: so it wont roll back or get pinched off in un-stick cut the sides about 1/8 same way not as important you just need to make sure its even ....its very easy........ok here is why you left the bottom long and DID NOT DO THE DUMB CREDIT CARD SHIT......now take you single edge or break away cutter and roll window all way up for now pull back on bottom window sweeper/felt and CUT ABOUT 1/2 an inch below it and use squeegee to push it down flush to window........ now after thats been cut all the waay around your done ...ALMOST.......ONE step left is to ROLL DOWN any of the windows you had to Roll up so if 2 or 4 door roll them all down about 2 inches

[@merlinsk1]

I always take the inner door panels off when doing precut tint. Using hard plastic bondo spreaders not good. Rubber edge squeegee is the best

[@stanleyrucci21]

I think you should blackout the blue behind the grill, top of the bumper cover and I am shocked that Maaco didn't paint your calipers blue for you, along with the rotors!

[@DFisk75]

Where did you get a pumpkin from in april? Do they grow all year round in Florida?

[@kksquad69]

Hey Samcrac, the reason for the fingers is because the tint is flat and the window is curved. Take a heat gun and heat the fingers and the will start looking like a snake and you can flatten them out with your hard card. I usually do that on the outside before installing. If you ever need help I can walk you through the process and tricks such as how to carry the tint.

[@Nate2826-]

Yeah Sam I tried tinting the windows on my truck myself and spent as much as having a professional do it, I ended up getting mad at my own tint job and ripped it all off and having a pro do it and been happier with that job than my own.

[@trubin5619]

Amazing, water just splashes off your car when it’s ceramic coated? Like the car doesn’t absorb the water? Amazing!!

[@JonProce]

Should paint the area behind the grill black. Looks a bit cheap seeing the blue through it. I think the grill bezel itself should be a contrasting colour as well, maybe the same as the wheels.

[@MrTimdtoolman1]

the red on the back calipers would look better than silver at least now that you have painted the front ones red. I would recommend blacking out the bumper behind the grille as well. I think you were fighting a loosing battle doing the tint outside with the wind blowing.

[@boerharms2209]

The armor shield, its sorta kinda like the real life equivalent of KITTs molecular bonded shell, right?

[@Ryan-re7oj]

Car is looking great, not a fan of the color but that's on me. :D I did my truck side windows for the extended cab but man what a pain. So I decided to go to Speedy for my Forester. It was $300 and there was issues but it came with a lifetime warranty and they fixed the problems ASAP.

[@martyjackson4806]

Thanks for the code! I've wanted to try a ceramic coat and at that price... It's on it's way.

[@martyjackson4806]

I forgot to mention.... Free Shipping to Canada! I saved enough for Pizza. Not Dominos....

[@martyjackson4806]

Avalon King you guys rock! Customer service #1! Domonos could really learn from you guys.

[@connoisseurofcannabiscarsp3755]

Hey Sam..I love the FRB PAINT!! I was a Sales Rep for Spies Hecker when I went back to England for 18 months and when I left to go back to the states a few years ago,My uncle GIFTED me hiS RHD 1 of 6 U.K. Spec 1989 930 Turbo Which was THE AWFUL Guards Red and I hate red cars!!! I had a Job as a Rep for HOK & Glasurit in London which worked out great..The car only had 8,109 miles on it when it arrived on a 747.. My mum has been an Executive for adelta for over 34 years and KLM flew it over....Being innthe business I had Park Place strip and Media blast the entire car ro only a shell and in fact painted""French Racing BLUE" IN House of Kolors. I also have a 1988 which SharkWerks did some major upgrades to and I had it sprayed HOK GOLD BASE KANDY COBALT BLUE METALLIC WHICH I GET NONSTOP QUESTIONS ABOUT..ITS SO BAD ASS. IF YOUR EMAIL IS ON HERE IM GOING TO SEND YOU YOU A FEW PICS!! I have a 2015 RADICAL RXC TT 500 WHICH I USE TO RACE PIKES PEAK IHCOA which is also FRB!! IM SO GLAD YOURE A FAN!!! KEEP UPMTHE GREAT CONTENT ANDCIF YOU NEED PAINT,I CAN GET YOU WHATEVER YOU NEED MAN.C...

