Just happened to me some how made a 2hr print take 3 1/2 hours

My spool snags when filament brand new. Creality brand PLA. After 2.5 hrs. About100-200 ft filament later, spool still wound factory tight. It then snags. It doesn't spool out. the Tight roll from factory Filament gets wedged, locks up-NOT USER ERROR

You just saved me from another panic attack, THANK YOU SO MUCH!!!

bs its my fault, they come tangled from factory, theres no way "user error" is causing a tangle over an hour into a print with a fresh roll thats been properly stored. If thats so this video doesnt explain how to prevent the mysterious user error. this is why some pros jsut rewind their roles because they suck at doing it in factory.

Thank you so much for this - saved me having to re-edit my video!

After a year of issues with my roll I finally fixed it ^^

I genuinely was abt to crash out 😂 I had to run an do something in the middle of editing and I guess my files got fucked but here u are my savior 😂😂 appreciate u 🙏🏽

I know it's been a couple years but is this part still available?

Great video! Have converted one of my 5 pluses to corexy and direct drive. Spool above from a dryer is the ticket to making this an even better printer

Can this happen to f36?

YOU ARE THE BEST

Awesome review mate. Quick and easy to understand Your voice plus you’re very informative and speak from experience, i didn’t know you could calibrate the nozzle up and down

THANK YOU

Still didn't show how to add the logo to the print

Great introduction to code blocks and thanks for quickly mentioning why you would want to bother with code blocks instead of just manipulating the objects directly - its what kept me watching. I will have to check out your other videos. I haven't done any programming in a long time now and I think its really great how they came up with a visual, drag and drop representation of code and I'm definitely going to spend less time on the Xbox and more time in TinkerCad this winter. With TinkerCad and Fusion 360 and a 3D Printer or CNC Router you can make some incredible creations. My thanks to AutoDesk for facilitating those who want to learn and create but can't buy a subscription for everything : )

Bro. So good. Saved me big time.

Thank you !

This was helpful, thank you!

Thank you so much I just crying my. Eyes out feeling all my efforts of editing this video is in vain You saved me, thank you😢

Hello. Do you have a video on how to change the settings so I can utilize the whole bed for bigger prints?

Brilliant video thanks. Just bought a 4 series cab and noticed the sloshing. On this mornings job list! Thank you

Oh my goodness THANK YOU so much for this video - I thought I was going to have to start all over. Sending over a huge virtual hug to you!!!!

I was literally about to delete my whole video because I was getting soooooo frustrated. Thank you SO much for your help!! 😊

Just had this happen on a brand new roll, first couple of prints came out ok, Then next 17 hour print failed mid way through. It was a Jayo pla and I though when I opened it that the filament felt particularly tight, is it possable to come out of the factory too tight ?

Thanks for the good explanation. I've got the same problem with my 3 series.

this is crazy......

goood guid thx man

Thank you! Same exact problem on my 2018 430i convertable. I was able to improvise by using a bolt head (as you recommended) and just turned it with a pair of vice gribs. Probably drained about 2 liters of water between both sides. The driver side was worse. Unfortunately what led me down this road was the blown amp, finding it submerged in water 😩 Update, there is a service bulleting from BMW on this: 513316. They say to leave the drain plug out after removing it. Don't re-install it. I also saw on other threads to cut both plastic overlays to allow the water to flow and not cause dirt/grime building up to prevent drainage.

Dammmm, gonna have to check mine

On the end of my filament, there was a bit of tangling so I decided to loosen most of the remaining filament to get rid of tangling and result...it got even more tangled and whem I came back, my printer was printing filament in the void, wasting my printed object. Thanks for the video, it will save so many prints in the future

Mg I was desperate thank you it help me

so last week i thought my rear channels went \Logic 7 surround setup if i go to rear channel i hear nothing ,then today whilst putting the roof down it wouldnt do the final boot close,had water under battery and on red junction box above it too soaking, carpet was soaked ,and one of my 12v cig socket is dead,all fuses ok (66,69),and the one in the boot ,after reading this i found my drivers side rear window seal was about 4mm away from the side of the glass ,so i gather its coming in there,other side is fine,gonna look tomorrow for the drain channels,not even sure if amp is fried anyone with a f33 440i try putting sound to rear only(full) ,can you hear anything,i cant get a straight answer on the forums some say its the way its setup i.e the front covers the speakers in the rear side panels too,i know ive got water even the boot seal had been moved and wasnt covering the outer lip expecting a tsunami........

Ridiculous!!!

Hello thank you for the video What slicer settings are you using ?

Best video I've found to help identify the location of the drain plug, now resolved thanks for the info 👍

Just happened to mine. Radio on and off and then poof gone. :/ Wish I had seen this first but at least will be able to fix now. Thanks!

Is it possible to just take a picture of a book’s page to then print it, without having to edit anything?

christ

I've upgraded mine and now for.some reason my cr touch won't sense my nozzle driving into the bed.. dunno what I did, all I did was move the cr.touch mount over to an appropriate place

How watertight is this for printing watercooling parts like distro plates, tubes etc.? Thnks

answered my quests. t hanks

great video, love the tips and the format . also the vernacular is easy to keep up with

THIS IS AMAZING. I was panicking thinking I'd have to start from scratch! You just saved me hours of work, I can't thank you enough!!

After viewing so many other videos, help pages, and other online pages, this tutorial for fix was the savior. Thanks a lot, you!

SOVOL SV08 have a Tangle detection option to buy

Very good video, thanks! However, when I start pulling the side skirts, I get some noise that sounds like something's about to crack. Therefore, I didn't dare to pull them out. Any comments or hints about that? Thanks again!

We have to write a complaint letter to BMW and all of us sign it and get our money back!!

Tried everything in this video and still under extruding, already open 2 new filaments to check if it wasnt just humid

This was SO helpful. I just edited a 30 minute video that took over 12 hours and I was afraid I’d have to start again. Thank you!

thank you