How to adjust settings S900 computer display on XF900

[@josephwoehlerii2855]

Clear and concise, thank you for the best explanation and demonstration that I've seen to date. Merry Christmas!

[@motorman857]

I have a Cyrusher Kammoda. The throttle is very abrupt. Is there a setting that would make the throttle less sensitive?

[@cyrushertech]

Unfortunately there isn't a setting to reduce the throttle directly, since the Kommoda model also has smaller wheels, it tends to have more torque when engaging from a stop. If you reduce the Top speed setting, it by default would reduce the speed of all PAS numbers, so you could make PAS 1 slower by this method, but your top speed would be less.

[@noth1ngtoge1n]

Is there a built in light in the display box? Or do you have to add a light to the display and if so how?

[@daiyanmajid1592]

Hi there, I have the xf900 but it got damaged when I had an accident. I brought the sw900 display and I wanted to ask whether it's the same and compatible with the xf900's controller.

[@kafkent6727]

Hi, are these settings the same for the new color display ? Thanks

[@kappazeta47]

Does anyone know how to reset the factory settings?

[@colinwhite144]

My sw900 goes to number 20 p18 show speed proportionl range 50%to%150% in setting up p7 speed magnet range 100 person I've got 750wat hub fat tyre bike after altering display it's gone from 25mph to 55mph bike came with 22amp controller bought 30amp controller came with sw900 36v display of but when I set up display and leave for a few seconds it goes of it did that when settingso this 36v is OK for 48volt up display how do I keep it on for long time thanks

[@Christopher-115]

Hello my question is I bought one of the ecotric bikes and it came with one of these display and then the bike was close to dying and display popped up blinking battery now I plug it in the charger and the bike battery fully charged but the screen shows one solid bar on near empty how do I make the screen all the way full charge again like youres is

[@cyrushertech]

So from what it sounds like, the display might be faulty or your settings might be needing to be checked. Typically, you just charge the battery and when it is full, the display will show the battery bars. I would recommend checking the settings, then contacting the company for more support if all of your settings match their defaults.

[@papawolf60]

To engage the cruise control press and hold the down button for how long? I tried it about 3 times on my way to work and 4 or 5 times on my way home from work. It didn't didn't engage.

[@cyrushertech]

So the Cruise control should engage within a few seconds of holding the button. I believe the max speed is around 3mph though, so what I would recommend is starting from a full stop and seeing if the mode engages. Some of our employees refer to the mode as cruise control, and some refer to it as walk mode. If using it as a cruise control, it is mostly for learning purposes, as the fastest it will go is up to 4mph.

[@markbutler9291]

I think this is a 'walk mode' option not cruise as in the feature most cars have. SO for example if you are ousbing the bike whilst walking with a friend, flat tyre etc you can engage this low speed 'cruise' setting to help you push the bike up hills etc.

[@rebootcomputa]

anyone knows where can I get a tempered glass to protect the display? thx

[@mehmetkan1773]

Hello, I have a 2000w bike, but it does not even reach 40 speeds, the screen is SW900, what should I do to increase the speed?

[@Johnjones0151]

In your black bag you got with the silver box with colour coded wires and clips just unclip the single blue wire it will double your speed m8

[@20anonymous03]

Please help me ..I bought this controller from Amazon to exchange for the s866 that I had on my fat -e.bike, the problem is that it gives me an E-10 problem and the bike does not start .. I put the s866 back and I have no errors ..

[@cyrushertech]

Sorry to hear about this issue, if you are looking for more in-depth support, we do have a support team based in Utah that can help you diagnose the issues with your bike. If you fill out a support ticket using this link here- www.cyrusher.com/pages/contact, our team can help you look into this issue.

[@mxleskxng]

PLZ HELP!! I BOUGHT FROM FACEBOOK MARKET: If my battery goes down when i change it to 48 volts does it mean my battery was bad? it shows only one bar when i do and i just fully charger it.

[@cyrushertech]

So it sounds like your battery could be bad, one thing you will want to check is also the battery capacity in Amp Hours (ah). On the bike models, if the screen is showing one bar or low voltage and the battery is charged fully, then that could mean that your battery isn't compatible with the controller. For example, a bike with a controller built for a 20ah limit would show that a fully charged battery (17ah) is only at 80% when in reality the battery is fully charged.

