RadioMaster TX16S with HALL Sensor Gimbals - Binding to DSMX and DSM2 Receivers

[@zeejimi4044]

Thank you for this great video : I have had a DX6i for years, and I have now bought a TX16S, but I was in the dark about how to use it until now, and a video is much easier and faster to understand than the boring instruction manual. 👍⭐️👍

[@TikiJawa]

Just got my TX16s today...re-entering the hobby after a decade or so! Thanks for posting these videos, they are definitely helping get the radio and the Sport Cub S2 ready :)

[@wolfdronefpv4040]

Can you have SAFE Select from the Spektrum DSM2/DSMx receivers and can you see the telemetry from the Spektrum ESC's in the RadiomasterTX16s?

[@GolfingCellist]

Hello from New Zealand. Great video and very helpful to a newbie. Thanks.

[@PropsWheels]

Hi Dave. Glad it was helpful! Thank you so much for your comment. Apologies about my late response!

[@warbuzzard7167]

Thank you so much for your excellent video. You are a great RC dude!

[@PropsWheels]

Thank you too WarBuzzard! Cheers!

[@InteractiveDNA]

Great tutorial, thanks! I am getting a RadioMaster TX16S because I need to control many types of heli, drones, etc with different receivers and this radio is not a brick with sharp conners like so many other are.

[@LeonardoCostaUSA]

Best video on the KZbin for that subject. Thank you 🙏🏻

[@greatgandalf5233]

Really good video... my Spektrum DX-8 had a fault and shut down... Luckily I had a new TX16S and you had me up a running within 10 mins, thanks a lot!

[@loosein1]

Daniel, if I have a ar631 or the ar637ta(concsendo evolution 1.5m) will I be able to set up the receiver/tx (radiomaster tx 16s) and use the "Auto leveling" feature that comes with these receivers ? thanks so much for time and videos.....that are greeaaat !

[@taildragger1589]

I am very new to the tx16 and have transferred three front yard models. Along with replacing my dx6e, I replaced the UMX brick with lemons new brick (dsmx). I unwittingly bound them all to dsm2, never occurred to me I can select that last item and switch it to x. Your video showed me that thank you much. Also for lemon aficionados, you have to select elevons and vtails with the receiver programming button and not through the transmitter.

[@I_am_archie]

I dig the lemonRx too

[@DanielCValot]

Thank you so much for your videos, I learn a lot from you. You explain everything so well and easy to understand Happy Flying to you, please keep making your videos! Daniel

[@warbuzzard7167]

Superb work here, friend.

[@PropsWheels]

Thank you! Cheers!

[@62heliman]

Awesome, haven't touched my radio master in 3 months due to winter. Very good review for me.

[@hillscanlon2717]

Great Plain setup very happy other people are just too fast and make things complicated thanks looking forward for more thanks again.

[@elpapigrande4035]

Maybe you could help me out. I’m a little confused. First let me list everything I purchased. I purchased the OMPHOBBY M1 3D helicopter. I purchased two other batteries for the M1 helicopter. I purchased the charger to charge those batteries for the M1 helicopter. I purchased the TX16S controller to control the M1 helicopter. Also purchased batteries for the TX16S controller and a charger for those batteries. Do I have everything I need to get flying or am I missing something? I noticed on the TX16S controller there’s a compartment over the battery compartment. What exactly is that for?

[@egertkabilattekivi2496]

I like open tx and i use still open tx on my tx16s 2024.Everything works like champ.4in1 is best.Love it.

[@user-rx8qq8sk9ydv1ce5ib]

Thank you for the video. Would you please make a video on binding Radiomaster Tx 16 to Spektrum AS3X and show us how to enable the AS3X Gyro, reset it if taken from a BNP model, and how to assign a switch for disabling the AS3X Gyro if need so that it works as a normal Receiver during flight . Many thanks

[@eugenenault4935]

Very informative video. Waiting for TX16s delivery. Thanks

[@PropsWheels]

I am glad you like the video. I hope you will get your TX16S soon. Best regards.

[@Peter.Jensen]

Great tutorial, thanks for sharing this.

[@dougmcpheters1546]

Hey there. Very nice video! Glad I found your channel!

[@DanielCValot]

Sir, this is a great video! I am so grateful, I just bought my TX16S and you make it very understandable. Can you make a video to show how to download plane profiles that were emailed to me from a friend to install in my radio? He sent me 6 profiles for 6 different helicopters to put in my radio. I already installed companion in my computer and that is where I am at now. How to I get the files from the email to the radio?? Please and thank you in advance!

[@karlhawley342]

thought you had to push the button when you buying those receivers to that, the button on? 🤔

[@woodyhomer5916]

great video just ordered the TX16S looking forward to using it moving from Spektrum its good that it covers all the bases.

[@PropsWheels]

Thank you Woody! I have been using my TX16S for over a year now, and I absolutely love it. I hope you will enjoy yours as well! All the best.

[@MichelleSmith-ce2qm]

Hi im new to flying and going to purchase a radiomaster tx16s what would you say for the best one 4in1 or the elrs ?

