In this video I go over a couple different ways and settings I use for the Chase Bliss Audio Mood.
Пікірлер: 27
@JasonBrockStick2 жыл бұрын
Great job… I use the Mood for specific reverse delays but your helping me open it up further!
@CaseyTomberlin2 жыл бұрын
Thank you! I’m so glad you found this helpful!
@m.g.kroger3 жыл бұрын
Very nice from you to share so many suggestions, it's inspiring!
@CaseyTomberlin3 жыл бұрын
Thanks you ! I’m glad you found it helpful!
@jackduxbury16323 жыл бұрын
Awesome video mate.
@CaseyTomberlin3 жыл бұрын
Thank you sir! 🙌🏻
@john808welk3 жыл бұрын
Love it! I really gotta get a midi box so I can use my MC6 with Mood. Seems like it would open up a lot of possibilities.
@CaseyTomberlin3 жыл бұрын
Oh for sure! It’s great to be able to dial in a wild sound/setting and be able to pull it back up at any time. The two on board presets can be very limiting very quickly.
@lcglazer2 жыл бұрын
Can the right side of the pedal be an always-on looper, like it'll play a phrase while listening to a new phrase and then playing that one? Also I see if you turn down the clock, the loop gets slower, lower pitched and more lo-fi. If I first set the clock to a lower quality before I record, then engage, will it immediately be at that slow, low pitched, lo-fi sound? (It seems this effect can only be achieved by recording and engaging the switch, then turning CCW the clock knob.) Thanks!
@CaseyTomberlin2 жыл бұрын
Hey Icglazer, you will have to re engage the looping side to start a new loop. I have heard you can hold it down to record something nee but I haven’t tried that out yet. The clock knob controls the overall “length/quality” of everything. Lower clock gives you longer loop time, delay time, reverb decay, but also lowers the quality. If you loop something and adjust the clock, it is changes the loop in 5ths and octaves depending if you go up or down in clock speed.
@LoVeAmBiEnT3 жыл бұрын
When the ventris Reverb comes on... Nice
@LoVeAmBiEnT3 жыл бұрын
Which Reverb setting is your favorite on the ventris? Because in this video after you turn on the Reverb I can't even tell you how epically beautiful that sound was
@CaseyTomberlin3 жыл бұрын
I like the hall with room type set on the largest size or the E-Dome. Use those two a lot
@lcglazer2 жыл бұрын
@@CaseyTomberlin Do you prefer your dual reverbs parallel or in series? Like did you mean hall into room?
@CaseyTomberlin2 жыл бұрын
@@lcglazer I don’t usually run dual reverbs on the ventris but when I do it’s usually a smaller into a bigger reverb. I think what I meant to say in the comment was the “hall” reverb engine set on the “edome” room size. In the software you can choose from 4 -5 different sizes.
@yannismouhoun93413 жыл бұрын
Thanks for this. Very helpful. Is it only MOOD here, or were you using other pedals ? Also, which amp ?
@CaseyTomberlin3 жыл бұрын
Hey glad you found this helpful! It is just mood for 90% of the video. I turn on a big reverb and delay with my ventris and nemesis at the very end to show how I would use it in context.
@CaseyTomberlin3 жыл бұрын
Also I’m running into my HX stomp running stereo amps.
@rhcpschipper3 жыл бұрын
In that last piece you play here you mention you use the ramp function on the mix control, right? Is that already programmed in the preset you are in? Or are you controlling the ramping any other way? Sorry, but I find the whole dipswitch thing kinda confusing.
@CaseyTomberlin3 жыл бұрын
No problem at all Tim. I am controlling the ramping of the mix knob with my iPad. You can do this via the dip switches but I use this alternative way to ramp two knobs at different speeds.
@rhcpschipper3 жыл бұрын
@@CaseyTomberlin with the Ribn app I suppose? Really want to mess around with that too.
@CaseyTomberlin3 жыл бұрын
Yes! The Ribn app is really easy to use with it. There are some others out there but Ribn made the most sense to me.
@rhcpschipper3 жыл бұрын
Thanks for this great video. Love to get new inspiration for using my Mood. Are you using the dipswitches here? Loved it!
@CaseyTomberlin3 жыл бұрын
I have the trails switch engaged but I’m using my midi controller to activate presets with ramping features
@rhcpschipper3 жыл бұрын
Casey Tomberlin Thanks!! Really like what you do with it.
@earthboy13103 жыл бұрын
What dipswitch is on?
@CaseyTomberlin3 жыл бұрын
I just have the trails dip switch engaged have spill over from the OBNE side.