How to Assemble a 6x6 Rubik’s Cube | Full Tutorial

[@Tingman]

Even though I hope to NEVER have to do this, this video was oddly relaxing to watch! Thanks for making these useful videos.

[@CubeSolveHero]

You should make a video following along these instructions to see if you can actually assemble the 6x6 😎

[@CubeSolveHero]

I need to!

[@peichentsai6538]

I wasn’t expecting you to be here!

[@BlooketPro-fe8rr]

i agree

[@Bomby_2502]

I did it yesterday

[@Kewbix]

This was really helpful, ive never done this before!

[@SlayingSuperNerdX]

maybe you can make a skit with it also Hi Kewbix

[@gdelectro133]

Why so little likes

[@chasethescientistsaturre5009]

Holy crap your 6x6 also pop?!

[@Avidyoshi]

Ikr

[@jianlisola8633]

@@chasethescientistsaturre5009 yes

[@haydenchurch410]

Even though I don't have a 6x6 I'll still watch this because I like your content

[@CubeSolveHero]

You should get one and break it apart!

[@haydenchurch410]

Well I'm not good at big cubes

[@wrcuber5030]

Same

[@haydenchurch410]

Thanks for the heart by the way @Cube Solve Hero

[@gamerlord295]

😂😂😂

[@Peaceful_Zen_Life]

I just had my first pop out on my 6 x 6 and this video saved me! I got the piece back in within about a minute or two.

[@CubeSolveHero]

So glad it helped!

[@BPRBLX367]

@@CubeSolveHerowe are in a new 😅

[@vincenzoforchi5533]

I just had a center pop, and this helped me tremendously: I was able to push it back in without messing up the bracketing. 🙏

[@over50gamer]

I just had an inner piece pop on my Qifan 6x6. You helped me put it back in place. Thank you for making this video!

[@tobedeleted7203]

You deserve a medal. My kid managed to rip it apart, and I was absolutely certain I'd not be able to assemble it... until I watched this video!

[@hperm2022]

This video was good! My 6x6 exploded and now my 6x6 is back in one piece!

[@jeffreyaustin8635]

Appreciate Your Video! Put my cube back together successfully! 👌🏾 👍🏾

[@speedcubingdotorg]

Thank you for this, hopefully I will remember this because I am bound to have to rebuild 6x6x6s again at some point, I have done it but it is always frustrating, I feel this method will make it alot faster. Have you ever tried to see how fast you can reassemble a 6x6x6?

[@CubeSolveHero]

Yup. I made 6x6 force cubes and I can typically build a 6x6 in about 15 minutes

[@speedcubingdotorg]

@@CubeSolveHero wow, I suspect it would be useful to be able to do it that fast!

[@CubeSolveHero]

@@speedcubingdotorg it comes in handy

[@speedcubingdotorg]

@@CubeSolveHero Well I have just had to assemble a new core magnetic 6x6x6, I feel this tutorial may have to be remade for core magnetic 6x6x6s since without tweaking the method quite a bit the core will keep just sticking to one of the corners. We will have to wait and see whether these core magnetic big cubes become a common thing though.

[@jakejat2]

This somehow helped me reassemble my 8x8

[@Floor773]

this also kind of helped me to learn how a 6x6 works, surprised how the person who made it didnt die of brain overheat lol, I think a diy kit for the 6x6 would be pretty cool too. Lets be honest, you deserve a sub and you earned a sub

[@aravindalokam]

Imagine higher cubes of 13x13 or so

[@simgames9133]

i had an internal pop and that helped me a lot. thank you. Also for anyone watching this comment, please NEVER buy the yuxin little magic 6x6. it popped 5 times in 3 solves and one of them was an internal piece. edit: i tightened the cube and added some martian lube with a bit of weight 5 from scs and it feels great

[@StayOnTarget.]

I just came here because my YLM popped lol. It's a shame since their 4x4s and 5x5s are so good.

[@2STR0]

My 6x6 was accidentally destroyed and I had to reassemble all of it. It is a very difficult, strenuous task to rebuild. Eventually, I managed to fix it. Thank you so much for this video! ❤

[@thecubingduck3723]

THANK YOU FOR THIS!!!! I once had a pop so bad on 6x6 that it disassembled and I left it on the counter for like 3 days disassembled when I got to it I spent like 3 hours figuring out how to do the last layer assembly and I almost rage quit.

