How to access your broken phone from pc ,Recover files from a broken Phone

Free download the data recovery software: bit.ly/39eb1Gz
Recover files from a broken Phone: bit.ly/3WgXbuB
The free version can recover 100 MB files.
Here i have shown how to transfer data from your broken phone to computer and how you can use your device remotely on computer.
Recover Files from SD Card or any Android Phone:- • How to Recover Deleted...
How to access your broken phone from pc ,Recover files from a broken Phone(2021):- • How to access your bro...
How to turn on USB Debugging on Broken Display Phone(2022):- • How To Fix A Boot Loop...
-------------------------------------------------------------------------------
Your 1 Subscription to My Channel Can Make My Day 😊😊👌
• PLEASE HELP ME GET TO 10,000 SUBSCRIBERS:
» bit.ly/3bpjlDw...
--------------------------------------------------------------------------------
Downloads:-
adb setup :- bit.ly/3n4PS8u
Vysor apk: bit.ly/2Wby8fH
Vysor app for Computer :- bit.ly/378PznB
----------------------------------------------------------------------------------
Recover deleted files for free :- • How to recover deleted...
How to Recover Deleted Files from SD Card/Pendrive:- • How to Recover Deleted...
1000₹ Tablet is having Higher Refresh Rate:- • This 1000₹ Tablet is h...
How to Lock a Folder with Password ?:- • How to Lock a Folder w...
How to turn on USB Debugging on Broken Display Phone:- • How To Fix A Boot Loop...
How to turn on USB Debugging On Broken Display Phone :-
• How to Turn ON USB deb...
-------------------------------------------------------------------------------
Blog:- khushangvyas.w...
-------------------------------------------------------------------------------
Note : You should have USB Debugging ON on your Phone.
Steps :
1: Connect your Phone to your Computer.
2: Double click on adb setup file to install it.
(Download the adb setup :aspedrom.com/25zz or bit.ly/3n4PS8u)
3: Press Y for every question asked as shown in the video to
install the drivers properly.
4: Copy the Vysor apk file to adb folder in C drive.
(Download the vysor apk : aspedrom.com/27DR or bit.ly/2Wby8fH)
5: In the adb folder in C drive press Shift + Right click and
select the option "Open command window here".
6: In the command window type the following commands
(i): adb devices (press enter).
(ii): adb install ......(Drag the vysor apk after the adb install
command).
(iii): exit
7: Open the above link for Vysor App for Computer (aspedrom.com/29ZU OR bit.ly/378PznB) and click on install, after installation click on launch app.
8: Click on the View option to use your device remotely.
--------------------------------------------------------------------------------------------
Turn On USB Debugging on the Broken Phone:- • How to Turn ON USB deb...
Leave a Like and Subscribe to the Channel for more Awesome Videos.

[@KhushangVyas]

Recover files from a broken Phone: bit.ly/3WgXbuB

[@tko954]

Does this work for the Pixel 6? My screen broke and I'm trying to transfer to another Pixel 6

[@ahilansenthil9051]

sir my android phone is completely broken into pieces...like the screen...the centre piece wherre the motherboard and all will be there...seems intact to me...and the battery has also come out. is there any possibility??

[@OLDSCHOOLGAMER275]

​@@ahilansenthil9051 send to me i will do that

[@ahilansenthil9051]

@@OLDSCHOOLGAMER275 LIKE SHOULD I SEND IT TO YOU? BUT YOU CAN TELL ME HOW TO DO. I CAN TRY ASWELL

[@OLDSCHOOLGAMER275]

@@ahilansenthil9051 we will give you data by using hdmi technology

[@anle5281]

Can't enable USB debugging unless it was done before the phone was locked so this is pretty much useless

[@TheViknesh23]

Khushang you are a legend mate. This and your other video on how to enable debugging on a phone with a cracked screen helped me backup all the data on my 3 year old phone. Thank you for the innovative methods and excellent explanations. Rock on man and Good luck growing your followers!

[@shreyasjoshi9]

can you please help me do it?

