How to achieve a super high gloss clear coat

[@ThGrtCanadian]

For a drive-way job and not being fully prepped for this. I'm pretty happy with your results. Suggestion for those who try this, use a smaller sanding pad to help get more results and control around the corner and side of each panel and make sure to refine the sanding by going up to 3000 grit or 4000 grit before going to the next stage of cut polish.

[@jasonchicoine4282]

Narrated by steven hawking

[@BretBunton]

British Stephen hawking

[@zioxei]

Stephanie hawking

[@riskromer9773]

hahah great joke, still I prefer this robotic voice than mumbling low voiced idiot or an overhyped screaming twat

[@killacrush3437]

😂🤣😂🤣😂🤣🏆

[@mezo72271]

@@riskromer9773 hi guys, chrisfix here

[@Sheltieshangrila]

Good thing you had captions because I wouldn't have known what a Mecro Fibbiber cloth was.

[@rockandridge]

😂

[@matthewjensen9550]

miiIIIIICRO-fer

[@joelbusch6084]

Moicrouw foibahh clouth

[@4twny]

Nice job. Finally somebody who believes its NOT the number of clear coats that make it glossy.

[@shinola]

Nice video. I’d absolutely start with nothing rougher than 1,000 grit, though. If anyone is nervous about polishing (maybe it’s your first time and you don’t want to burn through the finish), sanding up to 5,000 grit before polishing helps, and never wipe the panel down immediately after you polish. Give the clear a second to reset.

[@scottwhitley3392]

2,000 is minimum I’d say tbh. Especially with the cheaper clear coats the DIYers (like me) use. Always start smooth then if need be go rougher

[@REVPOINT-INTL]

@@scottwhitley3392 The lowest i go is 1200 up to 3000 then polish

[@fitnessja7047]

@@REVPOINT-INTL what if I sand by hand

[@REVPOINT-INTL]

@@fitnessja7047 i sand by hand and DA

[@satan101101]

800grit by hand are fine if you sure that your clear coat are thick enough But using 800 grit on a da? That scared me too lol🤣

[@rafaelr.2228]

Does a pro job hiding the voice and the face. Does a pro job making the car look from a orange peel to a perfect mirror. Mirror reveals face. 😂

[@izaiahralph2774]

Sorry to be off topic but does someone know of a trick to log back into an instagram account..? I was stupid forgot the account password. I appreciate any tricks you can give me

[@izaiahralph2774]

@Leandro Gerardo Thanks for your reply. I got to the site through google and im trying it out atm. Seems to take quite some time so I will get back to you later with my results.

[@izaiahralph2774]

@Leandro Gerardo it did the trick and I actually got access to my account again. Im so happy! Thanks so much, you saved my ass!

[@leandrogerardo4554]

@Izaiah Ralph No problem :D

[@lex.cordis]

@@leandrogerardo4554 Do people actually fall for these fake exchanges? It's so obviously a marketing ploy.

[@MOAB-UT]

Looks much better but be sure to never wax fresh clear-coat and only use a microfiber towel to buff. I would definitely keep the speeds lower on that DA machine. Clear from a can will likely be very thin and if it wasn't baked/cured at mid-high temps, it is fairly weak so you will very quickly and easily burn right through it. Paint from the factory is baked at temps between 250-400F because the parts are OFF the car. Even a professional body-shop can't match those temps if the part is still on the car because other parts can't take high heat exposure (tires, electronics, etc.) That is why factory paint is usually superior.

[@callummatheson2379]

End result il admit was spot on but the process was long winded. Realistically that same gloss can be achieved by 1500, 2000 (or 3m trizact 3000 disc is my choice) then compound then buff. The meguires paint correction shouldn't be needed and never wax fresh clear coat for the first 4 weeks after painting as you risk locking solvents in under the wax since they can't escape. This can destroy your paint as the clear gasses out solvents for up to 4 weeks. Cheers

[@macpaz]

callum matheson Interesting info. I usually wait 2 days after applying clear coat before I apply wax and I'm happy with the results. Is it because I could be using a better product?

[@RawTopShot]

callum matheson Also never cover a freshly painted surface with poly sheet in an attempt to keep dust off your new paint job for the same reason. It can cause micro blisters, so you'd end up having to strip it all off again to start over.

[@servanttofriend8481]

Great info, fren. Thanks.

[@rhodesianwojak2095]

Ah

[@ediblemagician3688]

You must be blind there was still sanding swirls and little craters all over.

