How I made this Travel Friendly Victorinox Traveller

Hope you enjoyed that build video! Let me know if you think this build would be TSA approved. Is this one more likely to pass than the previous one that I made?
My Website:
f2scustoms.com/
My Instagram:
/ fit2survive_
Links to the tools and parts for this video:
Victorinox Traveller Lite: amzn.to/3LJBX4t
Havalon Scalpel: amzn.to/3uZ2Onj
4mm Brass rods: amzn.to/3JECIdd
Music from purple-planet.com and
Uppbeat (free for Creators!):
uppbeat.io/t/r...
License code: VDVURCZ02BIDWVDF
uppbeat.io/t/r...
License code: XSXIGQYBMF64GEI6
uppbeat.io/t/h...
License code: R2KWUYG5DGESAA9S
uppbeat.io/t/n...
License code: TEVAW3JY0XPMITEP
uppbeat.io/t/n...
License code: TSCPFY84JETX75ZT
uppbeat.io/t/s...
License code: OCGKEOIOR88BTYW1
uppbeat.io/t/n...
License code: WSXJZTUDC1Y4VVL4
uppbeat.io/t/s...
License code: CCDFKMUX2SM79BRS
uppbeat.io/t/s...
License code: BTBXUK8EV5AOYISE
uppbeat.io/t/n...
License code: DDTYPYY3A9FXCJO2

[@CharlesHeller]

Scissors with blunt nose are supposed to be ok per TSA, BUT... Always travel with a self-addressed stamped priority mail envelop on board, so that they can mail it to you rather than confiscate it. NEVER let them "take" it. Also a good idea to download TSA rules, print and highlight them for distribution to the "unwise" officer who doesn't know the rules.

[@FittoSurvive]

There are several things that "should" pass TSA, but the self addressed envelop is definitely the best contingency plan.

[@tikkidaddy]

Unwise or just a theif

[@JokerInk-CustomBuilds]

Anything to save a beloved custom edc tool! :D

[@Vpentrov]

They just let you do that? Did they ask any questions?

[@cecilm3720]

That’s actually a great idea. They might still “forget” to mail it, but better a slim chance than an outright confiscation. (I got an empty lighter confiscated, even though TSA rules were clear that it’s OK to pack.)

[@cheryl6222]

I liked the comment about "travel with a self-addressed stamped priority mail envelop". I like your video. You are very through to show even the battery compartment

[@FittoSurvive]

Good. glad you liked it.

[@anniegogogone1806]

Great build. If i couldn’t fly with that, i would never give it up…. Cancel that flight! LOL.

[@FittoSurvive]

😊 Thank you!!

[@rogerhudson9732]

Don't knives fly in hold luggage ?

[@doubledrats235]

For a knife like that I would put it in checked luggage or travel with a stamped and self addressed bubble wrap envelope and mail it to myself from the airport if the TSA gave me grief. I had a Compact SD SAK on my key ring when I travelled back and forth many times between NYC and Orlando and never had an issue. Until one day when I tossed my keys into the bin to be X-rayed and the loud clunk alerted a TSA agent. She opened the knife and said the sharp blade was not allowed in carry on. My wife gave me a dirty look since she didn’t want to miss the flight so I gave up the knife and bought a new one for $20 when we got home. I heard that the TSA sells some confiscated items. I wonder if they pocket some nice ones. I now put my SAK in checked luggage.

[@orenmontgomery8250]

Yeah, at that point it would be reschedule and mail it because I'm not handing that over.

[@l.nassah6728]

It's as if the Havalon was meant for SAK, just the perfect fit, Imagine a surgeon/paramedic/doctor/nurse orders one of these custom from you and happens to use it in an emergency situation.... That would be the epitome of EDC usefulness! Awesome work as usual! I thought TSA doesn't allow anything sharp edged or pointy ? That goes for the can opener, scissors, corkscrew yes hmm, intresting to know they aren't

[@matthewstrunk605]

The Transportation Security Administration currently states that corkscrews without blades are acceptable in carry-on bags, while those with small blades must be placed in a checked bag (as with any sharp object, they prefer it be sheathed or wrapped to prevent baggage handlers and inspectors from being injured). Scissors, if packed in carry-on, they must be less than 4 inches from the pivot point. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors.

[@michaelkeller5008]

saddest thing when travelling - for me as a swiss - is you have to leave your SAK at home (you never know when it is legal to carry it around in the destination-country) it's realy a shame that victorinox doesn't come up with a solution like this for their Traveller series on their own. luckily there are people like you doing this :)

[@FittoSurvive]

Yes, that is quite unfortunate. Especially when traveling around Europe. It would be super awesome for Victorinox to make a bladeless 91mm model.

[@michaelkeller5008]

@@FittoSurvive well for the 91mm i'd like the option to remove the blade. Like it is possible with the tools on the rescue tool... a bladeless 58mm (like the minichamp, just without blades) would be fantastic to travel...

[@FittoSurvive]

@@michaelkeller5008 Exactly! A bladeless Minichamp or MiniChamp Jetsetter would be fantastic for traveling.

