How to Air Bag your truck for $100 (Air Bag Suspension) Awesome Upgrade

[@Glennfix]

UPDATE: I did change the bottom strap (under the spring) that holds the bottom plate on to 1/4 steel. For those that don't believe this works, I have tow heavy loads (10,000 or more) more then 12 times with no problems. If you would like to see a before and after photo with "About" 15,000 pounds (I know how my trailer sits with that much weight) look here www.how2fixvideos.com/Dodge_page_3_videos.html

[@Z71Ranger]

LOL the first picture with the cooler unit has all the weight to the front of the trailer... The second picture is fire wood is all stacked even the length of the trailer... That NOT a very fair showing of the before and after is it now... Those air bags are JUNK...

[@rayschrum5855]

Glenn 350

[@miguelmartinez7001]

Z71Ranger get outta here you dock and work on being a likeable person

[@blainecelestaine4543]

you probably no this by now but you can get 90 degree push fittings from 18 wheeler parts house for the top of the bag

[@brucemcgeehan2847]

Please dont copy this crap job

[@sergzamor1268]

Man i read these comments of people criticizing him i for one think he did a great job he showed how to do on your own cheap way and looks like it works as is to have an air bag set up. Great job man screw all these haters its not like they can show a how to install a air bag on your own. Thumbs up 👍

[@kathleenkatefraser1765]

Other than the fact this isn't a $100 dollar build it's still a helpful video. Thx for making it.

[@Drew_379]

Definitely more than $100

[@zachsheffee8458]

@@Drew_379 These things usually run $300 to $500! So barely over $100 is pretty good!!

[@jesusflores7814]

I really appreciate people like you CREATIVE that give people like me ideas of how to do projects like this! I’m a trailer repair mechanic and certified welder and you did a great job on your truck! I’ll do air bags on my f350 super duty pretty soon I may make a video too but hey keep up the good work thumbs up!!

[@johnbrady6756]

Hi, Like minded , great to see a man making instead of buying at OVER the top prices what you have made works who sees it to be pretty great work. 👌

[@jwill9877]

Nice work but I disagree that it's a good time for someone who has never welded before to take a shot at it. Not something that goes down the highway.

[@Glennfix]

You are right I should have said " good time to learn but not to put to use till after you learn".

[@bakadeshi_aunstudios]

Yup I was going to say the same thing. I'm self taught mostly myself ( my dad also taught me some at first) but I wouldn't trust my first attempts at welding down the highway either :p.

[@paulleslie5855]

Weld like horrible

[@TheBlkac1]

@@Glennfix I understood what you actually meant to say.... What he was saying y'all....Lol That if someone had ever thought about welding, that would be a good time to try and learn the trade!

[@noonespecific9463]

Depends on what exactly it is and what part exactly your welding, in this case adding those triangle pieces was overkill, the 1/4 plate won’t flex , I know, I used 3/16 plating to make mine. So it is one of the best times to do it yourself when your welding on something that just for piece of mind and not really needed. It’s all bolted on, it’s not falling off the truck. At worst the triangle support pieces would fall off, but I’m pretty sure if anyone did that poor of a job they could see it wasn’t going to work. I know the top flange has to stick out so far it looks like it might be weak, but the top of those air springs are flat on top and you they basically stiffen the plate once they are bolted on tight.

[@codysett1]

Now all you need is air shocks and regular coils and you'll have every type of suspension available.

[@kvn1011]

codysett1 🤣🤣🤣💪🏾

[@charliegoodman8626]

You Don't Run Air-Shocks With Air-Bags, You Use A Regular Damn Shock. Some People's Kids FUCK.

[@stay_free]

@@charliegoodman8626 your ability to read and comprehend isn’t very good. Maybe a kindergarten to 1st grade level.

[@charliegoodman8626]

@@stay_free Yet I've Put Air Bags On Everything I've Ever Drove!!!

[@riotautorepair9662]

I plan on doing this + sway bar / torsion bar system in replacement of my leaf spring suspension on my new yorker. Don't want to screw around with rusty brackets and all trying to replace the leaves. This video helps a lot in my figuring this stuff out, thanks!

[@Glennfix]

Glad it helped

[@OBSRida]

Even the best welder had to start somewhere. What's important is you trying. Most people will not try but run their mouth and judge other people that try. Keep up the good work bro.

[@TheLexiconDevils]

Not on critical car suspension components ...

[@OBSRida]

@@TheLexiconDevils What a dick

[@JasonTheMunicipalMechanic]

With air lines there are small sleeves that go inside the line to back up the ferrell for those type of compression fittings without the sleeve or nipple built into the fitting

[@leeizaak3167]

Nice work man!fuck the haters!

