How many 346xp’s can one man have?

Рет қаралды 401

Drew’s creations

Күн бұрын

Пікірлер: 25

@Aaron_A_Lynch 2 жыл бұрын

Awesome little saws 🤙🏻😎

@justinweaver8787 2 жыл бұрын

Great 346 collection brother thanks 4 sharing.

@drewscreations8551 3 ай бұрын

@@justinweaver8787 would love to have one but haven’t found one

@hearttraveler1548 2 жыл бұрын

Great video & saws, thank you ! Out west we run 346 with 3/8 pitch skip tooth chain and 20" bar , awesome thinning saw :-)

@grayclapp1081 2 жыл бұрын

Good looking saws!!

@drewscreations8551 2 жыл бұрын

Thanks buddy

@kevinjones2667 2 жыл бұрын

What tips would you give for a first time port job?

@drewscreations8551 2 жыл бұрын

Clean work area, clean saw, get you a notepad and mark everything down, measure everything including squish before you even take the saw apart, once you get your numbers down, decide where you want to go with the saw, use the piston ring and mark your new numbers onto the cylinder with a marker or sharpie, draw out all your ports if you are widening, and don’t grind too much too fast is the main thing, you can always take more but can’t add it back, grind slow, let the tool do the work, when finished, MAKE SURE YOU HAVE GOOD CHAMFERED PORTS! Feel them and make sure they aren’t sharp! They will snag a ring! Make sure your exhaust roof isn’t flat on top either!

@drewscreations8551 2 жыл бұрын

Retime everything when you think you have it!

@kevinjones2667 2 жыл бұрын

@@drewscreations8551 thanks brother.

@kevinjones2667 2 жыл бұрын

@@drewscreations8551 I'm nervous as hell to do it 😆 🤣 😂

@drewscreations8551 2 жыл бұрын

@@kevinjones2667 if your saw is a common model and you can buy a cheap aftermarket cylinder, buy you one and set your good oem one to the side, port the aftermarket one until you get used to it and get it how you want so that way you don’t ruin your good cylinder. That’ll help a lot. Grinding isn’t as easy as it looks. Anyone can grind, but making them look good and perform are the big challenges