[@michaelkeller5008]

@@FittoSurvive most defenetly! Btw - do you know a customizer in Switzerland who could make the Rescuetool into "41a compatible" (german weapons-law, article 41a. the most restrictive in europe - a knife legal by 41a is legal everywhere in europe)? (replacing the onehand-blade and linelock with a twohand-blade without lock)? Victorinox can do it but charges more than the 41a-compatible but discontinued version of the rescue-tool did cost...

[@FittoSurvive]

@@michaelkeller5008 I do not know of any customizers in Switzerland unfortunately. 🤔

[@andrewvautour1795]

That sior was awesome! I LOVE THE SCALPLE and not only for travel, it is just a great idea!

[@FittoSurvive]

It really is!

[@petruf8305]

The scissors should not be a problem with airport security, the corkscrew is more of a grey area, and it can be down to the agent’s judgement. Awesome build as usual :)

[@edwardfletcher7790]

It not only depends on the Airport but the individual inspecting you. Remember, these idiots have confiscated nail clippers in the past !!😠

[@FittoSurvive]

Interesting, I didn't think about the corkscrew causing trouble. But yeah, it all comes down to the decision of the TSA agent inspecting you.

[@FittoSurvive]

Yeah... I've seen that happen before. It's mad. I can see the news headline: "Airplane taken hostage by terrorists wielding deadly nail clippers."

[@matthewstrunk605]

The Transportation Security Administration currently states that corkscrews without blades are acceptable in carry-on bags, while those with small blades must be placed in a checked bag (as with any sharp object, they prefer it be sheathed or wrapped to prevent baggage handlers and inspectors from being injured).Scissors, if packed in carry-on, they must be less than 4 inches from the pivot point. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors.

[@radamspse]

I had a Victorinox credit card combo confiscated once. As you know the knife is miniscule and the scissors are quite small as well. I just stood there in disbelief, next they will confiscate paper clips and hair clips!!!

[@sadmageboi472]

I've been looking into those lots of viccys from the TSA just to practice on because of this channel, amazing work today my guy!

[@FittoSurvive]

Yeah, hopefully this knife doesn't end up in one of those Ebay lots... 🤣🤣🤣I'll have to keep my eyes open for it. 😝

[@matthewstrunk605]

One word “absolutelytotallyawesome”. Stellar factor of 100 my friend.

[@FittoSurvive]

Just one word, huh? 😉 Glad you found the video, I meant to send you the link to it. 👍🏻

[@233kosta]

The polished liners look very nice indeed, but I also quite like the dull/shiny contrast as they come from the factory.

[@hitchpost5822]

What a great build ! , I don’t know if you or the customer came up with that idea but it is genius. Now if some over zealous TSA agent doesn’t take it away. There should be away to submit tools to an authorizing board or person that would issue a permit authorizing the item to be carried onboard an aircraft.

[@FittoSurvive]

Thank you!! 😊 Yeah, that would make sense for there to be a way to get a tool certified. 🤔

[@jeffslaven]

Really nice build! I'm surprised that Victorinox doesn't offer something similar.

[@FittoSurvive]

Thank you! Yeah, it'd be cool if they did make something like this that would be readily available.

[@makr7895]

They have a "kniveless knive", the Jetsetter, I think, but of course none with an exchangeable lade as far as I know.

[@FittoSurvive]

@@makr7895 You are correct.

[@70RD]

Your videos are therapeutic.

[@FittoSurvive]

😊 Thank you! I am thrilled to hear that!

[@Kleiner_Lutz]

While I do enjoy your short videos where you show the finished product, I really like these longer videos where we can see what exactly you did. Good job, keep it up 😉

[@FittoSurvive]

Hey! Glad that you enjoy them both. The build videos take me about 5 to 6 hours just to edit. 🤣 Thanks!

[@Kleiner_Lutz]

@@FittoSurvive yeah that's what I guessed too, don't worry about it

[@dennisajones9352]

U use another knife too disassemble the other one? Ahhh! Learning everything! It’s amazing! What a useful and productive way to reconfigure and then construct another!

[@FittoSurvive]

Yeah, kind of ironic, isn't it? 😅

[@volodymyrrudoman]

Awesome idea to address the blade issue! I also like leatherman for kids with detachable blade. Love that you've polished those aluminum plates - it looks way cooler now!

[@FittoSurvive]

Thank you. I appreciate it.

[@thecrakmasta]

That scalpel Holder thing is pretty cool

[@FittoSurvive]

Can agree with you on that

[@orenmontgomery8250]

BRILLIANT! Not something I'd crave necessarily, but very cool.

[@FittoSurvive]

Thank you. 👍🏻😁

[@andreasweber7828]

Hairdryer instead of soaking in water works a charm

[@FittoSurvive]

Good idea. 👍🏻👍🏻

[@jeffayoe7468]

The removable blade is very cool! I wonder if victorinox will ever make a removable balde

[@tsc4945]

That mod is awesome, i also do some SAK mod but what you do is entirely in a different level 👍

[@FittoSurvive]

Thank you! I appreciate that

[@alexleon619]

Хорошая идея. Качественная работа ! Спасибо за видео. A good idea. High - quality work ! Thanks for the video.