[@peterrudy9207]

You could periodically spray them with 303 Protectant . Used to resist plastics and rubber from cracking and drying out .

[@dariomendoza1518]

Wow prettjy good video everyone contributing to Make it Better !!! of Course. including the Creator of this Video!! Im working on a1997 Astro Van .Thanks for sharing!!

[@johnburakowski61]

Nice job designing and fabricating . I've seen 3 vehicles , over the last 7 years with the same system that ended up with twisted frame rails and broken cross members . You can't take the weight off the springs and transfer it to the top of the frame rails without bending them . That's why Timbrens are designed to mount directly under the frame rail. Two more leaves on each side , of .499 steal will carry the load and won't damage the frame . Sorry , I don't mean to sound like " That Guy". Especially after the sweet job you did mounting it .

[@shanesmaineshop]

I have a set on my ram 3500 and love them.

[@WaltDizal]

Good install. It would be nice to see a demonstration of how they work on the truck.

[@jasonvala9239]

Can cut the spring about 3" after the axle toward the rear to go to full air ride, would not use the shackle end at all. If load isn't your concern but ride is. Basically the front half of the leaf spring would act as a stabilizer torque arm. Just another option. Nice video

[@fastredcar97]

He would need a pan hard bar installed if he did that. The front hangers can't handle the lateral forces by themselves.

[@jasonvala9239]

@@fastredcar97 got it Matt. But it got that lateral force before. Not much keeping the lateral force on the shackle end that swivels when it was there originally. But sure. It wouldn’t hurt to run a transverse torque arm from axle to frame. That would be easiest. A Hutch trailer torque arm only cost about 40.00. Takes 1” bolts. A simple mounting fabrication would need to be added. Thanks fir responding

[@fastredcar97]

@@jasonvala9239 as many performance trucks that get serious run a panhard as well as their leafs as the rear sways laterally quite a bit.

[@tylerstewart6011]

Have you made a follow up video of the install? Like to see how the kits holding up or if you've had any issues.

[@jameshodge3182]

Windex works well for leak detection. Wife probally already has some under the kitchen sink

[@northcarolina6240]

Fresh Air: this product is known to the State of California to cause cancer, birth effects , or other reproductive harm. Water: hold my Deer Park

[@billbrown5853]

Everything can cause cancer in California.

[@mikeirish7073]

Exactly why I don't live in California. 😆🤷‍♂️😆

[@noonespecific9463]

I know the video is older. Maybe you will still see the comment. First , those bags you used are almost identical to the loadlifter 5000 bags , except they are good for at least 5000 lbs each. That is an air spring for a drop axle on a commercial vehicle most likely. They look very similar to the ones I used, and that’s what they were meant for. I mentioned that part just in case you didn’t know. I don’t know if the loadlifter bags are single or two ply, but the ones you have should be 2 ply, if you clean them up and spray a little of your favorite rubber protectant on them every now and then they will last a really long time. Second, if you do still notice the comments here, I see you installed your in a plum fashion, like straight up and down instead of with an angle like the shocks have. When you showed them right when you had them attached you could see how the bag was extended more on the bag side than on the front. This situation causes me slight concern on my installation, I did pretty much what you did almost exactly really, but I have only installed and tested them. They are on a pickup truck I’m redoing and they are one of the last things I needed to do before starting to use the truck as my everyday vehicle. I’m wondering if putting a slight lean in them sort of like the shocks are , but not that extreme, just enough to take out that condition where the back is slightly more extended would be better. I hate to tear it all back down and change it if I don’t need to. Possibly you will be able to tell me how yours held up installed like that? If you can comment on that it would be much appreciated. Awesome job by the way, it’s amazing we both came up with about the exact same design for installing those air springs. Maybe there isn’t many install options on them , I’m not really sure.

[@Glennfix]

I have been very happy with them. They work great. I only had to replace one of them, and that was my fault. I had an inside tire go flat, and it rubbed on it. I made a review video if you would like to see it ( kzbin.info/www/bejne/mGTcY4SHqpecpaM ). I also added an onboard air compressor. I like the fact that I can go someplace with no load, and when I need it, I can add more air. I made a video of the air compressor if you would like to see kzbin.info/www/bejne/sJC6qXaLi6aqic0 .

[@noonespecific9463]

@@Glennfix thank you, I will check out the other videos you linked, I was thinking about a compressor, I went way way way over budget already though, covid insanity just added to the cost. I’m interested to see what you did for a compressor especially. It makes sense to be able to make your own air, those analog type control set ups are pretty cheap, then I could adjust from the cab. First I need air though. Thank you again for the reply. You have been most helpful!