[@roamwithrahul2965]

i ma trying to backup but its completed mu installation hanged in 93 %

[@neggas-]

can stfu you dumbass? it doesnt work

[@alanrubinzoe699]

In Command.. Its not installing

[@alanrubinzoe699]

And i have installed vysor.... But its asking to enable debugging on phone

[@piyushjoshi4407]

Hello Khushang, Thank you for helping people with your knowledge. I am using Samsung M30 phone and screen is broken but when I am trying to list devices then my mobile device is not getting shown in the list. Could you please helps.

[@kidspro2764]

how are we supposed to enable usb debugging in our mobile when it is broken??

[@sandeep4lifer602]

@Trishank Upadhyay abd what bro?

[@sarthaksaini6723]

@Trishank Upadhyay what's adb bro?

[@sarthaksaini6723]

@Trishank Upadhyay what does adb stand for bro and is it some application or something which i need to install in my pc to connect to a broken phone?

[@deepakrathore6908]

@Trishank Upadhyay bro my note 5 pro mi logo pr stuck ho gya hai Toh data recover kaise kru plzz help bhai

[@thinhbui4182]

And accept the adb connect from pc? This guy is an idiot bruh

[@sdabur]

I cant appreciate your enough man! Great job done here. I have literally spent 5-6 hours watching several videos but none of them worked but this worked man. Thank you so much. Keep up the good work !

[@hafsaasgharch3894]

Which software has he downloaded? I can't even listen the audio.

[@crowcellbleach]

Thank you so so much. This is exactly what I've been trying to figure out how to do for the past two hours. Every other video I found and started watching recommended one of two ways to do this and neither were really working for me.

[@AlexJay403]

Did you have to enter your password or could you do this with the phone locked

[@eliebordron5599]

It works for me! Thanks a lot! Also it might be good to add "USB debugging must be on" in the title

[@AliKing-bs4ux]

my phone USB debugging is OFF :((( and have broken screen and i cant see anything , and cant open password screen :(

[@amirarsalann]

@@AliKing-bs4ux me too bro did you any think for you phone??

[@BirendraKumar-no5sc]

@@AliKing-bs4ux same problem here

[@MBS..]

@@BirendraKumar-no5sc same

[@arulselvi4505]

@@AliKing-bs4ux same... can you help me?

[@yonic96]

I can see usb debugging is enable, because you can access files, what about those phones with that feature disable? Regular people don't enable it, mostly for repairs or file transfers. So how you can access internal storage?

[@markd5688]

if you can still see the screen, you can use a usb otg connector with a keyboard/mouse. once you do that, enable usb debugging by first enabling developer options and then going into dev options and enable usb debugging. NOTE: first time you connect you will have to "authorize" the computer by selecting yes on the screen (which means a lot of un pluygging and plugging in). to reduce the in and out, you can connect a bluetooth mouse easily after using the otg cable.

[@tntvenom1674]

@@markd5688 I cannot even see screen, it's even working I am having same problem

[@nothingtosay9434]

@@markd5688 what about realme devices this phones can't connect a mouse bcoz OTG connection is already off how to on the OTG connection

[@kevinolivieri355]

How do you enable usb debugging on a broken phone from a client? (more realistic real life scenario)

[@unlimitednature]

yes, that is the tricky part of these kind of videos

[@Shabahat84]

If it can be possible 😉 then Y we r watching his videos 😃😃😃😃

[@thomask2133]

if this isnt too late of a reply, u can connect a mouse to your computer and it will work fine(provided you can see whats going on in your screen), wish i was trolling

[@denxrstudio]

Im still looking solution for this too.. My 2016 phone screen have problem, no display. Phone still work perfectly but screen. I cant access the phone through computer as need to click 'transfer files' from the phone. On my PC, the phone is blank (hidden)..

[@JorgeRamirez-pq3jo]

@@denxrstudio have you found any solution? I'm having the same problem

[@lawrencepatricio5776]

This is not useful for the average Joe. Most people don't enable developer options. And if for example you did, you cannot just use any laptop because you have to confirm on your smartphone screen if you will allow the laptop to access your device. So, you can only use your technic if 1. You have enabled developer options before you broke your screen. 2. You have previously connected your phone to your laptop and allowed the connection. Hence, this technic most probably be useful only to a very few people.

