This is the most informative instruction on how to balance the gimbal on youtube.
@GeekyStuff Жыл бұрын
Thank you 😊♥️
@C5films3 жыл бұрын
Buddy, by FAR the most informative, salient, helpful video on this gimbal. I was actually ready to throw it in the bin as I couldn't decipher the instructions or guides elsewhere on KZbin. This has genuinely saved my sanity! Kudos to you mate.
@GeekyStuff3 жыл бұрын
Thank you so much for your kind words. I even put in the description that this is probably the best guide to setup the weebill-s but I thought I was being too cocky lol. I struggled setting mine up too, so I decided to make this detailed video! Really glad it helped 👍
@C5films3 жыл бұрын
@@GeekyStuff I Guarantee this IS the best guide to setting it up, and it's a crying chame that it has the low view count that it does. You should make MORE of these my friend. The Weebill is a popular tool for many and the quality of guides and advice is lacking in my opinion.
@GeekyStuff3 жыл бұрын
@@C5films Thank you mate 👍
@anjeanettephotography60013 жыл бұрын
Excellent video-Love the Zhiyun but was so frustrated that I couldn’t figure out balancing....you step by step explained this far better than any other video or the manuals I appreciate you!
@GeekyStuff3 жыл бұрын
Thank you so much for your kind words! Glad this video helped! I made this video because I too struggled setting it up. Other videos didn't go into too much detail and didn't show close up shots of what they were doing either. I think I demonstrated everything 👍
@reflexfine82672 жыл бұрын
You definitely did. Thank you. I agree about other videos
@Kamal_Chilaka3 жыл бұрын
Best video I’ve seen on balancing a camera on the Weebill S. 👍🏼
@GeekyStuff3 жыл бұрын
Thank you very much 😁👍
@wildheartt98523 жыл бұрын
Agree! Thank you!
@GeekyStuff3 жыл бұрын
@@wildheartt9852 ah great! 😁 Let everyone know 😂
@sowrirajanranganathan94273 жыл бұрын
Hi i was struggling for an hour to set the pan balance after seeing your presention it's clear ....it took only five minutes to understand and set it.....super sir...Thank you
@GeekyStuff3 жыл бұрын
Perfect thanks 😊
@Travel_Blogger462 жыл бұрын
I’ve been struggling to find the right video which could help me in balancing the Weebill s gimbal. I’ve watched other video’s on KZbin, however, this is the best video with well explained steps and precise content.. thank you.. tons of love from India ❤️❤️
@spudwas3 жыл бұрын
Your Video is the best of all the others.Kudos!
@GeekyStuff3 жыл бұрын
Thank you sir 😊
@peterkoch31162 жыл бұрын
Best balance setup video on KZbin.
@curtwalton72842 жыл бұрын
You were BRILLIANT in how you explained everything. Weebill should have you and your tutorial on their website. I was SO GLAD I found you. Seriously EXCELLENT job and Thank you!!!
@GeekyStuff2 жыл бұрын
Thank you so much, I'm glad this video helped 👍💥
@trock5363 жыл бұрын
Thanks SO SO much for this tutorial! I watched at least half a dozen others that simply didn't help balance the Weebil at all, and I was just about to send it back as "unbalanceable". I followed your steps and I now have a beautifully working gimbal! Thanks!
@GeekyStuff3 жыл бұрын
Ah that's really nice to hear. So glad it helped you 😊
@tunesidig3 жыл бұрын
Watched at least 6 or 7 setup guides, this one was the best. Thanks dude!
@GeekyStuff3 жыл бұрын
Cheers dude 👍😎☺️
@seasonedgambler9704 Жыл бұрын
I will not lie, u have saved me. veryyyy clearrrrr explanation!!
@GeekyStuff Жыл бұрын
Glad it's helped 🙂
@markmywords86742 жыл бұрын
Nice job and very helpful, especially for the pan-axis adjustment. Best explanation for this I've found. Cheers.
@iolanisjourney48283 жыл бұрын
So very helpful, thanks for showing in detail which lever is associated with each axis motor!
@GeekyStuff3 жыл бұрын
So glad it's helped you 😊
@directorchee2 жыл бұрын
I’ve been using this the wrong way all these while🥺 This is the first in-depth tutorial I’ve seen on how to balance this gimbal. Thank you so much ❤️
@GeekyStuff2 жыл бұрын
So glad it's helped you 😁❤️
@mkamka1112 жыл бұрын
Best tutorial!! Thank you for taking care of all the small details
@GeekyStuff2 жыл бұрын
So glad it was helpful ☺️
@activatedvisuals3 жыл бұрын
The best method of balancing the pan axis.....Thanks for the information.
