I FINALLY made a DEADPOOL mask (3D Printed helmet), Full Tutorial

Been wanting to do this project for a long time and finally got around to it. Let me know what you think!
Tiktok: / johnsprintlab
Products used (affiliate links):
Magnets - amzn.to/3yIL43H
Eye Mesh - amzn.to/4c1xt5c
Filler/Primer - amzn.to/4caV0AU
Paint - Red: amzn.to/4c5ysRT Black: amzn.to/3WnQpFp
Sandpaper - amzn.to/4fo02Na and amzn.to/4fgb3QB
Clear coat: amzn.to/3Wk4UKx
Files: / yoshstudios
#deadpool #3dprinting #cosplay #propmaking

[@leonardoperalta2932]

EXCELENTE TUTORIAL !!! congrats

[@abrarishraqarnob8619]

Honestly this is the best Deadpool mask i found all over the whole internet man you deserve more likes

[@BobCatinazzo]

Man this was tremendous stuff!!!!

[@wakasanbodi4238]

love the way the mask turned out., definitely gonna use it as a reference

[@Gomeyy]

I’ve been hesitant to get back into 3D printing ever since my X1C had issues but been reinvigorated. The PC fan cover is a trick I haven’t seen before and it makes so much sense going to def use that in the future

[@JohnsPrintLab]

Printer problems are no fun but hopefully it's smooth sailing for you from here on out!

[@Jerbear0506]

I’m getting ready to print a variety of these helmets and I never thought of using pc fan filters for better visibility. Thanks for the information!

[@ThaGoodRhino]

Great video! I just ordered the mitre apel glue AND the white computer vents - thank you!

[@JohnsPrintLab]

Have fun!

[@nastrodomis]

ditto

[@Kalenth]

Awesome build! Thanks for the detailed breakdown of the print settings. It’s weird how everything is becoming so organic looking…

[@Spikex1]

In my experience with Yosh Studios files, resin printing the eye gets the super fine detailing of the mesh, and then spray painting the inside of the eyes black (or really any other dark color) helps preserve your sight very well. The black color facing towards your own eye gives much, much better contrast against your average surroundings than if it was just the color white facing towards your eye.

[@JohnsPrintLab]

thats a good idea. Im too attached to the simple fan dust covers to do anything else though lol

[@HorrorG.]

FINALLY! Thank god you FINALLY made one. Our lives were all on hold until you did this

[@JohnsPrintLab]

Happy to help! Glad you can FINALLY move on with your life!

[@andyb7754]

Very, very nice project. That helmet turned out great. I'll have to try and make one for my grandson. One thing I'd have you different is, wear gloves when priming, sanding and painting. Your hands have body oil on them (no matter how clean you have them) and it can affect the paint. Rubbing your bare hands on anything before sanding and painting is not recommended. Thank you for your time and video.

[@JohnsPrintLab]

Solid point for sure. I live in the midwest and the humidity and summer heat makes me not want to wear anything let alone rubber gloves lol. Good luck with your build!

[@DazDroAnimations]

You have a very lucky grandson 👍

[@B3N1215]

Amazing video man you deserve way more than 760 subscribers keep going❤😅

[@thehappypittie]

great video

[@ruisaraiva9717]

Well done. 5 Stars. Do you sell de files?

[@JohnsPrintLab]

The files are from Yosh Studios

[@GawdDAMM_it]

This was so cool! I need one now!

[@ryanlevin3459]

Great video! Do you think there is a way to slice the helmet into smaller sections to be able to print on the A1 mini? Then just glue those pieces together?

[@JohnsPrintLab]

yeah absolutely. might need a little bondo to hide the seams, but should be doable.

[@Sibanamush]

Helmet looks great! I think the "fabric" texture of the red part held onto the black wash just a little too much on the top though

[@JohnsPrintLab]

agreed. It does look better in person than on camera though so that's a plus.

[@genises200]

If you put sem line in the back it can help hide a lot of the layer lines

[@neil12]

How’s the breathability? I only skimmed the video, I plan to come back and watch the whole thing so apologies if you answered in the video. Is there airflow through the eyes?

[@JohnsPrintLab]

Yeah the eyes have holes so there is some air flow, but it is a solid plastic helmet so it can get warm.

[@TheHelicapt]

Did you scale the mask down to figure out the bed?

[@JohnsPrintLab]

Nope its the same size Yosh made the STL file.

[@fariskhayat]

What ratio is good for the wash

[@_MandoCalrissian]

thats reallyyyy cool. how do you scale them to you

[@JohnsPrintLab]

Luckily this file is scaled to a 24" head so I didn't have to do anything. If you don't know how to scale though, there are plenty of videos already made on the topic. Happy printing!

