HOW I MOD / FIX MY GUITAR HERO GUITARS [Part 1]

[@Koalaz1]

Instructions not clear, blew up Chernobyl

[@subpar3462]

Koalaz *blew up Chernobyl even more

[@xoom8980]

again*

[@datboi1026]

ROFLMAFOOOOOOOOOOOO

[@BluCoolKnux]

Koalaz im the 666th like 😈

[@FernandoNeira_]

like 777

[@slades_salad]

that guy who broke your ribs was a forza player

[@ahhadesss]

A noob forza player, pros don't do that lol

[@timothycooperider8541]

Let's clarify Forza HORIZON 3 player😂

[@jlasiter881]

@Dajaanichu Mario kart ds is godly tho

[@encrusiato7553]

More like a Nascar driver from 1977

[@yridox8730]

That guy who ddossed you was a dude named Owen

[@Pharium]

Ukog's strat in the background has more dust than the GH franchise after it died

[@bighotman805]

"The difference is light and day" -UKOGmonkey 2019

[@UKOGmonkey]

Part 2 talks about the strum bar and how to stop overstrumming! kzbin.info/www/bejne/iaScg2tnaph9d5I If you have any other questions or need help with stuff then let me know in the comments, I can try to help or even make another tutorial! :D

[@FelipeGuimaraes45]

I'm having an issue with my xplorer guitar, it is down strumming infinitely without pressing the strum. It only stops when I press the up strum. It would be great if u could help me! :D

[@sparx0414]

Great vid dude, I'm looking forward for your part 2. I always over strum on my xplorer guitar.

[@Semystic]

Is there a good place to get miscellaneous guitar parts/buttons or should i just get entire guitars and use parts from older ones?

[@JuniorNitro]

Do you know how to fix a strum bar if it presses the yellow on downstrum when you try to hit a Green Red chord? I have this problem with the one I just bought.

[@lucas-jo1zv]

make one about how to stop the squeaky strum

[@nadeemg1831]

Poked my guitar with a needle and fcd soulless 9. Thanks.

[@cirava]

The GH3 Les Paul requires a T10 security screwdriver.

[@UKOGmonkey]

legend!

[@cirava]

@@UKOGmonkey I had to figure out myself, thank god my dad had that screwdriver set.

[@VacantSpirit]

ye ive tried to open it but always forgot so i give up as i'm not enough motivated to go garage look for one

[@touis1999]

T10 SS is for the 2 screws attached to the fretboard or the other ones that are outside the guitar ? Cause I haven't been able to find a screwdriver in my house that could remove the 2 small screws attached to the board lmao

[@samquilter8300]

@@touis1999 #1 - #2 philips head will be your best bet for the internal ones, precision screwdrivers might not have enough hold or torque

[@doinggraphics]

"The difference is light and day"

[@snorchill3170]

Lol I thought I was the only one who heard that

[@eriktoland3259]

And the lights have turned to gaaaayyyy

[@OutOfNameIdeas2]

Aka not a big difference

[@Latemusicreviews]

@@OutOfNameIdeas2 r/wooooosh

[@damientheshinx]

For gamers that is a difference cause we never go outside ha

[@microwavetrash2501]

sounds like ive got a cold its not that ive just *broke my ribs*

[@defuncy91]

just the usual. y'know, when you break your ribs i HATE when that happens!

[@L1N3R1D3R]

I tried not to bust, but I couldn't help myself when I saw the sheer sexiness of the insides. Please forgive me?

[@DavidMignault1]

it's alright man happens to the best of us

[@leaprunner]

"No more excuses, if you miss a note, you missed a note!"

[@darkknight2346]

I tried the safety pin method , now my buttons feel a lot softer , finally FC'ed Cult of Personality Expert!

[@CowboyyPoison]

Good shit

[@quakeIVreal]

For Americans watching: You're gonna need a small hex and a small Phillips.

[@kohlmannn]

**torx

[@1ava]

Torx 10 and Phillips head #1

[@HentaiNat]

Hex and torx are different. Hex are hexagonal shapes with flat sides like a normal hexagonal shape. Torx are like hex but sides are a bit concave, and the center is also concaved.

