Tap to unmute

How I Designed an Acorns 2x2 in Fusion 360

  Рет қаралды 65,594

RedKB

RedKB

Күн бұрын

Пікірлер: 192
@jeejee8280
@jeejee8280 6 жыл бұрын
How to get a raise 101
@frazlecubing6188
@frazlecubing6188 5 жыл бұрын
Jee Jee can’t like because it’s at 101 likes
@lt.turtle3268
@lt.turtle3268 5 жыл бұрын
It’s at 102 now
@frazlecubing6188
@frazlecubing6188 5 жыл бұрын
Darn u people
@jakeadams767
@jakeadams767 5 жыл бұрын
What happened why don’t you upload?
@kstringer24
@kstringer24 6 жыл бұрын
My suggestion for next would be to redo the Acorns 2x2, but as an actual 3D acorn, not flat.
@DaihatsuCharade1993
@DaihatsuCharade1993 6 жыл бұрын
Use the revolve tool on half the logo without the stem
@Nabikko
@Nabikko 5 жыл бұрын
Rip redKB’s channel
@amirmattarmani5130
@amirmattarmani5130 5 жыл бұрын
ikr he lost subbs
@chunky-_-toe6419
@chunky-_-toe6419 5 жыл бұрын
Bro where are you :( we miss you
@RBMCubing
@RBMCubing 5 жыл бұрын
Luis Medina bro he was the one who got me into cubing
@chunky-_-toe6419
@chunky-_-toe6419 5 жыл бұрын
Me too
@hasanalsaegh4972
@hasanalsaegh4972 5 жыл бұрын
😓😭😭😭
@Draverr
@Draverr 5 жыл бұрын
Videos every weekend 🧐
@kuangzhizhou6507
@kuangzhizhou6507 5 жыл бұрын
can you make a new video?
@boekster7108
@boekster7108 6 жыл бұрын
Wait...! I didn’t know you worked for acorns! That’s awesome!!!
@Inspirator_AG112
@Inspirator_AG112 5 жыл бұрын
I noticed that RedKB has been gone for 3 months.
@spicyguy4246
@spicyguy4246 5 жыл бұрын
Me too
@Inspirator_AG112
@Inspirator_AG112 5 жыл бұрын
Well, that has now turned into 4.
@NotBroihon
@NotBroihon 5 жыл бұрын
@@Inspirator_AG112 and nothing on any of his social media accounts. F
@EliteCubingAlliance
@EliteCubingAlliance 5 жыл бұрын
ANIMATION GUY 112 yep
@cubingthings2017
@cubingthings2017 5 жыл бұрын
@@NotBroihon i think he died
@MicahHidlebaugh
@MicahHidlebaugh 5 жыл бұрын
Where did you go! You cant leave us! No video in six months! I am dying!
@EricWohnig
@EricWohnig 6 жыл бұрын
As an Acorns user, I would love this! I also can't wait to get my Acorns card!
@bigblackkid1019
@bigblackkid1019 5 жыл бұрын
Where u been bro
@Onyxxyz
@Onyxxyz 6 жыл бұрын
you should make a video of the top 10 cubes a beginner cuber should own!
@Onyxxyz
@Onyxxyz 6 жыл бұрын
yay i got noticed!
@FoxSickness
@FoxSickness 6 жыл бұрын
I have been cubing for 3 years and it was you who encouraged me to start a huge collection of my own. Good job!!
@rociorana3579
@rociorana3579 5 жыл бұрын
Why wont you upload
@bigblackkid1019
@bigblackkid1019 5 жыл бұрын
Why you no upload
@gbilo24
@gbilo24 5 жыл бұрын
You should really do a tutorial about the Vladi's seed. I wasn't able to find a turorial in english and I can't solve it.
@Manqube
@Manqube 6 жыл бұрын
Hi, Have you made tutorial video for Burr Cube? If yes can you share link and if not can you make one? Thank you.
@rosebuster
@rosebuster 6 жыл бұрын
Nice. I have a panda-shaped and a tiger-shaped 2x2x2 cubes from Yuxin. They also look crazy when scrambled. But that's a very nice acorn. :)
@anventia
@anventia 5 жыл бұрын
Why did you print it all at once with supports? Why not top half flipped over as a seperate print? :/
@Fireworks_TV
@Fireworks_TV 5 жыл бұрын
Why is red so inactive lately?
