How good are Soviet watches?

[@VintageWatchServices]

Sadly a simple video about a Soviet watch has attracted Russian bots in the comment field. Take note that any pro-war comments will be removed.

[@toboldygo5823]

Stian two interesting videos on KZbin I’d like you to take a look at (The school of life) “Philosophy” Soren Kierkegaard & (The school of life) “History of ideas” The renaissance ✌🏻

[@Kithzer]

Полет 3133 самый обычный хронограф, правда это не ссср, а 90-е Россия. Poljot 3133 is the most common chronograph, although it is not the USSR, but the 90th Russia.

[@toboldygo5823]

@@Kithzer unfortunately I cannot read Russian I would like to know what this message says😎👍🏻✨

[@jonka1]

Copy and paste it into Google translate

[@julianpetkov8320]

Bulgarian here. "Slava Ukraini" is the war chant of the Junta. There is no such thing as a "non" pro-war side in the Ukraine civil war.

[@ronaldusmagnus714]

I'm 54, and just now realizing the absolute wonder of mechanical watches and their amazing complexity. Started watching a few watchmakers and I am never bored. You sir, are in my opinion not only a master and teach us so much, your humor is perfect. I enjoy the humor as much as the watchmaking. I don't know if anyone else would agree, you sound a little like Ray Romano... but you're way funnier! 🤣😂😎

[@VintageWatchServices]

My voice is nasal? 😳

[@ronaldusmagnus714]

@@VintageWatchServices Lil bit... lil bit. 😂🤣😘

[@ronaldusmagnus714]

@@VintageWatchServices Big fan of yours! I look forward to your videos, and are watching the older ones since I just recently found your videos. I hope your channel grows exponentially, you deserve and are obviously a master in your craft! God bless you and yours!

[@MichaelWilliams-mo1vv]

Ray Romano? Not getting that at all.

[@murraykriner9425]

I have a few Soviet Wristwatches that I rather prefer over many other brands. They are elegant, while remaining just a little understated, are very reliable, while still keeping good time. Have seen the Poliot watches for auction on E-Bay, but have found few that function and know there are few watch repair technician's here in Central Ohio. Thank you for an engaging video. My thanks.

[@VintageWatchServices]

Thanks so much, Murray! These are also getting more and more expensive, but their internals are not very complicated, so any decent watchmaker should be able to help you 👍

[@USAHaCkY]

Amazing to see how you found the problem on the bearing in the main plate for the barrel. Master class as always. Thanks again

[@VintageWatchServices]

Thanks so much! More to come today, so stay tuned :)

[@starfthegreat]

I also have a Soviet era Poljot Chronograph my Dad got as a gift back in the 80's, I got it serviced recently and I occasionally wear it.

[@VintageWatchServices]

Very cool!

[@zibbezabba2491]

I love how Russian watches have a unique look and feel. They have real character. Those hands look amazing.

[@joeskeptical4762]

*For what it’s worth, I think the design of the hands is not pretty BUT the paint-on blue color makes them FUGLY, yet supermodels exist who make some men drool, women I wouldn’t touch with an enemy’s hands, much less my own. Different tastes for different aches (& pains).*

[@zibbezabba2491]

@@joeskeptical4762 I like 'fugly'

[@VintageWatchServices]

They have character for sure! Not everyone's taste, but what is anyway 😉

[@jurivlk5433]

What is strange, they normally write "Made in CCCP" or "Made in Russia" on the dial and the equivalent in Russian on the back. Also the painted instead of heat-blued hands are indicating Chinese origin. On the other side, Soviet movements look more rough in general, the surface treatment is less shiny.

[@VintageWatchServices]

This might very well be a Franken, the dial and case might not be original to the movement. From what I know, the movement is from the late 80s but the dial seems newer and possibly Chinese according to other commenters.

[@mrmichaelnilov]

@@VintageWatchServices верно! Механизм это СССР, корпус - Китай)

[@UserUser-ww2nj]

@@VintageWatchServices Yes , it could easily be a franenstein watch , that would account for the part being broken and maybe that screw that you had to put a shoulder on might have been a wrong one used by whoever cobbled it together

[@christianbell4482]

I have a watch that says USSR, and it has a more traditional dial and is heavily gold plated. Looks very different from this watch.

[@telwood15]

I think you could make a successful comedy channel as well as a first rate watch one.

[@jwoodyr1]

Thank you very much for making and sharing another fantastic video, Stian! I always learn new skills/information and it's a real pleasure watching you work.

