How I Drill, Sand and Polish resin using a Dremel

I have made this video after several requests asking how I drill holes in resin to add hooks etc. I have also shown how easy it is to sand sharp edges and remove bubbles and blemishes from resin as well as using the polishing wheel. Once this is done it is easy to re-coat the piece with another clear coat of resin. This will then give you a nice smooth blemish free piece of work. Using the Dremel 4000, or a similar tool is very easy and ideal for the resin beginner. The drill and the sanding cuts through the resin like a hot knife through butter, so go gently with a light touch . Please ensure that anytime you are sanding, drilling or polishing resin that you have a suitable MASK on to prevent you from breathing in the fine resin particles, as these can be bad for your health and lungs. I hope that you find this video useful, please let me know in the comments for this video if you have any tips or tricks you would like to share for polishing drilling or sanding.
CHANNEL MEMBERSHIP is available to everyone. Membership comes with a lot of additional perks including members only live streams and a VIP Facebook group alongside, support for anyone at any level of their resin journey to benefit from, plus more. Check out the perks by clicking the JOIN button or the link below. There is no obligation when you click the JOIN button next to the subscribe button to get access to these perks: / @stevemcdonaldartsandc...
OR
If you would like to buy me a coffee or make a much-welcomed donation towards the cost of materials, you can through this link 😍 Every contribution is very much appreciated and allows me to keep making regular videos. www.paypal.com/paypalme/SMcDo...
Check out this video next:
Steve 😍
Although I often talk about health and safety in my videos, please make sure you do your own research and take the relevant precautions to ensure that you are protecting your health. I am not responsible for anyone using resin and not taking the correct safety precautions. Resin is a chemical and as such should be always treated with respect and the manufacturers safety advice taken.
Links for USA (only)
Jewelry Chain 33 feet: amzn.to/2XzN21c
Jumbo Craft Sticks: amzn.to/2yNVek9
Open backed bezels: amzn.to/2RwSdLF
Closed Back Bezels: amzn.to/3bdDEVn
Epoxy Resin: amzn.to/3eakqSe
Disposable Gloves: amzn.to/2K12KdK
Mica Powder: amzn.to/34r6kaL
Art Resin: amzn.to/2yKG5QD
Gold Acrylic Paint: amzn.to/34xYn3p
Resin Mixing Jugs: amzn.to/2V0ritN
Large Reusable Mixing Jugs: amzn.to/3aZRsTe
Micro Glitter: amzn.to/2XpslFn
Half mask filter: amzn.to/3c9BNkd
Blow torch: amzn.to/34sOhRr
Heat Gun: amzn.to/3b2szpN
Eye protection: amzn.to/2V1CCpN
Resin Moulds: amzn.to/2JYPDdi
coaster molds: amzn.to/2XEv2TN
Resin Pigment paste: amzn.to/3a21CRG
Alcohol Inks: amzn.to/2RpuTzx
Dremel 4000: amzn.to/2V07Ihc
Links For UK (only)
Dremel: amzn.to/2xCHcRY
MDF Boards: amzn.to/2USu7ff
Open Backed Bezles: = amzn.to/2UxZlt2
Closed backed bezels: = amzn.to/2JwpB0F
Jumbo lollipop sticks: = amzn.to/39x5UQP
Master Cast 1-2-1 epoxy resin (4kg) = amzn.to/340Ike8
Crystal Clear Bubble free epoxy resin: = amzn.to/39D0F26
Disposable gloves: = amzn.to/34dpd0R
Mica Powder: = amzn.to/3aDULzk
Art resin 946ml: = amzn.to/2Jtw0JV
Gold acrylic paint: = amzn.to/2R0OYvI
Reusable Resin mixing cups: = amzn.to/340DnCl
Reusable silicone mixing jugs: = amzn.to/39D15FI
Micro Glitter: = amzn.to/39v3fY0
Half mask filter: = amzn.to/2X09eS3
Blow torch:= amzn.to/2wShzfO
Heat Gun: = amzn.to/3aGG6Dy
Eye protection: = amzn.to/2UUmLYx
Resin Moulds: = amzn.to/2wILyXL
coaster molds: = amzn.to/3dJpsot
resin Pigment paste (great value and lasts ages): = amzn.to/2UARtqX
Alcohol Inks: = amzn.to/2UP0A6a

[@ZippedUpKitz]

OMG…. I can’t believe I didn’t think about gluing my finer grit sandpaper to the sanding drums! 🤦🏼‍♀️ thank you!

