How to Apply an Iron On Transfer to a shirt?

Use a hard surface to apply your iron-on transfer.
First of all, peel off the thin film on which the logo is stuck. Then iron the garment a bit to warm the material.
1/ Position your transfer face down towards you.
2/ Put a sheet of parchment paper (baking paper) or a very thin cotton towel on top.
3/ Set your iron on the "cotton" program (WITHOUT STEAM!) and press the transfer for 10-15 seconds. You can make slight circular movements. If your transfer is larger than the iron or it must be applied on a curved surface, change the position to heat evenly.
4/ Allow to cool before gently removing the plastic film. If you notice that the transfer is not glued, repeat by pressing again.
5/ Once the plastic film is removed, heat again for about 10 seconds (don't forget to protect it with baking paper or a cotton towel!).
You can wash your customized garment inside out, preferably not before 24 hours.
"Turbo" special nylon vynil.
The finish is the exact same: soft, matte, and full of stretch! The differences? Turbo is a fast press Heat Transfer Vinyl making it easy to use on materials that are easily burnable such as nylon and spandex. Turbo is also a low heat and low pressure HTV. Set your iron to 150 degrees (302°F) or lower and iron for only 5-6 seconds to avoid damaging the nylon, using medium pressure.

[@ProjectsCity]

great video

[@LaLakers17]

Ya make it look so eas¥

[@crogamed]

I bought it and never recieved it

[@leonidasrizos3845]

I have ordered some stickers in 10 days and I still have no update. Also you do not reply to emails. What is this scam?

[@mtmitchell34]

Mine arrived today after the same time. Look good to me!

[@user-zz2mm1cy1i]

저는 흰색프린팅티셔츠반팔티에 청바지입고 싶어요😊😂

[@Ivan_vs_West]

see other videos, it's easy !

[@user-zz2mm1cy1i]

@@Ivan_vs_West 네 감사합니다 😊 새해 복 많이받으세요