[@consaka1]

Something to think about. I have air bags on my van for heavy loads and run 1/2 ton springs for comfort. Thus I like to change the pressure in my bags all the time. So I have an on board air compressor. I have the air bags plumbed in to valves and a pressure regulator with a gauge for each side. If the load is uneven I run higher pressure in that side. The gauges tell me the pressure in each bag and the valves isolate the bags from the compressor side since any system leaks seem to show up from that side. Works pretty good. I have all that mounted to the side of the seat. I open the door to get in and can instantly see the pressures in both bags. I can also alter them in just a few seconds. Turn the knob on the pressure regulator to set the new pressure. Just that easy. Of course I also use the air for airing up tires after a run on the beach or off road trail.

[@shawnt8891]

consaka1 to

[@consaka1]

Shawn T ?

[@technicalitems731]

Sweet! Is it a 1 ton van using 1/2 ton springs? Would like to see a video of it! Can you make one and post it here?

[@consaka1]

@@technicalitems731 Actually it is classed a heavy half ton. It had a half ton rear axle that was really weak with my new diesel engine. So I found a full float 14 bolt from a one ton van and haven't had a problem since. As for videos, I don't really have talent there.

[@kiddgrower9860]

Thanks for adding your lil bit about prop 65 in California being bs

[@99shadows66]

These days you can buy airbag kits on eBay, Walmart, or Amazon for $160 or less. I am going to put a kit in my F150 and the price was $134 plus tax. I even got a compressor kit with gauge for another $130 plus tax so for about $280 total I have a complete airbag system. I will update after some time to let everyone know how it's holding up.

[@Glennfix]

You will be happy with it.

[@kristopherhasenbuhler5393]

I like it. My welding is getting alot better. I am also self-taught as you stated around 2:20 but I have had a few good welders give me tips. I like this mod and I hope I can find a good set of bags like these.

[@Glennfix]

If you like you can take a look at my video (Air-Bag Review) this is after they have been on my truck for over 2 years at, kzbin.info/www/bejne/mGTcY4SHqpecpaM

[@jcody_parker]

Definitely would bolt into the side of the top bracket / frame also. It will eventually twist out. Is the bottom of the bag even sitting all the way on the lower mount and bolted to it? Weld a piece of metal on the bottom of it in between the 2 leaf spring u-bolts as a spacer so it doesn't bow in either. Keep practicing man, it's fun to make your own stuff!

[@ChipLohman]

My experience with an F-150 and a fifth wheel is that airbags solve SERIOUS bounce... not payload.

[@BriggsStratton11]

Glenn, would you have a link or name for me to find a pair of these air bags? Thanks.

[@Glennfix]

The main website is https;//airbagit.com the same place sells on eBay under the name chassis_tech. Sometimes there stuff is cheaper on eBay. Some eBay links are www.ebay.com/itm/V-Air-Lift-2600-II-2-Air-Bags-Single-Port-3-8-Airhose-Springs-Suspension-FITs/282280749134 these are 2" taller and cost about $130. If you click on the eBay link you can go to their eBay store from the link. The "2600" is the weight capacity.

[@BriggsStratton11]

@@Glennfix Thank you! I appreciate it

[@boseal7633]

Nice video 1 question did you run air stem for each bag or 1 air stem an tee to each bag

[@Glennfix]

They are tee together, it has worked fine for me that way.

[@ThisTall]

You have a spring coil over, leaf spring and an air bag in there now.

[@freethebikes]

Can you post a link to the airbags that you bought?

[@johnle231]

Just video I’m looking for. Bought used rv for motor and it has airbag system on it. Air lines are cut and there’s no compressor but rest is there I think .

[@Glennfix]

Glad it helped

[@bobvedder2451]

Do you use "plumbers putty" or teflon tape on the threads of the fittings? It will help prevent leaks.

[@Glennfix]

I used teflon tape

[@coreyrides9650]

9:18 you don't need to waste money on leak detectors just fill a bucket or spray bottle with water and some dish soap and spray it works the same

[@Glennfix]

I do commercial refrigeration so I always have a bottle on my truck.

[@victorgalindo6201]

Where did you find the airbags that cheap because I can't find any around here

[@Glennfix]

The main website is https;//airbagit.com the same place sells on eBay under the name chassis_tech. Sometimes there stuff is cheaper on eBay. Some eBay links are www.ebay.com/itm/V-Air-Lift-2600-II-2-Air-Bags-Single-Port-3-8-Airhose-Springs-Suspension-FITs/282280749134 these are 2" taller and cost about $130. If you click on the eBay link you can go to their eBay store from the link. The "2600" is the weight capacity.