[@ZippedUpKitz]

I LOVE my Dremel… BEST TOOL I have ever bought… I have a gazillion attachments, accessories and bits for it… I’m a Dremel hoarder myself lol…

[@boopmybutthole3616]

Exactly what I was scrolling for. THANKS!

[@MaCheriMarie]

You are brilliant. I know you did this video some time ago but if you see this, you have helped me SO much and I really appreciate it! Best wishes from Canada. 🇵🇪 🙏💕😁

[@Jestunes]

I love that you use a light mist of water and then wiping it down after you work on a resin piece. I always learn something new whenever I watch your videos. Thanks for sharing...

[@jessie5205]

Thanks for this! I just bought a tool to sand my resin pieces and had no idea where to begin. This is really helpful :)

[@lnc-to4ku]

You truly give, and show us the best tips! Thank you! 😊

[@staciflanagan1379]

I am just so glad that I have found you. I am learning so much and I'm definitely going to add this to my list of supplies to get. Thank you so much😁

[@robjtko]

Thanks for your videos!! Hope your doing well with them. I have the exact setup you have with the Dremel. However I tried to polish one of my pieces with my Dremel and it didn’t turn out to well. I started with 80 grit on an electric sander and went all the way to 2000 grit. Anything over the 80 grit was sanded by hand of course. And I am very skilled at sanding as I use to fix vehicle dents. I have seen people go all the way up to 7000 grit paper on KZbin. I have just begun and haven’t yet learned just how high I need to go with the paper grit to get a glass finish. Anyway I went up to 2000 grit and then polished my piece with Turtle Wax. Not good enough. It was still foggy. I then used tooth paste and rubbed it by hand. It was a huge improvement. It seems as though tooth paste just might be one of the best things out there to put the finishing shine on your a-opoxy resin masterpiece. I did see a video that was talking about what polish to use for the final touch. If I understood it correctly you need a polish that has the abrasion properties of 10,000 grit. I have looked at a couple polishes, one being The Turtle Wax, but have yet to be successful in finding what you might call an abrasive grit rating. Thanks again for all your great videos and the fact that you actually read the comments. I learned quite a bit watching your videos and I hope that maybe my information helps you in some way and anyone else who reads this comment. Anyone feel free to ask what you will. I will gladly help if possible just like the good gentleman who made this video for us. GOD bless to everyone!!.. :))........

[@gatanegracreations]

I should have watched this before I ordered mine. Thankfully it hasn’t been used and I can upgrade. The extension would make more sense for someone like me with hand issues. Thanks Steve! ❤️

[@michellemybell6460]

You my friend have really helped me with picking out a correct kit and how to handle the residue❤️ you answered all my questions with my new art projects im going to work on. So Thank you! Stay safe

[@lorettahanks6163]

Again thanks for sharing. I am very cautious and I am always safe. I study products, compare, reviews and then buy. So for mother’s Day I got a dremel 4000 series. Love it.

[@archbud2334]

Very helpful, thank you Steve. I purchased a dremel 3000, I will use this to finish off some of my coasters and trays. Warmest wishes.

[@dulceteixeira9097]

Awesome tips, thank you. I have to say I love my Dremel got it 2 years ago for my egg art and it was the best thing I ever got with work vouchers. Wonderful to see that I am going to be using it again when I make some coasters 😊 ❤️🌹

[@dulceteixeira9097]

Steve McDonald Arts and Crafts don’t know how to share on here so will add a picture on your Facebook 😊

[@heathermaich8966]

I have learnt heaps! Thanks Steve

[@RuhaneChiisai]

I really appreciate this video. I did a resin project a while ago that's a suncatcher, and the resin shrank away from the edge, I've been trying to figure out how to fix it (without touching it) for months! Thank you so much! I'm'a try this tomorrow after work probably.

[@suesmith9202]

You are absolutely brilliant. I've learnt some much from your channel, I'm just pleased I found it. Thank you so much.

[@Sooz3112]

I bought the 3000 a few weeks ago. It's great quality. Thanks for sharing x

[@Sooz3112]

@@SteveMcDonaldArtsandCrafts I may buy the flexible hose, it'll be easier for intricate work x

[@Shaun49ers]

Great tips! Thank you!

[@lilian4755]

Thank you Steve!!

[@missyb.623]

Great video. Thanks. I love my dremel.

[@catskillz3281]

This didn't happen to be what I was looking for, but I have to say I did still learn a bit from your video and was amused by your pup and the toy squeak haha. Thank you for taking the time to upload!

[@catskillz3281]

@@SteveMcDonaldArtsandCrafts I'll give it a view! :)

[@donnamcdonald9]

Very helpful Steve, thank you for sharing. I acquired something similar to dremmel, now I can use it with confidence, knowing which bit is which. Xxx

[@donnamcdonald9]

Good thinking batman. Xxx

[@lauramature7388]

Thank you for sharing!!