[@fariskhayat]

What ratio is best for the wash

[@douglaswoodard3412]

try nulin oil from GW its amassing and would be good for the wash

[@Toast.78]

Wonderful video,can't wait to make this myself. As a question, what printer are you using? And also what bed size do you recommend?

[@JohnsPrintLab]

I use a BambuLab P1P and love it. I started with an Ender-3 and just having the little extra bed size of the P1P is a massive improvement. I wouldn't go smaller than the P1P bed for helmets which I think is 235mm.

[@ezloot4u433]

How did you add the 3 helmet pieces to one build plate? Thank you. Nice video

[@Boodster61]

just drop it onto you plate but make sure you have print all at once turned on

[@JohnsPrintLab]

I just drag them to the same plate or drag each STL file into orca. If you click each STL it will open separate instances of the slicer.

[@edi772427]

Hey, where did you get your stl files from? Is it the Do3D one?

[@JohnsPrintLab]

These are from Yosh Studios. You can sub to the patreon or buy the STLs on their Etsy shop I believe.

[@teamgreybeards8368]

DEAPOOL tumbnail FTW

[@waldogtv5486]

Where is this file from??? A link would be great!!!!

[@JohnsPrintLab]

Yosh Studios patreon. Can also get it on their Etsy I believe.

[@markdobson2225]

incredible pal,what printer do you use ?

[@JohnsPrintLab]

BambuLab P1P

[@jrbizzle1832]

Do you think you could do that black wash look without initially painting the helmet? Say you printed it red and just did the black wash

[@JohnsPrintLab]

oh yeah for sure. Might look into dry brushing as well depending on the look you're going for.

[@A_Wispy_Cloud]

Do you have any tips on how to minimise/eliminate warping it is the one thing I haven’t got dialed in.

[@A_Wispy_Cloud]

This is my first vid of yours that I have seen but I really enjoyed the vibe of the vid 👍🏽

[@JohnsPrintLab]

What do you mean by warping?

[@A_Wispy_Cloud]

My prints keep bending up from the build plate

[@JohnsPrintLab]

@@A_Wispy_Cloud oh ok. This is usually an adhesion issue. Make sure the bed is clean with dish soap. Try adding a brim to your print, or raising the bed temp 5°

[@A_Wispy_Cloud]

@@JohnsPrintLab thanks will try this hopefully my prints come out better

[@genises200]

Do3d and Yosh release almost the same masks every month. Do they copy each other?

[@JohnsPrintLab]

They both make files in the same genre so there is bound to be some overlap especially with the trending topics.

[@ChristianRocker]

I’ve had the same issue with the supports coming off in the back

[@JohnsPrintLab]

It is very annoying. Hope you got it sorted.

[@gcmehojah]

You can just use brims and they beef up the tree supports.

[@taze-1106]

Where’d you get the file from?

[@JohnsPrintLab]

Yosh Studios patreon. Can also get it on their Etsy shop.

[@genises200]

I have problems finding strong magnets

[@Figglebottom_fumbler]

Thats Monkey Aids

[@spoonyanimates9841]

Anyone have a link for the magnets? I cannot for the life of me find it.

[@JohnsPrintLab]

In the description Magnets - amzn.to/3Ym8Nkv

[@spoonyanimates9841]

@@JohnsPrintLab thx so much bro great video btw

[@AaronBittenbender]

Where is the link for the file.

[@JohnsPrintLab]

The file is by Yosh Studios. Can buy the one file on Etsy I believe or sub to the patreon.

[@AaronBittenbender]

I did buy the one from do3d was just asking. Thanks for responding

[@originalhondo]

Greta video. Has anyone been able to print the mask in one print. I have a Bambu Lab X1C and i cant print main mask in one print. I keep getting boundary of the plate exceed error. Been trying to oriaent the mask but cant get it to fit.

[@JohnsPrintLab]

If you orient it like in the video and use slim tree supports it should fit fine.

[@DazDroAnimations]

Is there a free version of the Deadpool mask made by another company?

[@JohnsPrintLab]

I'm sure there is somewhere. I would check on the printables and makerworld websites.

[@nour4013]

1:46 bro forgot to cut out the burp😂😂

[@JohnsPrintLab]

lol that's me saying Uhh, but it does sound like a burp haha

[@claytonpurcell1582]

My brother told me that you will live longer if you have microplastics in you. The more plastic you are the less biodegradable you are.

[@StylishJedi]

The magnets you linked are WAY underpowered to hold this together... what a waste of my time gluing all these magnets to find out that they are underpowered and also TOO SMALL to hold this mask together... Thx for wasting my time and money... Besides that, good video!

[@JohnsPrintLab]

I used them just fine in several projects. There are likely stronger ones out there, but these have been okay for me. Maybe got a bad batch?

[@fariskhayat]

What ratio is good for the wash

[@JohnsPrintLab]

Its hard to say. I dont measure but would err on the side of less paint more water. Can always add paint if its too thin.