[@TheBrewster007]

So many "expert answers " good recovery from a disaster. With enough clear any paint job could be shined up . Well done good video

[@djjessiejames]

I did this now I’m making appointment to my local Body shop thanks

[@exoticwaves1580]

You did it yourself moron

[@eatmysh0rts]

@@exoticwaves1580 what do you think the video is for? Idiot. Lol.

[@DrAnderson1]

@@exoticwaves1580 - I KNOW, RIGHT? What kind of an idiot watches a KZbin video, narrated by Siri, depicting a guy buffing & polishing the clear coat (of what I assume is *HIS OWN* car, Siri never actually cleared that up) in (what I assume, again, is his *OWN DRIVEWAY,* *Damnit Siri* this shit’s important!) and thinks “wow, this result looks great! Clearly I have the same, or similar problem, or why would I be watching this video?? There aren’t any cats knocking full glasses of water off the table, or wearing slippers....no kids hitting their dad in the balls in a sports related accident....it’s not even funny at all...so, this probably isn’t something I watched for the entertainment value........since I have the same, or similar problem, I’m going mimic the instructions here in an attempt to “DIY.” If this guy & Siri can do it, I can certainly trust them. Surely no one would ever put this much effort into creating a DIY video if these products & methods only serve to make the situation MUCH worse?” Then what? They just go to Walmart, or Auto Zone, or whatever...and buy all of these materials, and attempt it on their own?!?! Who does that?? Like, who doesn’t have $300 to pay a body shop to get you that “super high gloss clear coat” like the guy in this video did for the car in this video? Some people are just stupid.

[@exoticwaves1580]

@@DrAnderson1 yep

[@buddysteve5543]

This guy doesn't want to be responsible for his lies! So no face or voice!

[@johnwren5516]

I watched the previous film to this when the car was painted from white to black . The fella stood on the roof of the car, poured 2 gallons of Hammerite over the car and just cut the drips off at the bottom when it dried 😂

[@ArcanePath360]

Everyone knows that's the best way to do it :)

[@DoubleDee-199]

@@ArcanePath360 Well that's only if you want a professional job.

[@ArcanePath360]

@@DoubleDee-199 Funnily enough I've done stuff like this in the past, when painting metal frames, a guitar or anything small. Hammerite is great shit for laying on thick without any undercoat or smoothing and just leaving to gloss up.

[@shevanbryan3549]

If some of the guys in these comments are so good, why are they even watching this video? My first paint job came out much worse and at least now I am a little closer to knowing how to rescue it in the future. Thanks for sharing this video.

[@rayrobinson3015]

I'm watching because I can't understand what they are doing here. Nothing makes much sense and it's sad to see DIY follow steps that will ruin a paint job beyond repair.

[@jonathantenorio8829]

I understand that some clear coats are trash specially if you spray out of a can. But if your going to spray out of a can atlease use a 2k clear coat. You gotta let the clear cure for about a week then you can start to wet sand with a 1500 grit. Using a sponge as a pad for your sand block. Then use 2000 grit finally use a 2500 grit. Then you can use a compound cutting from meguiars by using a buffer/polisher. Then use polish, wax, and finish wax.

[@АлександърЛюбенов-ю1й]

only wax 1 month after applying clear coat

[@jonathantenorio8829]

@@АлександърЛюбенов-ю1й I understand that sometimes you should wait a month till you sand down but if you wait a month the clear hardens and it's way more tough to sand it down. It all depends how much orange peel you get from using the clear coats too. There's too many pros and cons during painting process

[@AreskCSGO]

@@jonathantenorio8829 lol 2k clear out of a spray can its hard to spray.. u need to be experienced and even then i think u will get a orange peel

[@a.j.casper8873]

Id argue this till blue in the face. 2k clear out of can is trash, not better. I proved time and time again. Ot peels after a uear. Comparing apples to apples. 1k is 100% better out here of a can. Spraying with a gun is another story. Upol expert can clear is top notch for a can

[@nickevans3190]

Everyone on KZbin says the complete opposite to use 2K if you use 1K how are you going to get the deep shine and hardness of 2K using 1K??? ​@a.j.casper8873

[@BLAZETANGO]

I cringed at the fact that the door took a beating on the sanding and was not part of the process. Open the door(for those who are going to do this)

[@N.I.C.K.0.3]

The door isn't done yet if you look at it at the ending, he would do the same on that panel. He even said to do this 1m² at a time.