@GeekyStuff3 жыл бұрын
Thanks for watching 😄 👍
@reverend11-dmeow892 жыл бұрын
one thing that I was not aware of, by watching an Weebill S balancing video that missed the step of adjusting the vertical mount in the upper-most gimbal to get it to where it will stick in-place no matter how one points it. If you do not do this it will lean forward or backward when one lets go after pointing it manually.
@ThePodcastStudioMiltonKeynes3 жыл бұрын
Very helpful video dude! I have a Weebil S arriving in about an hour, cant wait to set it up using your video thanks man!
@GeekyStuff3 жыл бұрын
Ah Wicked man! It's a great gimbal! You should have no issues at all following my video! Good luck 👍
@akhileshsasindran80772 жыл бұрын
Was great video for knowing about pan axis 💕
@jimlyle44072 жыл бұрын
Quite nicely done, both the narration and the video shots. For me, at least, better than the Z video. Thank you. Takes a lot of courage to go public.
@abbasmehdi69807 ай бұрын
Really great and to the point thanks alot
@DopamineOverload3 жыл бұрын
SUPERB setup / balancing video. Absolutely superb and extremely helpful. Quick question-- re: a custom quick-release or arca swiss plate... which do you recommend? The long one isn't ideal when switching to handheld or putting on a slider. Thanks so much!
@GeekyStuff3 жыл бұрын
Hello mate, thanks for the kind words and thank you for watching :) I am sorry but don't really use any quick release on the gimbal.
@CameraBlackfreezA Жыл бұрын
Thanks for everything you a life Saver
@MrDKDIY3 жыл бұрын
Nice thanks a lot very informative video bro ! Thanks a lot for that !
@GeekyStuff3 жыл бұрын
Thanks for watching mate ☺️
@LoverOfTech2 жыл бұрын
very helpful this one mate. thank you
@GeekyStuff2 жыл бұрын
No problem dude 😎👍 Enjoy your Weebill S
@sanjaygjoshi1 Жыл бұрын
Very Very Informetv Tutorial i m showing many Tutorial but i thik yor tutorial perfect 👍
@hannahsaywell81110 ай бұрын
Awesome video. I did everything and when I turned it on it didn’t do that auto align thing that yours did, do you know what they could mean?
@thomza3 жыл бұрын
Great video! Where's the video to get the horizon level for this gimble? I can't find it.
@GeekyStuff3 жыл бұрын
Hi Tom, thank you for watching. Unfortunately I've not got round to doing that yet. Sorry 😔
@thomza3 жыл бұрын
@@GeekyStuff please do. It would be greatly appreciated!
@xorlakanfra50092 жыл бұрын
This is beautiful
@akoyoat2 жыл бұрын
thanks very helpful
@Mechrank Жыл бұрын
What lens is that? Looks amazing on gh5
@DRIVENPURSUIT2 жыл бұрын
Good job
@reverend11-dmeow892 жыл бұрын
One bit of frustraion with getting Weebill S setup would be for Zhiyun-Tech to stick all three of the red lock/unlock buttons on the same side. Unless I am missing something hidden, there appears to be no reason why the odd one out could not be moved to the same side as the others when all three are locked for a custom-fit case. Oh, Weeble S also falsely claims "axis-lock" even when all three axis (plural, however that goes) UNLOCKD when no camera or recorder is mounted, when it should be a reminder to stick the camera or whatever on first, not unlock axis that are already unlocked, eh. ;)
@CringeOMusic Жыл бұрын
hey hey i loving ur video but am so confusions at the first axis. mines is not levels when doing the balance on the axis arm thing but is balance from the quick release mount? does it matter which using is not much difference no?
@chenlyn-cj8ve Жыл бұрын
All the three axes should be well balanced. For long use, suggest balance it perfectly before powering on.
@16goncalo Жыл бұрын
i'm trying but after level the axis, doesnt stay in the position where i leave it, goes to center level..
@josemelgoza46983 жыл бұрын
Does anyone know what to do if camera is too "right-heavy" and there is not enough space to move camera to the left to get it properly balanced on the roll axis?
@thoughtfulsd3 жыл бұрын
How to quick Release the camera from the Gimble after balancing so that I don’t have to balance the camera again
@rhettoracle96794 жыл бұрын
Don't let your Weebill wobble! Cheers
@KALYAN450002 жыл бұрын
👍
@mssapmaz3 жыл бұрын
Thank you very much. It is a crystal clear guide (frustration-free gimbal balancing)
@riponroy1263 жыл бұрын
Nice thanks a lot very informative video bro ! Thanks a lot for that !