[@chimmychuck]

@@kohlmannnreally you only need a Phillips because I used only that to undo everything for my WoR guitar

[@rawbertdogler]

also, round off = strip

[@Bambuzzsprosse]

A little hint, to avoid rounding up the screws holding the fred-connector-board: do NOT apply as little pressure as possible, but the opposite. Apply as much pressure as you can without breaking the board itself because rounding screws happens when the screwdriver flips over the screw-slit which only can happen, when the screwdriver isn't pushed in enough. Otherwise, great video = )

[@VintageGameZ]

i opened my guitar and the board has a rounded screw and i cant open it, any suggestions?

[@Bambuzzsprosse]

@@VintageGameZ If it's completely round you can use a plastic-pen and melt the plastic with for example a lighter. Press the hot plastic into the screw and let it cool off. Take another pen, melt a bit more and apply it as well to create more stability. If you're lucky you can turn the screw without the plastic breaking. If the screw is not completely round but still has some rounded-off notches simply use a bigger screwdriver.

[@VintageGameZ]

@@Bambuzzsprosse I will give this a try after work and hope for the best thank you!

[@ChuckisNorrish]

@@VintageGameZ any update

[@FirstLast-yj1hp]

I got an Xplorer yesterday, the buttons were so bad.. the buttons were high af on the fret, kept getting stuck, stiff af worse than Amazon's guitar... I modded it poking holes with the pin and loosened the screws so it goes in the fret more.. filed down the button's sides so it doesnt have friction... fucking smooth af now its actually playable.. better than all the guitars I have now. Thank you so much for this!

[@AngelSutcliff]

Personally I like the ridge on the yellow button. It helps me know the position my hand is in without having to look down at the guitar

[@JustTooManyPuppies]

thats why its there yes i know this comment is 2 years old

[@maxv658]

You are a lifesaver! I have VERY few guitars to work with and my green button was having a contact issue or something(it only registered when pressed it super hard). Opened my guitar neck, cleaned everything up, poked some holes in the rubber and the green button issue is fixed and overall it feels like it's brand new again. Thanks a ton for the tutorial!

[@Triohs]

I just did the safety pin trick and my buttons feel absolutely amazing! I never would of thought of that.

[@TheeGamplayers]

Small correction there are Guitar Hero 3 guitars for ps2 with detachable neck ;) got you fam

[@DekuSkrub2129]

Can confirm

[@UKOGmonkey]

is that the kramer? i never used them, thanks for the info :D

[@krazykat9865]

My ps2 guitar doesnt come apart :(

[@marlowewoodring]

@@krazykat9865 its probably the SG

[@Tiduspeco]

"strap-on holder"

[@YoshoDinoSide]

*"h e h"*

[@xXN3V3T5Xx]

i was legit about to look up videos about this stuff..... what a god

[@coasternoodle7612]

I love how enter sandman is playing in the baking but a 8-bit version good choice

[@AloneForYears]

Hey man, I got an old ps3 gh3 guitar & I was wondering if you know how to fix the battery spot. Its springs are loose / fell off, so I’m wondering if that’s fixable.

[@Vobbo]

I can't remove the wooden thing that holds the rubber for some reason. It's completely stuck

[@thisislargemouth5566]

Also, 8 bit hold the line is an absolute banger.

[@Kurumi_Tokisakii]

Holy hell i literally broke my down strum like 3 days ago ur a savior

[@thezebiano]

Thank you so much for doing this video. I never knew about this and I was just about to buy a new guitar because I thought mine was too hard to press! I'll try these methods out soon... Kinda hyped!

[@soul6538]

Thank you for showing me how to open the neck of the guitar. I’m thinking about cleaning my buttons and changing the buttons around. Edit: button changing went great! And I’ll show my new buttons in a new video

[@isaiahheinzerling7932]

Hey I dont know if you remember answering my comment awhile back, but this was super helpful, and I cant wait for the next vid

[@mintylectable]

@ukogmonkey A tricycle is just a unicycle with training wheels

[@twistedyoyo20]

You took that from raccoon eggs

[@mintylectable]

@@twistedyoyo20 FINALLY SOMEONE NOTICED

[@tehbosaw2587]

I was just complaining to my buddy about how I hate using the Wiitar I just bought because of how stiff the buttons are. I’m for sure giving the safety pin trick a go this weekend. Much love, Ukog.