[@TheDim3s]

This is torture... i do not recommend this to anyone.

[@mikeseymour5398]

Amateur video

[@droptiveedm515]

Lmfao!!!

[@ahwaz.car.paint..3014]

TheDim3s for better job i sanding with 2000 paper..and finally 3000.and polish with polisher.than wax by hand

[@ahwaz.car.paint..3014]

2000 and 3000 paper..matador sand paper for best qulity ..

[@carpaticaccarpatica6267]

Same

[@AlexRoza]

I finished my today with 600 grit 1500 grit and 3000 grit all in wet sand all the time by hand, don’t leave it dry when working on. Polish = wool + tru-grit / 3 types of foam pad + CarPro Essence Xtreme Gloss Enhancer, will see the amazing results.

[@rickyjohnson974]

Or don't use a paint roller to put on clear coat 🤦

[@Lucas_Shaolin]

He obviously used a spray can to paint with as the lower and uncontrolled spray pressure causes orange peel especially if you paint outdoors. He got the results he was looking for and pretty good for not in a booth and rattle cans

[@marcellvarga4569]

@@Lucas_Shaolin normally spray can paint jobs turn out much much better than that.

[@mattsez2879]

didnt help it was snowing.....entire vid is a disaster

[@Imissthefuhrer]

You’ve obviously never sprayed clear. otherwise you would know, no matter how good you are you will get some orange peel.

[@marcellvarga4569]

@@Imissthefuhrer yes, some. But this paint job came out absolutely terrible

[@CiurAKn]

Just sand it with 1000 - 2000 - 3000, and use 3m polish, and for a perfect shine after a regular polish use a ultimate compound polish

[@JonSmith-cx7gr]

I have managed to compile all the useful info I have gleaned from the comments of various vids on bodywork: Apply filler to any cracks etc in item. Sand item with 400 sandpaper. Spray some primer over item. 3 coats. Light coat. Wait 20 - 30 mins then another heavier coat, 30 mins wait then final coat. Wet sand with 600 wet and dry to ensure smooth finish pre painting. Let dry. Spray the item. 3 coats. Light coat. Wait 20 - 30 mins then another heavier coat, 30 mins wait then final coat. If desired, wet sand with 800 preferably by hand with sanding block and let dry. Apply clearcoat - preferably 2K. Minimum 3 coats. Not too light. Not too heavy. Allow ample time to dry (at least 24 hours) Wet sand the clearcoat with 2000/2500/3000/5000 by hand with sanding block (or just 3000 and 5000 if finish is already nice and smooth.) Be gentle. Rub with rubbing compound preferably with a machine but by hand if necessary. Be gentle. Buff off. Then apply a polish preferably with a machine. Buff. Wait a few weeks before applying wax to give the clearcoat time to release all chemicals. Wet sand eyeballs with 9000 grit sanding block so you can see clearer. When someone tells you you did something wrong, dry sand their head with 1 grit paper aka a rock.

[@ponsaravanan]

This is the great answer and works even if you make few mistakes. I do apply a clear coat after sanding with 1500Grid

[@fyzallyfe2210]

How long actually we have to wait for fresh clearcoat to cut and polishing?

[@JonSmith-cx7gr]

@@fyzallyfe2210 At least 24 hours preferably.

[@VenomWorks]

@@JonSmith-cx7gr where could I find a 10 grit sand paper? I don't want to kill the guy.

[@alexaguirre3924]

hey man i know your comment is a little old (lol) but i have a couple questions... so i sprayed my car with acrylic urethane paint and im not sure if i must apply a clear coat or if the shine is already in the paint?!?! hope you see this and can help me!!!

[@russohj]

This radical sanding might work on black, white, or basic solids, red, yellow or blue. But on a mixed color, especially a silver or gold hue, there is a very likely chance you will get a highlighted edge which is impossible to acceptably repair without repainting the area edge to edge. Easy on a fender, not so much on a door.

[@bdtcrypto1542]

using high solids (expensive) clear coat gives you a HUGE leap forward and prevents runs and make it a LOT more glossy using the exact same techniques as production (cheaper clear) however we cant use that on every job but if you're doing a home or one off project, USE THE HIGH GLOSS clearcoat it will make you feel like a better painter

[@tipr8739]

Do you have any recommended products or brands?

