HOW TO : 92-95 Civic Core/Radiator Support Replacement !

[@honchoJAS]

This guy is so positive, and always in a good mood! Thanks for helping me through situations with your videos man!

[@DJV94022]

Thats cause he never had a crazy bytch draining him props to him

[@sbeezy562]

thats good bro i feel the same way man his video always help me get through my emotional days

[@besttex4735]

Only thing I don't like is that he doesn't respond to anyone.

[@felixpereyda994]

Literally building my eg alongside with you. I just installed power locks and the alarm last night. This weekend Im installing the coilovers.

[@Jandro90]

Restoring my 95 si with yall

[@camharro9567]

Same here bro, putting in my k20 engine mounts

[@estewar03]

@@advanceautoparts1769 You're not going to win it anyways, so chill a bit guy. Everyone wants something for free, even when you get FREE content that's worth watching?

[@ClaytonH1975]

Honda-Tech FTW. The item you had in your hand at 3:23, when you said “What in the tarnation is this” is part of a hood pin switch. Leftover from an old alarm.

[@vonaroz4354]

If ever I got lazy I would turn into your channel for inspiration working on my Honda crx thank you always. Love your content 🚙🚙🚙🚙🚙

[@mattw4662]

On the used rad support you could just use a drill bit and drill all the way through because your not going to use the metal behind the rad support. The spot weld bit can be used on the car because you have to save all the metal behind it

[@AlteredCarbons]

9:28 thats the reason why if community college classes we learned to never wear gloves when working with ANYTHING that spins. material's like plastic gloves or work gloves will catch and spin along with what ever direct its going. skin how ever will just tear or rip. both not good but skin is a lot more forgiving when its not caught with anything. i watched a friend lose a finger cause he was using a wood jointer with gloves. just cheap dollar store like grip finger gloves. it took less then 2 seconds for him to lose 3/4th's of his pinky before he was able to rip it away. his adrenaline was so high he didn't feel any pain. i just looked him and said "you know thats gonna need a stitch or two right?" and he just busted out laughing and said "well fuck... i hope i can still scratch my ass tomorrow"

[@janvos1986]

Its the same dana. Here in europe. Ej1or2 hatch or sedan its all the same. ✌🏻🇳🇱

[@randomrebuilds]

This video is gold! Wish I saw this about a year ago as I had to replace mine on Project CB9 as previous owner lied saying it was never in a wreck. Paid a bodyshop over $1k to replace it plus pull the frame rail over by about an inch.

[@GIZZMOTORSPORTS]

all the 92-95 2/3/4 door front core supports are the same. same headlights too, different markers, hood, fenders and bumper.

[@carlosnombre2028]

Making a radiator support quick release in and out to remove I like that

[@nathanaw7334]

This video gave my confidence to replace the bent core support on my honda after I crashed it ❤

[@williefree7089]

Bruh... you just great! Period!! Wealth of skill and knowledge, plus informative and engaging videos!! I didn't have to fast forward one single part!!

[@toasty925]

I crashed my EG a few years back and had a bodyshop use a cheap chinese aftermarket radiator support and I regret not using OEM. One of these days I will find a clean oem one and swap it out. Thanks for the video!

[@nickcentralvalleyslabs8375]

Man I give you big props doing everything with one hand and recording 👍👍😆

[@StaticEG]

Are you able to just bolt the support on bc I don’t have a welding machine or anyone that can do it for me and I need this piece bad

[@thatsjayyt3457]

did you ever figure that out having that issue rn

[@Undergroundgrows]

Did this same thing to an ef once its a lotta work, great tutorial thanks Dana!

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@hectormontalvo8978]

wow you are an actual professional auto body repair and paint not a hack like those on craigslist I hired one of those and have no clue about mig or spot weld remove I had to do it myself

[@goldenclutch5994]

had my rad support re done on my eg hatch back in march 2022 by a Collison shop, i bought a clean jdm eg sedan front clip and it looks great corner light fitment was their only problem but they made it work great w oem corners, great work on the vid!

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@betosgarage]

around how much was the cost?

[@JDMovation]

Same. Did this swap myself also from sedan to hatch.

