How to 3D Print a Deadpool Helmet! Printing Tutorial

[@SaturdayMorningProps]

20%off all do3d.com files with code: SMP20. If they are running a deal the code becomes that as well!

[@macmi11i]

I just started the hobby a couple weeks ago, thanks for the tips!

[@SaturdayMorningProps]

@@macmi11i Happy to help 🤘 and welcome to the hobby!

[@PokProps]

Deadpool print guide LETS GOOO. I haven't thought about printing things off to the side.

[@SaturdayMorningProps]

@@PokProps haven't seen really anyone doing that

[@RaySchrantz]

Thank you! This is my first helmet and I was watching your video on sizing and tried using 3D builder and the size 4 head, but couldn't quite get the helmet to fit with enough confidence to risk printing it yet. I'm planning on scanning my head to scale it, but these printing tips are so useful!

[@SaturdayMorningProps]

@@RaySchrantz happy to help 🤘 wasn't sure if this video was necessary but figured why not

[@DavidPrintGallery]

Printing on the side is genius!

[@SaturdayMorningProps]

@@DavidPrintGallery it definitely gives it an insane finish but needs a tad more support

[@sei161]

Dude i would love to see a White Blaster Beetleborg build from you. That'd look so awesome

[@SaturdayMorningProps]

@@sei161 red is almost done then we will see

[@dudepoolofficial]

Genius thanks for the video. Can’t wait to show the world my 3D printed weathered mask 👊🏻👌🏻

[@A_Wispy_Cloud]

I never thought to put a mask on its side but it looks great

[@SaturdayMorningProps]

@@A_Wispy_Cloud I really like how it turns out, but the bambu really does a great job vertical

[@A_Wispy_Cloud]

@@SaturdayMorningPropsit’s a great idea to mediate the ringing at the top of the helmet

[@mrtalalaa]

Currently doing mine but having to do it in sections instead of one head purely because my p1s doesn’t have the height, unless I’m doing something wrong

[@SaturdayMorningProps]

@@mrtalalaa if it's at 100% scale you can lean it back then rotate it 45% diagonal and right click then hit center. It should fit. The one on the A1 in the video is at 102%

[@LogenProof]

Thanks! The 3d model from do3d has on the main helmet "cheeks". Different from what you're printing. which model are you using? Also, could you show how you lay it on the side - the exact angle and a bit more info on the support?

[@MagnoTubertine]

What is the link for the red so we don't get the wrong tone?

[@hitman2481]

What print setting do you use for Bambu and how do you do your supports? Painted on? Or auto? I’m new to printing helmets. 🙏🏻🙌

[@SaturdayMorningProps]

@@hitman2481 .16 optimal, and default settings. I paint on supports because I know what does and doesn't need to be supported. But the default angle should get you success most the time, sometimes will support too much wasting filament

[@jeffcaplan8263]

I'm also having issues fitting it on my Bambu P1S. Any tutorial getting it to fit for us 3d printing newbys? And thanks for the discount code!

[@SaturdayMorningProps]

@@jeffcaplan8263 what scale are you trying? I also have a discord with a 3d printing advice section

[@johnhad74]

PUT THE 3D DEADPOOL MASK MODEL IN THE DESCRIPTION!!!!!

[@Emjayography]

thee problem a smaller printer Ai mini the middle is cut in half trying to figure out what i can use

[@_Mourning_]

What would you say the total cost to print this mask is, fully complete with magnets?

[@mac2cool93]

Dude great video brother may have to try the side technique

[@SaturdayMorningProps]

@@mac2cool93 definitely doable with those elegoo max volumes

[@mac2cool93]

@@SaturdayMorningProps oh yeah and the details would stay too great video for orientation

[@dalenesbitt2491]

Good video man. Can I ask, is it 0.16 High Quality or 0.16 Optimal? Did you adjust the Speed at all?

[@SaturdayMorningProps]

@@dalenesbitt2491 .16 optimal and no I just let the Bambu go default, on a k1 max I slow it to stable

[@MatheusFelipe-ki1mx]

bro i love you and i love your channel

[@SaturdayMorningProps]

love you too

[@JokerGames818]

Variable layer height that’s all you need to know

[@ezloot4u433]

Excellent 😊

[@SaturdayMorningProps]

@@ezloot4u433 hope it helps 🤘

[@divine_masculine69]

the link in the description for the filament you used does not work, can you post it again pls🙏🏿😁

[@Stangfan78]

Thanks for the info. Do you have a link for the magnets?