[@OneWakfu]

how to make your guitar eternal in 10 easy steps gamecenters hate him

[@clasherface7227]

Thank you so much my dude! I was trying to asking on stream yesterday actually!XD

[@clasherface7227]

Ukogmonkey thanks for the heart m8!

[@heathens3098]

Can I do this with an xplorer rubber thing?I know it has a different shape but do I have to do the same cut procedure?

[@Trisxd]

Can you make a video on taking apart the WoR guitar? I can't find anything for that guitar anywhere and I'm scared to break it

[@woosy3848]

you’ll need a Tork’s screwdriver for the PS2 guitars. I happen to have one. My PS2 Guitar was actually my first one that I opened up, and I also happen to break it one time. One of the wires were so worn and old that it came clean off of the board, now my wammy doesn’t work.

[@OniBurei]

GEORGE, a lot of the GH controllers I buy have extremely stiff frets when I push them down, like from the green to orange fret, it gets progressively stiffer and CREAKY, like the plastic is rubbing against the frets themselves causing friction and stiffness. I’ve tried at least 3 different GH3 necks and a lot of have the same issue, I’ve even tried carving some of the black neck plastic in between the frets but it doesn’t seem to solve it. I’ve been wanting to get back into GH trough CH and the Wii USB adapter but this has been my bane for so long. Problem might be too specific but I figured you might have experienced it at some point or another, what do you think? Stank you smelly much 🤙🏼

[@UKOGmonkey]

never had that specific issue before, what model guitar do you get? I would try sandpaper between the frets like what you were doing and also some wd40 to smoothen them up. Lube that hole and make it bigger! ;)

[@Rodneyxz]

I have a WTguitar (xbox360) since 2010, and 've been fixing all the problems it came since then.. I can tell that 'she' is very smooth to play on... I expect the magnetic/metal of the buttons dont stop doing their job, but they are starting to... So I'm doing the opposite way: putting some levels behing the frets... Nice 'tuto' BTW

[@javansonnier7183]

This is not my usual kind of youtube channel, but I really appreciate the guitar hero controller tutorial. I have a strum issue specifically, but it's still nice to see more information on the controller itself in general.

[@Andy251153]

The yellow button ridge actually helped me learn how to feel where I am when playing, I can't see myself playing without it 😅

[@deathstrokebro9550]

TIP: Some screwdrivers that are small can work to take out the screws from the neck and if you’re screwdriver if has a set of screw head things (lol) twist the screwdriver one is for taking out screws and ones for putting them in

[@Zantor]

Also, a tip, If you're a new player and are just beginning playing the game, this won't help you get better. This mod is for higher skilled players who are limited by the buttons, rather than hand and finger movements.

[@icedo1013]

I watched this on my Xbox so I want you to know and appreciate that commenting was a bit more of a chore than usual. However, I was watching this video and as I got to the end after being enthralled by the contents of the neck I was slightly disappointed that you didn’t cover the body; I was excited to see that part. I was tempted to move onto another video when something in my brain told me to watch your outro. It was here that you mentioned part 2 being out already if the video was more than a couple days old. I looked, saw the video was posted 4 months ago and instantly I was excited again because I knew it’d cover the body. I just wanted to thank you for putting that little extra bit into the video. I might not have seen pt 2 if it wasn’t in there. I’ve got it paused as I type this, I’m about to give it a watch as soon as I press enter.

[@dmtgoobz9721]

Ian Vansickle he covers the neck in a part 2

[@zuzo992]

Thanks Ukog...I made my only yellow button guitar :D

[@Plormby]

now the real question is where do you get the custom fret buttons

[@therevx5225]

Breaking your ribs while on the second lap of a 50 lap go cart race and still placing first is about the best conversion started I've ever heard

[@YoShibyl]

The fretboard mod with the rubber/silicone piece or whatever is helping me with hitting the TTFAF intro (Smash Hits chart). Thanks!

