How to Adjust Topography / Site to the Building in Revit Tutorial

[@luissantiago7971]

I Have to thank you a trillion times for helping me get through my finals in Architectural college.

[@tommasocoiro8769]

I think the best way to do that is using the comand "Graded Region", so after you could also calculate the quantity of terrain moved.

[@ggenerouscreations9499]

Can you please elaborate more ?

[@lettyserujo4796]

Thank you so much for this video, it's direct and so helpful. You've taught me more than our professor is six weeks. I'm a subscriber to your channel.

[@keziahpetersen6190]

Thank you very much for all you useful videos. 👊

[@joshuawoolley7490]

Thank you so much. I have followed your videos for some time now and I can now make perfect use of the Revit software.

[@rdvizstudio]

Sir thank you so much i really wanted a video on this thank you so much.

[@SaifAli-fo2gv]

Hey Mr. Balkan thanks for such useful videos which gives us a great learning as well as fabulous ideas 🙂

[@arelisaldana4448]

Like always, you have saved my life!

[@duartereino8331]

thank you... great tutorial as always. you rock!!

[@larry6510]

Great video!! regards from Mex.

[@arqpablovazquez]

You're the Best! Thank u! 🙌🏼👌🏼

[@wunnako3312]

thanks you for a video

[@kundisrecto9389]

Wowww!! Amazing... Thank you sir... God Bless U...

[@christossakizlis]

You are good!

[@shishupalsingh5614]

Thank you for nice video. Great Help.

[@jwkerr007]

Hi, I have a video suggestion. Could you do a video where you make a topo solid. This would look like land from above, but be solid for basements, cliffs, and tunnels underneath. Thanks.

[@Zen-oe4kp]

thank u so much

[@allinall233]

You're good...thanks

[@gioxoja]

How to Adjust Imported TopoSurface from autocad which is above the existing levels?

[@vbb2185]

hey i hv a problem...i just want the topography to be viewed in first and second floor level too...how cam u do that?

[@juanfelipemelendezcornejo8798]

Perfect thanks

[@CursedMale0]

Is there any way to place a vertical slop of 90 for say a retaining wall in the middle of the lot? I split the lots but my cut n fill were wrong. Revit has a bug when there are multiple topo solids in the same project. Especially if one suttounds the other.

[@olik136]

how do you shape the outer edges of the topography to match the property line?

[@balkanarchitect]

You use the property line tool for that, no need to shape the topo surface

[@olik136]

@@balkanarchitect thanks for the answer- you can't see that line in 3D though- so I always trim the topography- but then it handles very poorly after it is cut

[@balkanarchitect]

There is a way of achieving that, I have included that in one of my courses, please check out my course on topography in revit, you can find it on my website. 🙂

[@kirillpopov1373]

in my opinion is better to copy one topo in The phase Existing other in The New phase, after it you can modify new terrain and calculate the volume of extracted earth masses )

[@abiblabla]

I would love to see a video on that! Including calculations!

[@balkanarchitect]

Hi, I show all of that in my topography in revit course 🙂

[@danielcalibuso3951]

Great video. I didn’t know that you could place topo points above building pads like that! How would you go about placing topo points around a retaining wall where the difference in elevation is +2m?

[@duartnadia]

Hi! :) How could we see the difference between the existing and new phase in the topography? How much soil was moved? (Thank you)

[@kiransebi6399]

(welcome)

[@subho7540]

Kindly make a video how we create G.L to P.L with detailed materials (like sand filling , B.F.S , P.C.C, floor Tiles ) including quantity calculation. Plz ❤

[@fatmafaizal07]

what can i do if i have an already modelled contour site as well as a building on another file. how can i get them both together? how do i place the building from one file on to of the contour?

[@manik9405]

Revit to rhino video .pls upload it..

[@AussieBIMGuru]

Try out rhino inside. I made a video on selective baking to rhino here; kzbin.info/www/bejne/ap6Vgmxmas5-Y6c

[@saljyothkrishna5854]

THE POINTS ARE NOT DETECTED WHILE CLICKING ON IT.NOTHING HAPPENED WHEN I CLICK ALIGN.PLEASE SUGGEST ME A SOLUTION.

[@vishnu.r8822]

I want more videos about vray in revit

[@gpm4166]

Duuuuude, I am doing this right now! Topo surface is a bitch!

[@ameenlams1636]

How to create an arc wall with revit

[@janneywar8518]

4:32

[@janneywar8518]

6:00

[@czr7j9]

i thought you would need to do a cut and fill

[@bnmporvida6138]

DO ONE FROM 3D FACES TO TOPO REVIT, CLIENTS ARE SENDING IN MODELS THAT HAVE TOPO AS A MESH IN AN EXPORTED CAD FILE FROM 3RD PARTY SOFTWARES...IE ARCHICAD

[@arshadhussain7358]

This technique is not working in revit 2016......help!!!! help!!!! help!!!!

[@phophitshilongo9247]

👌

[@haoss5ice]

Gde si bio pre dva dana kad sam dušu ostavljao sređivajući teren. XD XD XD P.S. predlog za video "Kako napraviti parterno rešenje kad imaš više objekata na denivelisanom terenu" i drugo kako extractovati sheet-ove iz linkovanih file-ova.

[@balkanarchitect]

Dobar predlog!

[@_musinguzi_]

THE ADS!!!

[@maarizz8084]

Ain't no engineer got time for listen this long. Make alternative shorter videos which summarises just what we need. Thank you.

[@morfairy]

Thank you :)