[@SaturdayMorningProps]

@@Stangfan78 in my linktree

[@KITT-K2000]

What printer do you recommend between the Bambu A1 combo and the K1 Max, here in Quebec Canada there is a 400$ difference. I whant to print helmetsfor me and sell. Thank for sharing your tips. I curently have a anycubic chiron and mega 3 but never printed a helmets with them and i want something newer and better.

[@SaturdayMorningProps]

@@KITT-K2000 the A1 is amazing honestly

[@SynysterGoose]

What is your thoughts on that sunlu filament splicer?

[@SaturdayMorningProps]

@@SynysterGoose haven't got to try it yet. I'm hopeful for it though

[@superbatzbatazr7723]

You know them haunton mansion still around

[@dillybopp9217]

What printer do you use

[@PauCa98EpicGames]

Hi! You really don't use support for the center spot? I have a lot of printing failures right there

[@SaturdayMorningProps]

@@PauCa98EpicGames domes print fine with out supports, not sure what could be causing your issue

[@Jb0ss016]

Can you do a tutorial for the Spider-Man/venom helmet🙏🏿

[@SaturdayMorningProps]

@@Jb0ss016 this is doing pretty well so I can try to add one in 🤘

[@BnR_Tech]

How much filament in grams does it usually take for you to do the main piece wondering if it is good or bad that it takes like 550g for just the main piece?

[@svn_liam856]

Hi how many magnets did you use

[@SaturdayMorningProps]

@@svn_liam856 every other slot

[@TheHelicapt]

Do they even make the .16 hot end for the Bambu x1 ?

[@SaturdayMorningProps]

@@TheHelicapt not sure what you mean, you may be confusing quality with hot end, you select .16 resolution while using a .4 nozzle

[@TheHelicapt]

@@SaturdayMorningProps Ahhh..sorry your right.

[@sloshedmrbones]

Do the supports need to be on both side edges like the cheek area?

[@SaturdayMorningProps]

i do, i like to support the magnet edge and the textured edge

[@sloshedmrbones]

@SaturdayMorningProps that's what I thought, but when I painted them on, they looked like they were still floating. Your support settings are normal, snug and bed plate only correct? Think this just solved my issues. Going to find out this weekend.

[@SaturdayMorningProps]

@@sloshedmrbones I change the style of snug to renticular grid

[@danielroth20]

another banger.

[@SaturdayMorningProps]

Thanks daniel!

[@ruisaraiva9717]

Do you sell your files with the modifications?

[@SaturdayMorningProps]

@@ruisaraiva9717 no, never sell files you didn't actually make

[@vdblu77]

I am trying to print this now and I just couldn't get the main piece to fit on my P1S. I had to size up mine to 110% to fit my head... I guess my head is just too big. I had to use your file where it splits the main piece into 2 pieces... now I need to sand the points that touch down flat and glue them I suppose?

[@SaturdayMorningProps]

@@vdblu77 yeah I think max that will fit is 102-103% on a bambu, honestly the bambus are so accurate you may not need to sand the connections. And the magnets should help hold the connections

[@vdblu77]

@@SaturdayMorningProps Ok, I got it built at 110%. it Looks amazing! I installed magnets in all the spots but they dont hold together very well. Should I be gluing the mask together in a few extra spots? I was thinking Chin, top, back and left side/eye together, then the right eye/side together. Do you have any trial error and recommendations?

[@SaturdayMorningProps]

@@vdblu77 I've never glued the sides together so I can't really say, I've added nylon to the top of the pieces as a way to hold it from falling completely apart. I'll make a short

[@jacoboduque5337]

@@vdblu77can you tell me the diameter and tall measures of your head? So I can have a reference for scaling

[@jamesvandromiv8406]

The eye mesh keeps failing for me. I'm using bambu p1s. What settings do you use? Any help appreciated

[@SaturdayMorningProps]

@@jamesvandromiv8406 make sure you are doing manual supports and paint the under side of the lenses

[@insuranceguy4964]

What, supports do you do for the larger part. Of. The helmet?

