5:39 yes, it is very advisable to connect it to a cylinder before you go diving !!
@mrneede3 жыл бұрын
Thanks for the video. That was perfect it answer one of the questions I had. I was adding an octopus and I moved my primary that was in the back to front and the Octopus to the rear. My scuba shop had everything in the back holes. No big deal but it appears the front is better. Thanks
@DJMagia4419 жыл бұрын
Awesome video. It's a lot easier than I thought. Thank you.
@harrisongang6 жыл бұрын
Thank you so much for the detailed instructions. You answered all my questions. Great instructional video!
@smrtcarsmrtcar8 жыл бұрын
Good video. Thanks for the info and confidence I can do this assembly.
@andreasoberg2021 Жыл бұрын
This was a great video. In My Apeks MTX RC manual they say tighten with 46Nm. Is that what you are doing? 46Nm sounds quite high to me.
@mcpuckles14596 жыл бұрын
I recently got certified and got myself a kit but no cylinder.. any ideas on how i can set up my regulators safely so i dont break my equipment?
@flatheadfletch2 жыл бұрын
The plugs have O ring. Do the high and low pressure hoses have O rings on them ?
@dominicchkaaka3 жыл бұрын
very well explained! I thought it would be way harder
@aaronfrncsco42465 жыл бұрын
Some people suggests using lubricants when assembling regulators. Do we really have to?
@riverstudent30323 жыл бұрын
Really good information 👍👍
@antreasioannou35358 жыл бұрын
Hello guys i need some help.. I am using Aqualung Titan LX requlator and by an accident it got a pretty hard hit on the first stage. I opened them on a shop with a professional but we were not able to find exactly were the damage is. Any way if i buy any other 1st stage from Aqualung or Apeks am i gonna have a problem ? Is it going to be dangerous ?
@seikibrian86417 жыл бұрын
Any Aqua~Lung first stage should work. Another Titan would be a natural match, but you might want to upgrade to a Legend 1st stage if it fits your budget.
@rahimi9674 жыл бұрын
Nice sharing this video
@SeattleRingHunter7 жыл бұрын
Is he recommending to pretest fifteen cycles on the reg before each dive or just on new equipment as a commissioning / burn in test?
@mxamiss54 жыл бұрын
There’s a hole that says 300 bar 4500 psi. What should go in there?
@salmansadeq11673 жыл бұрын
Air cylinder is the only thing it could be.
@skinz1234 Жыл бұрын
Anybody use thread tape when setting up your regulator?
@grunt_stylet40939 жыл бұрын
great video im been looking for a video like this :)
@R4DZIOL10 жыл бұрын
hi do you sugest any lub while assemble ??? regards
@andyg7358 жыл бұрын
Silicon grease will be best. Just a warning though, it does have hydrocarbons and is therefore flammible when in contact with high levels of O2, but only if its air that is 60% O2 or something. So it won't be a problem with the average diver
@seikibrian86417 жыл бұрын
No, do not use any lubricant when assembling your regulator. You want a tight friction fit on the hoses so they don't become loose with use.
@diveactive2 жыл бұрын
But what way does a don fit face ?
@rajwoodson6 жыл бұрын
this is very informative. dummy question - so both regulator and octo need low pressure hoses and BCD / gauge will need high pressure correct?
@orhanrujevic37786 жыл бұрын
BCD is a low pressure hose as well. gauges and transmitters go to high pressure.
@coofhair3 жыл бұрын
thankyou
@cajicoutinho38996 жыл бұрын
many p How orts are there for first stage .how many low n high pressure ports n which fits in second stage n octopus
@bdtrap2 жыл бұрын
It depends on the specific 1st stage. You can get an inexpensive 1st stage for $100 with 1 HP port and 2 LP ports, or a 2 High / 5 Low for $250. If you're not using a transmitter, then 1 HP will probably be fine. If you're solo diving or are okay w "buddy breathing," then you'd only need 2 Low Pressure - one for BCD and one for 2nd stage. There are other considerations like piston/diaphragm, balanced/unbalanced, etc.
@GIJOE5733 жыл бұрын
No Teflon tape?
@diveactive2 жыл бұрын
What about din fit
@scheepalicious10 жыл бұрын
Thanks for the video!
@ansonrinesmith Жыл бұрын
How about telling us what size allen key?
@54teddyxiong10 жыл бұрын
nice video
@dtrcServerinfo5 жыл бұрын
Can u add a third for like a full face mask
@rpersaud5629 жыл бұрын
How many "nicks" in a twist...
@friggincanvee5 жыл бұрын
1 nick = 2 bobs
@mossmyd83786 жыл бұрын
Nick it up
@seanstrickland49709 жыл бұрын
nicks lol.. good vid
@balladinleloup9 жыл бұрын
Il faut faire des video french aussi pour ce qui parle pas angliche merci