[@VintageWatchServices]

Thanks Woody, that's very nice to hear 😊

[@FinnoUgricMachining]

Thanks for sharing this. I am more into machining but Your presentation is just addictive ... I have owned a Lada. The model was 1200L and it was a very reliable car especially when it was cold. For extreme weather it had this hand crank for starting the motor by hand. When it was really cold, You just turned the motor over a few times with the crank before trying to start it. That made it little bit less stiff and it started as if it would be summer. With cold weather I mean temperatures -25C or less. That car had very stiff steering and most uncomfortable driver seat. In Finland we said: "Visit the gym before buying a Lada". Very few Ladas have survived because they had some corrosion problems and were usually scrapped because of their affordable prise.

[@VintageWatchServices]

Thanks so much! Ladas were indeed quite cool and I was in general very happy with mine. The only letdown was when the heating gave up in the middle of winter, but that was because of a faulty water pump. Relatively easy to fix and afterwards it worked just fine again!

[@100amps]

Another great video, Stian. The repair segments are particularly interesting and insightful. Takk.

[@VintageWatchServices]

Thanks so much :)

[@thedisabledwelshman9266]

@@VintageWatchServices lovely looking time peace

[@VintageWatchServices]

Thanks Michael!

[@thedisabledwelshman9266]

@@VintageWatchServices you are welcome

[@andrewpeterwhatsonmybench1383]

Yes you are correct . I too have had a snapped operating lever . Plus a ridding high yoke allowing the sliding pinion to jam on the intermediate wheel , stopping the movement. You are a good teacher

[@VintageWatchServices]

Thanks so much, Andrew! Did the operating lever snap on a 3133 or a Valjoux?

[@gromit1996]

When I first started collecting Russian watches I longed to have a Poljot 3133 in my collection. I got one, and then sold it and some other watches in order to buy a much nicer Omega. Then, a few years ago a good friend in Ukraine gave me a Aviator 3133 chronograph and another Buran came into my possession. The Aviator had something wrong with its case and so I found a different one and dial/hands to swap out. It worked fine. All this to say, I love the 3133 chronographs even though they aren't all that pretty and suffer from poor craftsmanship. Probably from folks who weren't exactly "watch makers" but knew how to follow directions to assemble them. Thanks for doing this one. It's pretty, and yet has its flaws, like most of my experiences in the former USSR.

[@VintageWatchServices]

The base 3133 design is very sound of course, based as it is on a Valjoux design, but the execution of it is indeed a bit rough around the edges (literally). The newer ones are apparently more refined though, so I suppose they improved :)

[@EdEd-k7q]

@@VintageWatchServices nothing time and care cant fix!

[@bottletree33]

I look forward to these videos. Very informative and the watches you choose are so nice. Great work again.

[@VintageWatchServices]

Thanks a lot, that's very cool to hear :) More to come!

[@Rog5446]

I love Poljot watches, I have a Poljot Strela Chronograph and it's gorgeous and keeps excellent time.

[@EdEd-k7q]

check out some of the 1МЧЗ alarm cals. very neat little mechanisms

[@amphibiousone7972]

I have a Soviet Era Vostoc Commander from the late 70's. It's all original and complete. It is basically new since it has been seldom worn. Since it is nearly 50 years old. I know it will need to be serviced very soon. (Just to clean) I love it, it's solid. I like the way Vostoc made the case back closure.

[@AndyHullMcPenguin]

Q: Why did the Lada have a heated rear windscreen? A: To keep your hands warm while you were pushing it.

[@VintageWatchServices]

😂

[@injunnfuz6698]

You are a genius in repairing watches back to life

[@johnny6171]

Great stories and dry humor! Thank you!

[@VintageWatchServices]

Glad you enjoyed it, Johnny! More to come today, so stay tuned :)

[@yru435]

I have that movement in a Poljot chrono. Your fine and informative video has convinced me that I will never open the caseback. Thanks.

[@OriginalAlessa]

Yes, I really like the dial too! That was my first thought! All in all it’s a pretty watch with even a heart shape inside. Thank you for sharing!

[@VintageWatchServices]

It's not bad looking! 👍

[@martinlouden9005]

What an absolute beauty of a watch Stian. And thanks for not embroiling yourself in politics. Far too many people think they are qualified to proffer their opinion. I'm more than happy with the bad jokes and occasional bursts of song!

[@SeekingTheLoveThatGodMeans7648]

Well, maybe Russia is going to find out what time it is.