[@FittoSurvive]

Спасибо! Я это ценю. 👍🏻👍🏻

[@willienelsongonzalez4609]

That’s got an alarm clock? Damn!

[@FittoSurvive]

It does! And much more in it.

[@justingere1824]

I feel like what you added is how that knife should come.

[@FittoSurvive]

Right? It would make sense.

[@cyclinder101]

Very inspiring Fit, thanks for the great quality videos. How do you select/remember the spring choice and orientation to match the tools, esp when you etch them?

[@FittoSurvive]

Glad to hear that! You are very welcome! When I first started out, I would keep all of the parts and springs carefully in order so that I wouldn't confuse them, but by now. I can recognize the springs and parts easily.

[@JokerInk-CustomBuilds]

Just ordered online: Multitool ferric acid brass sheet Making 3d printed custom scales without corkscrew cutouts but a custom needle placement. -and I am making deepcarry pocketclip on the backside if I can. -This is gonna be a fun project, I am gonna "TSA" a victorinox cybertool. I wanna do just bitdriver, scissors, pliers and a scalpel holder. Thanx for the inspiration andf awesome videos!

[@FittoSurvive]

Cool! Sounds like it is going to be an exciting project! 👍🏻👍🏻 Best of luck with it.

[@JokerInk-CustomBuilds]

@@FittoSurvive Can I ask what springs you used for your havalon scalpel mod? You didn't mention what kind they were in the video...🤗 -

[@kismitscorner]

Did you ever figure out what springs to use? I was going to ask the same question. @@JokerInk-CustomBuilds

[@JokerInk-CustomBuilds]

@@kismitscorner yes, it is two saw springs placed side by side...☺️

[@kismitscorner]

Awesome! Thank you so much! @@JokerInk-CustomBuilds

[@MrBradaz111]

I'm learning a lot from your vids, thanks so much. whats the reason for loosing the keyring? could you have just used that backspring with the corkscrew? it doesnt look like it would foul the toothpick.

[@FittoSurvive]

Great! I am glad to hear that. I could not keep the keyring because the spring where it is located (can/bottle opener layer) was removed and can not be used on the corkscrew layer because the spring is too thin.

[@MrBradaz111]

@@FittoSurvive ahhh I hadn't thought about the thickness! Thank you. Just got to wait for Xmas to be given my swiss champ, then the fun starts

[@lHaveFeet]

Your videos are always so interesting

[@FittoSurvive]

Thank you! Glad that you enjoyed it!

[@groznyneme]

Got me nervous when he opened the scalpel like nobody's business 😬 😅

[@FittoSurvive]

😎 No worries.

[@blacksquirrel4008]

What got me worried was the machining with the blade installed. If I had tried that it would demonetized for the gore.

[@FittoSurvive]

@@blacksquirrel4008 😬 Yeah, I guess that really could have gone wrong. 🤞🏻

[@c.a.m.5948]

Great video and build. I fly a lot, and the thing I know about TSA, is there does not seem to be a hard fast. It seems to be at the discretion of the agents.

[@FittoSurvive]

Thank you! Yeah, it really does come down to that.

[@thomaschainey533]

Great video, thanks. Good job on the build. It would probably be ok on plane. I do not know if you can get into an airplane with it or not that all depence on TSA. But the scissors, although not a deadly weapon, in the right hands if used right can and are deadly. The can opener can be deadly.

[@FittoSurvive]

Thanks! Theoretically everything on this build fits the requirements on TSA's website, but even that doesn't guarantee that the TSA agent inspecting you will let it pass. Yep, even a pencil in the right hands can be a weapon.

[@Ukhov_Hiking]

Hi! Great job, you are a knife wizard!!!

[@FittoSurvive]

Thanks a bunch! I really appreciate it.

[@LittleSweed]

it really depends on who checks you when i traveld to england the scissors was fine but when i travled back home to Sweden the scissors was a huge problem so i had more or less give them my SAK but the guy was awesome and i allways have a envelope/pakage for these kind of problems so i mailed the kinife back home,

[@FittoSurvive]

Yeah, TSA rules are just guidelines, there's no guarantee that a "TSA approved" tool will actually be allowed to fly by the agent inspecting you.

[@xiaoyu88]

Jetsetter is the answer, but I every time I fly with it I get those looks from my travel buddies/ground team. But I don't want to check my bag and I don't want to travel without it. Last time I just checked my bag at the last minute. hate it lol

[@FittoSurvive]

Yeah, I completely understand you.

[@xiaoyu88]

​@@FittoSurvive I had an alox classic sd I bought in Germany and did not want to lose it after going through the post office and it was closed to mail it to myself, it was a good trip and I wanted to have it with me. My "modded" (with the scales you helped me get from AliExpress back in the day) Compact stayed home safe. Also, I do plan to order one from you one day, and make it travel friendly, but as I come to think about it, I would never risk losing it to some idiot who has a bad day. Quick question, I know you modified some Lethermans, do you have maybe lying around some Style PS, or more importantly, a few tweezers from a CS/PS?