[@nicoleclay8593]

Very useful ty! I’m new to resin and i love your channel. Learning a lot from you ❤️

[@lovice43]

Great video. Thanks 🙏🏾

[@G.G.8GG]

Great info. Thanks!

[@suevogt4826]

Thanks very much for this info, Steve! It is exactly what I needed!! :-D

[@nakitapayton181]

I love your videos. I'm new to doing resin projects

[@alon-pm8656]

Very Nice hello from Spain

[@caftorita]

Thank you!

[@bmk5529]

Interesting. Thanks!

[@Soifdesang9]

Thank you for all you do and teach! I have a Dremel with a flex shaft attachment and agree 1,000%....they are built like tanks. Mine must be 15-20 years old. i just hang up the motor by the attached loop and away I go!

[@naptimecreations]

Awesome, great tips. I learned a lot. Thanks for sharing. I like when you said it's like a hot knife through butter 😂😁👍

[@naptimecreations]

@@SteveMcDonaldArtsandCrafts 😁👍😁

[@emalynn7278]

Are you able to cut resin with an exacto knife?

[@Foulmouthedcrafts]

Going to buy a Dremel now! 😃

[@janawest7186]

I so appreciate your showing. Me HOW to use a Dremel! It comes with all the stuff and what do you do with it! Thank you!

[@ajnormandgroome]

I bought a really cheap imitation of Dremel. It was good to see if I liked it. And I totally agree - get one with a decent motor, one that will last

[@vesna9978]

ThankYou SoMuch

[@user-sv2wp5kg8o]

Hey Steve. Would you usually dome larger wall hanger piece’s? I made some Christmas items, Santa’s face etc… they are bumpy, and large. I’m hoping you will pass me a word, or make a video on how and what needs a dome and what you use.

[@marccamilleri2335]

I love my Dremel I’ve got the same stuff as you

[@wendymclean9765]

Lol I caught your end blooper that you missed. You said Dremel 400. Ya ya we all knew you meant the Dremel 4000. You're still awesome. 👍🏼

[@markduggan3451]

Great hints, have you got a link for the keyless chuck, the one I bought is too big.

[@Steve-dr7rr]

Do you do a video on cutting resin. I’m going to be starting resin busts and there’s always resin left on the bust in delicate areas and it will need cutting and sanding. Would you have any ideas cheers I’ve got a dremel 4000

[@shazcreations3229]

Which bit do you used from beginning...please full video using power tool for sand and polished

[@MistresofDreams]

What do you use to glue the finer grit paper on to the rougher bit?

[@cindyfinn4845]

Brilliant and very helpful tips Steve..:)

[@cindyfinn4845]

@@SteveMcDonaldArtsandCrafts You're welcome Steve , I want a Dremel but I got a cheap rotary tool that I use and Im still learning to use it but your tips will be handy to know. I would ask Santa but I have been on his naughty list for years lol

[@cindyfinn4845]

@@SteveMcDonaldArtsandCrafts Well I buy my own presents hehe and I have a versa tool that I use the different bits but I need to practice and I did use a drill bit in the ornament that was warped to start then used my woodburning tool to make opening .which Im learning to use.

[@cindyfinn4845]

@@SteveMcDonaldArtsandCrafts Awww thank you I try to be resourceful and im happy if it works and I am finishing up my baubles and the garland will be a future project the rotary tool saw bits just isnt doing the job but I saw a chop saw that wil cut the dowl rods and I will be making more I try each year to add more to the tree :)

[@cindyfinn4845]

@@SteveMcDonaldArtsandCrafts Oh Steve Harbor Freight and I think Micro-mark have mini ones oh yeah and a 3D printer is on my wish list and a 3D pen,ummm a Cricut and a laser cutter and I need more storage as well..lol well heck a bigger apt with dedicated craft room my Queendom awaits in my dreams lmao..

[@cindyfinn4845]

@@SteveMcDonaldArtsandCrafts I know that would be awesome we would have a blast creating awesome art and crafts. We would be revered artiste in the Queendom hehe... :)

[@mallorikerr4092]

Thank you for this video. I just got my dremel and the drill press station for the dremel. Now I will get the flex shaft attachment for it.

[@jennifermassey9051]

I did enjoy watching this one and I really needed the info. Thank you!

[@tonyajackson0960]

Does Dremel make the step up Diamond sanding pads? Or is that where the creams come in?