[@VintageWatchServices]

Thanks so much, Martin! Yes, I don't want they comment section to turn agressive and unfriendly, after all watchmaking should be soothing 😊

[@yessanknow302]

@@VintageWatchServices Your sense of humour is great. I follow several watch repair channels, but have only just found your channel. Liked and subscribed.

[@jarmokankaanpaa6528]

Nice video! Just a couple of comments: Yuri Gagarin´s space flight was in 1961, not 1964. The Lada, of course, was not originally Russian/Soviet; it was based on the Italian Fiat 128 with some minor changes and was manufactured in the city of Tolyatti (formerly Stavropol), named after the Italian communist Palmiro Togliatti. In Finland, it was renown for starting reliably in the winter cold, which you might expect was rather important for a car built in a country mostly not warmed by the Gulf Stream (like Norway).

[@theGothicTopic]

Why are these videos so satisfying to me .. well done

[@VintageWatchServices]

I don't know, but great that you like them 😁

[@RyeOnHam]

Volume is spot-on! Thanks!

[@VintageWatchServices]

Great to hear, thanks!

[@scentdesigner1]

I have one Buran Flagman is 15 years old now. Still working great.

[@VintageWatchServices]

Very nice!

[@elund408]

Soviet watches are the things I am most impressed with from that era. You mentioned the LADA which had the reputation of being the best soviet car, I lived in England in the early 80s the cheapest motorcycle you could buy was soviet built, it had the reputation of destroying itself in a year. I had a roommate with a soviet camera it had a shutter release like a cheap shotgun. And in 1985 Soviet TVs exploding caused 5490 fires some fatal.

[@elund408]

@BumbleBee I don't remember the name just that it was big and was very loud when the shutter was pushed.

[@VintageWatchServices]

There's a certain charm to these kinds of products 😁

[@fogbow]

You gave me a few good chuckles, thanks. Nice work and good banter, that's a balm nowadays.

[@VintageWatchServices]

Glad you enjoyed it :)

[@RomanMelihhov]

I love watching you work...

[@docnele]

There's no way in USSR that watch would be sold in the western market without "Polet" logo and "Made in USSR" and letters in latin. Period. That is post-Soviet era watch, possibly from the early 2000's or even late 90's.

[@VintageWatchServices]

Thanks for that info! I have some suspicion the dial, case and movement might not be original to each other. From what I know, the markings on the movement and the materials used indicate a post-1983 but pre-1992 manufacturing date, but the dial indeed seems newer.

[@the-chillian]

Now I'm wishing I could find this Soviet-made pocket watch I bought in the mid to late 1980s. It stopped working in fairly short order, and now that I'm getting into watchmaking as a hobby it would be interesting to open it up to see what I could do with it. Mind you, if it has broken parts like this one did, I don't know where I'd source them.

[@VintageWatchServices]

That would be fun! I think you can register on Cousinsuk.com as a private citizen and there are for sure material houses in the US you can do that at also.

[@fredfarnackle5455]

Fascinating video, I couldn't take my eyes off it. The amount of tiny parts that go into a mechanical watch is amazing.

[@VintageWatchServices]

Thanks Fred! I'm planning to make a watch running through the logic of how it works.

[@samnova450]

Like the dial and large date. Read up on Telemeter, wasn’t sure what those numbers were on the dial. Good job on the watch. 🎉

[@michaellawrence6677]

That is huge. Great job, thanks.

[@seorsamaclately4294]

I have a Strela with the 3133. Nice to see the insides completely, and not only the visible parts through the display back.

[@VintageWatchServices]

Thanks for watching! It's certainly nice to see the movement through the display back but also cool to see all of it!

[@franka9760]

Quite a different look. I noticed that there were at least three "leftist" screws, perhaps to be expected on a Soviet watch. Great work, comrade!✊

[@VintageWatchServices]

Thanks Frank! Yes, they put in lots of leftist screws in this movement... Always a danger if less experienced people work on the watch or if they don't have party approved leftist tools :)

[@jamesrobert4106]

@@VintageWatchServices At least it doesn't have a mosaic dial 😆

[@VintageWatchServices]

@@jamesrobert4106 😁

[@davelowey3074]

Hi Stian, another excellent interesting and informative video, i quite like Russian movements i have 4 good ones a Raketa 2609 ha 2 poljot 2614.2 H that i got from ebay got one in a job lot both just needed a service and regulating now both are around +-3 s/d 36 mm in Seconda watches and another with a Slava 2427 that needed work cracked jewel and worn barrel bridge on the arbour close to the crown, i didn't have the tool's then so got a doner movement now runs like a top i did know to put into time setting to remove and replace stem Ranfft on google, had to have a sensitive touch to replace though, Russian movements for practice and learning great, thank you for sharing Stian. I hope to have a go at fixing a chronograph soon.