[@seven7ns]

Very good built. Why has Victorinox not think of it. Maybe they could an special flyers tool wit lots of other nice tools in it.

[@scipio7837]

Beautiful work

[@FittoSurvive]

Thank you!

[@gopro2804]

Please buy a pillar drill. If you need to apply heat to the scales a hot water bottle can apply a lot of heat safely.

[@FittoSurvive]

Yeah, I really do need to invest in that.

[@TheDrivebynerf]

I subbed. Great vid. Is this a victorinox ad? Lmfao. I have a 40 year old victorinox prestine, barely ever out of case, sadly has normal clock but now I'm thinking upgrade to led light

[@FittoSurvive]

Thanks for the sub! Definitely not a Victorinox ad... In fact, I've got a feeling that my picture is in the post office in Switzerland. "Wanted for defacing Swiss Army Knives". Or something like that. 🤣🤣🤣

[@JaimesonLaLone]

TSA regs are scissors less that 6 inches are OK. I have a SAK Jetsetter (58mm) and I am able to carry it onboard no problems

[@FittoSurvive]

OK, thanks. 👍🏻

[@JaimesonLaLone]

I should say the Jetsetter is my "don't feel naked" while flying when my EDC SAK Ranger is in my checked bag

[@FittoSurvive]

@@JaimesonLaLone I completely understand that. 😅

[@jorgecontini5187]

Good idea . Excelent . Congratulation!

[@FittoSurvive]

Thank you! I appreciate it.

[@johnlogan4053]

It looks like you could have put in something opposite to the scalpel. Nice job.

[@FittoSurvive]

There's definitely space for something, but the spring wouldn't allow it.

[@233kosta]

For a "warm water without warm water" solution, ifixit's iOpener comes to mind

[@neoaliphant]

Video request for leatherman mods, not taking apart as such, but things to add on use with. Thanks

[@FittoSurvive]

I have been wanting to anodize the titanium scales of my Leatherman Charge Ti for a while now... I may do something with it. 🤔

[@neoaliphant]

@@FittoSurvive on my surge ive added a selection of bosche hacksaw blades to the pouch, ground down a cheap driver holder to fit in the thin leatherman bit driver, but always on teh lookout for more tricks

[@FittoSurvive]

@@neoaliphant Interesting mods! I haven't gotten into many of the Leatherman mods yet.

[@CharlesHeller]

@@FittoSurvive Do you know Max lvl edc?

[@FittoSurvive]

@@CharlesHeller Yes! I know Dominic. He's really talented!

[@UCkI6pPBQ1IaNlicrwsnR5_w]

Why did you modify the knife spring to fit the openers, instead of just using the original openers spring (thereby keeping the keyring)? Love your work, but it seems like you rushed through a few of your decisions without explaining them.

[@FittoSurvive]

I had to keep the knife spring because it is the only one that can accommodate the corkscrew. The openers spring is 0.3 mm thinner than the blade spring. This is why I had to use some washers next to the can and bottle openers.

[@unfi6798]

Love it mate.!

[@FittoSurvive]

Thanks!

[@AMERICANPRIDE1100]

It’s cool to watch you work but a little scary with the scalper attached

[@FittoSurvive]

😅 Yes, I have had several people comment on that. 🫣

[@zelja.]

I had "the honor" to go through TSA checkpoint. I wouldn't even try (as non-american) to persuade those people that this modified SAK is TSA compliant. I just place my SAK in the checked luggage. I don't need it in the cabin, and if you have some tools (like screwdriver for your glasses or whatever), just bring cheap chinese multitool or something that you don't care about. Carrying *locking* knife in Europe is probably illegal in most countries, but SAK's are generally OK. You don't need it every hour, right? Just keep it in your pocket. Police needs a court order to search you (at least where I live). I carry an Explorer all the time and use it basically just to cut that shrink-wrap thingie off the soda bottles packages.

[@FittoSurvive]

Yeah, I know exactly what you mean. 😬

[@John-qm2ky]

Great build. Not airline friendly for Aust. as you can’t carry on corkscrew or scissors but replace the corkscrew with a screwdriver and remove the scissors and there’d be no dramas.

[@FittoSurvive]

Thank you. The scissors make sense. It's odd that the corkscrew would cause trouble, but I don't doubt it. 😅

[@timsimco9471]

The scissors are small enough to pass tsa check. I think the limit is 3 inches so even the leatherman raptor is travel friendly. My travel Vic is scissors and openers with a Phillips and fine screwdriver on the underside.

[@edwardfletcher7790]

WRONG ! The blade limit to street carry in many countries is 3 inches. That doesn't mean you can carry smaller than 3 inch blade on a plane ! LMAO

[@FittoSurvive]

Interesting. So, you've flown with that and not had any trouble?