@itsjustrj105
@itsjustrj105 5 жыл бұрын
Why is he not posting anymore
@trugie
@trugie 5 жыл бұрын
Its just RJ it's an oof
@ayeshaashraf1821
@ayeshaashraf1821 6 жыл бұрын
Kenneth you’re best at cubes
@ForeClover
@ForeClover 5 жыл бұрын
I love your vids!!! I watch them every day before I go to school. If you had a product on Kickstarter, I would totally back it.👍P.S. this looks like a Rubik's cube 🐱‍💻
@Chiggadestroyer
@Chiggadestroyer 6 жыл бұрын
What red chrome cube (4th from the right side) is it?
@cubingthings2017
@cubingthings2017 6 жыл бұрын
Good job and great work
@ev_dyno743
@ev_dyno743 6 жыл бұрын
First you can turn the png/jpg file into a svg using a file conversion then you can directly extrude without tracing the image. But in futon you have to select import svg. Secondly you can print the pieces on there backs so you don’t have to use as much plastic and it will save time
@ChrisBryantMusic
@ChrisBryantMusic 6 жыл бұрын
Awesome, I’m excited to see this in person!
@jfskewbing
@jfskewbing 6 жыл бұрын
How to solve the z bandage cube c ? It is more difficult than the regular bandage cube.
@thecubingshelf9331
@thecubingshelf9331 6 жыл бұрын
Hey! I have a question, what is the void cube? Is it a 3x3 shape mod or something else?
@LAmotionPics
@LAmotionPics 6 жыл бұрын
Congratulations on your first 3d printed custom made cube, looking forward to see your future 3d printed cube 😊
@Cube-sb9tp
@Cube-sb9tp 5 жыл бұрын
LAmotionPics he made a yoda
@jkthecuber4595
@jkthecuber4595 6 жыл бұрын
I love your 3d printing 'adventure'!!
@alaynesims919
@alaynesims919 5 жыл бұрын
Um... where are you? You haven't uploaded in 5 MONTHS!
@jonathanluhmann1090
@jonathanluhmann1090 6 жыл бұрын
Love your videos!! Keep up the good work!
@rosserobertolli
@rosserobertolli 6 жыл бұрын
Why didn't you print it upside down without support? Then you only need a small chamfer on top of the small ridge that hides the cube in order to print it
@redkb
@redkb 6 жыл бұрын
I thought about that but my bottom layer doesn't usually come out as nice as my top layer. And that was the most important layer to look nice.
@rosserobertolli
@rosserobertolli 6 жыл бұрын
@@redkb Ooh, that's a bummer! Maybe have a look at those matte magnetic build surfaces, they leave a pretty nice bottom layer finish. Furthermore they are flatter than tape and you can spray them with 3D lac for a more consistent adhesion without worrying that you might not get your print off
@ritvikprakash5758
@ritvikprakash5758 6 жыл бұрын
Your videos are amazing!
@JoseAntonioRoviraPuig
@JoseAntonioRoviraPuig 6 жыл бұрын
Hi Kenneth, I want to introduce my 3 yo daughter in the world of cubes, what do you think is the best first cube for her? I have some options, normal 3x3, z cube sandwich 3x3, normal 2x2 and Rubik's junior bear 1x2x3
@eddiejusteddie
@eddiejusteddie 6 жыл бұрын
you're back!
@DepFromDiscord
@DepFromDiscord 6 жыл бұрын
whats so good about his back? lol XD
@thecubingshelf9331
@thecubingshelf9331 6 жыл бұрын
*you're
@kstringer24
@kstringer24 6 жыл бұрын
his back!
@eddiejusteddie
@eddiejusteddie 6 жыл бұрын
fixed
@doublercubing3181
@doublercubing3181 6 жыл бұрын
Well done
@eugenekrabs8903
@eugenekrabs8903 5 жыл бұрын
You should do a tutorial on how you solve the skewb xtreme
@pauykasia5920
@pauykasia5920 6 жыл бұрын
Me ha dado una idea! gracias!
@jayjaypaa
@jayjaypaa 6 жыл бұрын
you can do all the fillets in one go. even on multiple bodies. printing upside down would have been smarter, unless your build plate is leveled badly and it doesn`t look nice on the bottom. in extrusion you can choose symmetrical in the menu, but i think you used that on a later part already. great video and good to have you in the 3d printing community :)
@redkb
@redkb 6 жыл бұрын
I would have tried to do the fillets all at once but they were very hard to select. I was turning off the visibility of the other bodies so I could select them then I was doing all of one piece at a time. Any trick for that? For printing it was important that the outside of the puzzle looked best so that is why I had it print in that orientation. The blue tape would have left a prominent line.