[@VintageWatchServices]

Thanks Dave! They are indeed excellent movements to learn on and generally quite solid although this one had more than it's share of problems... Go for the chronograph, you can do it! Take a lot of pictures and be very careful :)

[@boydsargeant7496]

Hi Dave, I’ve not serviced a Chronograph yet, it will come.

[@doogsm6013]

I think it has a certain understated elegance, and the the flip back is an interesting nod to the pocket watches of old. Your tweaks should make for a reasonably reliable timepiece considering the original quality control issues. All in all a good job and something I wouldn't be ashamed to own.

[@VintageWatchServices]

Thanks! It has a certain charm indeed and the dial is very nice :)

[@ydnartitcomb1]

We are also supposed to learn from our failures... thanks for sharing

[@VintageWatchServices]

Thanks for watching, Randy!

[@markirvin2809]

Another brilliant one. Keep 'em coming!

[@VintageWatchServices]

Thanks so much, Mark :)

[@ianmedium]

I have two versions of this movement. One, a Sturmanskie I bought at a Lions club flea market here in Austria. It was piled in a box of plastic watches. It was on its orginal Blue sharkskin strap and was pretty much as new. The lady said it needed a new battery (!) so she would sell it to me for €2! I can´t believe how quickly I paid, walked away, gave it a couple of winds and off it went! Wound it fully, pushed the chrono pushers and everything workd perfectly. Four years later the ruddy thing still works perfectly and keeps incredible time! The second I got for a bit more, €150 and is a Buran and has some fun added complications, It is a regulator and a 24 hour movement. Again, in NOS condition and again, 3 years later keeps perfect time. My pride and joy is an NOS Strella from 1972, Paid more for that but still, much less than what they go for as the chap selling it at the antiques fair thought it was just a regular watch! I have had Soviet watches since childhood. My first watch was a Timex but back in 1979 I was over the moon to receive for my birthday a new fangled quartz made by Sekonda. Never ever had issues with any of my Soviet watches, perhaps I am lucky! This one is beautiful.

[@VintageWatchServices]

Wow, that's some story! $2 is not a bad price at all 😂 These watches used to be really good value for money but they're getting more expensive now...

[@ianmedium]

@@VintageWatchServices oh yes, The Strela I got for €320 three years ago. Absolutely new old stock and that is a bargain compared to what they are going for now. These may not be the most beautiful movements and the cases are plated brass but still, if your lucky you can get into a mechanical Chronograph for not a lot of money. I really love the dial and officer case on this one!

[@TheRobertlonski]

Stian -- Another good video, my big PROBLEM with your videos is that you do not make enough of them.... Ha Ha. Ha, I totally understand how much work goes into these videos, your hard work is shown in the quality. Thank You for taking the time to make these videos. Bob

[@VintageWatchServices]

Thanks so much, Bob! I'll actually most likely will slow down the output rather than increase it, I'm afraid :) It takes me a full day just editing the video, so I'm considering going to a bi-weekly publishing schedule.

[@TheStig1961]

You make good watch restoration. By the Lada was a quite good car. Popular in the 1970-90 here in Finland. My daddy also has 3 of them. He (and I) was able to fix them. Regards from Stig Österberg from Dalsbruk in Finland.

[@VintageWatchServices]

Thanks Stig! I was actually quite happy with my Lada, it was probably the best value for money car I ever had :)

[@theoldbigmoose]

I like the dial. Very nice restoration with a few non obvious fixes.

[@VintageWatchServices]

Thank you very much!

[@rosemarymagrino772]

So relaxing! Thanks for the nap!

[@VintageWatchServices]

So it seems the bots are filling the commentary field?

[@tommyvictorbuch6960]

A beautiful watch! I wouldn't mind wearing it. Good job.

[@donnyboon2896]

Yay! My weekend treat! Tusen takk! 🇸🇯🇺🇸🇸🇯🇺🇸🇸🇯🇺🇸

[@VintageWatchServices]

Thanks so much, Donny 😁

[@decab8292]

A nice daily timepiece, dare I say better than new. Thanks.