[@FittoSurvive]

@@timsimco9471 You mean the full length of the scissors, right? Or the cutting edges can be to 3 inches?

[@timsimco9471]

@@FittoSurvive I haven’t had any trouble, however, I have always had to explain it to the tsa agents and allow them to examine it to make sure it meets their criteria for safe travel. Red sak scales tend to be a red flag, so I have to allow them to do their job and not rush them so you have to plan accordingly time wise and not be a jerk going through security.

[@FittoSurvive]

@@timsimco9471 I'm sure being cooperative and polite helps the process a lot.

[@konradxtofik]

I once got my corkscrew taken away at the airport checkin when flying between Warsaw and Milano. Not sure if the corkscrew is allowed onboard then. Thanks for the vid and showing your customization.

[@FittoSurvive]

That's crazy! 😕 TSA can be quite excessive at times.

[@konradxtofik]

@@FittoSurvive it is madness. I’d never kill a fly and love carrying my Victorinox. 😭😭😭

[@FittoSurvive]

@@konradxtofik And really, what are you going to do with a corkscrew?? Hijack the plane? 😅

[@konradxtofik]

@@FittoSurvive duh 🤪😂😂

[@Twilightzoneisreal]

I was able to carry on the plane. Just have to put it in your luggage and NOT your carry on. That goes for guns too as you won't be able to access it until after you get your baggage. Not 100% sure if that rule applies to international flights. Fine job! Thanks for sharing.

[@FittoSurvive]

Definitely is not a problem with check in luggage. Thanks. 👍🏻👍🏻

[@fish3977]

I would have gone for exacto style blade as those are easier to replace but I dunno where you could salvage a holder from.

[@FittoSurvive]

Fitting an exacto style blade would be pretty complicated.

[@dalecarr5445]

This meets TSA published requirements. I don’t think it would be an issue but you always have to hope an agent isn’t having a bad day.

[@FittoSurvive]

It's unfortunate that it comes down to the mood of the agent on that particular day. 😣

[@My_Name_Is_David]

Love your builds so much. Have you ever considered if a civivi baby banter blade would fit in a SAK?

[@FittoSurvive]

Thank you! I have not size up the Civivi. Do you think it would fit?

[@My_Name_Is_David]

@@FittoSurvive lengthwise it looks about perfect, but it’s probably too thick (from the edge to the spine) even with modifications to the pivot hole.

[@FittoSurvive]

@@My_Name_Is_David Hmmm... That could be a problem.

[@user-dl1cf4xr6t]

Thats really cool

[@FittoSurvive]

Thank you!

[@Go-zi1py]

Could you have added a magnifying glass in the empty space?

[@FittoSurvive]

Unfortunately, no.

[@cecilm3720]

SAK-mod idea: A metal insert - into the blade-slot - to prevent the blade from closing when open. [Info below.] May I suggest this as a product for you to offer? I would definitely purchase one for each of my SAKs. Here is the info: Channel name: STORN Video title: Victorinox DIY LOCK for 90mm

[@FittoSurvive]

Very interesting. Looks fairly simple to make too. Thanks for sharing

[@cecilm3720]

@@FittoSurvive Great. :) I thought this might be a neat feature.

[@FittoSurvive]

@@cecilm3720 👍🏻👍🏻👍🏻

[@erebostd]

Or you just buy a wenger SAK (they are now part of victorinox), they come with locking blades 😉👍

[@cecilm3720]

@@erebostd Locking blades are a no-no in many places.

[@tikkidaddy]

Oh this is exactly the question I was going to ask. I love the Havalon knives but the handles are a bit weak...its a skinning knife, not a prybar...I get it, but still a Vic is way more solid...so a Vic Ranger model for a larger Havalon blade maybe?

[@FittoSurvive]

Absolutely, it will work with any 91mm SAK.

[@tikkidaddy]

When I got my Havalon I was planning on boar hunting with my son in SC and wild boar hide is thick and hair abounds so I got the biggest one they made at the time. You can of course hone them and strop in a have to case as well

[@FittoSurvive]

@@tikkidaddy I like that they have an optional saw and gut hook that can be placed on the Piranta size.

[@tikkidaddy]

Bone saw??! WOW!....That's exactly why Havalon is so appealing to many hunters. If you're in the field ya got choices. Carry lightweight diamond and ceramic honing tools, carry more than one knife, carry something with more than one blade. Those Scalpels weigh next to Zilch compared to an outdoor edge set or a Buck 110 etc

[@FittoSurvive]

@@tikkidaddy Yes, it really is a nice option. 👍🏻👍🏻

[@augustinboyd9626]

P.S with all of the batteries included please...

[@CharlesHeller]

Where can I buy that electronic scale gadget to go on my 91mm Ranger??? Ooooh...

[@FittoSurvive]

The electronic scale is original from Victorinox. It can be found on the Victorinox XAVT or the Victorinox Traveller. But, it is not easily swapped. The first liner has to have cutouts to match the electronics.