[@cowtown9940]

Literally the best video and the guy is so chill and to be honest you just showed me a way I can have it made to be a bolt on core setup 🙌😎

[@danielhiemstra3834]

I think for the front wiring (the extra wires) that you have a eudm interior harness. EU civics have turn signals on the fenders and have a switch to adjust the headlight hight. i have a usdm harness in my eu car and found these differences!

[@thatguyroute76]

Yupyups cant wait to see how clean simple stock look you give that hatch

[@iron-gamerstv]

I really appreciate your videos Homie, Youre a very good teacher and easy to follow. You got so much knowledge in what you do, man. I had to turn on noti's so I don't miss anymore.

[@juansoriano658]

great job. reminds me of my friend hector back in the days working on my civics

[@rjmacay]

Do what you do best! Dana love the videos/content. Bless you and your family. 🙏🏼 💯

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@soualor5611]

Bro, your camera is on point in this video. Crystal clear HD. Lol!

[@salomonramirez9935]

If i ship you some depo amber corners would u use them on the hatch? I don’t need them and there new in box

[@MonkeeyAyanami]

Bro i was just looking at getting started welding with flux core but was second guessing myself!

[@EJayNine]

Looking better already, You work magic Bro.

[@lucioalonso4547]

It's coming along nicely, Dana!

[@drivenlowkey2437]

Was on the live stream over the weekend

[@CRXJDM88]

It the same but the front end on the 4 door not the same as the coupe and hatch I one-time-use the sedan Fender and it didn't even line up on the hatch correctly just a tip for you

[@alearath]

Did this for my eg converted Del Sol all the same process

[@OfficialTonyRS]

Great vid brotha 🤙🏼 I say shave the side door trim like the CX model. Thinking about doing that to my EG Sedan. Keep killing it.

[@HiFiInsider]

My Civic EJ1 bumper doesn’t align with the hood, one side is more out. Not sure if someone over pulled the radiator support or the bumper support is misaligned. :(

[@aaronbugaiski2487]

Good video. I picked up a 95 del sol and i gotta do the radiator support. Any idea if they are interchangeable with the regular civic support? They look pretty much the same to me.

[@dinxsy8069]

My daughter calls my EK Blueberry, well she did when it was illusion blue

[@edvan161]

Yo bro let me buy your hood risers with your autograph on em.... I would love them for my cg accord 01 I'm doing a swap the sedan front end to the 01/02 coupe front end but from my past experiences I always had to run hood spacers

[@chrisp675]

Great video where do you find weld thru primer?

[@keithroe3323]

Coupe-hatch- 4door eg all the same core front, hoods fenders and bumpers differ

[@josuemedina4910]

Great video man got alot of great info of this💯

[@skuimouchiha7040]

Love your stuff man keep it up

[@bo2o]

put affiliate links up from amazon for tools to make a little extra

[@Kiwitakimago]

You can use a step bit as well

[@adderlyrosario5258]

No sé sabe que tiempo tenía buscando un vídeo asi

[@curtisbeef]

The Honda Parts diagrams show the 4 door and 3 door are rhe same front bulkhead 60400-SR0-A00ZZ (funny enough you can still order it from honda)

[@mikesandi4871]

Nice way to start the proyect men! Can wait to see the next video ✌️✌️grettings from Costa Rica

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@nicknyce8477]

I know that the sedan corner lights are different but that can just be the way the fenders are cut the support should be the same

[@circuitsevenautotech7488]

Looking good bro! Eg coming along well

[@Ray-rg9ro]

Love the videos man by chance do you have any videos involving da9 or can you point me to a channel

[@stephendowney4930]

super looking car already

[@FunkMasterSleck]

Top notch knowledge, top notch work

[@CUBANCHULO149]

Good job! I also have a eg coupe. Where can I find those bumper brackets that go between the bumper and the fender?

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@josephruiz4153]

I’m here for the process of blueberry 😂

[@acef_performance8416]

Lube the tip

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@yengxiong2212]

Beast Mode

[@kseriesBert]

WHATS UP MY GUY

[@Shadowmosesarea51]

Great work as usual buddy

[@RichardsRodClassic]

Stop wasting your money on the spot weld cutters! Spend 10$ on a spot weld drill bit. Ive been using the same bit for 7 years and thousands of spot welds.