[@victorgalindo6201]

Thank you Mr. Glenn

[@chrisavila2073]

What is the name of the company you bought the air bags from and all the brackets

[@Glennfix]

airbagit.com

[@silvestresantana1170]

We’re did u get the bags I want to do this to my Colorado

[@Glennfix]

airbagit.com

[@chadjones99]

lots of haters , wow . anyway it looks fine to me , good job . after you load it up a few times and test them out real good I would recheck everything.

[@Glennfix]

I towed around 10,000 3 times with it work fine for me. A lot more stable ride with a lot less sway.

[@kevinbaker8102]

I did a bag setup on a 70 ranchero for when I haul stuff

[@desmondgriffin3924]

Does this help rough rides !

[@Glennfix]

It depends, If the rough ride is because the truck is sitting too low, yes. If you want a ride like the air ride on a BMW no. But you can adjust the air and make the ride firmer or softer.

[@ronbonick4265]

did you link the airbags together? and install a relief valve? I wonder if they put something in the airbags to suck up moisture?

[@Glennfix]

I did not link the air bags together. The reason is sometimes I carry uneven loads so I wanted to be able to add different pressures in them. I have not tried them teed together be I have herd that when you go around corners the air will move from one bag to the other.

[@kevinduprey9326]

can you use air bags to lift a truck for higher stance alone (empty bed)or is made to lift with a load pressure only by lifting a loaded bed back to stock height.. sorry for dumb question ...

[@Glennfix]

You can but if you put a lot of air (higher lift) in it it will give you a hard ride.

[@atxhellcat2170]

Where did you get/buy the airbags from??!

[@Glennfix]

https:airbagit.com you can also find them on ebay.

[@atxhellcat2170]

@@Glennfix Thank you!!!

[@donpowers2572]

I did this about 6-7 years ago found a used kit firestone used $65 at a swap meet....I used heavy aluminum angel it on from a computer rack tower.... the feet were 3/8th or 1/2 inch.....welded a bracket to the top of the ubolt to hold the bottom....your air bags look wider (diameter) and this is on a Dakota.......first a 94.....now a 2000....finally got them hooked up ot a air pump and controls in cab.....people are surprised how well they work........but the one thing I would recommend it to keep the have separate ......for one thing.....in the lean corning the outside bag is compressed thus transferring the extra pressure thus pushing up the opposite side.... next time you go to weld try vertical down and just move left and right you will be surprised.....horizontal (flat) is a little tricky....me too self taught... key word in wire welding is bacon frying sound.... have a good one enjoyed your video....will subb...and travel

[@bobtaylor5196]

Don Powers if you are a self taught welder that is fine. If you are running an outer shield wire vertical down is ok, if you are using an inner shield or stick welding go up. You don't want your slag to get in your weld, that will cause porosity ( I may of spelled that wrong ) thus making a weak weld. The outer shield ( gas shield ) won't give you this problem. There are some rods you can run vertical down, but I'm guessing if you are self taught you are just doing some basic welding and that's all good. Look around here on you tube there are a few guys that give very informative videos on all types of welding. The best thing is practice, no better teacher than experience.

[@donpowers2572]

Bob Taylor I chassised a 1969 road runner back in 84 but your tip on vertical up makes perfect sense...I built a 70 x60 what looks like a fat L canopy for I guy and took a direct.hit from a hurricane. I wall ..its 16-18 ft high built trusses out of the "C"s that thin stuff is interesting .... zero damage on the canopy.... but vertical up with welding rods explains a lot when you mentioned the slang...running back into the weld....I like welding always over build...got to make it people proof...I appreciate your comment...thanks Don

[@donpowers2572]

Bob Taylor BOB YOU ARE RIGHT ABOUT UTUBE I WATCH ALL KINDS OF VIDEOS.....LOOKING FORWARD TO GETTING A MINI SPOOL FOR MY LINCOLN WIRE (GAS) 220V LIKE THE 110V I PICKED UP A LOT OF ALUMINUM TUBING A BUNCH OF SQUARE 3X4 BOX 120 WALL MOST 3-4 FT LONG BEEN SAVING STAINLESS ALSO. REPOURPOSING LAW MOWERS .(RIDING) PICKED A JANCY JB2400 BENDER WITH DIES I WANT TO BUILD OFF ROAD BUGGIES... THANKS AGAIN FOR THE REPLY....

[@bobtaylor5196]

Don Powers you can do much more with the 220 machine and do heavier stuff a lot quicker and better. You should like it. Good luck to you

[@donpowers2572]

Bob Taylor thanks Bob that's why I went with the 220v. I picked up a linclon 225 a.c.-dc arc welder...to looking forward for the plasma cutter and some day a tig.......good luck to you too!