[@rambazamba9575]

With no lock, this knife better not collapses on your finger. Chances are your finger is gone.

[@FittoSurvive]

I did upgrade the mod. Now I can install the scalpel with the lock. kzbin.info/www/bejne/r4rcdqiZo7V3atU

[@nikitakinsella2059]

Is it possible to put a traveller's red front with the screen and backside on a cybertool lite?

[@FittoSurvive]

Yes, it is compatible. But, the side with the screen will need a special liner behind it to make space for the sensors.

[@joshuap6569]

Instead of modifying the backspring for the can/bottle openers could you just use the backspring from the original slot? the awl and corkscrew look the same on the attachment point then you could keep the keyring/lanyard.. I've never customized one but I'm going to real soon

[@FittoSurvive]

The can/bottle opener spring is 0.3 mm thinner than the original blade spring and corkscrew. So, if you were to use the openers back spring, then the corkscrew will be too thick.

[@julo7138]

Great build! thanks for sharing :) What is your "setup" for the two grinding wheels?

[@FittoSurvive]

Thank you! I don't remember exactly, but seems like the "stone" wheel on the left is a 120 grit and the disk on the right is a diamond coated wheel for sharpening. Basically on the left is course, it goes through the metal quickly. Then once I get close to where I want to be, I use the one of the left for more precision.

[@julo7138]

@@FittoSurvive excellent! Thanks

[@cecilm3720]

Just look at the display trashcan of confiscated items at the airport security check… tons of scissors in there (even tiny nail cuticle scissors). Great build BTW.

[@FittoSurvive]

That is true. They really do go overboard, but again, that is their decision to make apparently.. 😒

[@cecilm3720]

@@FittoSurvive Better to err on the safe side, IMHO. One can’t argue with officials: I had to dispose of an empty cigarette lighter (even though I checked online and it said that empty lighters are permitted). Would be a shame to have such a gorgeous modded SAK confiscated.

[@FittoSurvive]

@@cecilm3720 I completely agree. Especially with the scissors. But, the guy who ordered it said that he will let me know after he flies with it. Then I'll pin a comment here of the results. 🤞🏻👍🏻

[@thomasmanson1119]

Interesting that you seem to be wearing a Leatherman bracelet! Tom KC3QAC

[@FittoSurvive]

Yep, it's a great multitool

[@stuartmiller8053]

Cool modification and build. Do you have any ideas of what you could swap out the parcel hook for? Cheers Stu

[@FittoSurvive]

Thank you! The parcel hook has a unique shape, so unfortunately I have not found a replacement for it.

[@CharlesHeller]

You are going to give moral offense to the Clan of The Parcel Hook.

[@FittoSurvive]

@@CharlesHeller 🤣🤣🤣 For sure.

[@aarde7036]

@@CharlesHeller Hahahaha, yes! I love the hook!

[@andrewfett142]

👍🏼 I like it. I’ve heard they will take any tool. Blade or not. Beware!!!

[@FittoSurvive]

Thanks. Yeah, I am sure that they can. 😕

[@felixcat9318]

If you could put the scalpel blade into your checked luggage, why would you not just put the complete, unmodified Victorinox knife in there instead?

[@FittoSurvive]

The scalpel blade is removable. That's what makes it "travel friendly". So, before you fly, you toss scalpel blade leaving just the scalpel holder. After arriving, you attach a new scalpel blade. 👍🏻

[@tudormarcu2006]

Nice build! However I think it's still illegal for air travel - at least in Europe, as it contains a screwdriver.

[@FittoSurvive]

Thanks! Wow, you think the screwdriver would cause trouble on the plane too? Didn't think that it would, but who knows... Could be.

[@JokerInk-CustomBuilds]

round off the tip of the scissors so they are more dolphin nosed and I think they will be fine with tsa...

[@FittoSurvive]

True. That probably would help.

[@JokerInk-CustomBuilds]

@@FittoSurvive Humble tip for keychain carry on custom builds with no keyring loop; Just hook the small ring to the hook-tool and close it. It allmost closes and is in my opinion more than secure enough to hang from.... So if you attach the small keyring to your bigger keyset, you can unhook and hook the knife easily by just pullin in the right direction... It is atleast a makeshift solution if needed on the go that is worth a mental note....☺️

[@geeeeeeeezzzzzzzzzz]

That was great skill to watch but I can't help thinking just put it in the hold luggage or maybe there is some essential reason to carry it on a flight?

[@FittoSurvive]

Yeah, that would be the easy way to do it. 😂😝

[@CharlesHeller]

NEVER be without SOME tool on you, esp pliers. They never see my Swiss Tech "Swiss Key." Gives me a small knife for oranges and such. Put it on your key ring. Roll of quarters and a sock gets right on, too.

[@Andrei-vr4pj]

Or you can simply remove the knife layer without any modifications, right?

[@FittoSurvive]

I can remove the blades and replace them with the can and bottle opener. It still requires modifications, but not as difficult.

