How Does a Case O Matic Transmission Work? Plus a Farmall 706 Hi-Clear!

Рет қаралды 14,296

Күн бұрын

Пікірлер: 36

@davidkimmel5153 Ай бұрын

Dad and I had 4 tractors with Case-O-Matic drive. Never had transmission problems. Great loader tractor. I really had wonderful luck with them.

@dcw1540 Ай бұрын

Love your tractors 😊

@tmonteIH Ай бұрын

Thanks 👍

@shroglodyte Ай бұрын

I spent my teens driving that exact tractor, except in diesel. Never knew how the Case O Matic worked. I don't think the lockup lever had ever been unlocked. In fact, I had no idea what it did.

@tmonteIH Ай бұрын

I doubt you’re the only one with these experiences

@carlpreston1680 Ай бұрын

Correct me if I'm wrong but I think the 730 case matic we had when you let off the declutch it automatically was in slip mode then when you got going you flip the lever up to lock I think there was a mechanism in there when you stepped on the clutch It pushed the lever down to slip mode but I could be wrong it's been years

@larryklostermann5779 Ай бұрын

Nice tractors

@tmonteIH Ай бұрын

Thanks.

@tractor-mike-from-strassfarms Ай бұрын

Great video!!!!!!!

@tmonteIH Ай бұрын

Thanks Mike. Really glad the 800 is going to you. It's such a great little tractor.

@harvestingharrolds1086 Ай бұрын

My father in law has an early round fender 930 diesel standard. Unusual tractor for Northern Indiana.

@tmonteIH Ай бұрын

Definitely. Not really a row crop.

@donvoll2580 Ай бұрын

Good day from Ont. A few yrs ago big forklift went up highway until it got to steep hill almost at a crawl They r all right new, but do wear out Ths

@tmonteIH Ай бұрын

Everything wears out.

@carlpreston1680 Ай бұрын

Yep starts like a 706 The two of them we have don't have torque amplifiers either . those case tractors in those years pulled way above their horsepower rating and if you looked in there operator manuals they had more options than you could believe as far as configurations go transmissions , tractor , styles over center hand clutch, foot operated standard clutch, case o matic . We had a 730 case o matic row crop style wide front end with the eagle three-point hitch fully optioned tractor Max amount of Wait front and rear and liquid Ballast front and rear , with 15-5-38 rear tires and the factory matched three bottom rollover plow . One time the gauge wheel stop broke and the plow went all way in our hard AZ ground ground to the frame and a pulled the front end of the tractor 3 ft off the ground in a heartbeat and that's with having engine problems at the same time so those things punched way above their weight .

@tmonteIH Ай бұрын

Would agree. Just not the same in modern tractors.

@garygrose6351 Ай бұрын

Can still smell the propane, on start up. We had a 811b row crop, wide frontend. Used to to pull 2 14 foot jd single disk drills. In sand here on the red river. I rebuilt the tractor my senior year. Case o matic drives can be very temperamental, basically an direct drive, or over drive. The 800 is a great baleing tractor. The hydrlic pumps were weak. Especially on this one as it has power steering.

@garygrose6351 Ай бұрын

Forgot to say was from sw Oklahoma down on the red river! Best peice machinery you can find, all the zerts will work, and its been in a shed. Love your channel. Your in a great area up there.

@tmonteIH Ай бұрын

Thanks for watching. Love the memories. Lots more fun finds to come.

@simonworman7898 Ай бұрын

How did a country that was engaged in the space race knock out a behind the times machine such as this.Gaszoline and propane " Quaint as the Dickens" . Of course the U.S.S.R was out there in space at the same time and their agricultural kit lacked up to date features.The UK at this time did not space race but we provided modern up to speed tractors for our farmers but of course we did not reach Saturn 5 type prarie machines!. Nice little tractor sounds like a T20 continental .

@deweydodo6691 Ай бұрын

They go into gear easy if you idle them down.

@tmonteIH Ай бұрын

Allegedly.

@Dennismelnychuk Ай бұрын

I never had the pleasure of driving 1 that wasn't all worn out it kept getting locked between 2 gears so we left it in 2nd and just left the hand clutch in neutral.

@tmonteIH Ай бұрын

That’ll happen.

@1murder99 Ай бұрын

In 1980 I bought a small farm and needed a tractor. My internet was not working well that week so I had to drive all over Texas and Oklahoma to find one. I found a nice 830 diesel in Burkburnett, Texas. It needed a starter as there was not one on it. They wanted $1700 for it and I shopped around for a starter and the cheapest one I could find was $1700. I passed. Wound up getting a Moline M602 for $2000.