[@MrShazaamable]

@@tipr8739 id like to know too

[@The1Music2MyEars]

@@MrShazaamable Spraymax 2k in a can. It has isocyanates like all 2k's so you have to wear a mask with a charcoal filter and some eye protection since you don't want the 2k cloud to be anywhere near your eyes. Also wear long sleeves.

[@strikeeaglemodels1588]

Only 3 passes with 2000 grit is nessasary. Using lower grit will cause scratches that the rotary polisher will struggle to get out making the job 10x harder than it should be. Great results in the end 👍

[@Finetouchautopros]

How many passes with the 1000 grit

[@neitzche1245]

Wipe well with a my-craw-fibber.... lol.

[@brianroberts5616]

Thank you... that was very helpful

[@mcanzy]

From that - twe thiss - from that - twe thiss. Thiss video hass both subtitless and a AI'sssss. Note : in a Human way your comment is underrated. P.S. This video is actualy helpful and we are making jokesss

[@goodtrip4201]

My-cal-freabbba

[@neitzche1245]

@@brianroberts5616 just a joke, relax.

[@MRSLAV]

Lol, dont sand it with 800, its too big.

[@nijeshkoyyam]

MR SLAV it's based on how thick is the clear coat

[@NeoJSsk]

I agree

[@nijeshkoyyam]

Agree with?

[@critical_mass8279]

Too big as in what, too course or not course enough?

[@norbertnn6344]

MR SLAV 800 on a machine is like 1600 by hand, not sure if that counts using that buffer though :)

[@gracebyseven]

Great job, don't let these loosers with their hate spoil your video. The results speak for themselves, keep it up!

[@rolandoresurreccion8216]

this is simple and straight forward just what i needed to see. the comments below suggest use up to 3000 to 4000 grit..even 5000 to help with the polishing? also dont go lower than 1000 grit.. but the video seems pretty simple 800, 1500 then 2500.

[@mercury0214]

For anyone watching this this guy smoothed his clear coat by taking it all off!!! Wet sanding with 1000 grit for 30 second by hand is enough to remove clear coat

[@albertoascari2542]

Nice looking old Renault Megane by the way

[@crazyforblues1967]

How about spray it correctly to begin with? Am I the only one who despises these robot voice narration videos??!!

[@cid4887]

you don't get the point of his tutorial.

[@famousforever8556]

Island Mike wow, triggered much? Chill my man, no need to go to that level.

[@famousforever8556]

andrew c Many cant afford the equipment to do the fine mist job of the spray guns/large compressors. It's good to see that there is hope for rattle can painters who are just trying to make their cars look less like the bucket they can afford. Look at the big picture before slamming a dude who is nice enough to share for free. It really is a great video.

[@carlosb1]

It is a video about how to fix a fuck up :)

[@Whatinthewoke]

Chill out guys!!! It would help if the stupid thing would say the words correct then people don't get fucked off with the videos

[@raysonsarmiento6079]

Great job I dont have a power tool and just spent 4 hours sanding and polishing my cars fender

[@davfin8920]

I genuinely thought it looked good and I might follow these steps for my S10 with faded red paint

[@AbAb-nx2zy]

Hell so many products and steps you have used. Last three steps were sufficient.

[@BoostedST]

Too much compound on your pad, way too fast on passes and definite don’t use 800 grit to sand

[@paintwizard1157]

kzbin.info/www/bejne/fJ23iJRnbbOIitU

[@phf1179]

书中自有黄金屋 BKR probably could have responded in a softer tone for those who are sensitive. The correct and very helpful information BKR stated will help others follow effective procedures .

[@perryberens618]

Good video for common garage paint jobs. I am very envious of those paint shops with climate control, Air exhaust systems, humidity and dew point controlled. Heavily filtered and climate controlled compressed air coming to gun. However, It's good to see a person use same products as those shops use, when things go wrong.

[@mikepawlikguitar]

To cut after sanding, use Meg's M105 or Ultimate Compound and a microfiber cutting pad. Then, follow up with Meg's M205 or Ultimate Polish on an orange polishing pad.

[@tomzeedee]

I would be very happy to end up with a result like that , considering how it looked at the start..

[@rynechristesen2392]

I would say you could throw in Meguiars polish after the compound. That’s how I did my car for a full detail. Then top it off with the liquid wax. Still a fantastic job! I’m gonna attempt this on my wheels with a rattle can job.