[@sumitratta]

Hm I'm agree with u....because...? debugging accessible permission can't possible without any right screen ..so it's just bullshit...

[@thenumber5bus]

plenty of software out there that can do this, plus all need to have debugging on so if you havent then the fone is a brick pretty much.

[@jackepner9984]

If the phone's broken, you can't turn on dev mode...

[@salazar665]

i did all that found my device on vysor, when i click view it shows., connected device needs pairing confirmation.. how am i going to do that if the screen is full dead.. wth

[@existentialcrisis5354]

my phone's touch is not working almost at all and i don't know if i should try, because yeah. i'm scared that it will need any confirmation

[@srinivass4306]

A. . .

[@TrithaGaming]

@@existentialcrisis5354 yes it need conformation

[@meruemking9622]

@@TrithaGaming how do you address the pairing if the screen is total black out?

[@teodortodorov6974]

Just take your phone to technical service to get your screen replaced

[@hamzajamil2041]

hey brother my vysor is still showing" android need pairing confirmation click on allow to continue " but my phones screen is broken how can i allow? help pls

[@mustafanasery7643]

I have a problem in step 6.ii, after i give the command of adb install and drag the file, I receive the error which says "device not found" and - waiting for device-. Obviously, my device cannot even be connected to the computer. Any solution?

[@mohammedabduo6176]

i have the same problem

[@skylifeseries6646]

i have the same problem

[@-AmbarKhandelwal]

I have same problem

[@theonebullet8448]

Guys, this will not work for broken mobile screen.. coz you need to enable usb debugging.

[@himanganethsara5774]

Is there any solution to access to my phone files? Cause i can screenshot and enable usb debugging somehow

[@assamlearns8399]

​​@@himanganethsara5774ine went black just like my profile picture. I don't want to spend 2k to replace the screen but I have some photos over there. Do tell me if you find a solution. Edit 2 : My developer mode is on but I can't turn on usb file transfer as my screen is totally Black. It is only charging.

[@y.o.p.m]

​@@assamlearns8399 I'm having the same problem. Did you find a fix?

[@assamlearns8399]

@@y.o.p.m no I am gonna try it now. I am not sure if my phone is on or not I just hear the vibration when it's off and on. My phone was in silent when it all went black.

[@y.o.p.m]

@@assamlearns8399 best of luck to you my friend.

[@donaldpayan7283]

Hi. Does this work with Note 10? Vysor prompts it does not find a supported device. Tho unsure if this is because I have not enabled USB debugging but I can't do that as the phone display is not working at all

[@BobbyJCFHvLichtenstein]

QUESTION: In the command window, it says there is no device even though I have my phone plugged into my computer - any solution?

[@manishbharya7541]

same problem here brow

[@albialla3479]

is your phone locked? bc it must be unlocked for usb debuging to access

[@BobbyJCFHvLichtenstein]

@@albialla3479 why should it be unlocked when the video is about accessing a broken phone. Does everyone have a lock on their phone?

[@cameria7732]

@@BobbyJCFHvLichtenstein Same problem here.. HOW CAN I UNLOCK MY PHONE DAMN???

[@BobbyJCFHvLichtenstein]

@@cameria7732 lol exactly

[@milankbudha]

adb devices command work only if usb debugging is on already...i have a broken screen and usb debugging is not enabled....

[@ayezcca]

how's rn? do u hv the solution abt that?

[@SL-iz5tx]

the Apk file is not the same anymore. Maybe that's why it's not working when I get to the Command window? It says error..

[@MPJmike]

PS C:\adb> adb devices List of devices attached * daemon not running. starting it now on port 5037 * * daemon started successfully * PS C:\adb> adb devices List of devices attached PS C:\adb>

[@carimgemelli2957]

same, it doesn't find the device

[@duraisingh797]

Hi Friend, Concept not working. Vysor have separate application for ADP drive. So upload new video with latest updates.