[@tim0n243]

If i buy the 250w Version with 25kmh speedlimit, is it changeable via this Menu Or is it set by the Controller? The support Said on both models it is exactly the same motor.

[@cyrushertech]

We do not have a model with a 250W motor, to view our bikes please visit our website www.cyrusher.com/

[@Tiger-qp8mc]

hi is there a way to reset all settings to the default?

[@cyrushertech]

I believe that the computer manual's last setting should perform a factory reset. It does depend on which generation of XF900 the bike is though. The manuals and settings can be found under our website help center- support.cyrusher.com/en/article/cyrusher-xf900-assembly-guide-1cileey/

[@Tiger-qp8mc]

@@cyrushertech im not sure why my settings don't have a p18 for the factory reset my display only goes up to p16

[@reintecsaperu3073]

mi bicicleta tiene hasta P23 me gustaria saber para que sirven las demás opciones

[@MegaTwoL]

Encontraste solución? O información

[@dmalugani]

Hi I'm from UK can you make the xf800 and 900 do 28 mph in the settings

[@cyrushertech]

Thanks for reaching out, for top speed settings, there should be an option to change them up via the computer system on each individual bike. For the UK, I don't believe anything more than a Class 1 ebike is allowed on the streets, but for personal use, you should be able to unlock the motor and get the top speed from it.

[@TerkelNL]

Hi, does the XF800 have the same settings ?

[@andykeast8920]

Yes. The main difference between XF900 and 800 are the front forks. The 900 and 800 controls/bike computer is the same. I got the 900 and it’s superb. If you want a slightly smaller bike, then go for the 800. Both excellent bikes.

[@TerkelNL]

@@andykeast8920Thx, i orded the XF800.

[@fabiomarras8777]

Ciao il voltaggio si puo' inpostare a 36v su quel display?

[@mtbhillbilly]

Yeah

[@macheted01]

Hey there, this is the second video that I have seen for the S900 that shows different features for it. Is there an update for these to get these options, or is it a different generation controller? Or are they just set up differently for different make bikes? I have an S900 on my Ecotric Fat Tire 20, but it seems like it has different options.

[@cyrushertech]

There might be different versions available for the screen, but I am not sure. Sorry!

[@eddytholland]

i'm in the same boat here. i have the ecotric hammer 26" fat tire and it doesn't have nearly as many options in it, as well as, they're kind of out of order in the later menu. i feel like i have less control over it...

[@michaelhart5070]

I put my speed limit at 100 and im still capped out at 25 what gives?

[@cyrushertech]

Depending on which country you are in, some of our models come equipped with a speed limit cable to comply with legal standards. I would check with the online webchat and see if your model has a speed limiter on the controller.

[@michaelhart5087]

@@cyrushertech I upgraded my Walmart movello 250 what 36 volt E bike to a urban rider 7 speed electric cruiser 48v 500 W and now I'm able to get 38 km per hour at pedal assist level 5 but my battery drains faster at full throttle. Still massive improvement in torque.

[@user-sh4mi4gq3i]

You left out number 9

[@richardmunn3571]

Sadly, after buying, I learnt that you can’t peddle without PAS and use the throttle when you want to. You’ve confirmed that P10 is disabled. Unfortunately I’m returning the bike as this is a game breaker. It’s too restrictive for the consumer, and it’s the only way I like to ride.

[@cyrushertech]

Sorry to hear that. If you would like to peddle without PAS, you can always unplug the Cadence sensor down by the crank arm to effectively turn off the peddle assist feature, while still keeping the throttle assist active. If you have any questions about this, you can always reach out to us via the Cyrusher website as well

[@richardmunn3571]

@@cyrushertech I’m talking to your tech team at the moment. The only option is to drill a hole near the computer and put a switch in to toggle the PAS connection on and off.What no one will tell me is why this option is disabled? There’s no logic to it.

[@quietwon8992]

Dam no one really knows what settings do? Or how to set it correctly to your battery

[@seandavenport504]

This kid is horrible at explanation. I think this, I believe that. Due your work and articulate on what the changes do. How do the changes affect the battery and controller ? cmon this generation it DOOMED