[@roelflores8301]

Sometimes 800 grit is necessary when the painter applies some really hard clear haha I recommend testing finer grits first before going straight to 800 grit

[@mikeseymour5398]

All you need is 1500 + 3000 and buff it down with a wool pad with compound then use some Polish with a foam polishing pad then go back over it with a swirl remover with a softer foam pad

[@TobyStation]

I admire this guy...well done brother

[@albertoascari2542]

Actually most my paint jobs got orange peel look as they call it😂😂.I always think stand way back squint and it looks ok 😂😂

[@demarcusdenham8650]

I like your style of tutorial video and caption 💯 clear and straight to the point

[@spyrosbellos2522]

is it really that hard to get a spray bottle?

[@mattslater2165]

Great job. Spray on the clear like the surface of the moon then sand 99% of it off with harsh abrasives. Awesome!

[@theeekobreeelo1186]

Ha ha ha

[@cecif9419]

Wow nice. Can you make a video about how you blended the paint and clear coat to the existing paint ? You have a lot of videos - organizing them into playlists would make them easier to find. Thanks

[@YamiIsUsagi]

Hello sir i don't have that machine tho can i use just a hand?

[@jhewitthunt]

wow! very impressive. The before is exactly what i'm trying to fix. So i'll definitly be giving this method a go. Thanks!

[@borislavandonov2893]

It is not only you

[@breakingthemasks]

How did it go.

[@markforeman91]

Did the plastic you used to protect the garage floor blow up into the wet paint or something? I have NEVER seen an alligator skin paint job before. How the hell did you get it sooo bad? My son is a car painter and matches the orange peel texture on the panel he is painting to the rest of the car so you can't tell it was painted. It is all in the quality of gun, air pressure and so on.

[@beanwellnkhata8092]

The end result looks good.

[@harley092355]

It’s always amazing the profanity and hatred on the web--pathetic.....

[@danlc95]

KZbin cements section is the sewer system of humanity.

[@jradish]

shut up

[@cheeyaowan2500]

Are you using DA polisher in the video?

[@raymccarraher193]

Worked great i handsanded insread and now my panel looks in honesty 90% out of 100%

[@rockefelleragent1357]

Hand sanding is the most difficult and energy robbing work. Get a sander with assorted disc pads and a rotary buffer.

[@RICHIE_RICH89]

Audi has amazing paint my s6 v10 is a 09 and it shines better than any car ive seen just like a mirror , Flawless clear coat its unreal every reflection shows its like water on paint.

[@drayduffy3121]

The key is apply the clear coat let it dry over night wet sand it smooth then do the compound stuff twice t cut then Maguires to finish off and it does work but u have to do more elbow grease than this video shows I know cus I've done it

[@chicanoforever9005]

AWESOME JOB BROTHER!

[@KJ7JHN]

What voice are you using? Sounds good.

[@socalRooster]

How long after a paint job can you wax doesn’t the paint need time to vent

[@mikejoseph9798]

Yes the paint needs at least 3 to 6 weeks to cure. If the car is always in shade or in a garage it would take longer to cure than if it were exposed to sun everyday

[@socalRooster]

Wow two years have passed and I’m watching this again.I have to say you showed me what not to do to achieve a mirror finish .thank you for posting

[@SonOfTheDevil666]

Thans mate I’m working om my sisters motorhispania rx 50r and I’m having the same problem with the paint

[@flavoursonly]

Did u use a dual action polisher for this or an orbital sander? And what speed setting

[@KaarelMaaler]

What about edges of the door? It's pretty easy to sand through the clear coat and the paint with the machine and 800 grit..

[@AchillesWrath1]

Do it by hand and be very careful.

[@stephanriley5304]

Quickest way to destroy your clear coat ( 800 grit ) lmao

[@CCGDude]

So you polished it twice?

[@lushendattebayo8006]

Wonder what is happen after washing the car using car shampoo, will it reflect after buffing?

[@joebrainmen3038]

Think is tho u have to always wax it now. Did u put a clear coat on or just gloss black.

[@christianslense455]

This was like watching a gorilla polish out a car. The moldings weren't taped off. He went into different areas with different stages. It was like watching a kid w fingerpaints

[@robars1575]

Thanks a million! Just what I needed.

[@compound00]

Now that took a long assed time on such a small area. Youd take months to do the whole car at this rate.

[@als3449]

It came out good would this work with a high gloss finish that doesnt have clearcoat

[@kevinarcher7701]

How long after spraying the last clear coat should you wait to do this?