[@Jinbyulla]

It's not working for me with this version maybe because the video is not updated ? Idk

[@Quidance]

guys it feels like a scam. It does't lead you directly to the download and you have to skip unending adds I didn't try to download the second downloadeble after this. put a dislike on it

[@EkzamRA]

You can download it directly through the link. But you might want to use an adblocker to help you get there

[@theonebullet8448]

when i install vysor apk, i see a msg like this " errirL device not found - waiting for device". what to do bro?

[@wolverin2030]

... waiting

[@punamdoley6110]

me too...its just not installing

[@TheShaukeen]

Hi Khushang my phone got broken, it is now completely off. The on-off button is broken. Can I still get my data or atleast phone contacts ? Thank you for help

[@ali.017]

what if USB debugging is not on in my phone? Is there still a way I can mirror share?

[@squierjoshyt]

I'd like to know this too.

[@Mina-us8jo]

Did you find a solution?

[@squierjoshyt]

@@Mina-us8jo I didn't. Why isn't USB debugging on by default, just in case this happens?

[@JasonShy]

How do I enable USB debugging on the broken device through the visor software??

[@chuksscomedy3757]

Hi Sir! can this method be applied on a phone that is stuck on booting due to broken screen and cannot touch? ( password on booting )

[@user-yc6oz6fq5s]

does it only in android phone? because i have old samsung z4 which is not android i have files in it and usb debugging is also not on can someone please help me out!

[@samardev3725]

Why is the apk file different in the video and the link you provided?

[@duogamer1097]

same problem here

[@sors4r4]

I have same problem

[@charubalarath2036]

My usb debugging is off, how to transfer data?

[@Kkulkarni100]

Hi..i tried to do but after running adb install entry in cmd prompt, it giving error... could not access thr package manager, Is the system running?... " Pls help

[@gouthamkr1931]

Bro I'am having problems while installing the drivers " adb install ......(Drag the vysor apk after the adb install command). " After doing this it is showing that " INSTALL FAILED USER RESTRICTED_ Install cancelled by user " and I can't do any further in Vysor app it is showing apk install failed Bro Pls Reply if you see this......... Thankyou.

[@OneSaile]

bruh, that blank apk file you copied into the adb folder is not included in the description?

[@alokrajput2011]

bro my moto g5 has been turned off, and it is not openinng whenn i try to open it it goes to bootloader mode, like when i type password before power it on, after then it just starts blinking with moto symbol .. please bro my data inside that is very very important ,, please help me bro

[@carliennabenbow6725]

theres so steps you are missing. it would help a lot if you couldve deleted all of that and done it completely from the beginning. i couldnt find that second file at all that you downloaded

[@mediaproductions6795]

Mee tio..did u get any sol ??😭

[@dalipkumarsharma2586]

Same prblm

[@joshuaurieltinio7923]

At 1:28 where can you get that APK file?

[@OddCloude]

uuhh...how to turn on usb debugging when the lcd is broken and i cant see anything...well all i can see are notifs nothing else...is there any other way to turn the debugging on?

[@user-rj9wl]

yeah same dude]

[@dailyfunvidsyt]

if you memorized your phone plug in a mouse and try your best to turn it on , it's in delevoper options

[@KhushangVyas]

Bro i have made a new video for that check that out link is in the description

[@dhameliyaprince2247]

Vysor apk file download link is not working please sent me link

[@mohamedshammaz2586]

My OnePlus 3T is broken and i debbing is off so how do i connect computer?

[@luckydeora3309]

same problem

[@KhushangVyas]

Guys there is a link in the description for that video try doing that.

[@nikhils2343]

my phone is dead and it is not turning on. can i use this method?

[@Appletress]

Will it show life, or any sign of turning on? If not, you will not able to use this method.

[@nikhils2343]

@@Appletress no it didn't

[@Appletress]

Try connecting it to your desktop/laptop and see if it shows any hardware connecting. If not it means your phone is just dead.

