If I have to clear brush here's how I do it. If you do it this way, PLEASE be careful. It can be dangerous and always wear safety stuff.
Пікірлер: 80
@ctcourtking5 жыл бұрын
Great stuff. Didn’t know this attachment existed. Agree on your points: chainsaw too heavy/too awkward for ground-level, Machete high effort, string wacker not enough punch. After 3 different landscapers blew me off, I’ll be using this to clear my property myself and saving a few hundred bucks. Thank you
@JADEDWILLIAM7 жыл бұрын
I cut and remove brush alot. 400mm airecut tri blade for your 240 and if you can an ms170 for for the larger stuff works very well for me. I 've got the saw blades too. They're busy gathering rust. I bang that tri cut blade into heavy brush all the time. Steel shaft on 240. Use it hard just don't abuse it.
@yongcastillo19934 ай бұрын
Great instruction, many thanks. Kinda hard to hear since you shot this during a tornado outbreak, but most of the audio came through.
@alcollins94507 жыл бұрын
The Stihl is great tool. The operator on the other hand is not a great tool. It is not a power axe. Cut through your brush and allow the tool to do the work as its its designed. As a previously posted commented mentioned, this misuse is destined to cause failure. And for your own sake put on some PPE before your hurt yourself.
@RAMPHD5 жыл бұрын
Over the head?! Start with the Chain saw for chest-high cutting, then the Brushcutter, I used the Echo Brush blade on my ECHO 210, using the adapter kit, includes a harness. They can get heavy after a while.
@corny1554 жыл бұрын
He’s using the fs240 it’s a mid/high range commercial trimmer. I believe this scratcher tooth attachment works for all pro trimmer by stihl. However stihl recommends handlebar versions. Also you should be using the anti-kickback block on the gearbox.
@harryschmidt65193 жыл бұрын
Purchase the bull horn handle for it if you can. Also the shoulder harness. Stihl dealer should have them and throttle cable also. I have the FS 90 with "bull horn" handle. Works well.
@drleo26414 жыл бұрын
Blade kicks off, hits you in the chest like Chinese throwing star. Game over
@R94GC6 ай бұрын
just posted a video to my KZbin page of a 1 ton excavator and a TMK 150 tree sheer. absolute beast!
@Gendo3s2k5 жыл бұрын
*Doesn't tell us what the attachment is* "Welp, I hope that helps!"
@jacquesblaque77286 жыл бұрын
First, put your $$ to better use, for saws, brushcutters, blades- avoid $tihl. Much better buys on machines from Husqy, Echo, Tanaka, and blades from Forester. Small brush like that can yank saw chain off the bar. Saw blades like that go dull before much cutting. For such small stuff, much better a 10-12" 3-knife blade. Bigger, go to 9" chainsaw-cutter blade or 10" carbide. (I do a lot of this work and value my time too.) Solid-steel shaft ONLY.
@JeromeBeeFarm6 жыл бұрын
People commenting on this video that he's doing it wrong don't have a clue or have never ran a brush cutter. That's a commercial grade cutter he has and it's made to work like that. That's why they sell the blade for it. I've cut miles of motorcycle trails through thick woods using Stihl and Tanaka cutters with saw blades just like this, and that's the way you do it. If you hold the blade against the wood, it just smokes and won't cut. The tool doesn't do the work, you have to swing it. Do this with a weed eater and it will break. One of these critics below also commented on my video using a Tanaka with a saw blade.
@mihkus7 жыл бұрын
Not trying to say youre doing it wrong but. Full face mask and goggles is a must. Sounds like your shaft is about to break in half, Your trimmer is not actually made for such stuff, learned it the hard way. Either your clutch or shaft is going to fail soon. Just sharpen your blade or get tc blade and cut bigger stuff a little slower
@natthecat20043 жыл бұрын
I didn't even know this was an option. I was either going to take a week off of work to clear by hand, buy an expensive brush mower, or spend thousands and hire someone to come clear my yard. Plus this kinda looks fun. Thanks for the info!
@survivethat20128 жыл бұрын
thanks for the info, and link.
@1PITIFULDUDE6 жыл бұрын
Keep the throttle pegged when cutting with a blade, just like you would a chain saw.
@legacyfarmerseachoneteacho51213 жыл бұрын
I put a blade like that on my weed eater and the head is leaking some kind of oil and blade moves a small amount. Is this something I can fix do you know or do I have to get the bolt on the head replaced?
@hansknutson23273 жыл бұрын
Tramontina cane cutters With extended handle Works better than machete. You have to make your own handle
@zzQUEzz8 жыл бұрын
great topic to bring up. I have a few acres of brush that looks thicker than what you have but the ground cover is heavy thorn vines. Would you go about it the same way? I have tried with a Gator blade on my weed eater but it takes all day to do a smallb patch and still gets tangled. I'm trying to avoid using heavy machinery that will tear up huge trees I want to keep.
@redneckwannabe11328 жыл бұрын
+Cameron Hi Cameron. I used it a couple of years ago where my chicken coop is now. It was 3-5 diam oaks, lots of thorny vine and poison ivy. It took me about an hour to cut it all up. Roughly a 20x30ft area. Took just as much time to haul off than it did to cut it down. I've seen videos on youtube of something like a bobcat but with what looks like a drum blade that does things alot quicker and really good but I don't want to use heavy equipment because of the cost and a few trees I want to keep as well. I'm sold on this weedeater blade. Here's a link kzbin.info/www/bejne/eHOklpR7nruJqrs
@zacjohnson84046 жыл бұрын
lol the smash it into the ground after he's done looks brand new too, probably just likes to play with toys
@NoName-qj2bi7 жыл бұрын
nothing says I love my strimmer more than tombstoning it into the ground after I'm done
@htg9896 жыл бұрын
That's because you dont have a name.
