How I Made The Cowl For Rc Citabria Plane . Full DIY Build

[@SoloRenegade]

Simple but effective. this is a Great way for people to get into composites. small simple projects that don't require perfection. This would be great as a STEM project to introduce composites to people. Thank you for sharing.

[@fixerden]

Thank You for sharing experience. Great channel!

[@ahmedhamdy7596]

Liked the simplicity. Did you try this method in previous builds? as I know chopped fiberglass mat has a binding agent to hold strands in place. So just using epoxy is not enough, as it will not release the binding agent and parts of the strands will not be saturated with epoxy, making the part lacking strength. You can try adding a solvent in epoxy (like acetone), but in very small amounts. Keep in mind you have to insulate the foam before applying epoxy with acetone (with wood glue and water mix or polycrylic). Keep posting videos and don't delay 👍🏻

[@eduardoserrano5453]

Why the mould wasn’t the cowl? I don’t understand

[@Didi-dd7xt]

Hello, do you use petroleum jelly between the foam and the fibreglass mold ?

[@Didi-dd7xt]

And how many layer of fibreglass cloth is used to make the mold

[@rcmaking3412]

@@Didi-dd7xt yes

[@JAGDISHKUMAR-ey2ii]

Nice video sir, Glue gun stick kya alag alag quality me aati hain? Becoz jo main lata hoon wo jyada soft karke nhi pighalti 🤔

[@rcmaking3412]

Ap ke glue gun sahe se hot nahi hota is liye glue stick soft nahi pegalta

[@stewartkeeble2371]

What did you use for the mould release!! Nice job 👍

[@rcmaking3412]

I could not find a release agent for mould but i use the petroluim jelly for release

[@stewartkeeble2371]

Nice bit of out of the box thinking there.. well done sir 👏👍

[@SatishKumar-iu1yx]

bhai hardner or raisin or kya milana hai or glsss fiber kitna value ka lena hai

[@jorgecalvo9440]

Was the first one you made a mold? and then the actual part was the second one you took out of the mold?

[@ngneon2.0official15]

Aoa Where are you from City? I wany to buy controller from you Plz reply

[@ngneon2.0official15]

Plz bata dayn

[@rva1945]

4:06 what do you apply to the mould for later separating the pieces?

[@rcmaking3412]

I use the simple liquid petroleum jelly

[@Didi-dd7xt]

@@rcmaking3412 is petroleum jelly th e same as Vaseline ?

[@rcmaking3412]

@@Didi-dd7xt yes petroleum jelly is the name of Vaseline

[@Didi-dd7xt]

@@rcmaking3412 thanks.

[@SatishKumar-iu1yx]

bro plz take 2 classes to teach me how to make 😊

[@rcmaking3412]

@@SatishKumar-iu1yx kzbin.info/www/bejne/e2XPh5KblruqabMsi=PDP6HBNlv0_LFI-s Check this link its full building vedio

[@sotm6078]

You didn't use any release agent ??

[@rcmaking3412]

no

[@rcmaking3412]

but i use the covering tape

[@luissouza5501]

Show !!!!!!!!!!!!!!!

[@MarcSt-Amant]

Hi which type of epoxy are you using..thanks

[@rcmaking3412]

Normal epoxy 2:1 mixing ratio

[@MarcSt-Amant]

ok, 2:1 more resin or hardener ??@@rcmaking3412

[@rcmaking3412]

@@MarcSt-Amant you can mix 2: resin and 1:hardner

[@avidali7783]

Hiii I'm your subscriber from India please you provide me.sukhoi 27 foamboard material link I want purchase......😊😊😊

[@rcmaking3412]

You can use dipron foam board purchase from Ali express