[@oscasterr]

I love your work, where are you based? I wonder to ask you for a knife but I'm worry about Spanish customs, thank you

[@FittoSurvive]

Thank you! I am from the States, but my job has currently taken me overseas to central Asia. I ship worldwide though.

[@francobuzzetti9424]

I've been watching lots of your videos on these mods , is it possible to include any kind of lock for the blade?

[@FittoSurvive]

I am still working on that. There are a couple of options, but haven't found any solutions yet. I will post the project to KZbin when I get it all figured out.

[@thomasmanson1119]

I like the Evolution (e.g. Wenger) scissors and pliers because of their spring design. Are they interchangeable with the original Victorinox designs? Thanks, Tom KC3QAC

[@FittoSurvive]

I've not tried placing the Wenger style pliers in a 91mm SAK. But I agree, their spring is much more dependable. I place the Wenger style scissors in the 84mm SAK though. Takes some modifying, but it works.

[@CrisGar76]

Amaizing

[@FittoSurvive]

Thank you!

[@ignaciomartin1238]

Great mod! Looks great and perfectly finished. Corkscrews are prohibited on airplanes as far as I know and that size scissors same. But incredible nevertheless.

[@FittoSurvive]

Thank you! It's rough to say, seems like there are so many different answers out there. It'd be awesome if you could mail the tool in to be "certified" TSA approved.

[@matthewstrunk605]

The Transportation Security Administration currently states that corkscrews without blades are acceptable in carry-on bags, while those with small blades must be placed in a checked bag (as with any sharp object, they prefer it be sheathed or wrapped to prevent baggage handlers and inspectors from being injured). Scissors, If packed in carry-on, they must be less than 4 inches from the pivot point. Any sharp objects in checked bags should be sheathed or securely wrapped to prevent injury to baggage handlers and inspectors.

[@FittoSurvive]

@@matthewstrunk605 Well informed answer. Sounds like it was taken straight out of the textbook. Thanks. 👍🏻

[@dawnmoriarty9347]

From personal experience in Europe no scissors or even nail clippers are permitted

[@FittoSurvive]

@@dawnmoriarty9347 Yeah, some times the TSA can be super intense.

[@steveb1972]

Last time I travelled by air I had a small pair of nail clippers confiscated!

[@FittoSurvive]

It's crazy, right?

[@konradabel2353]

Forgetting for a moment the things that you'd take off to make it TSA approved, is there anything from other SAK's that you'd replace all of the sharp bits with to really be TSA 'approved' (well at least less of a problem) and still be quite compact? That would be a video I'd like to see.

[@FittoSurvive]

Certain tools can be easily substituted. Others not so much. Like, if I was making this knife for me, I'd definitely remove the scissors and there's nothing to substitute it with. I could replace the scissors with pliers for example though.

[@CharlesHeller]

@@FittoSurvive How about modding the scissors to be detachable with a scalpel blade base?

[@FittoSurvive]

@@CharlesHeller That's a cool, wild idea. Not sure at the moment how I would do that though. 👍🏻👍🏻👍🏻

[@frankysour]

Great video and great job as usual! Question: The scalpel seemed to have the stud protruding on both sides at the beginning... Wasn't it possible to have it mounted flipped around? Would have been one hand opening (with right hand :) ) in that case.

[@FittoSurvive]

Thank you! The scalpel holder could be placed on the other side of the knife, I'd have to use a different set of scales without the corkscrew cutout though.

[@frankysour]

@@FittoSurvive yeah, that I understand, but I meant flipping it (together with it's springs, of course) in that same layer where you put it (unsure if there is enough space on the top side, though.... I thing the lower part of the SAKS is a couple mm wider than the top) As you may imagine, I am trying to understand how your magic is worked out, very fascinated by your work...

[@FittoSurvive]

@@frankysour OK, I see what you mean. The spring can not be flipped unfortunately.

[@frankysour]

@@FittoSurvive ......that makes a lot of sense, I need to study a little bit more 😁😁 but... Fantastic that you answer me, honored!! Very kind and available, in addition to being a sak Jedi Master...

[@FittoSurvive]

@@frankysour Welcome you are, young padawan. 😅👍🏻😁

[@StarsoftheStreets]

@fittosurvive Could you please tell me what is the thickness of the brass pins on the Victorinox knives? Thank you.

[@FittoSurvive]

Hey, the brass pins are 2.5mm and 2.2mm.

[@StarsoftheStreets]

@@FittoSurvive That's great, thanks a lot for your reply. That's much appreciated!

[@FittoSurvive]

@@StarsoftheStreets You are welcome.

[@chrismacdonald8846]

Can you do this with The mini champ and put stay glow skills

[@FittoSurvive]

I can. But I would have to use a different (smaller) scalpel holder.

[@gbuehler34]

make a sak just for taking apart the builds

[@FittoSurvive]

😅 Uh huh.

[@grahamwest1079]

Like the scalpel blade mod

[@FittoSurvive]

Thanks. 👍🏻👍🏻

[@huey_UK]

What were the three (actually two) springs you used for the Havalon layer, they look like they came from the fish scale remover layer?