[@CubeSolveHero]

So glad it helped!

[@brunodevrieze]

Thx! I had to rebuild one edge from layer three on and your video was a super great help! Thanks a lot! You really are a Hero :D

[@chasethescientistsaturre5009]

This was helpful and the editing was like a j perm great job

[@cubermason8594]

For me, the 4 centers, a tiny bracket , and 4 edges just came out but when I figured where the tiny bracket is,then the centers,and then I put in the edges in that were near the big bracket, and then the edges near the corners.Thanks for the tutorial!

[@lf3055]

Me who doesn’t even have a 6x6: hmmmm interesting

[@hoodeddominoes9792]

Saaaaaame bro

[@michagrill9432]

Well i watched to see how the internals look and work

[@iot9206]

10:00

[@paul_devo]

Thank you 🙏🏻 I popped a piece just before going on holiday!!!

[@PizzaSlice20]

This really helped, my 6x6 popped and now it’s tighter again, you deserves more subscribers!!

[@noriyukitakashima]

I completely assemble the yellow side in the first step and do not do the same thing twice in the final step. Simply loosening the spring is sufficient to release any excess tension that may interfere with assembly (at least that was the case with MGC 6x6x6 etc.) This video is very helpful when it comes to taping. thank you.

[@talentedcuber]

I have been waiting for this since forever!

[@oreokjeks6079]

Assembling a non magnetic 6x6 is the worst thing i've done in ages, and i'm still not done. The last layer is aids.

[@lowin4reel]

It's probably taking me 100 years

[@rohanpandey4738]

Good thing mines magnetic. Couldnt imagine if it wasn’t. It’s already hard enough

[@mrmystergaming]

Thank you so much! This video helped me a lot! I literally needed to assemble my 6x6 3 times but this video made me do it!

[@TheSilkySkewber]

Ah yes my saviour is back with this AWESOME series🥳

[@CubeSolveHero]

😎

[@Monitorbread]

Thanks for helping me fix my 6x6 it took 11 hours atleast if i didnt watch this i would never be able to fix it

[@teomottin559]

You litteraly saved me 😂

[@ShreynikG]

dude ur literally the best it only took me around an hour or 3 (Wasn't counting) with this W tutorial, U earned a new sub

[@cubiksrube4471]

Thank You so much! I have been waiting forever

[@CubeSolveHero]

Was it worth it?

[@cubiksrube4471]

100% The cube actually turns and now I feel comfortable assembling the cube. Eventually I will know how to assemble it of by heart! I never got to do any solves last night, (I am in Australia) but my average is 6 minutes and 2 seconds and my pb is 5.56 I will let you know when it drops. Once again thank you so much!

[@BobbyxdSVK]

I love you, you saved my life I appreciated it sending so much love from slovakia :*

[@durinviirathkh-guzukh7806]

My cat wrecked my 6x6 last night. This video has been insanely helpful in getting it back together

[@joshua5122]

Got mine back together! Thanks!

[@akjha627]

Just assembled by 7 year old's cube and it was very hard to put the 2 lips together on each of the 4 sides. Once I loosened the screw and used the spring to make some space, it worked by putting one lip at a time! Thank you for the videos..

[@drippymissouri]

4x4: Hardest puzzle to assemble?? 6x6: Mere Mortals.

[@Ekhanad]

I recently popped my 6x6 but this tutorial helped me to get it back together My face was in tears but not anymore Thank you

[@arjunthecuber]

Your videos are always satisfying We are always there for you:)

[@CubeSolveHero]

🙌🏼

[@djaric]

That's for this. Had JUST gotten my new 6x6 solved and was trying to look at the inner workings. Well, didn't want that good of a look. It popped apart. 😅

[@max_thegoldendoodle]

Me watching this yesterday: like I’m ever gonna use this tutorial Accidentally popping my cube today: OH CRAP I NEED TO USE THIS

[@alexanderziegler4988]

It really helped me. My 6x6 popped a week ago and I wasn't able to put it back together now I was finally able to reassemble it.