@jayjaypaa
@jayjaypaa 6 жыл бұрын
If you hold the left mouse button you can select stuff through objects. I guess I would try to enter a very high number for the fillet temporarily so it's easier to select the other edges. Not the best workaround but it could work. Setting the select filter to edges only is also helpful. Edit: only have 1 body visible at a time, select it's edge, hide it , move to the next also looking straigt down at the intersection and left click drag ( so it does the orange square selection, dont know how to describe ). make the square as small as possible, zooming can help if there is a lot going on in that spot
@literallyme.realmp4
@literallyme.realmp4 5 жыл бұрын
why didnt u upload vids for 6 months....?
@tyleehumphrey
@tyleehumphrey 5 жыл бұрын
NeonFlames1Gaming he works for a company of course he can’t upload some times
@literallyme.realmp4
@literallyme.realmp4 5 жыл бұрын
@@tyleehumphrey bro but still like 6 MONTHS are big
@gamerfromukraine
@gamerfromukraine 6 жыл бұрын
Amazing work as always!!!
@sleonard-lu7bo
@sleonard-lu7bo 6 жыл бұрын
Is this an ad for your app?
@harry-kw7dj
@harry-kw7dj 5 жыл бұрын
did he leave again :(
@SuperDomKiki
@SuperDomKiki 6 жыл бұрын
Acorns swag goodies incoming :D
@zelpirk
@zelpirk 5 жыл бұрын
I wish luck and happiness to your family
@W3sson
@W3sson 5 жыл бұрын
Do You know cfop
@imagineexistance4538
@imagineexistance4538 5 жыл бұрын
Try the 4D cube online
@nathangunther2806
@nathangunther2806 5 жыл бұрын
The only think I want for my birthday is to see redkb in real life
@harry-kw7dj
@harry-kw7dj 5 жыл бұрын
new video soon?
@mews1xn1n3
@mews1xn1n3 5 жыл бұрын
Rip redkb
@brainleeiacsworld3339
@brainleeiacsworld3339 6 жыл бұрын
This is super cool!
@edgymemelord4205
@edgymemelord4205 5 жыл бұрын
Why not try solving a Braille Rubix cube while blindfolded
@kaneyt0
@kaneyt0 6 жыл бұрын
Please show us your 2019 puzzle collection.
@kaneyt0
@kaneyt0 6 жыл бұрын
Make it into a video like you did in March 2016.
@Gavo9649
@Gavo9649 6 жыл бұрын
With that hole in the center, did you shell that? Or what feature did you use?
@redkb
@redkb 6 жыл бұрын
I used combine and cut instead of join.
@Gavo9649
@Gavo9649 6 жыл бұрын
Oh cool thanks man! Good job as well 👍
@geniusvadim7858
@geniusvadim7858 5 жыл бұрын
Been waiting for a new upload for 3 months now 😢😢😢😭
@deathpixelgaming
@deathpixelgaming 6 жыл бұрын
Make one of these but modded for a 4x4
@raynguyen6195
@raynguyen6195 5 жыл бұрын
It has been 6 months...
@thecubingshelf9331
@thecubingshelf9331 6 жыл бұрын
That is very cool!
@qwertyuiop-cy5en
@qwertyuiop-cy5en 5 жыл бұрын
"Videos every weekend"
@adamhere289
@adamhere289 5 жыл бұрын
Did you quit KZbin or something
@SadKris
@SadKris 5 жыл бұрын
Miss you bud
@idkilham
@idkilham 5 жыл бұрын
ok what happened to Kenneth's channel....
@NotherinTheSecond
@NotherinTheSecond 6 жыл бұрын
Acorns looks cool
@Zyugo
@Zyugo 6 жыл бұрын
It's been a while to see you make something.
@FranklinSpicer
@FranklinSpicer 6 жыл бұрын
The Rubik's cubed logo
@sebastianbaker4756
@sebastianbaker4756 6 жыл бұрын
Hey red kB!! any tips for improving the speed of F2L. I love your channel so muck! Keep it up. And thanks if you responded
@dabbermanxd883
@dabbermanxd883 6 жыл бұрын
He doesn't use CFOP lol
@sebastianbaker4756
@sebastianbaker4756 6 жыл бұрын
Haha rip
@morganb900
@morganb900 6 жыл бұрын
Three words: Clear talk mastery
@grimaxemopher7308
@grimaxemopher7308 5 жыл бұрын
U should make the 0x0x0
@richardschwab224
@richardschwab224 5 жыл бұрын
close your eyes, there you go
@lukea4175
@lukea4175 5 жыл бұрын
I miss your videos.