[@marjannak]

I am trying to open the cmd while 1:50 sec but i am not able to do so, instead i can open PS but the command dosnt work

[@AliKhan-tj2nj]

thanks bro just looking for this type of solution my phone busted me but you heal it

[@latevlogs]

Thank you soo much bro this actually worked, its always the videos with an indian accent that help me the most.

[@corruptedmight]

Agreed lol

[@theomann1534]

literally what was the need for this

[@ionutfilimon7801]

hello, where can we find the link from the white folder on the screen?

[@128bitpower6]

I don't see any apk file file on the desktop even after installing the adb software what should I do?

[@FoxinTaiwan]

It's a virus

[@shaadahmed9222]

Same here

[@TechFoodie]

Thanks so much explained very neat really helped me to recover.

[@thierrymouamadje992]

this is my error:C:\adb>adb install C:\adb\com.koushikdutta.vysor_1.0.0.8-1477720800_minAPI16(nodpi)_apkmirror.com.apk error: device '(null)' not found - waiting for device -

[@Jinbyulla]

Same thing with me

[@markd5688]

make sure your usb cord is good

[@gerlitoomepuu]

Is this working only with unlocked devides? I turned my phone on and I have black screen so I cannot remove the screen lock and cmd cannot find any abd devices.

[@Lucilfer0504]

it did not work on me it says it was needed to open the usb debugging but i cant because i cant see what im pressing at because of broken screen

[@onesimusrai8556]

same here It requires to allow usb dibugging

[@prathmeshwakchaure9568]

Bro how to download apk file Fast answer bro

[@jg5697]

still need to enable debugging before you see your screen

[@hueletpakard9929]

haha. good.

[@breacreative1009]

Where can I get that file that you drag over to the command prompt? It's not the one you put in the description

[@sandraamir6583]

yes i have the same problem

[@sors4r4]

same

[@isaacsampang]

Same problem

[@ZainabMajid-kx1sf]

Hello sir, thanks for the amazing video. My problem is that I do not have a command window, I have a powershell window instead and it doesnt work when using the same commands. What should I do?

[@randeep_RD]

Same situation here

[@skylifeseries6646]

open adb folder press alt+D then type cmd and press enter .

[@skylifeseries6646]

@@randeep_RD open adb folder press alt+D then type cmd and press enter .

[@prathithwadappi5050]

@@skylifeseries6646 WOW YOU ARE SO SMART

[@Rush-Hour-Rides]

thank y0ou my friend@@skylifeseries6646

[@blendypaffy]

error: device not found - waiting for device -

[@amarjit9375]

Can't download another apk with adb?

[@nimesh4557]

Amazing, this video, with your video on "How to Turn ON USB debugging with a Broken/Black screen ? | (NEW METHOD)" helped me recover data from my completely shattered phone.

[@shashankshekhar3791]

My lcd screen is totally broken off the phone with the ribbon wire. I can only turn on the phone I can't do anything further like unlocking screen. Will it work for me?

[@nimesh4557]

I'm not sure about it. It may or may not work. Make sure USB debugging was on. If not, Try the other video mentioned above. With that method if you are able to connect your display, then you can do it. In this method it is important that your phone is connected to a WiFi channel same as that of your PC

[@lashinabdullahthanduparakk3818]

bro my phone display gone so how can i connect mobile screen to laptop with display damage

[@leozendo3500]

I think it will only work if the usb debugging is on.

[@DEITYCOMING]

Yes there's no point of watching this video

[@said8059]

@@DEITYCOMING whats that? so i need to touch my screen?

[@DEITYCOMING]

@@said8059 yeab .. you need to access setting first to enable Debugging mode and to enable Debugging mode you need to have working touch screen xD

[@theamazingworldofgumballl665]

My android phone's LCD screen is broken and my laptop is a macOS how do I transfer my photos from the broken LCD screen to my macbook laptop?

[@johnpatrickalemania8018]

how can i open usb debugging when my phone is broken???