@ANXIETOR7 жыл бұрын
You kinda chopped at the brush with your weedeater blade. Is that the best technique for some reason? Can you sweep side to side like you're metal detecting? Are there bounce back issues? Good video.
@redneckwannabe11327 жыл бұрын
You do have to be careful of bounce back. The bigger the tree is over 1/2-3/4 the more likely you can have bounce back. Side to side works well also. Thanks
@nijalingappar88086 жыл бұрын
useful what is the cost
@Response1667 жыл бұрын
Nicely done!
@karl285607 жыл бұрын
I use my battery powered pole saw!
@1ybdevas4 жыл бұрын
what brand? -jdr
@tonybone1326 жыл бұрын
I just added that blade to mine earlier today
@GailRichards-l3s4 ай бұрын
Let the blade cut instead of chopping like you're swinging an axe.
@africanhistory2 жыл бұрын
I guess I should have learnt how to read lips.
@survivethat20128 жыл бұрын
Great video, I was wondering who made that blade and where can I get one? Thanks
@redneckwannabe11328 жыл бұрын
+survivethat2012 I got it at the local lawn mower dealer for $30. I use Stihl equipment and it was a Stihl blade as well. I would assume other manf would have something similar. The biggest diameter I cut with it was around 5 inches. www.stihlusa.com/products/trimmers-and-brushcutters/accessories/trimmer-heads-and-blades/circularscratch/
@markpowers3496 жыл бұрын
Thank you for the video, I would wear some gloves too.
@JWNLawnCare7 жыл бұрын
Ear protection?? cant get that back either ;D glad to see you at least wear glasses though
@brucemartini2288 Жыл бұрын
Im doing big project, lots of vines, especially a nasty type, laden with Thorns! The vines snag on Everything 🤨😠
@oldfarmer90046 ай бұрын
Wear protective gear!
@smartyjonesen7 жыл бұрын
Let just whisper something to you- HEARING PROTECTION! Steel-toed boots AND blade guard. Your body is WAYYYY more expensive than that Stihl trimmer.
@waynelynch38623 жыл бұрын
I suggest never doing a demo when wind is blowing hard, if you plan on talking. No ear protection? Glad you had eye protection. I saw another video where the saw blade flung something off a guy's eyewear. Don't take the chance. Wear protection. Ps... Most all gas trimmers/brush-cutters are made for right handed people. For us lefties that want to rest the tool on left side of body, the hot exhaust will blow on your body.
@ThaylorHarmor7 жыл бұрын
What are those things you put over a mic so you don't have the wind make a that sound?
@dellaisaacs68597 ай бұрын
Man..turn on your wind buffer
@sigzor3026205 жыл бұрын
Goddamn, why did you slam down your trimmer like a shovel.?
@dallascline4146 жыл бұрын
Dude wheres the guard?? your going to ger hurt, you always come in from the left side and always wear face shield or good glasses and gloves..Jus sayin
@scottsmith9059 Жыл бұрын
where's your gloves dude?
@aidenjosiah93982 жыл бұрын
I have a question why is your name redneck wannabe. Also great vid
@aidannina4947 жыл бұрын
You really should have a guard on your trimmer
@tammyhall46335 жыл бұрын
Real women too!
@robpotter13555 жыл бұрын
That “D” shaped handle thing sure gets in the way of where you need to hold it! 🤪🤪
@nafnaf05 жыл бұрын
you can move it or take it off entirely
@337365 жыл бұрын
What model trimmer are you using?
@sol_records2 жыл бұрын
am i deaf or is it just windy
@PLAYDEALS3 жыл бұрын
Foam on microphone next time please
@sjr78224 жыл бұрын
Got the weedwhacker blade from where, is that blade a skill saw blade, search " "How to turn your weedeater into a tree eater!"
@donovanroberts90635 жыл бұрын
He did squat
@nigelbaldwin7525 жыл бұрын
That is not the way to clear brush, nor to be safe. Handlebar type brushcutter with harness and suitable blade / guard whilst wearing all the safety gear with up and down motion is only safe and effective way, the advice on this video is plain wrong !
@antmydude2366 жыл бұрын
Wtf? Why are you swinging it like a baseball bat dude? Lol! Do you cut like that with a chainsaw too? You don’t operate it the same way as a machete. 😂
@hypnosiscenternyc5 жыл бұрын
Thanks.. can I borrow your weedwhacker :)
@elliottjones83543 жыл бұрын
W
@cardinalforlife11434 жыл бұрын
I have a tractor
@benjaminclingaman7551 Жыл бұрын
No hard hat
@xshanghu4 жыл бұрын
What!
@2nd-place5 жыл бұрын
For the love of God at least use a guard man!
@risunokairu4 жыл бұрын
He uses a shin guard. When the blade fails, he will catch the shrapnel with his shins.
@charleslane27357 жыл бұрын
no their not expensive their only $200.00 anyone could afford that!!!!
@cameronnalley31976 жыл бұрын
charles Lane27 ummm no. Nice try tho lol. A little stihl fs56 is already 220
@MadMetalShop6 жыл бұрын
Just got a fs 91r last week. 375 out the door. Not too bad I feel for "commercial grade". Its a quality tool.