[@michaelarnn7977]

where did you get the airbags that cheap im looking for some for my 06 mitsubishi raider for pulling my 26ft yacht

[@BRI33NOR]

Connect the two air bags together with regard to air pipes. Then have the inflation point handy so you can reach it with a simple battery operated air pump. Maintains equal pressure both sides

[@bushratbeachbum]

When you corner, you lose all benefit of having the bags if you connect them together, which if loaded up, could cause a rollover if you're relying on the bags to level the vehicle. Terrible advice.

[@brown029]

Bad idea

[@BRI33NOR]

The installation was done professionally, the two microbore cables were connected to a small bit of apparatus behind the drivers seat, it had one schrader type valve and a gauge to adjust the pressure. I don't know maybe it had one way valves inserted in each line to prevent exchanging values under cornering or load etc. I trusted a professional company to do the instalation correctly. They did every kind of vehicle including very heavy goods and large fire service vehicles with large water tanks etc. It totally transformed the vehicles handling and comfort. Lived full time and travelled much of Europe on every kind of surface with it. Never rolled it once.

[@nickonickster1]

Unless a bag breaks....

[@BRI33NOR]

@@nickonickster1Please note. These were fitted in addition to the standard suspension as from the vehicle.manufacturer. If they had burst, extremely unlikely as most bus and trucks use them, would have just gone back to standard suspension, which whilst being too soft for my liking, did work. They actually replaced the standard rubber bump stops with an adjustable inflatable unit.

[@travisgrimm]

I just got a free pair and ordered a new set of hoses and fittings. When I install them, it'll probably be just like this

[@transdetendal]

@Glenn 3505 , the warning is coused by it being goldchromed and you pic it up through the skin , parker hannefin stoped plating and using them 10 years ago after testing workers blod after 3 years with handling fittings like those , more then 60 times the legal dose of the plating in their blod !

[@Glennfix]

I never knew that, now I know why.

[@CJD44]

Use nylon lock nuts. All the haters on here have no balls, ingenuity or common sense. It’s your truck do whatever you want to it. I personally weld and fabricate. I’ve seen way worse welds hold. Whole different story if you remove leaf springs. In this app your assisting. Holding power of angle iron should be high and low. Not in the center. Great video. GOD BLESS. LIFES A GARDEN... GROW IT!! Lol

[@maryfinchum9741]

i like to know where you got the air bags for a 100

[@Glennfix]

You can get a set of air bags for $68.36 (www.ebay.com/itm/Air-Ride-Suspension-Air-Bags-Pair-Standard-2500-1-2-npt-Kit-Replacement-Parts/281836657351?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649) I payed $79.98 for bags that are 2" taller. I payed $25.00 for the steel. I do deal with the steel shop, so maybe they gave me a good price but they just picked up scrap and cut and bent for me. I did all the final cutting and all the welding myself.

[@maryfinchum9741]

thanks Glenn, nice job we looked for bags but never found them for that price

[@nickonickster1]

@@Glennfix those bags are 130 now

[@Glennfix]

​@@nickonickster1 Your right. I have not looked at them for a long time. The ones I used were the V Air Lift 2600-II, on eBay at $126 www.ebay.com/itm/V-Air-Lift-2600-II-2-Air-Bags-Single-Port-3-8-Airhose-Springs-Suspension-FITs/262749710096. They have the two standard 2600 airbags that are the same weight capacity just 2" shorter for $89 on eBay www.ebay.com/itm/two-new-standard-2600-air-bags-3-8-npt-port-ride-springs-bag-suspension-fbss/121566282478. Since then I added an air compressor (if you would like to see the video kzbin.info/www/bejne/sJC6qXaLi6aqic0) and I can tell you I am very happy I added them to my truck. They are worth the money. Also, I have a 2year review video.

[@sultanhdnow]

What is the best setting for airbag suspension longevity ? I heard Hight high setting is gonna make it last longer ? Is that true ?

[@Glennfix]

I don'y think the pressure has any thing to do with how long they last. You never want to drive with them empty. The more weight the more pressure is needed to make the truck ride right. If you don't have a lot of weight and put a lot of pressure in them you will get a very hard ride. The idea is to adjust the pressure so the truck rides good with the amount of weight in it.

[@angelC916]

If you install airbags do you need to remove the shocks?

[@Glennfix]

No, You need to keep the shocks on.