[@icemizul]

Nice video as usual. The silver calipers will be way better! The red unnecessarily takes away from the already highlighted blue paint. The wheels alone are a nice look; the red would even take away from that seeing how nothing else on the car is red (and lenses don’t count)...

[@dave1the1deer1hunter]

Can that grab tool be used to remove tracking devices from peoples noses?

[@danielscott6787]

Should have spent the extra money having the door jambs/ under hood, decklid painted blue too. Still I say you should go "Full Ricer" and put matching dual front fender stripes.

[@pb7870]

I actually love the bright colour now, especially with the grey wheels

[@danb.3397]

Sam, paint the bumper ( the blue part ) behind the grille the same color as the wheels, it will look deeper and more solid instead of having that annoying blue showing thru.

[@Kay-ki7qs]

I would go with red calipers and please get rid of the paint over spray on the tires before my OCD goes into overdrive!

[@turboboostintsi]

Those jags are interesting to tint lol that back window is fun but can be done in one piece.

[@wccborn]

You should paint the blue area behind the grille black, it'd look a lot cleaner if you ask me.

[@TXDIRT67]

I would go with blue on the calipers to give it a little pop, but not red.

[@BradKwfc]

I had success with my eBay tint installation, had a friend who used to do tint help me....Problem is, after a year in the sun it turned purple.

[@MrBillrookard]

Supercharged Jag w/ Nitrous? Red calipers for sure. And as for the tint? Remove the interior door panels really quick, that way you can get around the interior window seal and getting into it.

[@MoneyManHolmes]

I was thinking about doing that, but at that point there are only two more fasteners to just take the whole glass out so why not? I’ll see how it works out.

[@garyb4196]

From what I've watched,with fingers in your tint heat the glass on the outside for 3 seconds then squeegee the inside to get rid of fingers.repeat until fingers have gone. Do the same for air bubbles too!!👍

[@FrenchmanontheRooftop]

Very Nice. Your really getting the getto look down

[@markdean947]

Ok so im looking at cheap paint job for my truck and i wanna know how that stuff is gonna hold up to mud and dirt

[@groermaik]

I'd like to see the blue area under the grey front screen to be painted grey. It would look five miles deep instead of like a snaptite model.

[@yermailmain206]

Silver or black for the calipers would look nice in my opinion.

[@hippiechic9692]

This car brings back all the nightmares my 2003 Jaguar x type gave me 😂

[@adamsdailydriveway]

Paint behind the grill black, think it’s the core support for the bumper.

[@TheTorkerman]

Dude, what a trainwreck, i would be far too proud to release this to the public Sam 😂😂😂

[@scottcol23]

Love you Mr Crack... But if you take off or at least remove the top portion of the door panel it makes tucking the tint below the weather stripping way way easier. Your welcome.

[@miguelnunez6038]

Lol that same thing happened to me i bought cheap tint job for $60 and paid extra $30 for lifetime warranty only for the tint to turn purple after 3 years and go back to the shop and find out is now a title loan company 😢

[@democraciacientodoce3169]

We want more progress on this great 400bhp car!!! Try the smaller pulley, then upgrading to a twin screw charger... there are so many things that you can do with this car!

[@xxxp4ndaxxx]

I think the red calipers clash with the blue i think it would maybe look better white or grey😀

[@brianholwerda3848]

Try lexen tint off Amazon. 17 bucks for both front windows. Works great!

[@iiBaconx]

Hey Sam put the pieces of tint on the outside of the windows if there are fingers like that and use heat to shrink them out. You'll see the fingers kind of collapsing on themselves making a snake looking pattern. If it starts to tighten up into a crease shrink it on an x axis rather than a y axis. You can also. Shrink while the film is on the window but ofc you have a better chance of melting rubber and the film itself

[@iiBaconx]

Make sure the liner side is facing out!!

[@samcurmudgeon]

Silver calipers in front. Think about painting blue areas behjnd the grill black