[@CubeSolveHero]

🙌🏼🙌🏼

[@karamjitkaur169]

​@@CubeSolveHero l

[@KPsucksatcfop1567]

This was very helpful for fixing my 6x6 thanks alot😊

[@khatarnakgamerno.1365]

Thanks bro it was very really much much * 10 billion helpful

[@vtsworld8491]

This video saved my life

[@jamesbeauchamp8436]

Thank you I had one of the inner pieces pop and I had to disassemble it to put it back together

[@WilliamCatt-m6r]

thank you for making this video it was very helpful to me

[@gamerglim]

THESE VIDIOS ARE LIFE SAVERS😻😻😻

[@lowin4reel]

Tysm ur a real hero

[@CubeSolveHero]

🦸‍♂️

[@lowin4reel]

@@CubeSolveHero I'm not being sarcastic

[@quepplerep8333]

the pieces look cool, and i would love to see your house! And Tingman is better than TNL cubing

[@MrCraftr]

Thanks so much my 6x6 popped yesterday

[@CubeSolveHero]

Good timing

[@MrCraftr]

@@CubeSolveHero very good timing do you have a recommendation for megaminx

[@The_MAD_Qyuber]

This is a great vision of reassembling my Yuxin 8x8. Thank you

[@zhouhao429]

This help me so much thanks to make this video

[@microwave5127]

can you do an 8x8 assembly tutorial next? My MFJS 8x8 has a popped center piece and im scared that i wont be able to reassembled if i accidentally explode the whole cube

[@MohammedAbdullah2014]

Cube solver hero, for non magnetic cubes, i always do them corner section by corner section! Try it if you haven't!

[@Penetralia666]

a few months one of those small lips popped out (also this same mgc), and the more i tried to reassemble it it broke more apart, this will help rebuilding it, thank you very much

[@jameelaadam502]

My friend gave me his broken 6x6 and told me to fix it and he knew I didn't have a six by six, he said if I can fix it he'll give it to me... Thanks u helped me out a lot

[@kronos_1337.]

3x3 assembly: baby mode 4x4 assembly: expert/normal(if magnetic) 5x5 assembly: intermediate 6x6 assembly:magnetic-hard non magnetic-impossible

[@rtyo-gj7pp]

You are the best

[@CubeSolveHero]

This is the best comment

[@GoneWTFlow]

Where is the 10 star button?!! great effort!! Very inspiring. I got my 6x6 for like $12. I'd need $20 just to assemble it at the factory. Yay winning.

[@ciprianmustata5733]

yeah this is "totally" amazing for those using the Goddamn YJ YUSHI V2 M 6X6!

[@cornbob976]

Thank you sooo much. Extremely helpful!!

[@serp_nt]

This is a life saver, “buddy” of mine had a couple inner pieces pop out, when I was replacing the last one the entire cube broke apart so I had to start from the beginning

[@lasercatto]

I already know how (intuitively xP) but it's still cool that you're doing this.

[@OldManLink]

Woohoo! Made it to the end 😝 Thanks for an interesting and helpful video!

[@Florian01.]

Un grand merci pour ce genre de tuto je ne voulais pas nettoyer mes big cubes car trop dur à remonter mais grâce à ce genre de vidéo j'y suis arriver par contre pour le 4x4 j'ai modifier quelque truc pour que se soit plus simple du coup la j'ai fait pareil

[@colbytoh5528]

Spent more time reassembling the last edge than this video goes for

[@parttimecubing7413]

This would’ve been super helpful a few months ago when mine popped. I got so mad with the inner pieces I just bought a new cube 😂

[@ark_423]

Yeah the same happened to me with my 4x4. I couldn’t assemble it because it was non-magnetic so I just bought a new one

[@CubeSolveHero]

Good thing you have this tutorial so you can re-build the one you have

[@parttimecubing7413]

@@CubeSolveHero very true

[@rk31]

Now you have 2 yj Mgc 6x6s

[@algodoomarbleracing]

Please do the enhanced 5x5 assembly (7x7 assembly) to finish all NxN WCA puzzles.

[@Sphinxery101]

Pls do a 7x7

[@spthegamer7879]

Bro I am literally about to cry u made my day :) thnk u so much for helping me, Best wishes from me to u, keep up the great cotent.. :))))

[@yasirmalik2600]

Love the vid. Absolute life saver ❤!

[@LEVKAD2025]

If i hadnt seen this video, i would have smashed my cube like 20 times alrwady, thank you

[@vaibh2023]

Cool. 33 min ago. Now I just need to get a 6 by 6

[@CubeSolveHero]

Make sure to use discount code HERO 😂

[@bencedekany2248]

Hey Cubesolvehero! This tutorial was super helpful. I could finally assemble my 6x6 after a long time. The only problem i'm having right now is when i'm trying to turn 3 layers, the cube gets stuck randomly and I can hardly turn. Can I fix this somehow?