[@TurskoVideos]

For one of my Guitars, I actually had to take out the small rubber bumpers that each of the buttons had because they would constantly shift and cause the buttons to stick.

[@snottytoe6957]

remember kids, dont pierce your rubbers.

[@sherlin7953]

I know this video is insanely old, but was wondering if you had anything for when the buttons don’t register, back when I played Rock Band we would strap socks over the drum kits due to registry issues, is there anything safe to place where the rubber is to help with button registration?

[@RumpleGeist]

I've never been more excited. Oh boy. Clone Hero here I come.

[@buckitupbaby]

Love that this is in my recommended 4years later

[@PTIPPY]

Lol btw that's not rust, its the silicone they put on the connections to help keep water and other things from getting into them and also helps hold them in place. Just thought I'd share that because someone might get the wrong idea and think water damage or something is wrong. Its on all the guitars and usually only on the bottom screw.

[@Brikzilla]

I was at an arcade the other day and they had guitar hero, it felt so loose and fast compared to mine at home. Must’ve been sitting there since it came out so who knows how many uses it’s had.

[@hankhill2940]

Thank you! My fret board is a lot more smooth, can't wait for part two!

[@0rderSol]

Pretty sure you can probably just outright replace the membrane buttons with some Cherry MX Red micro-switches to give ease and longevity.

[@Cobalt985]

kailh choc switches are what acai's custom guitar uses but they needed a special PCB. I believe the reason they chose Kailh Choc switches over Cherry's low profile line is because of the way their frets sat on the switches. anyways, it's not just a drop-in replacement.

[@The_Mister_E]

I wonder if microswitches would provide any benefit? No travel. A little bit of tactile feedback. WAY more longevity. More consistent pressure requirements. Hell, you could maybe even customize the depression force if you look around.

[@theracingroo6885]

8:43 i hear that californication rhcp in the background

[@popsanddais]

a couple of tips that i have found really help! if you open up your guitar a lot buy a pack of lil 1cm cross head screws, this means you only need one screwdriver to do the whole thing and if one screw breaks you can just replace it. this one is for world tour/gh5 guitars only, take out the things on the head of the guitar and keep the screws around so if one of the screws holding the board on breaks you can just replace it (the screws work with les pauls and tour guitars i know that idk about the other guitars). Hope these help a bit :)

[@KrazzyKlown]

You can boil the dome switches to soften them rather than cutting them. I would also highly recommend using a ruler and sharpy to mark and measure your pokes/cuts instead of just free handing it. You will get a more consistent result. Probably would want to use a razor or xacto knife for the cutting too.

[@splinterftw]

Does anyone know how to fix wireless connectivity issue? my xbox les paul would disconnect everytime I'd press any button :(

[@sylthaya7571]

New batteries

[@ActionHank]

The White Xplorer guitar requires a T10 in order to remove their special screws as well a phillips head screwdriver for the inside parts :-)

[@BenignStatue71]

Guitar Hero World Tour for PS2 has a detachable neck too, iirc. You can mount a neck with a slider or just the buttons.

[@mrxi3540]

What kind of screwdriver is that? I got a GH5 Wii guitar and i've tryng unscrewing my guitar with all of my screwdrivers, but all of them its not fit well🤔🤔😭

[@ToddJasonFilms]

All I did on my red SG PS2 guitar was replace the solid color buttons with the ones with the black centers (Wii Les Paul that was broken) and it's soooooo much better, they're slightly smaller than the solid color buttons so they have a looser feel and press to them.

[@Nixon9000]

something of note, be careful when you screw your neck back together. If the cables aren't set properly you could put a screw through them and your guitar wont be very useful after.

[@xVDRx]

The midi version of Enter Sandman reminds me of the SNES version of Maximum Carnage. Huge nostalgia bomb

[@RitzDx510]

I remember modding my first ever guitar hero guitar and *I striped the outer screws while modding the frets*

[@tuckerducker8907]

Little tip, if you are worried about the screws getting stripped replace them with the same style screws but better quality

[@dustinmartin648]

So I know this was a year ago but can ANYONE help me? I'm trying to change the color of my buttons and I just popped them out and spray painted them real quick but unfortunately when I get to playing and sliding the paint starts to warm up and gets tacky. Like, I literally play worse now because I can't slide up and down the frets like I used to. Any tips and/or different kinds of way to color my buttons without losing any slide potential?

