Needed this, thank you! Tried a turn and a half and will see tomorrow if that is enough.
@sayeedrehan3 жыл бұрын
I have a 2012 Audi A7 with the full led headlights. I do see the adjustment screws, my question is I’ve seen some people say you need to adjust through VCDS is this true? Or will I be fine adjusting via the screws?
@FelekPL3 жыл бұрын
My logic is that if they only wanted people doing adjustments through the computer, why would they put the screw? You can use the screw, but yes adjustment through VCDs is possible too.
@abeibrahim58465 жыл бұрын
Hi, Thanks for the video, BUT :-) the car needs to be 20 ft. away from the wall, then you measure the distance from the floor to the center of the headlight lamp; go to the wall and place a mark (blue tape) on the wall with the same distance from the ground and adjust the top of the beam to the marking.
@FelekPL5 жыл бұрын
Hi, yeah I know what you are saying and thanks for explaining. I'm just showing how to adjust the height, not how to set proper distance. I've also seen that sometimes measured height is not good enough
@cliveyoung36195 жыл бұрын
And this is why people on the road get blinded. Look for the markings on the headlight. Most are 1.0 % . At 20 ft the top of the beam should be 1% below the level of the centre of the headlight. So 2.4 inches
@FelekPL5 жыл бұрын
If they don't have a brain then they set the lights super heigh. I'm just showing people how to adjust the lights, not necessarily what the right position is. It also depends on where you live - flat vs mountain region
@FelekPL5 жыл бұрын
Thanks for the exact directions, measurements.I honestly d didn't know them
@MehmetresulOkutan-fu5on3 ай бұрын
Thank you very much my brother
@jobycondron70994 жыл бұрын
Did you get a code after adjusting the screw?
@FelekPL4 жыл бұрын
No, it's physical adjustment, shouldn't throw any codes, unless you have some system integrated with lights?
@jobycondron70994 жыл бұрын
Felek, not that I am aware of. It is a 2016 a4. I lowered it 1.5” and I have tint on the windshield and I can’t see at all tonight. A buddy told me I might get a code if I manually adjust without using a scan tool 🤷🏻♂️ it’s been keeping me from doing it. After watching this and you saying you didn’t I’m gonna go ahead and give it a try
@mjayqueezy42252 жыл бұрын
Does this work on a 2013 Audi A6
@Dan-lm9uq4 жыл бұрын
Hi , do you know if its the same in the UK? Meaning counter clockwise to raise the lights?
@FelekPL4 жыл бұрын
Pretty sure it is the same.
@BA-nu9zz2 жыл бұрын
Thanks very useful for me
@imxd16986 жыл бұрын
Keep it up bro plz make more videos
@benjaminsveda9383 Жыл бұрын
Thank you BRO!
@NOBRAINNOLIFE01102 жыл бұрын
Thank you
@MKasap-te8vm3 жыл бұрын
Dear, I own A6 2016 Turbo Diesel. My car has automatic height adjustment. But it does not work(height). In does not adjust.
@ki-zu Жыл бұрын
Did you get this fixed? I have same issue on A6 2018 TDI, Can you tell me how yours went?