[@HOMEGA10]

hello I plan to install this system on my cherokee, to pull heavy loads without losing ground clearance. can you tell me if you are satisfied with it in the long run, and if with the recoil you would have installed it differently. sorry if you explained it in the video but I don't speak english, I use a translator. cordially.

[@Glennfix]

I am very happy with them. They have been on my truck for over 2 years. I just added a compressor so I can adjust the air any time. You can see the video at kzbin.info/www/bejne/sJC6qXaLi6aqic0 If I put a lot of air with no weight It will be a hard ride. If you get the air right it will give a real smooth ride.

[@HOMEGA10]

@@Glennfix thanks for the quick response, (the compressor installation is nice and the pressure management system is very clever), so I will do the same installation on my cherokee. thank you and hello from France...

[@BrianW2979]

I would add a few bolts to the upper bag mount through the side of the frame

[@dodge5522]

Brian W sweet I appreciate it if you ever need parts ect just let me know

[@taylorjkinggg]

i was looking at that... thats fucked the way the bag would push it up and away from the frame bolt that thing up

[@oscarespique7857]

Bria n W

[@Livemusic1800]

Help !!!! I have a 1990 chevy obs it has air ride system however I want to remove them and switch it back to stock suspension. What will I need ?

[@zackthomas5707]

Your truck a 3/4 ton? I have a 1/2 ton chevy I'm trying to bag front and back without spending a grand or more. What pressure are you normally running with empty bed and hows the ride quality? My truck came with a 6" lift from the factory and the ride has been harsh from day 1. Never towed alot, just occasional 8' trailer with a four wheeler or fridge. Now its spongy due to worn out components that I'm getting ready to replace and hopefully upgrade throughout this process.

[@Glennfix]

If I run 30-40 pounds in the bags it gives me a soft ride, just firmer. If I have a lot of weight I can get the same ride with more pressure.

[@markodnivel]

Nice coupling flute you made dude, I bet you don't have dirt roads

[@أشتركوافيقناتيوأشتركفيقنوا-ض4ف]

Which is more comfortable and shock-absorbing, air Shock absorbs or gas Shock absorbs

[@Glennfix]

Air because you can adjust the pressure.

[@iam_cal3b642]

hey guy i have a question if i put this on a mini truck thats already low would it level or or make it higher and when i take air out will it slam it?

[@Glennfix]

You can adjust the air pressure to make it higher or lower.

[@codyhitchcock3443]

in the diesle industry we use a spray bottle with dawn and water lol

[@Glennfix]

This works but, I worked on cars when I got out of school for 5 - 6 years. Then the way life took me I ended up doing refrigeration ( have been for 25 + years ) I challenge you to buy a good quality leak detector solution and use side by side. If you have a big leak dawn works fine but for small or micro leaks sometimes it will not work so good. They put stuff in it so it will stick. I have used it and don't see anything come back in 20 - 30 minutes and see bubbles.

[@trevormangus7832]

How is the clearance for the tires ?

[@blainederouen9977]

Interesting video, wish I had seen this before buying my Air Lift kit. I could have easily had someone make the iron plates. As far as leak detector spray, make your own concentrated soap and water in a spray bottle. Save you some money. It works the same. It seems like everything used in California causes cancer. I guess I'm staying where I am. LOL LOL

[@johnnycash1612]

Lol, fuck Cali,. Btw I live in cali

[@murdiesel]

Thank you for the video. You did some good work there.

[@Glennfix]

Glad you enjoyed it!

[@alwaysblessed3133]

I really hope you added bolts in the side of your upper mounts before putting any load on them. Plus I would only use grade 8 bolts and u bolts.

[@alwaysblessed3133]

Jim bo just trying to help. Air bags have a lot of pressure on them under a load.

[@coreyrowe5039]

I bought an airbag system for my old 79 Ford from a truck supplies diesel shop it was only $200 came with all the proper brackets and firestone bags with the all the fittings, lot less hassle I don't think you saved a penny when it's all said and done. Yes I'm a penny squeezer to, but sometimes your much better off just buying the right stuff

[@Johnwick-ul4td]

Where you bought from link

[@coreyrowe5039]

@Johnwick-ul4td from truck pro at enid okla. Just bags and fittings and brackets cost more than 200 now. Bought that kit several years ago still no problems

[@TheSoloAsylum]

If you ever need to put 90psi in air bags...you need a bigger truck. You understand they are to share the weight with the springs, not carry it all yes?

[@kristopherhasenbuhler5393]

What he did more than likely worked for him. Many farmers are just getting by and many junkyard owners will sell them anything that they break much cheaper than they can buy a bigger truck for.