[@perjian1697]

If it's rattle can spray it will tell you on the directions the curing time. If it's a paint booth sprayed clear wait 30-60 days before sanding for best results. But can be done sooner just to improve a severe orange peel.

[@matthewevans5091]

Great job ! Rear wing looks better than the rear door.

[@antoniorsoftware]

How much do all these chemicals cost ? It is not worth it for a small fix.

[@joebrainmen3038]

Ive just dun my rear gti defuser ill do this even tho its already like glass. Good video. N well done painting all that cheaply.

[@miguel7905]

What's the name of the tool he is using, pls and thank you

[@JV8391]

a polisher......

[@techqmarket]

Can u told me the product name...and sand paper ....

[@AdnanKhan-uc2hg]

Doing it by hands 🙌 is the best ✌️

[@martinbasha1267]

So when do you exactly do that? At the same day or after few days of painting witht the clear coat?

[@richardvega1213]

I believe you have to wait at least 24hrs after the clear coat was applied. So you don't damage the clear .

[@Columbariusify]

How much time vetween polish and wax?

[@iman80skid91]

What caused the clearcoat like this in the first place

[@breakingthemasks]

Brilliant video! Precisely what I needed to see, and clearly showed all steps. Massive thanks man, definitely a huge help to me. Cheers!

[@griffgainey1366]

Had a small area do this after applying my 2K clear when I installed a new corner panel on my JK. Not too noticeable since it’s gonna be covered by the license plate bracket. But may try to correct doing something similar. I feel like 800 might be a little too rough to use.

[@iancampbell6925]

Should hae raised the tailgate to protect it from sanding.

[@Cramos69Matt]

Beautiful wish I felt comfortable enough to do something like this myself

[@gtx332]

you get comfortable by trying

[@ryanjones3498]

@@gtx332 This guy gets it.

[@edstimator1]

don't let anything but fear and common sense stand in your way.

[@apostolisr8556]

Just a question… If you spread 3 layers of clear coat and then you are doing this actually you are removing a layer from the 3?

[@chefboypardee4855]

Good instructions but some constructive criticism. Before even applying clear make sure the shiny spots from the paint are gone or at least even throughout

[@borneorinukutrukutvlogs1588]

Sebenarnya tidak terjadi sebegitu permukaan clearcoat, ini di sebabkan jarak spraygun salah, campuran nisbah pada 2thinner pun salah. But its ok, sebab kawan ni cat kereta DIY saja dirumahnya.

[@TheAfterHoursLV]

Need to get my hands on a micrawfler.

[@victoriaglaittli8922]

😂 I thought the same thing

[@TheAfterHoursLV]

Victoria Glaittli - 😉🍿

[@TheAfterHoursLV]

Victoria Glaittli - I found an eBay account that sells used micrawflers any color you like. $60 for five and only $100 for eight! I’ve already ordered five for myself...all periwinkle. Want the link?

[@raymondsmith6315]

Had bumpy clear coat before, now he has shiny bumpy clear coat.

[@bigdog4375]

Did anyone else notice the big pits in the finish when the camera zoomed in around the 5:55 mark?

[@zollieh]

It's a spray can job.

[@serenesoundsx8027]

bro i love u for this im about to go try it right now i have the same problem

[@hawkwarrior5066]

Hello do you have a link for the polish set

[@stenhouse8569]

End results were fantastic

[@tomh6598]

will turtle wax rubbing compound work?

[@gkewley42]

Where can I buy on of thise mercrabffir cloths?

[@nickwhite657]

No need to go with 800. Just go with 1500/2000/3000 Also you are to fast with the machine. It doesn’t help the compound and generate enough heat to help the clear spread through the scratches.. spend more time with machine going side to side slower and overlap slightly and you will get better results. Instead of going at it like bull in a china shop :)

[@francisralte4194]

how many products are you going to use man😂

[@adamxaan5938]

I went and got all the things tried this but did not work? Not quite too sure why

[@blue98stang]

That narrator always reminds me of the chick from subnautica. Beep beep: 30 seconds of oxygen remaining. Beep beep: oxygen.

[@Dg-zj6jo]

nice one how did you do the voice over please

[@unkelartgarf3792]

He paid a local female Dalek.

[@lee-oswingelderbloem908]

I would never sand black with 800, but then again it depends on how bad the paint work is.

[@jonnyharris2724]

I didn't know siri did paint correction now?

[@captainkaos754]

Johnny Harris. Siri also does gender correction