How to Add Light to Fabric and Textiles (VynEL™ Illumination Technology)

Jared Lichtenberg from Ellumiglow.com shares how VynEL™ can be easily applied to textiles and garments with heat bonding or sewing.
The advantage of VynEL™ lighting is the amazing customization that can undergo for wearables, outdoor products, safety, automotive, advertising, consumer goods and more. If you are looking for light up fabric, led fabric or fiber optic clothing, VynEL™ should be your answer!
To buy samples of our off-the-shelf inventory, visit: www.ellumiglow.com/electrolum...
Contact us with your custom VynEL™ project!
Music: QSTN - Chillhop Essentials - Winter 2016 - "Me 2 You"
chillhop.bandcamp.com/track/m...

[@RandomRickyShow]

Fab editorial guys, got my creative juices flowing :D

[@EllumiglowPage]

Thanks, Glytch! Feel free to call or email us if you have any questions.

[@tyroneleak5673]

Ellumiglow I will be buying this soon! Please keep it coming!

[@TheMediaMachine]

I have been designing first stages of baggy jackets and other clothes wear with idea of adding lights too. I knew it was possible but I just didn't know where to look and how it can be down. Glad I found this video. I see in other replies to comments that you can customize too, so I am going to find out more from your company cause this is a game changer for me for my clothes wear designs.

[@EllumiglowPage]

That's a great idea!

[@user-pm7gb4lu7n]

Future of dress

[@MermaidKalypso]

Cosplay 😍

[@Mutex_Lock]

this is amazing, what’s the smallest strip size you guys have? I wonder if i can use it for 1/6 scale action figures

[@EllumiglowPage]

You can find a link in the video description for all the off-the-shelf items we have. You might try the 1cm x 1m strip (which potentially could be cut in this scenario).

[@Windsais]

This looks like a very awesome product! And I just ordered 4 strips. I am interested in sewing them all on one costume in different locations. Would I have to modify the powerpack to allow for all four strips to plug into it if the wires were not all end to end, and coming from all different directions to meet in the middle? Are there extension wires I can get from the powerback to the lights or do I need to make them? And if I cut the light can I attach two or more to the same lead line and then directly to to powerpack? Can u send me the directions to crimp and solder another connecting line? Or is it the same as the tape method? Thank you so much!

[@EllumiglowPage]

Awesome! Yes, we do have exactly what you need to make the connect in parallel from the battery pack. If you check out our "EL Accessories" page, you'll find 4/1 splitters, extension cords, etc. to help make the installation a cinch! To download the cutting and connecting guide, visit the Electroluminescent Guide at the bottom of the website and navigate to the VynEL section.

[@Windsais]

@@EllumiglowPage thank you so much!

[@joey74261]

What kind of patch must be used for the light to shine through?

[@ego2112]

Hacen envios ala Cdmx ?

[@niloufarziaee2766]

Hi, I tried to reach out to your company via email, instagram and facebook. No response in any of them. What is the best way to contact you from Canada?

[@jamesbuchanan6340]

Do they have any in orange?

[@Rokeno007]

I am really intrested into this product, but i have a simple question, are the lights able to be customized in any way for example: to only light a part of it

[@EllumiglowPage]

Great question. We can customize nearly any shape, size, or color of the product. So yes, it could be custom made in various logos, shapes, etc.

[@studiocolrouphobia]

Very interesting, especially if there is a possibility for test runs (small batch logo test to see if full scale production would work). On the website it looks like you only do customisations if there are huge orders?

[@EllumiglowPage]

David Sondered we can run as little as one piece for testing purposes, but are able to accommodate nearly any production volumes required. If you would like more info, please feel free to send us an email to [e-mail] and we will be happy to help with your project!

[@mostwokeshow3548]

@@studiocolrouphobia how did things work out for you? Did you buy? Do you love it?