[@VintageWatchServices]

Thanks so much! 😊

[@plainclotheshorse224]

The buzzer joke made me laugh out loud, Great skill and humour as always 😀 👍

[@VintageWatchServices]

Thanks! 😁

[@timstoffel4799]

Thanks for taking the time (all puns intended!) to explain the mechanical underpinnings of the chronograph mechanism and showing how it works. The question I have though is, why didn't the roughness around the barrel pivot hole in the baseplate cause the watch to run poorly earlier on in the life of the watch? Did this roughness develop over time, or do you think it was always there?

[@VintageWatchServices]

Hello Tim, I don't know how the watch ran earlier in its life, and unless the barrel was changed, the roughness would have been there to some degree for a long time. But these things indeed grow worse over time. As soon as there is somewhere that dirt and debris can gather, it will, and that will cause wear.

[@clivesouthafrica2086]

Always exciting to watch a real macho watchmaker swing Mjölnir. Nice watch, great dial, entertaining video. Thanks.

[@VintageWatchServices]

😂 Right you are!

[@richardaustinaustin1890]

Russian sailors working on the Morflot ships between Liverpool and north east America and Hull to Northern Europe bought nearly every Lada in the north of England for parts to sell back home. Legend has it that there is an undersea trail of stripped car bodies that were pushed overboard after all saleable parts were removed

[@VintageWatchServices]

Very funny! No smoke without fire 😉

[@rbmwiv]

Do you know what would be a good beginner chronograph movement to get to try my hand at them? I can do automatic day date builds is the most complicated movement I’ve ever done. Hopefully you will have an answer. Awesome video as usual.

[@VintageWatchServices]

Thanks for watching my videos! I'd say probably a Landeron 48 is a good beginner chronograph. It is a straight forward one and the easiest to come by at an affordable price of the traditional chronographs. The 7733/34 is also not too complicated and easy to find, but it does have a few more tricky parts.

[@frodriguezpc]

Another great job Stian! And useful for me since I have a small collection of these, and there's a couple things I can apply... Regarding quality, the specific movement you sre servicing here seems to be from 89 (change from 4 to 5 digit s/n) to 91 (when chrono bridge inscription changed), a time where things were going south in USSR, and quality control in Poljot was suffering. I find that early 80s pieces are better built. Also, the dial and case are most certainly either post-soviet era, or chinese imports. All in all, IMO a not-so desirable 3133, especially compared to the steel case military pieces.

[@frodriguezpc]

BTW can you share the mainspring replacement reference? I haven’t been unable to find anything in GR, and it is increasingly difficult to find NOS replacements. All the docs I found say it should be 1.60, and you used 1.70, has it caused any trouble?

[@VintageWatchServices]

Yes, this is indeed most likely a Chinese case, dial and hands. The metal in this movement is low quality. After this service a subscriber bought the watch and only after a few months the reset lever flag broke off in the exact same manner as the operating lever flag...

[@VintageWatchServices]

I used the mainspring list from watchguy.co.uk, it is in general very good. You will find it under Technical Information

[@frodriguezpc]

Thanks a lot, I will look in there.

[@dugwthree]

i am a newbie. to this. think i will start with a large pocket watch. i enjoy learning

[@VintageWatchServices]

Pocket watches are indeed great to start with, but make sure it is running before you start. Otherwise it might be very difficult to find out what the problem is!

[@AdlerGordon]

Always a pleasure to see Stian go all berserker with his mighty hammer! - I'm not a "serious" collector, but have a few pieces for the fun of it - amongst them, a Komandierskie and a Seagull 1963. Watches of this kind can have strange and murky provenance - Frankensteins not excluded. I do rather like the look of this particular watch, Stian, and wonder if you were able to narrow down the origin of this piece? As other commenters commented, there is some doubt as to it really being Soviet era, or even Russian at all? Also, the marking on the dial - "telemetre" is French, isn't it?

[@VintageWatchServices]

Thanks Gordon! I'm now entirely sure about this watch. Some commenters have suggested the dial and hands are Chinese, which could very well be. The movement is from what I have found from the late 80s and the case is consistent with that,, but it could be that the dial and case are more recent.

[@olavl8827]

@@VintageWatchServices I think that if these watches were made for export it would make sense they have markings in French, English or whatever. There might even have been different dials for different markets.

[@ronaldlinkenhoker5705]

I just wish I had your knowledge and skill. Very nice watch and restoration!

[@VintageWatchServices]

Thanks so much, Ronald 😊

[@wayneoneill5265]

I have a Poljot Sturmanskie watch, either 1970's or 80's. I'd love to get it serviced but I don't know any watchmakers in Dublin that actually know how to properly service a watch.