[@joxxeyy]

Any brand you recommend, thanks in advance!

[@RichardsRodClassic]

@joxxeyy not rally most of the actual bit are better than the cutter. I got mine at napa.

[@gerodriguez1993]

It's looking great!

[@michaellazarte5419]

You are awesome thank you for the amazing info!!!

[@yannickvignault4686]

your vidéo are therapeutic😀

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@KyushaStyleTuning]

Excellent tutorial! 😎👍🛠🔰

[@carlosnombre2028]

Bumper will be small for the new radiator support

[@angleroutdoors8527]

You are a beast bro!!!

[@victorwilks88]

Great progress !! 👏

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@delsoldrizzy7492]

Is this the same for del sol ?

[@Jason-nk4yr]

I have a coupe,hatch and a sedan. Core support is the same on all.

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@yungbless9383]

Instead of welding it can I use self tapping screws?

[@vincentviveros8506]

I have the same question, I just wanted to use some bolts and nuts to hold it together 😂

[@DeepakDeepak-dn6qb]

Dana can you please paint the car an the engine bay the same color as the wrap pleassseeee...

[@bbyjet]

how much would a job like this cost ?

[@pavel1809]

awesome brother

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@fastboiiiz9424]

Coupe and hatch are the same sedan is a bit longer in fenders and hood

[@pandesal_mark]

I need to do this. My core support is kicked in and the hood and bumper doesn't line up.

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@favianromo1990]

Why not just put the hole thing on nested of cutting up and welding,take the other one out and replace it with the junkyard one

[@junbug779]

Bro hella mad how easy it is to take apart vs the EF would take me like an hour to get bumper off lol and like 30 mins for each fender hahahaha

[@ITRLOVER]

Let's goo!!!

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@rustyshackleford2525]

Just some abs / horn / ac plugs , No big deal

[@Jay-dp5wp]

How similar would this be on a Del Sol?

[@YoungStatic]

Same same

[@JESC-RV]

👍🏻

[@themadoct]

👋🙏✌️💪 enjoying the eg content thank you

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@rickstyla274]

Beautiful work bro..just like how the pros do it..

[@Mr.Wongburger]

Not exactly sure what the reason is, but the sedan front end is not interchangeable with the hatch/coupe. The hatch and coupe share the same hood, fenders, headlight and corner lights. But the sedan doesn't. Is that more of the design of the bay and not the support itself? I don't know. But I'm sure you have done your homework and it will work out.

[@edgarsoltero1989]

Everything is different except for headlights, they are interchangeable between coupe, hatchback and sedan

[@sbeezy562]

i had ex sedan yes frontend are almost all the same but the corner lights are diffrent

[@andyzagray7962]

My boy

[@syman4985]

Radiator support is the SAME from all 2dr and 4dr only difference is hood, fender and corner lights

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....

[@FR11]

#ALLTHESTATIC

[@AZMarine78]

😎🤙

[@franciscocollins6715]

Design but it is different two hatches

[@rgreerjr]

when drilling, especially with small sized drill bits, stop putting so much downward pressure on it and instead let the drillbit do the work for you. You can even see in the drilling portion of this video how bent the drill bits get with all that downward pressure you are using.

[@TheTaker31]

Where is ur safety Sir? 😳 Wire wheels and no eye protection is a bad idea. 🤪 You don't want to end up with pcs of metal in ur eye(s) Safety first 👍🤘

[@HAVOK-xh1yo]

Bro can i just pay you to do mine

[@gemini3558]

😜👍🇦🇺

[@Jason-nk4yr]

Tag

[@Gordo101978]

Don't worry, they're all tha same

[@nicknyce8477]

Coupe and bubble are completely the same

[@Rudenutts]

They are all the same but the hoods are not

[@Masegucci]

I don’t think it’s same like the hatch but will find out lmao 😂😂😂 #senditpapi

[@Tele_gram_me_Young_Static]

I'll appreciate you for being active on my channel 🔝🔝🔝DM ME ON TELEGRAM with the above username, I have something for you....