How to Bind RadioLink RC8X Transmitter to Receivers?

[@sonarfleet2375]

I trying to use telemetry but the connector is swapped (polarity). I am using R8FG receiver with cable telemetry.

[@Radiolink_official]

Hi, sir. There is no problem of the sticker of F8FG. Just follow the sticker to plug in the cable. Here is the detailed manual of R8FG for your reference. www.radiolink.com/r8fg_manual If any question when using RadioLink products please feel free to contact us. Our email is: [e-mail]

[@joshuaspruce9209]

Yes I have this controller and I like the look and feel of it but it will not bind to the receivers it shows that it is it flashes green when I press the button rapid flash and then it goes solid but it doesn't operate my vehicles.

[@Radiolink_official]

Hi, sir. May I know if there is signal tower on the screen of RC8X after the LED of receiver goes solid? By the way, please do not keep the transmitter too close to the receiver when binding or after binding. If there is still any problem of binding, could you please send a video to [e-mail] ?

[@joshuaspruce9209]

Yes there is a tower I've tried everything I will make a video and send it.

[@Radiolink_official]

@@joshuaspruce9209 Great. We'll wait for your video. You can send it to our email [e-mail]

[@marcushills23]

When I go to add another receiver to a different model let’s say 3 it still works on model one

[@Radiolink_official]

Hi, sir. Model Select on RC8X is to save datas for different models. You can switch other model datas when you switch controlled models. If you want to control different receivers to control, we think you may need ID seed function on RC8X. Here is a tutorial of ID Seed functio for your reference. kzbin.info/www/bejne/mqGZdaWfjsyIntk If you want it, you can set on RC8X. Check more details of ID Seed (Subsidiary ID) in the detailed manual of RC8X. www.radiolink.com/rc8x_manual If any question when using RadioLink products please feel free to contact us. Our email is: [e-mail]

[@luisflicks4974]

Why won't my receivers turn on when I turn on the power to the esc.

[@Radiolink_official]

Hi, sir. Make sure the polarity of the cable is not reversed. You can get the working voltage of the receiver from its sticker. The voltage of the power supply cannot exceed the working voltage of receiver. If the power supply voltage exceed the working voltage , the receiver will be burnt out. If your receiver still cannot be turned on with a battery connected, the receiver may be burnt out. We recommend you to send us a video to find out the problem of the receiver. If any question when using RadioLink products please feel free to contact us. Our email is: [e-mail]

[@joshuaspruce9209]

​@@Radiolink_officialwhy will this controller not work shows to all lights flash like they are supposed to but nothing happens.

[@Radiolink_official]

@@joshuaspruce9209 Hi, sir. Do you mean that the LED light of the receiver does not flash or respond when you press the binding button? If yes, the binding button may be damaged. You can send us a video to show it to confirm it. Our email is: [e-mail] If any question about RadioLink products please feel free to contact us