[@paulthebaker]

One of my favorite Soviet era quote’s goes like this, as long as they pretend to pay us we will pretend to work.

[@VintageWatchServices]

😂

[@brianpercival1829]

Used to work with a Russian dude, actually a nice guy. He would always say "Good enough for Government work."

[@Jack-gy7cs]

Fun video although I was slightly disappointed that you didn't put the minute hand back at EXACTLY 12 when reassembling.

[@VintageWatchServices]

Thanks Jack! If you check the video closely you'll see that the hands are perfectly aligned 😉 The reason I placed the minute hand slightly off was that the hour hand had moved slightly. It's a bit risky to do it this way, but with a bit of experience it can work :)

[@keithgarland3404]

Humour. Diagnosis, repair and restoration. Always good viewing.

[@VintageWatchServices]

Thanks for watching, Keith! 😊

[@gregcapella5941]

THANKS for another GREAT video !!!

[@VintageWatchServices]

Thanks a lot, Greg :)

[@covaiganesh7398]

Super watch sir

[@VintageWatchServices]

Thanks a lot, Covai!

[@charlesflint9048]

I have few Russian watches with 3133 movement and I love them all. I also have a 1950s Sturmanskie ‘Gagarin watch’ which has a really nice logo for the ‘First Moscow Watch Factory’ on the dial.

[@VintageWatchServices]

Sounds nice! A lot of these were very good value for the money.

[@phillipmaciver3226]

Another entertaining and informative piece of watchmanship, thank you...

[@VintageWatchServices]

Thanks a lot, Phillip 😁

[@admiralcraddock464]

my first watch was a Poljot Chronograph which i bought aged 16 back in 1969. I lost that after i stopped wearing it in favour of a LED one when they came out in the mid seventies. Sorely tempted to get another one as they often appear on eBay

[@VintageWatchServices]

LEDs were super cool back in the 70s and no one wanted a mechanical watch indeed :) These ones are generally good value for money!

[@admiralcraddock464]

@@VintageWatchServices the one I had had red Leds that only illuminated when I pressed a button on the case, a bit of a nuisance especially when I have had cover the watch with my hand in bright sunlight

[@VintageWatchServices]

@@admiralcraddock464 Very small price to pay for the über coolness, no? 😁

[@HeikosGarage]

great video. thanks for sharing your craftsmanship with us. Are you recoding this with voiceover or are you speaking while you are working? if you are speaking while working that would be very impressive. Greetings, Heiko

[@VintageWatchServices]

Hello Heiko, thanks so much! No, I do the voice-over afterwards. The audio quality wouldn't be good enough if speaking while working and my jokes would be even worse! 😁

[@ygrbooks]

Thanks again Stian for another lovely video on a really cool watch.

[@VintageWatchServices]

My pleasure!

[@samirshehata1221]

After greetings, let me ask about that fix drop, in Omega ,they use it with another name called Lubita.to prevent the lubricant from spreading. Is it the same under different name?another question, they put the parts after Lubita on a metal surface for 15 mnts. Under cover ,then we assemble it. An other remark, this Lubita also for lubricating the non reverse wheels

[@VintageWatchServices]

Hello Samir, thanks for watching! It sounds like you mean Lubeta, which is an ETA lubricant (lub eta), for reversing wheels (lubeta v105) and ball bearings (lubeta v106). You would use a similar bottle for soaking the parts and indeed let them air for 15 minutes, but these are lubricants, while fixodrop is an epilame. The purpose of an epilame is to prevent lubrication from creeping. It is thus used prior to lubrication.

[@toboldygo5823]

Hi Steum you could tell the parts are thin and stamped out that as long as it works 🤷🏻‍♂️

[@VintageWatchServices]

Yes, many of the parts are stamped out, that was part of the more industrial turn Valjoux did with the 7733 and of course to an even greater extent with the 7750. That made the manufacture much cheaper and easier for us to find spare parts even today :)

[@benfoust7424]

Thank you Stain for another superb video. Had a great chuckle about the Ass buzzer!!!!

[@VintageWatchServices]

Thanks Ben! 😁

[@Husker2Du]

What did you do about the broken part? Replace it?

[@VintageWatchServices]

Yes, I replaced it. Sorry that wasn't clear but repairing it would not be an option 👍

[@rosewoodsteel6656]

@@VintageWatchServices Did you ever find that broken off piece?

[@slapshot0074]

Very nice watch indeed and unique. Not likely to bump into someone else wearing the same thing!

[@VintageWatchServices]

Indeed!

