Improve your Ebike In 10 Minutes. Programming your SW-900 onboard computer

[@stevieboy4302]

Thank you, straight to point. Cheers

[@brackcycle9056]

Great Video, to see the range of controls I would get , before I buy. Thanks

[@JesusOurKing]

Excellent video major Thanks

[@AugustineEBikes]

Thanks Jay

[@gianfragalli]

Thanks for your very helpful video! Can this display be used with Tongsheng tsdz2 engine? I would like to replace the vlcd5 that I am currently using. Thanks again

[@matthewlee6051]

I'm getting an error 010 in the watt space. The cake only gets short Burts of power and then the throttle dies until it slows down. I set the speed limit to 40 so I know its not that. Any idea on a fix?

[@bingosunnoon9341]

I was hoping for technical information. Do you know of any YT videos that supply that? Thanks.

[@devilhog100]

If I change p14 to anything but 19, it shuts down and flashes E 21. Any ideas? It's the current controller.

[@erezdean]

I need help 😣. Specs are: mxus 3000 motor, 60v (67.9) 20Ah battery, 2000w 60ah controller. Sw900 display. In the sw900 i can set battery 36/48/60v.... At first connection i got error 007, the learning is working but no throttle. I dont know what to do. Please help me out... Thank you!

[@wokbok43]

Are you able to dumb down the power in PA2 ( peddle Assist 2) mode ? Like take the power down like 20 %. PA2 on my motor is way to powerful. Can we do this ?

[@ramirolucero1]

How can I make the horn to work in my electric bike

[@alksy342]

In p7 I have a 36v bike What should mine be set at

[@TheSonicFan4]

Why does the video cut out at 15? There's 16.

[@jammydodger5253]

Violamart?

[@romanriha6292]

hi how do i set more than 20A? do I want 40A or does it only apply to PAS?

[@HitchHikersBlues]

Any views on the Cyrusher XF800 1000W 48V-13amh Fat Tire Mountain bike with th SW900 display

[@adandridsr]

The SW900 controller watt read out has only 3 digits therefore will only read 999 watts and not suitable for e-bikes with higher wattage ratings. I have 1200 watt bike my SW900 reads fine until give it full throttle then reads 200 watts. I hope this won't hurt the SW900. Any comments would be appreciated.

[@MaxM979]

Hello my Speed limit isnt working any ideas ?

[@adandridsr]

What is the max wattage the SW 900 can read and display?

[@radualexa3149]

Can u please help me? I have the S900 display, not the SW900 that is shown here. At 08 (speed setting), i can only choose between 0 and 1... My motor is a bafang rear hub with a 48v 14.5 mAh battery and it's limited at 25 km/h. I have no controller, only the display. Cool video!

[@Muggel65]

How can you reset the daytrip on that display to zero again?

[@AugustineEBikes]

Very simple. Turn on the display and then press the up and down arrows until your display is blinking. When that happens press the middle button and you will see that all of that data is reset. I know it's hard to get used to but at the end of every ride do a reset so you don't have to think about it the next time you ride.

[@guttasnipe4702]

My screen keeps saying……..Info 1…..what does this mean.

[@TheHappyDIYGuy-ri8nb]

you are talking to close to the mic sounds distorted.

[@thehopechannel1987]

Hello, can you tell me haw to fix error 10 on sw900

[@RallyandTrail]

Hi,Can you run 52v battery's with this LCD? thanks

[@AugustineEBikes]

Technically you can, however it is really designed for 24, 36 and 48v. Most 48v controllers can handle a 52v battery, but in the world of ebikes I would get a controller and LCD that is designed for 52v. You'll also get more out of the battery.

[@RallyandTrail]

AUGUSTINE EBIKE STORE 2018 Thanks for replying 👍🏻. I'll take your advice and stick too 48v and maybe upgrade next year .

[@jakewatts9489]

Hi can you recommend a good controller for a 48v 2000w and my max speed is 32mph any ideas om hiw to improve my top speed

[@domenicopipieri492]

Ciao ho un display sw900 sotto la mia bike però dopo 3 giorni di vita ora non mi da nessun segnale di vita qualcuno mi può aiutare?

[@truhunk1]

You say to keep an eye on our wattage to not over extend the bike. What does that mean ? What type of numbers should we see or look for ? What do the numbers mean or indicate ?

[@Hot_Topic]

I need to find out why mine only pulls 290 watts max on steep hills with a 750/1000 watt motor no pedaling. Mine seems under powered I own an 800 watt and 1000 watt front wheel drive and my new 1000 watt kit with this controller shows only 290.

[@umar60677]

How do I reset the controller?

[@bernardroussety2869]

Hi I have just installed a 2000 watt 48 volt rear hub motor With a triangle battery pack 48 volts 35 ah Went for trial run works great However only doing 36 K per hour What should I expect ? Anything I should have done !

[@MKA874]

i have the same broblem

[@MegaNayton]

Should be more than that mines a 1000w and i get 46km per hour it did how ever kill my batterys and i was only able to get about 8 or 9 miles on batteries i should of been getting about 20 miles plus

[@MrWos1]

Mine has 2 blue wires that when connected together limits my motor to 750W, which if yours is the same would limit you to about 35km. When they are not my 1000W will do 56.5 on a full battery. Yours should be +60km all the time. If you have a LCD/LED display check setting 8 to make sure it is say 100 and not in the 30 range.

[@carlosh1496]

Bernard Roussety hh

[@EdgarSpann-r9h]

I have a ? About my sw900

[@jasaspaklonavicius480]

O have error 8 what that means someone please help !!! :(

[@pabloricardodetarragon2649]

www.gonowelectricbicycles.co.za/pdfs/SW900_manual.pdf

[@RafaelSilva-if4yu]

I have error 22 how take out

[@AugustineEBikes]

On the Sw-900 the error codes stop at 13. So I'm not sure what you are seeing. Sorry!

[@truhunk1]

Why doesn't this computer display show the battery voltage ?

[@maxpower001]

That's what I wanna know.. I had that function on my 1st bike I built and I found that very useful.. I don't think this setup has it.. but this is still day 1.. I'm figuring it out😎

[@ABCD-yu5ii]

m button and up pressed together 3 times

[@stephanestephane1445]

Error 6 sur mon compteur , et je sais pas c'est quoi 😔

[@AugustineEBikes]

vous n'avez pas choisi la tension correcte de votre batterie

[@MKA874]

how to change the speed limit

[@bernardroussety2869]

Unplug the single wire it’s either blue or black It doesn’t need to be attached Let me know if it works

[@maratkurbanov6748]

8