[@hail.khaled]

Hi - Does the balloon (air) give the car its softness and its color, otherwise only to raise the car - thanks

[@johnle231]

Yes. The balloon does give a car its color

[@tonyturner779]

Do a video on the coil over springs and where you got them

[@Glennfix]

You can find them all over the internet, juts Google (coil over shocks) The truth is I was not that impressed with them. I put them on before the air bags and they did not help much. They did not hold or lift my truck, that I could notice. I was getting ready to take them off the rubber bushing are bad.

[@faustinogarcia5202]

I can't see to find these. Do you know the model # on them or name etc. Thanks . Btw- nice vid 👌

[@Glennfix]

The V Air Lift 2600-II 2 Air Bags Single Port 3/8" Airhose Springs Suspension FITs are 2" taller, www.ebay.com/itm/V-Air-Lift-2600-II-2-Air-Bags-Single-Port-3-8-Airhose-Springs-Suspension-FITs/282280749134 the standard ones are V Air Ride Suspension Air Bags Pair Standard 2500 1/2"npt www.ebay.com/itm/V-Air-Ride-Suspension-Air-Bags-Pair-Standard-2500-1-2-npt-Replacement-Parts/281836657351 The 2500 or 2600 is the weight capacity for each bag.

[@thelightworshipper9687]

Interested in these air bags. $100 for both or each? Do you have a brand name? Model/part number? Thanks.

[@Glennfix]

You can get both for under $100. I bought them from airbageit.com

[@RYDENROAM72]

you can also use soapy water

[@LATINFLACO]

Where you bought the air bags?

[@Glennfix]

airbagit.com

[@terranovnicek1567]

Should've just drilled a few holes on the bottom plate for the axle u bolts. Pushing down on the u bolts is just kinda hacky

[@k.r.v.4219]

That was informative with a good job done. Now all you need to do is get rid of the coil-over overload shocks and get some really good adjustable quality aftermarket shocks. I suggest a Rancho 9000 adjustable. Or a Bilstein designed for the weights involved.

[@johnle231]

@k. R. V. What’s wrong with the coil overs?

[@BC5391]

If you had bought the brackets, the bolt where the rubber stops are, the stops come off, the air bag brackets go on.

[@JeepITguy]

This wouldn't be bad if you installed some gussets above the bracket. Also, turn the heat up on your welder, you're not getting enough penetration.

[@JeepITguy]

I stand corrected. After checking out the angle iron above it and the trailer hitch you have spanning across the frame, you have PLENTY of reinforcement. Good job! But buy some drill bits, and turn the amps up on that welder! ;)

[@peterpaterson5371]

did you have to fit air compressor to fill the bags????

[@Glennfix]

I don't have a air compressor now but I like them and am working on putting a on board compressor and front air bags. I am getting everything together now. This way I can adjust the pressure from in side my truck instead of finding air supply.

[@ALGORITHMIC_EXILE]

HEY THAT WAS COOOOL.... IMA SHOW THIS VIDEO TO MY BUDDY WHO JUST PAID A SHOP 1500 BUX TO DO THIS.... HAHAHA.... Only question i have is where did you generate the air from?

[@Glennfix]

Thanks, Now I just add air with a home air compressor. I have everything to add a on board air compressor, just haven't had the time to do it. when I do I will make another video.

[@Glennfix]

Thanks, Now I just add air with a home air compressor. I have everything to add a on board air compressor, just haven't had the time to do it. when I do I will make another video.

[@Cake41579]

The big bad wolf. He huffed...and he puffed...and he blew air in these air bags. But the big bad wolf has been a smoker for quite some time now so his abilities are limited nowadays. Life's been tough for the big bad wolf. Poor Lil feller.

[@zulumagoo1]

or, you could put soapy water in an old spray bottle and not go waste money on a "leak detection solution". it ain't Freon.

[@bakadeshi_aunstudios]

Found the old school mechanic. Old soapy water trick works on just about any kind of air/gas leak.

[@beaubraxton2235]

❤❤ that’s awesome

[@gamecapturemoments1]

Id like to know where you got air bags for only $100 because I haven't been able to find them for under $300.

[@Glennfix]

I got them from airbagit.com, But I bought them off ebay the same company sells on ebay under a different name a lot of the time chaper. There web site is www.ebay.com/itm/Air-Ride-Suspension-Pair-Standard-2500lb-Air-Bags-1-2-npt-Single-Port-Heavy-Duty/262808911098?hash=item3d30a1bcfa:g:1AEAAOSwopRYe5AM ($81.73). I have hade them on my truck for over 2 years now and made a review video if you would like to see. kzbin.info/www/bejne/mGTcY4SHqpecpaM

[@purestress2597]

I'd rather put the nuts up top because the top side of the plate is less often the side under tension what with the air spring on top

[@oby-1607]

Your welds are ok. The more practice you do in your welding the better you get. Even self taught. Practice is like sharpening a knife, the more you do it, the sharper it gets.