[@russellvonastel7111]

Beautiful watch, going to see if i can find one

[@VintageWatchServices]

Thanks Russell! They have their charm :)

[@Watcheyes]

Nice view on oiling the pallet stone. Do you do this with a microscope? I try to do it in a microscope but sometimes I miss the middle of the pallet stone (the grease can be added a bit of centered on the stone) and it can "spread" a bit above the escape wheel teehts. Do you remove this "residue" if it happens or does it spread out after some time? Or maybe this isnt a problem? I try to put the smallest amount of grease on the pallet stone each time so I dont put to much, but hard to hit exactly in the middle of the stone. Well done as always, I learn a lot here, thank you!

[@VintageWatchServices]

Thanks a lot, Watcheyes! I think there are no better macro shots than yours on KZbin, tbh. What equipment do you use for that? I use a microscope for the pallets, yes. My eyes aren't good enough to do it with only a loupe. You want the oil to stay on the stone face, that's where epilame comes in handy. If the oil spreads over the edge you need to take the pallet out, clean it and reapply, otherwise the oil will creep more.

[@Watcheyes]

@@VintageWatchServices Your welcome. Wow I appreciate it a lot coming from you, thank you :). I use SonyA7s, sigma 70 mm macro. I see, yes I use microscope also, it can reach max 30x but I think I need 45x (this is also used for filming sometimes). Well its Okey now but sometimes my aim misses, so if I atleast hit the stone and not over the edge I guess it's okey then, thank you :), have a good evening!

[@avjaxon]

Heating in Lada is only needed to prevent the water in radiator from boiling in the summer!

[@VintageWatchServices]

😂

[@Joshualbm]

How did you resolve the broken tab on the pusher lever? Are some of the Valjoux specific parts interchangeable?

[@VintageWatchServices]

I replaced it with a VJ7733 lever. The levers are indeed interchangeable but not all parts are.

[@pipodorologio1648]

Interesting model...Having a few 3133's myself, I love the robust build....breaking the chronolever must require a lot of force, maybe dropped on the pusher?

[@VintageWatchServices]

Thanks Rich! Dropping it in pusher wouldn't break it, no. I think the problem was that the lever was completely stuck and someone pressed as hard they could on the pusher... But the broken piece was nowhere to be found, so it's all a bit strange...

[@elund408]

@@VintageWatchServices given its good condition it may have come from the factory that way and never been fixed. they just wore it as a watch until it died.

[@pipodorologio1648]

@@VintageWatchServices strange indeed but a great watch

[@Brodaty]

1:52 I'm not giving likes on YT videos often. Here's one.

[@VintageWatchServices]

That's very cool to hear, thanks! 👍

[@JimmysGarden]

A nice watch and a nice repair, Thank you 👍👍

[@VintageWatchServices]

Thank you!

[@ricky6019]

great job as usual!

[@VintageWatchServices]

Thanks Ricky!

[@artturiko]

nice watch

[@VintageWatchServices]

Thanks!

[@joeskeptical4762]

*Another great video, beautiful movement, fugly hands. GREAT JOB.*

[@VintageWatchServices]

Thanks so much, Joe!

[@CeesMaas]

Bravo, maestro!

[@mikewazowski6161]

I´m german and i love my Vostok Amphibia ! One of the best Watches i´ve bought in my Life !

[@VintageWatchServices]

The Amphibia is supposedly very good value for money indeed 👍How's Sully doing?

[@georgeliquor2931]

Very enjoyable thank you, nice looking watch, i want one

[@VintageWatchServices]

Thanks, George!

[@Bob.martens]

What does it say on the timegrapher?

[@VintageWatchServices]

There's a timegrapher readout in the video 😉

[@Bob.martens]

@@VintageWatchServices You may not know me, but you have answered every queston on watchmaking I ever asked in the comment sction with greater detail and with more integrity than anyone I know. Since my own watchmaking skills have taken off, no small thanks to your videos and your valued reliable replies , I must admit I no longer watch all your videos religiously from beginning to end. Thus I was looking for the traditional timegrapher readout at the end... my mistake. Sincere and high regards from Belgium.

[@dinoferrante1718]

Your dry joke delivery actually made me lol.

[@mlgboy1]

Did you do any more work on the chronograph operating lever after putting the shoulder on the screw because you can clearly see the screw unwinding itself when you operate the lever so I asume this would eventually wind itself out or did you increase the shoulder size?

[@VintageWatchServices]

Hello Mark, I'm not sure which clips I ended up using in the video, to be honest, as I had to make several adjustments and tried the screw many times, but ultimately the screw does stay tight.

