How I turn a live edge Winged bowl from laburnum.

In this video I turn a Live Edge Winged Bowl from a stunning piece of Laburnum. #liveedgewingedbowl #laburnum #latheprojects #woodturningprojects #woodturning #woodart

[@ThePapa1947]

Ad beautiful piece of wood Will. Not sure there is any growing around here. Great job of turning and a pleasure to watch. Keep up the great work my friend, Gary

[@William_Kenny]

It's not too plentiful here in Ireland and hard to get any a decent size, but it's a beautiful wood to turn, appreciate you taking the time to watch, Kind regards From Will 👍

[@racheldray1057]

You, Mike Holton and Tomislav Tomasic are my favourite turners. Love your work and your videos. That laburnum is absolutely stunning.

[@William_Kenny]

Rachel that's very kind of you to say I'm humbled, appreciate your support, Cheers From will 👍

[@DougMilleratWoodSpunRound]

Another beauty! These winged bowls from a crotch section are beautiful anyway, but the laburnum really likes to show off. Great job William.

[@William_Kenny]

Thank you kindly doug it's gorgeous wood for sure, Cheers From will 👍

[@greenhavencreat7178]

Very nice, William. Beautiful wood

[@William_Kenny]

Thanks very much Brian, definitely one of my favourites 😊👍

[@robertbourke7935]

Lovely work William

[@William_Kenny]

Thank you kindly robert 😊👍

[@DavidBird-uu8km]

Very nice, both bowls turned out great , the oil finish really brings out color and grain of the wood. Thanks for a great video.

[@William_Kenny]

Thanks very much David glad you liked it, Cheers From will 👍

[@albertdawson6814]

Very nice piece, and your video was very enjoyable. Thank you for sharing. I hope I see you on the next one

[@William_Kenny]

Thanks very much Albert appreciate your support 👍 Kind regards From Will 😊

[@WeeVal]

Wow they both lovely Willie! 😃

[@William_Kenny]

Thanks very much Val👍

[@davidvaughan2838]

Superb, thanks for sharing William

[@William_Kenny]

Your very welcome David I appreciate you watching mate, Cheers From will 👍

[@eamonkenny3324]

Great job again Bill it's a fantastic piece

[@William_Kenny]

Cheers buddy thanks for watching, Bill. 👍

[@alangibb3100]

William that turned out smashing mate, I really like turning Laburnum and you always seem to great a great finish with it. Well done.

[@William_Kenny]

Thanks very much Alan very kind of you to say, appreciate the support buddy 👍

[@rwyse1]

Very nice William

[@William_Kenny]

Cheers buddy thanks for watching.👍

[@woodywoodturning]

Lovely peice of lubernum . Thanks for sharing.

[@William_Kenny]

Thanks very much Mark laburnum is such a beautiful wood to turn thanks for watching mate, Will 👍

[@brentbeacroft3363]

Another amazing project Will. Keep them coming buddy

[@William_Kenny]

Thanks very much Brent i enjoyed turning that piece, Cheers From will 👍

[@kevinanneb6874]

Gorgeous work. You have a great eye detail.

[@William_Kenny]

Thank you kindly I was lucky to find this gorgeous piece of wood appreciate you watching, Kind regards From Will 👍

[@annlaurie1484]

Lovely piece, you made it look very easy. 😊

[@William_Kenny]

Thanks very much Ann, I've done a few in past but always room for improvement, appreciate you watching, Kind regards From Will 👍

[@barrychitty7782]

Brilliant piece of turning William as always. I have a piece just like that I think I will try that it’s a bit small should be interesting

[@William_Kenny]

Thanks very much Barry, give a go, would love to see the result, Cheers From Will 😊👍

[@patricksweeneydesign6093]

Love rhe interior depth, like an emerced bowl . Beautiful work.

[@William_Kenny]

Thanks very much Patrick I was very happy with this piece, Cheers From will 👍

[@ianthemonkeyhangerturner]

lovley workmanshio will

[@William_Kenny]

Thanks very much Ian 😊 👍

[@BBTurning]

That is beautiful William mate and great call on the tennon. There is not sense it allowing a piece to fly off of the chuck to gain a half of an inch in depth. Shay

[@William_Kenny]

Thanks very much shay, always better to be safe than sorry, thanks for watching mate, Kind regards From Will 👍😊

[@hbwoodturning17]

That is a nice set of laburnum bowls that you turned Will, it is a beautiful type of wood, but it is very hard to work with

[@William_Kenny]

Cheers mate thanks for watching it's much appreciated, it takes a delicate touch sometimes to get a good finish but when it happens it's well worth it, 👍 but there's an odd time it goes wrong for me😂

[@Winterbourne_wood_turning]

Great job with an awkward piece of wood. I have just picked up half a dozen big lumps of very green Laburnum but a little wary as I have heard that it is poisonous and dangerous to turn.

[@William_Kenny]

@@Winterbourne_wood_turning Thanks for watching its much appreciated, laburnum is toxic but if you take precautions, Good dust extraction and wear a respirator or a good quality dust mask👍

[@dennisyorde6111]

Good job it looks very good

[@William_Kenny]

Thank you kindly Dennis appreciated 😊👍

[@danslejardindecytrus]

Very nice work! 👍✨

[@William_Kenny]

Thanks very much 👍🙂

[@danslejardindecytrus]

@@William_Kenny 🙏🙏

[@MoleValleyMaker]

I scored a good few bits of Laburnum and the bugs seem to stop in the sapwood and not venture into the heartwood. Great piece!

[@William_Kenny]

It's beautiful wood you'll enjoy turning it, thanks for watching mate much appreciated, Will 👍

[@mashmade-airth]

À pure belter William. I've not got the nerve to try a piece of crotch or pretty much anything with 'sticky out bits'. Suppose I should man up & try. I have a dedicated workshed microwave. Would that deal with any wee beasties or unwanted visitors in a piece of wood if I were to give it a ping for a bit ? 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@William_Kenny]

Thanks very much Jim, give it a try you'll do great I'm sure, and definitely a few quick blasts in the microwave will sort out the inhabitants 🙂 Cheers From will 👍

[@mashmade-airth]

@@William_Kenny thanks Will 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@MikeHolton]

Hi Will, beautiful bowl . . . . again! Thanks for the shout out as well, appreciate it. Message me your address, I would like to send you something to turn.

[@William_Kenny]

Thanks very much Mike that's very kind of you, Kind regards From Will 🙂👍

[@racheldray1057]

Yay! I'm looking forward to seeing that.