[@BlooketPro-fe8rr]

I have this lock up problem at my 4x4

[@1-methyl-2-ethylimidazoliu7]

Just buy a better 6 by 6

[@oliverkessler07]

Have a look at the tensioning screws, maybe the are too far out and block the inner layers

[@amoszer3211]

Thank you with this video I solved 10000 of problems

[@FloorTyle_]

It’s been 3 almost four hours of nonstop trying to fix my moyu 6x6 and its been a pain. At the last steps and i am in pain.. but this video is helping

[@m4ynard526]

After solving 4x4 and 5x5 i felt i was ready to try 6x6. Started solving it really fast and the cube literally EXPLODED in my hands. After two attempts, a lot of yelling, swearing, raging (especially by trying to fix the lips on the last layers), i was able to reassemble the cube. Thank you. You got i like and sub, even if i get re-traumatized by just hearing your voice.

[@zouldiaz482]

ty for teaching me

[@thoishansen]

Thank you so much for this. I had to reassemble my 6x6 last year without a tutorial and it took me more than a week so this will be useful next time it pops

[@nicoleborcelas3094]

Thank you so much 🥰 It really helps so much

[@cacacuate505]

Thanks to you, I assembled my 7 year olds cube. It was the hardest thing I've ever done as a parent and I'm only partially kidding. Lol

[@CubeSolveHero]

That’s awesome!! So glad this was able to help you!

[@ghs4u]

Thanks a lot even if the cube died a few times I finally fixed it! You earned 3 subs

[@euphoric_gaming]

TYSM!

[@CubeSolveHero]

Absolutely

[@Joshuarichardkirby]

Thank you.

[@EvanStein1974]

The center 4 pieces of rows 2 and 3 (or 4 and 5) and the 2 white brackets have come off of my son's 6x6. I am very scared to further disassemble the cube in order to reassemble it but, based on this video, I suspect that's my only choice. Is there an approach I can take to minimize the chances of pieces breaking during the disassembly and re-assembly.

[@GamingAnimations-sx6mn]

Hey cubesolve hero have any cubes you have unboxed on camera became one of your mains?

[@CubeSolveHero]

I’m working on a 2022 mains and goals video next 😎

[@GamingAnimations-sx6mn]

Very cool looking forward to it!

[@MohammedAbdullah2014]

Do a 7x7, 3x3 and 2x2 assembly using your same method!

[@rain287]

Thank You

[@ZebraCubes]

I don’t even have a 6x6 but Great video!

[@CubeSolveHero]

Time to get one!

[@Chloe90125]

This video really helped thanks!

[@CubeSolveHero]

🙌🏼

[@texaswasherpitchers]

I have a question: why does the 6x6 include those wing like pieces on the centers?

[@FrostyFN_123]

Can u do 9x9

[@pll__skip]

I’ve been waiting this video for almost a year (11 months)

[@Daniel__Gaming]

Now this is why every time someone borrows my cube I tell them to be very careful also how many cubes did you sacrifice for this?

[@FabioRossi-Speedcuber]

ty so much for the vid

[@gamingwithkacper]

11:39 im struggling to put the edge in, been doing it for over 3 hours now

[@queensgambitdeclined]

SAME

[@benb5124]

I've found that it's easy to get the edge in, but seemingly impossible to keep the brackets where they are

[@gamingwithkacper]

@@benb5124 keep trying I did it after many hours but it is a lot harder than assembling the 4x4

[@josiahjulin1277]

Is this same method applicable to a 9x9? Is it applicable to a cube from a different manufacturer?

[@TheWeirdDudeCalledToon]

when im trying to put the last edge in, the smaller brackets keep falling out. any indeas on how to do it?

[@cheesecak11857]

same, did you find a solution lol

[@The_Cubeologist]

nice job you are the best at teaching my tutorials suck compared to yours. congrats professor!

[@CubeSolveHero]

Glad I can do something right, lol

[@3m0_editz]

Thank you so much

[@CubeSolveHero]

Glad it helped

[@damienhernandez1524]

Hey can you make a video on how to make a 8x8 because I've had this for 2 years and it just recently broke and I've been trying to fix it but then I don't know