[@de-bodgery]

I have a soviet mechanical watch...and of course it has never kept good time and stopped running a year after I got it! Probably something like you found in this watch is going on it is as well.

[@karlja3ger]

what kind of movement is in it? most of main soviet movements like vostok-2209 / raketa-2609 / poljot-2609 / slava-24** are pretty robust. yeah all of them except raketa-2609N have their flaws, but they are pretty easy maintainable.

[@de-bodgery]

@@karlja3ger No idea....never opened it up

[@slashdotism]

Hey that was a pretty cool one. A bit too funky for my taste with the whole pocket watch style case back though.

[@VintageWatchServices]

Thanks George! It's a bit off the beaten path for sure but cool enough within its own context :)

[@egutzait]

As a hobbyist, is there a technical reason you use angled tweezers or is it just preference?

[@VintageWatchServices]

Pretty much only preference :)

[@AnhBui-xz7mp]

They restored the 3133 and sell with almost 2000$, it's a crazy price. Now in in Moscow and i should say that you guys should buy watch equipped with Russian movement, better price of course, check the Strela with 31681, about 700$ you wont regret :)

[@VintageWatchServices]

Who sells a cal 3133 watch for $2000?

[@AnhBui-xz7mp]

@@VintageWatchServices IDK why my reply deleted, but you can check the "SHTURMANSKIE 3133/1981599 SKELETON", 2k8$ and a normal version is about 1k8$ on their website

[@jamessmith6402]

That’s a fabulous looking watch 👍 thanks good video

[@VintageWatchServices]

Thanks a lot, James!

[@REV4NS1]

It's not often that people can successfully combine comedy with informative content. One day you might achieve it. 😉👍

[@VintageWatchServices]

😂

[@paulmcb9070]

Ladas were brought down under - their rear window demisters gained a well-deserved reputation as excellent hand-warmers whilst pushing...

[@VintageWatchServices]

😂

[@tonyking9235]

YES PLEASE I LIKE A LOT .

[@johnsrabe]

So was the piece that broke off non-essential? I can’t find where you fixed it. (Only the screw shouldering.)

[@VintageWatchServices]

Sorry, it wasn't clear in the video, but I replaced the part. Repairing it isn't really an option, given that a replacement is about CHF 30.

[@red75v67]

But the Seiko Arnie doesn't even need winding! I have a soft spot for Vostoks. Just love the simplicity and charm of the Amphibia. This Poljot really is a brute of a chronograph. I might have to look out for one. Cheers, Howard

[@VintageWatchServices]

Thanks Howard! I really like Seikos but Soviet/Russian watches have a certain charm :)

[@hansslob6749]

Question, this is not an expensive watch as I understand. But the work you have to do is the same or maybe more then for far more expensive watches. What are the prices something like this sells for and what does it cost to do a service like you showed us today? Second question, could you make a video about all the tools you use. I’m not in watch repairs but have a hobby in repairing, restoring, old modeltrains and I’m always at the lookout for good, small, tools. So what do you use and where to get it? Hope this is possible!

[@VintageWatchServices]

Hello Hans, thanks for watching! This kind of watch typically sells for some 4-500 euros. A service costs some 250-300. I got this one very cheaply so I should be able to make a small profit, but I also wanted to do one for the channel. I'm probably going to take the channel into a bit less technnical direction rather than a more technical one. With the channel approaching 20000 subs, I'll soon be forced to be able to respond to all messages as it simply takes up too much time, so I probably will create a members only section where I can do the more technical things and respond to all questions etc. What's your thought of this?

[@hansslob6749]

@@VintageWatchServices well, as already said, I’m not into watches but I like the way you present this and the way the mechanics work. And yes, technical information, so people with the same interest can learn from you, to me is more important. That’s why I asked for a special on the tools you use, including that wonderful cleaning machine. If a separate group is better for your workflow, do so, it’s you channel. If it means the I have to become a patreon, don’t expect me to do so. The one thing I hate about especially KZbin is the fact that more and more channels ask their viewers to pay for information available on an earlier date, extra content etc. While the same viewers made these channels grow at first.

[@FitOutPost]

I've never seen this kind of Poljot before - the chronograph I mean. Interesting.

[@VintageWatchServices]

Thanks Ross! They've actually made a lot of them and they're quite cheap still...

[@FitOutPost]

Where did you get this one, if you don't mind me asking? Also - would you be so kind to reply to my email to you? Thanks.