[@shazcreations3229]

Which process is best for easy in short time hand polished or power tool polish...please suggest me good tips 🙏🙏🙏

[@ruthsteapotdesigns]

love this thank you! Any chance you could do a video on tricky sanding ? I have a bracelet I made with resin and struggling to get a decent even sand with my little dremel tool almost could do with a concave sanding bit to help with the curved sides! lol

[@ruthsteapotdesigns]

@@SteveMcDonaldArtsandCrafts oooh look forward to it!

[@moogie3111]

I'm really really (really) looking forward to your sanding video. So glad I found your channel, I plan to give myself a Christmas present by binge-watching your videos!

[@CraftelotResinCo]

I have had the idea of attaching finer grits onto my dremel and large sander, as well. I tried it on the sander with no luck. It was too powerful and threw the attached paper right off. What glue do you use to attach to your dremel? So funny the things we come up with. Maybe we should partner up and manufacture some dremel bits for artists together. Lol! Thanks for the help. Love the channel.

[@beckyduffy3743]

That was a great video. I have a question regarding fixing spots where the resin didn't completely distribute in the pour -- like on the edges or around the little post in molds for jewelry. It leaves a small hole where resin should have been. Or on a corner, it isn't full. It is always at the base of the mold. If I sand it, it is going to change the shape. Don't know if you have a suggestion for it or not. But I LOVE your channel!!!

[@Ebonybones47]

He never replies

[@lauraandrews8072]

Can you just use a drop of uv resin in the eyelet hole to secure them in? Will cured uv resin hold? I can't seem to screw them in...so i drill a hole, coat the eyelet screw part and place it in the hole, holding it in place and hitting it with the uv lamp.

[@ConnieConnie824]

A toothbrush is Great for brushing away resin dust out of holes like that 😊👍🏻

[@lauraandrews8072]

Is there a dremel polishing piece that will polish out/shine up sanded resin...so it's the same kind of finished shine ?

[@quinnrosenblatt2333]

Where did you get this dremel? I bought one off amazon but it was cheap and doesn't work.

[@lisajarvis3820]

Question: with this same tool could you please tell me how and which attachment to use for making a channel for brass small hinges to set in a resin rectangular flat sheet that is only 1/4”wide edge ~(hinges need to go in edge) ~ 🤷🏿‍♀️ HELP!!

[@Le7h10]

So once you sand down the coaster, you just put a thin layer of resin over the top and wait 24 hours until its cured?

[@kelsey.targaryen]

Hi there! What kind of mask are you using? I really need one and would love your help keeping my lungs safe and healthy!

[@boopmybutthole3616]

I've discovered another tip within your tip...maybe leave the masking tape on when putting the "metal" through the hole to lessen scratches and such?

[@maeve4385]

❤

[@hannahshiffman7390]

Hi, I was just wondering how much something like this costs? I'm relatively new to resin and would like to be able to sand and polish my resin without using manual tools (i.e. sandpaper, nail files, that sort of thing) where I won't damage my resin. Do you have any advice for someone on a budget? I already have a hand drill, so that's not required

[@donstimson5435]

the links for the mask no longer work. What brand/model is it? Thanks.

[@sandyj125]

Can you share a link for the mask that you use? Oder the name and model number please?

[@evamooney2953]

Would an air purifier work well in replacement of the mask if you find masks uncomfortable?

[@evamooney2953]

@@SteveMcDonaldArtsandCrafts OK thanks

[@evamooney2953]

@@SteveMcDonaldArtsandCrafts thanks again for all your help really appreciated

[@paquitoperez2116]

A bit late for a comment... but hey!... FYI, <a href="#" class="seekto" data-time="470">7:50</a>, there is no link for the resine thing 😲

[@MsHouston1977]

Sorry this video u used some paste to polish the resin can I please get the name?

[@terrykobernick8373]

I thought I would learn how to do a object from start to finish with a Dremel. Can't find any

[@gaylynnsaunders7887]

The title is a little misleading. There’s not much on here about polishing, not even what types of compounds to use.

[@lisajarvis3820]

Is that tool really that soundless? Can’t hear it making any noise whatsoever in video…

[@MaxinesCraftynStuff]

:)

[@pepethepatriot7524]

omg could you PLEASE be more specific and tell us the type of bits you are using besides "soft thing", I mean seriously? Kinda makes the video useless

[@rubberducky2926]

I am NOT impressed I wish you would have shown how to sand and polish a sphere or an egg shape that was sanded down with a dremel and polished shiny...a coaster is really no challenge at all!

[@rubberducky2926]

@@SteveMcDonaldArtsandCrafts thank you that is much appreciated!