[@just1morejonjr]

Dude... Is that an 8-bit version of Toto's "hold the line" I'm hearing?... Awesome 👍

[@AdamBoruffG]

The PS2 guitars do detach, I know this because I have a ps2 Kramer that detaches

[@musiscarrinu3470]

"it may sound like i have a cold, but its not that, I BROKE MY RIBS"

[@hpwonders123456789]

They sell special drill bits for removing stripped screws if you do accidentally round them while trying to do this mod

[@drsnake77]

UKOG FOR PRESIDENT

[@Gelato__33]

Torx screwdriver is size T8. And i know for a fact that the Xplorers DO use torx screws on the outside

[@alphabrother6823]

Hi George. Glad to see you’re doing better. Hope to see you more

[@nolldavis24]

QUESTION! My star power just stopped activating with tilt...any suggestions on what I can do?? Its an Explorer. Thanks!

[@UKOGmonkey]

It's probably broken D: not sure what to suggest there sorry!

[@bobsauce3477]

Thanks dude this was such a help and i just wanna say love your content ❤

[@averiethepuga4078]

thanks for making this, my guitar's fret sometimes lag/stick in the game, might clean it out or something

[@aidenabernethy5189]

Thanks UKOG I fixed my rock band Stratocaster!

[@nutty232]

Where can I get Guitars?

[@helloiamdoge7913]

Ebay or there is a good wii guitar on amazon you just need a raphnet adapter

[@jaj145]

I know they dont seem to be as popular in the community, but any chance of a rockband strat modding video/series?

[@Volbeat1117]

I like this idea

[@zacharyomega7242]

5:13 ukog shut up I want to hear hold the line LOL

[@zwiemon]

Maybe if you put a tiny bit of some sort of glue on the edges of where you cut the rubber won't tear as fast

[@gabrielmireles770]

That 8-bit song is Hold The Line by Toto

[@DJ7777BPM]

This is just what I needed, thanks a bunch!!

[@Tegridyvs]

If you were to clean the green side of the little board would that help with the problem of when pressing down your button it cuts in and out during game play? I can’t tell you how annoying it is to hit a chord and it just cuts off because my button cuts in and out

[@ceej6311]

I've always wanted to mess with my buttons, thanks George

[@VacantSpirit]

i dont know why but my RED buttons connection keeps disconnecting for 1ms and it sucks any idea to fix?

[@UKOGmonkey]

Put cardboard on paper down the side of the neck to make it a tighter connection, I'll do a vid eventually to show it easier, or ask me on stream!

[@VacantSpirit]

Yes but it doesnt help enough for some reason ive used that for like 6 months already

[@americanShurtugalEntertainment]

I wonder if you could make a mould and manufacture the rubber bits

[@Brzzzyexe]

with cutting the rubber, less is more, i'm lucky i have a spare guitar for doner parts but after using it with 2 little slits and a poke, it felt less responsive like an arcade guitar

[@samquilter8300]

Its either a T15 or a T20 screw driver I think, T20 speaks to me stronger though. if you round it out just use an alan key.

[@user-vv7gt2hu7p]

It's torx 10

[@bretdunker1252]

Just wondering. The guitar in the thumbnail, how would you paint on the letters

[@GoatedSauce04]

I have one of the old exbox 360 stratocasters. It's even got the lower neck buttons that are closer together and are way easier to solo with. Anyway, those are some nice tats Ukog.

[@loweffortproductions1985]

I love your Scissors!!! Did Adelaide sell them to you?

[@BouncinBrandon]

I'd make frets again for you personally np, I'll let you know when I'm in a position to do that. There's a chance I'll make them again for the public but no promises.

[@juno2317]

Bro, this is late as hell, but I've already modded 2 of my guitars.

[@Radtastical]

I used the shave down the notch on the yellow button as a kid

[@mink5051]

You know it’s funny cuz yesterday I literally was fixing my guitar wish I saw this video