[@jwill9877]

That's true but anyone who Welds should get a crash course on what constitutes a good weld and why some are stronger than others. Also how uphill, down hill effect penetration. Just the basic concepts and it will make newbie good enough to run a strong weld

[@ferrofil]

Engineering level daycare! The load on the bracket will twist it up and outward from the frame, needs to be bolted thru side of frame. The clamping around leaf spring package is joke, you need something between springs and plate to clamp against!

[@homertalk]

I'm no engineer, but since he didn't modify the frame should;t that carry any weird twists or loads on the original suspension, while the airbags just smooth things out?

[@dougking8424]

Shouldn't be too big of a deal. First we have leaf springs, then there's the coilover shocks, and then if that's not stiff enough.... gonna throw some airbags on so it's like driving with zero suspension. Lol all kidding aside though. It is kind of a cool very cheap way of doing it. Although not quite done correctly.

[@dumpstergaming310]

How about you learn how to speak correctly before you try and critique someone else's work.

[@tunafishjoe]

What bolts are those? Like M16? So 50kN tension capacity? That's like 5 tons of force each so 10 tons combined. Plus the same on the other side of the truck. 40 tons of strength seems MORE than enough!

[@BrianW2979]

Seems like people don’t understand leverage

[@victorgalindo6201]

Ok thanks Glenn

[@dillonscott631]

You sound like Dr. Phil

[@re9947]

Dillon Scott It is Dr. Phil how did you know ?

[@paulshamblin6260]

Phil likes to mod his truck too. He is analyzing these comments.

[@garoxasmoking4690]

Dr. Jhony sins

[@newyorkboss6124]

True

[@rmccarrillo1759]

Hahahaha!!!!

[@bl5355]

What happens if you ride with them empty?

[@Glennfix]

The bag will rub on it self and make a hole.

[@mandomando2104]

Nice! Which welder did you buy to weld these brackets? What was the total cost of the welder and accessories?

[@pbodymathis]

What do you mean that you are not a professional welder? Looks great from my house!!

[@Glennfix]

Thanks

[@wrenclegg553]

I just saw your video. It appears to me your bracket on top of the air bag is braced in the wrong direction. Can I correctly assume you had to weld it to your blue ox bracket for proper support?

[@Glennfix]

No, I bolted it to the blue ox. I made it wide enough so the air bags will never hit. There is not room to mount it any other way. The blue ox bracket sticks out from the frame so it is snug against the blue ox.

[@jbrunson1949]

I can not get any of your links to load, it says not found ,, what gives??????? also tried g-chrome and firefox

[@Glennfix]

What are you looking for?

[@jbrunson1949]

@@Glennfix both the site for air bag, and the updated video

[@lyon406]

It all depends on what your tire load capacity is at the inflation pressure you are using

[@0007nick1]

If you would of put the bracket backwards you don't need extra bars to go from side to side

[@denisguertin8668]

Where do you buy air bags for 100.00 dollars ?

[@Glennfix]

This video is 4 years old so they have gone up in price but you can get the standard set for 99.99 www.ebay.com/itm/121566282478 and the high lift for 164.00 www.ebay.com/itm/282280749134

[@sbond1963]

Is it a stiff ruff ride when inflated?

[@Glennfix]

I would call it a firmer ride, there is a lot less sway when towing heavy loads. You can adjust the pressure to what load is on the truck. If I ride around with say 90 pounds in them and no load it is a stiff ride. I like them and am working on putting a on board compressor and front air bags. I am getting everything together now. This way I can adjust the pressure from in side my truck instead of finding air supply.

[@jamespaveit]

So how did they work?

[@Glennfix]

They work good, I am glad I went with the air bag instead of more springs.

[@rbo350]

where can i buy those air bags

[@Glennfix]

airbagit.com

[@danwells7691]

can you remove the springs and replace with rail arms

[@Glennfix]

They make a kit for this. You can look at www.airbagit.com they have a kit other places have kits too.

[@drx06]

This truck has leaf springs, coil overs and airbags. All the suspensions.

[@dewaynemiguel3349]

Sitting on top the u bolts a bad idea it can cause your u bolts to break.

[@Glennfix]

I have had it this way for close to 200,000 and towed a lot of weight. If it is tight it will not hurt. If it is lose and rubs it could wear in to the U U-bolts.

[@dewaynemiguel3349]

@@Glennfix I've seen u bolts break and the springs turn and cut he tires.