[@FittoSurvive]

The 3 springs are from the descaler. I substituted them for 2 saw springs.

[@huey_UK]

@@FittoSurvive now Heinnie in the UK stock Havalon I'm sorely tempted to try your mod 😀

[@FittoSurvive]

@@huey_UK It's a great mod! Takes a lot of grinding on the scalpel holder, but definitely fun to do.

[@timsimco9471]

For removing these scales I warm them up under my arm pit for a while. It really sucks carrying around an Xavt that way.

[@FittoSurvive]

🤣🤣🤣 Thanks! Loved that!

[@alexriddles492]

I have not tried this but I think a blowdrier might be a good way to heat the scales.

[@FittoSurvive]

@@alexriddles492 That's a great idea actually. 👍🏻 Thanks.

[@s.h.v.c2865]

@@FittoSurvive A heatbag (the type filled with wheat that you microwave) would also work, that's what's suggested to help soften the glue for replacing phone batteries

[@FittoSurvive]

@@s.h.v.c2865 That's a really good idea too. Would the heat not be moist?

[@mltamarlin]

When traveling from the UK, screwdrivers are not allowed as I learned the hard way.

[@RidingKG]

Great build. I don't believe the scissors, needle, or corkscrew will pass TSA. I know your father had to have taught you it was not smart to work on the scalpel attachment with the scalpel still in it. That could have turned out real bad. Anyway, fantastic build, thanks for sharing.

[@FittoSurvive]

According to their website, scissors less that 4 inches from the pivoting point can be taken on board the plane. BUT, below that "rule" it says that the final decision though is up to the TSA agent inspecting you. 🤣🤣 Yeah... Should have taken the scalpel blade off while working on it. 😬🤞🏻

[@1967AJB]

You said that you were adapting this knife for someone, is this a service you offer?

[@FittoSurvive]

Yes, I make these to custom order. Check out my website for information on how to order one. www.f2scustoms.com

[@1967AJB]

@@FittoSurvive On my way!

[@charlesheller5767]

This might seem like a stupid question, and certainly not for a travel friendly Swiss, BUT, have you ever looked at what it would take to make a Spydernox into an automatic, or maybe assisted open blade? I can just hear people yelling at me on this forum, but I have to ask if it's a possibility...Imagine if there was a way to activate the blade from the back side, one-handed... OR, press the package hook and the blade deploys. THEN they wouldn't be asking you to delete the package hook! {: - ) Feel free to laugh at my idea...

[@FittoSurvive]

That would be absolutely awesome! I am not even sure how to set it up. But who knows, maybe it could be done. I will definitely think about it.

[@5093329225]

noticed there was no lube used. does the action feel the same even after u cleaned all the lube ?

[@FittoSurvive]

I lube the knife after I finish assembly. I noticed that if I use lube during assembly it usually gets brass filings in it and I have to clean it out and replace the lube.

[@karinamcfall3383]

🔥🔥🔥 nice.

[@FittoSurvive]

Thanks!

[@thomasmanson1119]

Will the off-center hole in the brass spacer not affect the operation of either the new knife or the Havalon tool?

[@FittoSurvive]

I've literally made hundreds of these modifications with the pivot bore like that. Haven't had any issues yet. *knocks on wood. 😋

[@mckennamike1]

Can you add a link to the gel pad you used to remove the scalpel blade?

[@FittoSurvive]

It is actually a plastic blade remover. Here is a link. amzn.to/3BTEmVF

[@erikgonzalez1762]

Is it better for you to provide you with a swiss army knife for a custom build???

[@FittoSurvive]

It really depends on what you are wanting. In this case, with the LED screen and all, it was best for me that the tool was provided.

[@Dan-qm7ho]

where do you get the mini torq hex screws and a parts to rejoin the scales of the knife?

[@FittoSurvive]

Torx screws and pivot barrels can be found from DeCustomForge (you can find him on Instagram). The parts for reassembling this knife were all "harvested" from other SAKs.

[@bgraingerjr]

Does anyone know what the springs are from that we're used to support scalpel??? I am going to try to build my own "travel-friendly" SAK.

[@FittoSurvive]

I used the saw springs.

[@dsheckx]

I have traveled with full size scissors in my bag. They had to ask the ranking officer but they let me go so I don't think you would have an issue. I was wondering if the new blade contacts a liner or spring when closed. It looks like it does. That would likely dull that part of the blade very quickly but may be resolved with a bit of grinding. Just curious.

[@FittoSurvive]

Cool, a couple of people said that they were able to fly with scissors too. Should be easy to fly with this setup then. I adjusted the scalpel so that the blade does not tap the spring.

[@bernardchoi]

i checked in nose hair scissors that were blunted at the tip. my be round off the tip a bit for added confidence.

[@FittoSurvive]

@@bernardchoi Interesting. That may help.

[@lucasbraun9783]

Form which Tool Are the springs you used for the scalpel? Are they from the saw which you used as a template?

[@FittoSurvive]

Yes, they are from the saw.