[@mandelaaa1103]

Exactly bro like tf

[@rpchannel5793]

@@mandelaaa1103 bhai whatpp ..pls imp data hai mobile me..7600241803

[@mandelaaa1103]

@@rpchannel5793 no offense but like I'm not Indian

[@shakulaka]

@@mandelaaa1103 i googled a bit, there are a shit ton of ways to do so. Nothing I wanna do at 4am tho..

[@rohangupta1542]

outdated files or it doesnt work. make a new video on windows 10

[@stevenm8970]

If your phone is locked with a screen fingerprint reader then how can you do this?

[@siddheshphadke3719]

That's my problem too :(

[@digitalgame659]

@@siddheshphadke3719 use kyc 🤣

[@sanyamjain9414]

unable to lauch what to do??

[@E-Power2023]

Debugging mode is off...not possible this method... Don't make peoples fool

[@mokiloke]

Yes i have no success, no devices shown. I think debug is off on my phone so this seems not to work

[@eliebordron5599]

watch this: kzbin.info/www/bejne/fYGtlIWVftSmo5Y&ab_channel=KhushangVyas

[@jostak297]

​@@mokiloke did you find any solution?

[@lucamariani4792]

​​@@jostak297 same, i need help

[@jostak297]

@@lucamariani4792 The best solution I found is to buy an adapter for the cell phone where it has HDMI and USB to connect the cell phone to a screen and the mouse to be able to see the screen

[@dough2018]

Hi I get this problem when trying to install Vysor👇 Error: device not found - waiting for device - Mu phone is connected to my labtop so what is the problem and how can I fix it? Please.

[@laluji4704]

I tried all your process , but it's not working on my phone .. it was good knowledge though ... Thank you so much 👍👍

[@rookie6159]

*but my usb debugging is not on but i just want to access the screen on my pc*

[@merrcurry]

i did everything as said but the apk file doesn't look like the one that is shown in the video and i cannot access command after copying the file in the adb... please help

[@inspirationalcontent5276]

Same thing happened to me

[@alexamstong6793]

For me also same thing happened... please give me a solution

[@KhushangVyas]

Skip the adb install step. Vysor will automatically install the apk so no need to install the apk file.

[@alexamstong6793]

@@KhushangVyas bro First thank you for the reply , I can't install the vysor , facing error ..... please give me solution

[@KhushangVyas]

What error are you getting ?

[@mrs7935]

first of all you cant access any device from adb if usb debugging is off ... secound if u have already on usb debugging then you have to allow your computer via phone and broken cant allow u........... this method only works in already authrized PC via usb debugging ...

[@mordecai1484]

Is there any way to do this if I'm unable to turn usb debugging on?

[@mordecai1484]

@Jameson Leon Who gives a F?

[@Tiffany-vq6ir]

Thank you so much! It is exactly what I need right now, my phone screen is completely cracked although it still responds to my touch. Your video is very concise and helpful, Thank you!!

[@ntunictech]

where is apk file ??

[@fearless3478]

Thanks bro I can recover my lost account 😂

[@tfsgamers7175]

Free fire aaa

[@fearless3478]

@@tfsgamers7175 I will not play free fire🤮 I am pubg player I recovered my lost clash of clan account

[@Pepepowah]

it says the device is not found, can you help pls?

[@wetruck659]

I don't see any device attached with 'adb devices' commend :(

[@wetruck659]

@Vehbi Aykan :(

[@victor-denisapostol5317]

When i type adb install *and drag the apk file here* in the powershell app, it says device not found, waiting for device, but when i plugged the usb in the phone, I heard that sound like it s connected. ANY HELP?

[@doublemaster1632]

device not found?

[@Thil92]

Driver might not working

[@santoshkokitkar9909]

I am not able to download apk file

[@rahulshah296]

My USB debugging is not ON. So Vysor does not show my device. How do I turn on USB Debugging on my broken screen phone?

[@dough2018]

I have the same problem, did you find a way to solve it?

[@kevalamanagamers9706]

For me its showing waiting for devices ... can you please tell me why its like that

[@abdoaoudid1203]

bro my phone has a code and i need to confirmation , what should i do ?

