How to 3D PRINT TEXT - 3 Ways to Generate 3D Printable Text and Logos

[@emilianorangel8798]

thank you for showing all the different options to do this. it really helped.

[@FilamentStories]

It's always good to know how to add text to a model…but you gave us *three* ways! Thanks for the tips, I don't use Cura as much so it was too to see some of these options.

[@CallumColes]

It was hard to stop at three haha, different ways all have there pros and cons! Thanks for watching:)

[@1DAY1CAD]

Good tinkercad tutorial! I like this video 🤩

[@CallumColes]

Thank you! Appreciate the comment:)

[@fredericocorrea9814]

Thank you for this video. Great job.

[@Shensationell]

Very helpful and easy Tutorial. Thank you very much!!

[@DinaLorr]

Extremely helpful & straight to the point 👏🏿👏🏿👏🏿👏🏿

[@JasonGillmanJr]

Huh, I didn't realize you could just drop an image into Cura and have it do a height map. Neat!

[@CallumColes]

Great way to make lithophanes too:D

[@lawrencejohnson3259]

Could you share the stl export parameters and slicing details for the gcode creation? I created a model with text in solidworks and I am having difficultly getting smooth edges on my lettering... The "s" and "O" print faceted, I can't get smooth lettering... Thanks!

[@Hipbydesign]

What if we want them to be islands? Will it still print ok? Also can you resize in Cura so it is more accurate to the dimensions you’re aiming for?

[@CallumColes]

You can print as islands, but obviously they will not remain attached to the main body of the print once everything is removed from the build plate, so would need something to keep everything together.

[@davidsalman8362]

How do i make the Text Below the Surface of the Board? as if it was Carved into it, with the Text having a Depth instead of Popping out? i'd really appreciate your help man, or if you could direct me into another Video that shows that Process that would be Amazing

[@CallumColes]

You can use the hole function in TinkerCAD rather than merge shown here and that will allow you to create the debossed text you’re after

[@KeithKingSD]

I am new to printing. When I print text with PLA, The letters don't stick to the base. What am I doing wrong?

[@CallumColes]

Sounds like you’ve not got your first layer height set correctly. I’ve done a video on how to level your bed and get the first layer perfect. Might be worth a watch:)

[@orvos1459]

Is it possible to just take a picture of a book’s page to then print it, without having to edit anything?

[@Mark_B544]

how do you add in cura as this video shows shit?

[@CallumColes]

Not sure of your exact question?

[@Mark_B544]

@@CallumColes add text in cura as your title says

[@southernutaharmwrestling2903]

Still didn't show how to add the logo to the print

[@thesussyfoodcridictofameri2687]

Thanks

[@CallumColes]

Welcome :D

[@Butterchunks]

thanks, i had to make a stamp for undisclosed reasons.

[@davidanthonybatten9150]

is this because text doesnt work in Free CAD???

[@billbrown994]

It is too bad that this video did not just show a complete process. For example take a file from thingiverse, import into Cura, then show how a name could be added to the thingiverse object then print the object and we see the name on it. That would have ben really helpful. I would love to see a cat for example from a file taken from thingiverse etc, printed with an added name on it.

[@CallumColes]

Hi Bill, I do have a video that shows how to do this in meshmixer, here is the link if you fancy a watch: kzbin.info/www/bejne/m2OsY4p7o92KpK8

[@billbrown994]

@@CallumColes Thank you.