[@SaturdayMorningProps]

@@insuranceguy4964 I use snug usually when I don't have to use trees

[@ThirtyEighT_38]

I have to print the version without the chin since I have a Neptune 4. How should I position the top piece? Thanks!

[@SaturdayMorningProps]

@@ThirtyEighT_38 what's the build volume is it a Neptune 4 pro? I didn't love printing the split version, you have to support the little magnet arms a TON, had lots of fails with that version

[@ThirtyEighT_38]

@@SaturdayMorningProps it’s a normal Neptune 4 so it’s 225x225x265. Everything went well on my first print until the back of the piece had to connect with the magnet arm, I’m really lost on that part…

[@SaturdayMorningProps]

@@ThirtyEighT_38 are you in the discord? we have a 3d printing advice secton

[@ThirtyEighT_38]

@@SaturdayMorningProps nopes, will join it 😁

[@sherinedias]

Is it possible to print this on a bambu lab A1 printer?? 100% scale?? In any orientation??

[@SaturdayMorningProps]

yes if you look at 2:11 im printing it at 102% on the a1

[@sherinedias]

@@SaturdayMorningProps Thank you so much i made mine and had to split it. will try it this way now. Again thank you so much.

[@chinogaming2022]

what size magnets did you used?

[@SaturdayMorningProps]

@@chinogaming2022 at 100% I like 7*2 mm at 102% I like 8*2mm

[@Augui]

Hello, I printed this helmet a lot trying many variants, your video is very good and helps a lot, I want to tell you that one of the best ways that worked for me is to print it all in one piece with pla flex.. I found it super comfortable and easy to place and I saved the magnets, it is quite difficult and it was an impression of 77 hours but it turned out very well, you can try it, greetings, I am from Argentina, sorry if I don't understand something, I am using Google Translate

[@SaturdayMorningProps]

@@Augui did you cut a slit in it? Flex PLA isn't that stretchy so idk how you got it on 🤣

[@Augui]

@@SaturdayMorningProps I printed the entire mask except the back cover in pla plus flex, from the 3n3 brand, and it looks incredible, that filament from that brand is not like the pla flex of another, it is a little more rigid, if you want, I will send you photos

[@SaturdayMorningProps]

@@Augui without the back makes sense

[@LukasSchou]

what kind of printer do you use for them you can't make links to them😊

[@SaturdayMorningProps]

@@LukasSchou I have the A1 seen in the video linked in my linktree

[@j.a.o.9395]

What infil do you set for the k1 max ?

[@SaturdayMorningProps]

@@j.a.o.9395 8% gyroid or adaptive cubic

[@SurRides]

do you think it will print on the cr10 se

[@SaturdayMorningProps]

@@SurRides 1000% first time I ever printed it was on the cr10 v2

[@DonkeyKicksVh]

Would any of this matter with tree supports?

[@SaturdayMorningProps]

@@DonkeyKicksVh what do you mean would they matter?

[@DonkeyKicksVh]

@@SaturdayMorningProps like would they fall over, would the chin still be messed up etc.

[@SaturdayMorningProps]

@@DonkeyKicksVh no you should be fine, I like tree sometimes but tree supports fall over way more often than snug

[@SaturdayMorningProps]

@@DonkeyKicksVh no you should be fine, I like tree sometimes but tree supports fall over way more often than snug

[@superbatzbatazr7723]

I can't find the video

[@hellalike]

dude....is that a battle droid?

[@SaturdayMorningProps]

@@hellalike yeah I need to make a video on it

[@Landeux]

Cant have it fit on my EN3P with support scale 95% help pls

[@SaturdayMorningProps]

@@Landeux buy the version that has the chin separated from the dome and you might be able to fit it

[@Landeux]

@@SaturdayMorningProps i end up printing that version. Now i scaled down to 95% im guessing the 8x2mm magnets won’t fit anymore

[@SaturdayMorningProps]

@@Landeux definitely not

[@Chato829]

Hello fellow trend chasers, see you at the race to the bottom 😂😂