@fruitcubers2686
@fruitcubers2686 5 жыл бұрын
where is he
@starrymaelle
@starrymaelle 5 жыл бұрын
Are you gone for good? :(
@Isaac-ws6wp
@Isaac-ws6wp 5 жыл бұрын
What happened
@ArasuNK60hz
@ArasuNK60hz 5 жыл бұрын
mi nombre tambien es kennet pero sin H
@Cozy07-
@Cozy07- 5 жыл бұрын
i just came from a vid in that he shows a touch rubiks cube (published 2009)
@davidrawr4628
@davidrawr4628 5 жыл бұрын
Hi oh yeah
@rsslayersr
@rsslayersr 6 жыл бұрын
should've been a 2x2x1 red! would be a bit more marketable :>
@redkb
@redkb 6 жыл бұрын
I was thinking about that but wanted it more challenging to solve.
@paulbeavin5620
@paulbeavin5620 5 жыл бұрын
Did Kenneth die
@beatdropnation5420
@beatdropnation5420 6 жыл бұрын
You should turn a grass minecraft block into a cube :D
@loquenovistedegutix5899
@loquenovistedegutix5899 6 жыл бұрын
Themaoisha te extraño
@adampauling82
@adampauling82 6 жыл бұрын
hi
@redkb
@redkb 6 жыл бұрын
Hi!
@Mutt_Buncher4
@Mutt_Buncher4 5 жыл бұрын
You should make a smash bros 2x2 cube
@vkoskiv
@vkoskiv 6 жыл бұрын
You should 3D print a rubik's cube that you can then put a rubik's cube inside to make a rubik's cube.
@SJM-do9dr
@SJM-do9dr 6 жыл бұрын
Where is the squirrel?
@FryGuy1013
@FryGuy1013 6 жыл бұрын
If you printed it upside down, there would have been much less support needed.
@rafberries5515
@rafberries5515 5 жыл бұрын
Was this an advertisement
@twistiicuber1055
@twistiicuber1055 6 жыл бұрын
Alvin and the chipmunks are jealous
@rociorana3579
@rociorana3579 5 жыл бұрын
Lmao
@gabeolson6726
@gabeolson6726 6 жыл бұрын
7:29 you alvin the chipmunk's voice
@rayman3521
@rayman3521 5 жыл бұрын
*Scrat wants to know your location*
@lucasmonasterio3039
@lucasmonasterio3039 6 жыл бұрын
Seen the commercial
@codieiv9805
@codieiv9805 6 жыл бұрын
🎵 Like Acorns grow into mighty oaks small amounts invested will grow your wealth. Acorns the microinvesting app that takes your spare change and grows it over time 🎵
@L_T34
@L_T34 5 жыл бұрын
What if this was sold to the smartest squirrels on earth
@cubingthings2017
@cubingthings2017 5 жыл бұрын
_______________
@Jerry-qf8oo
@Jerry-qf8oo 5 жыл бұрын
Stop rushing him to make videos, he literally said he has a job
@DavidMartinez-db7qr
@DavidMartinez-db7qr 6 жыл бұрын
Change your outro song please
@sumeethcm6754
@sumeethcm6754 6 жыл бұрын
20Th!!!!!! As always great video
@congress7914
@congress7914 6 жыл бұрын
Oh my God I have wanted for a month
@danksoceity3683
@danksoceity3683 5 жыл бұрын
IM AFRAID THAT THIS WOULD BE AN ABANDONED CHANNEL
They wanted 100 dollars. I 3D printed it for 9 cents.
13:27
Morley Kert
Рет қаралды 2,5 МЛН
How I Built A LEGO Treadmill That Moves In EVERY Direction
18:06
Banana Gear Studios
Рет қаралды 845 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
What is BAD Color Contrast?
0:52
Seso
Рет қаралды 4,3 М.
Nemesis - Trying to Solve a Latch Cube
11:49
RedKB
Рет қаралды 463 М.
I Built THE QUIETEST Keyboard to NOT GET FIRED!
15:50
Keybored
Рет қаралды 3,4 МЛН
This Kid Solves RUBIK'S CUBE In 5 Seconds..
15:33
Infinite
Рет қаралды 14 МЛН
it took him 1 second to solve..
8:03
Perplexify
Рет қаралды 7 МЛН
Top 10 Puzzles in My Collection - 2019
9:59
RedKB
Рет қаралды 86 М.
3D printed velcro is something you have to try
14:27
Teaching Tech
Рет қаралды 575 М.