[@alejandromondragonperez804]

where is your second file?... I checked your links one by one, but this is not.

[@luckylucii6851]

Me too

[@aleighabush2130]

same! i cannot find the second file

[@ahmadagusalfani8327]

the sec file is the vysor for android

[@malak2858]

But how do I turn on USB debugging if I can't use my phone screen?

[@TheDumplingbandit]

you cant, you are just fucked, at that point

[@infinitegamingwithpiyush]

device not showing after installing the adb 1.3 or 1.5 and copying the apk in the adb folder.

[@anandunair2899]

WHAT TO DO IF USB DEBUGGING IS NOT ON

[@JH09SUMIT]

Aise zaruri comments pe reply nhi karega ye chutiya

[@zanajamal4328]

You can use mousce optical and otg connect to your phone then you can be able to touch your screen and tapping things while you can't on your screen phone

[@KhushangVyas]

Try turning on

[@_angela_mtvp_]

Sorry but I have a problem, they are a new version 3.1.4 of Vysor so the apk dont work? tanks

[@_angela_mtvp_]

The version is 4.1.77

[@narenrock3917]

Not shown my device on commend window.(but my another device show on commend window). how to turn on debugging my broken phone

[@delfinopassos5585]

this maybe can help you kzbin.info/www/bejne/qnKmmZijmriVndE greetings..

[@mokiloke]

Same here. is there a solution

[@fantome3365]

all most user don't use adb debug , and it impossible to turn it on in android device with broken screen , i think need to use mhl cable ...

[@KhushangVyas]

I have made a video on how to turn it ON on broken phone link is in the description

[@mustafacokguler5805]

amazing man. you saved my life. thank you so much bro

[@faizysahib]

where is the second file that you copied in the video? I can't find in your description

[@hellking496]

meto

[@thearithbun1565]

Hi Sir, I cannot open command in that folder. What should I do?

[@walidkessabi3742]

kzbin.info/www/bejne/mp-QYYZ9q554qsU&ab_channel=ChanchalTech

[@mrmaths5343]

thank you you saved my life . i would like to see new tricks in your channel thank you

[@harshbarot2880]

Thank you so much sir your trick is verry helpful for me

[@KhushangVyas]

Glad to hear that

[@shumayilkhizer1838]

which phone ?

[@emonibnymahmud1596]

Hey bro. IN vysor, When I haven't connected my phone, it shows that "No devices found. Make sure Android usb Debugging is enabled ".But USB debugging is not enabled in my phone... Because I Didn't know that my phone will be Damaged

[@AbidAliPakistan]

Same here

[@mangospike4453]

I cant use the adb devices command. It says adb is not recognized as internal or external command, operable command or batch file

[@lenovolo4840]

you have to open the command prompt where you installed adb, or add it as an environemnt variable

[@saranga6869]

Thank you bro. In different way I got access.

[@KhushangVyas]

In what way ?

[@aloakola5098]

I cant find the command promt opt in adb folder. Cant see the open command windows here Its said powershell is it okayto use??

[@KhushangVyas]

Yes use power shell

[@samardev3725]

@@KhushangVyas it is showing "device not found" and then "waiting for device" in PowerShell.

[@mustaphahoussemeddinebalio2053]

@@samardev3725 open normal CMD and type cd C:\adb then do the rest as the video

[@user-ew1js1ub9t]

Bro aa rendu application ala install cheyalo cheppu

[@nabilape]

Will it work even if the phone that is connected to PC (makes sound to declare that it is charging through PC) but does not detect in MY COMPUTER?

[@Saggybooo]

i have the same problem :(

[@gmrn3014s]

if it charges but doesn show the files that means the phone is either locked or closed try opening it

[@gmrn3014s]

unlocking your phone is your problem though cant help about it\

[@danielrezaee4801]

Please help, i cant access open command window in that particular file???, there is no alternative when i shift right click

[@ericasam3540]

Contact jet_hacker on IG for help ASAP he solve all my problems

[@ziadazhary7614]

press windows sign and R together >> write "cmd" >> write cd C:\adb