[@davidsondered]

@@mostwokeshow3548 i haven't been able to buy it yet

[@davidlopanful]

and military usage

[@DAGGR]

welp. Now I know how to make a tron legacy costume

[@ethanleung4091]

Idea: Spider-Man 2099 (ATSV) suit with light up red parts

[@k1ll3rkoala]

If I were to cut it (to make a 90 degree turn on the same surface plane) would I be able to use the crimp connectors that you sell? In the same way one would use it on the other versions of EL tape that you sell?

[@EllumiglowPage]

Yes, if you would like to email at info @ Ellumiglow.com - we will email you a connection guide.

[@k1ll3rkoala]

To be clear, I'm more interested in the flexibility than the water resistance.

[@EllumiglowPage]

@@k1ll3rkoala yes. No problem to do that. You basically cut and miter the edge

[@k1ll3rkoala]

Email sent.

[@kcarew2]

Can you put the clothes in the washer with the VynEl attached?

[@EllumiglowPage]

Yes you can. We recommend cold wash (hang dry).

[@kcarew2]

@@EllumiglowPage What does it cost by the foot? I used EL wires on my kid's Halloween costumes and the pain was spending hours hand sewing and not being able to wash the clothes afterwards.

[@EllumiglowPage]

@@kcarew2 We sell it in a number of different preset shapes and sizes. You can view the available shapes on our website at ellumiglow . com. You will see a category for VynEL and take a peek at what you would need. Keep in mind the battery packs would need to be removed before throwing in the wash.

[@themostrandombird]

Want to be added in a mermaid tail can it work underwater

[@EllumiglowPage]

Yes. We would recommend the VynEL Splash product. It is our most waterproof solution. Make sure to NOT cut the product for longest lasting results. We can also custom make panels to if your project requires special shapes.

[@Zasalamel997]

I have one question. Can it Shine in different colors like purple, UV purple or Dark purple ?

[@EllumiglowPage]

Technically it can shine in purple, but purple is going to be one of the dimmer colors. UV is not possible with VynEL.

[@swagg9373]

How do i contact you guys. And do you offer student discounts

[@JustinMetras]

please send us an email to [e-mail] - We may be able to offer an education discount

[@CarlosMoreno_h]

Are you available to ship outside the US ?

[@EllumiglowPage]

Yes, you can view our products online, and email us at [e-mail] with your full shipping address and we will send you a quote with shipping.

[@shivansh2665]

Can u plzz tell the rate of 5×5 metre of this material

[@EllumiglowPage]

These are made similar to screen printing a t-shirt, and the largest panel we can make based on our tooling is about 1x2m. However in most cases like for wearables, you'll be better off making smaller pieces which we can die cut and print logos, patterns, etc.

[@zeronight12345]

can you wash the clothing once sewed on?

[@EllumiglowPage]

Yes, you can machine wash, or dry clean once applied. Heat bonding is a preferred method of attaching which keeps better waterproofing of the material.

[@zaka294]

Where I can buy it, do these things get charge by battery or some?

[@EllumiglowPage]

Please check the link in the video description to buy our off-the-shelf products. It is powered with EL Inverters, either battery operated, or plug-in.

[@kiaraandrada8827]

can you cut it and have it still. work ?

[@EllumiglowPage]

Technically yes. It will continue to glow to the point where you cut it. We recommend sealing the cut edges with glue or tape to ensure no moisture or debris can get inside. The waterproofing will decrease once cut from the factory seal, so if you plan to make custom shapes in a production part, we highly recommend having us custom make a panel to shape. It can be made in virtually any shape, size or color.

[@junaidqamarudheen]

Is this available in Gulf??

[@EllumiglowPage]

we ship worldwide, yes. Feel free to email at [e-mail] so we can further assist.

[@dspsir]

I want to setup business of this product in india please help me

[@EllumiglowPage]

Please email us at [e-mail] (info at ellumiglow dot com) or fill out the retailer form at ellumiglow.com/retailers - Thanks for your interest!

[@islamansour]

How to order ?

[@EllumiglowPage]

You can email us at [e-mail] - You can also contact us through our website, links are in the description, and can be ordered directly on our website.

[@SRAVANKUMAR-zv6pv]

Can i get the sales contact

[@EllumiglowPage]

Please contact [e-mail] for more information.