[@misaelramos83]

Probably the 4 in 1. It can be retrofitted with whatever ELRS is.

[@shkyhighscotty]

Great job! Worked perfectly 👌

[@FOSoon]

thank you for this great video. Is a good start for me to understand the various protocol by different radio makers. How this can overcome to use different receivers from those makers

[@francescolocorriere]

But why if you turn off the receiver you don't receive on the radio the allarm ?

[@quinnpatrick997]

Hey can you do a video on how bind it with a eflite receiver plane with safe select, I manage to bind it i keep getting this alarm saying telemetry low and it would cut off my power in less than 30 feet away, then after i saw a video to just disable telemetry on the receiver since the telemetry on eflite planes are just “fly by” telemetry, I manage to get atleast 1/4 miles on until i lose power. Thanks

[@PropsWheels]

Hi Quinn. Binding it to a SAFE plane is on my to-do list (I just have way too many competing RC projects, and very little time left from my job and family duties). I had telemetry warnings when I was flying my E-flite UMX Mig 15 EDF jet, but I did not experience any power cut offs, probably because this plane only had AS3X, but not SAFE: kzbin.info/www/bejne/bmPRmImIhtV3mdE To tell you the truth, I do not like SAFE or other similar technologies on larger planes. I prefer flying full manual or just with some stabilization such as AS3X. Small planes are fine with SAFE and for beginners, since they are inherently quicker and more difficult to control. In any case, I will try to record and post a video about binding to a SAFE plane. I am not sure if I have a plane with SAFE Select though. Best regards

[@michaelbryant3643]

My spectrum receiver is not blinking when I press bind and also the bind_ex function is not working. Anyway to reset to factory or anything ? I have Mobula6 DSMX spi. Tx16s transmitter

[@RumahkreatifKalibasau]

Thank you so much for you sharing my friend

[@PropsWheels]

Thank you too my friend!

[@kunad2294]

hello, I'm guessing this will work for a new helicopter setup, how do you set the esc soft start & brake .

[@phantomcipi245]

I want to use the remote control for a brushed rc car, do you have any idea if I can set the engine to go back and forth?

[@michey7822]

Thanks bro. I will transfer all my planes from dx7 to my tx16s

[@stephen3966]

I had very bad experience with DSM2 and Tx18s. I lost 3 heli with this new setup. Sudden lost control and throttle shut down 10 feets away. All pre /post crash ground walking range test over 150m. Not certain if that is problem with Vbar or not, or due to jamming by fellows 2.4G( more than a dozen people flying nearby) Previously same DSM2 receivers with DX7 without problem for over thousand flights at the same spot, just a couple of days ago before the crashes. Now all changes to RadioMaster receivers 168,161 with RSSI.

[@stephenn434]

Can you explain more about the model setup "channel range" selection? It showed only channels 1-7 when you selected DSM so does that mean spektrum receivers with more than 7 channels are not supported? Thank you.

[@williamnale7835]

Great video, liked & subbed. I just got a new TX16S Max this week and would like to move everything over to it. I'm waiting for the TX battery to come in, so I'll stay with the NX10 for now. The TX16S feels and looks so much better than the NX for significantly less money. And I'm not locked into just Spektrum now...

[@tariqyounus3880]

Pls guide , Before binding my receiver found this , On module status ,said Module update recommended?? What's that's mean . Also can bind turnigy 9x8c V2 receiver and HK TRGA V2 RECEIVER ?? If try bind so what protocol ?

[@Sandokans]

So with this new radio, is not need to be change channels on rx, TAER over AETR?!

[@eduenglishteacherrcdronepilo74]

I just got a LX F-22 Raptor EDF 2x70 MM I wonder if I can use the Radiomaster TX16S carbon red on this F-22 but I don’t know 🤷🏻‍♂️ which receiver to Buy , on the box it’s... written 12 Channels…

[@terryremsik3418]

this is great... would you have info how i would bind this radio with Horizon Blade Nano S3 ?

[@burhankaranjia9130]

Very well made video. Super helpful

[@dieforyou0077]

Hi can you show me how to work as3x and safe mode on spectrum receive ?

[@PropsWheels]

Hi Chy Keng. Another subscriber asked the same thing, and I am planning to do a video on this topic. My only AS3X and SAFE airplane is a HobbyZone Champ S+, so I will try setting up this plane on my TX16S. Please stay tuned, that video will be coming soon.

[@dieforyou0077]

Good. i am waiting for it .

[@prtbk6836]

Thanks for helping.

[@duschiavon]

Hi. I bound to many Spektrum rx, from 6ch to 12ch fail safe. I took a motorized glider up to where I couldn't even see the plane anymore and never, I repeat, NEVER lost control. Only with the Spektrum AR9350 that works a little funny. Even setting up a new model with only one AILE and one ELE, receiver still gives me AILE in 3 different channels. Same with ELE... TX16S does not work with Futaba FASST rx, only with FHSS. I love the radio but I'm not ready just yet to use on my 35% gas plane

[@PropsWheels]

Hi Eduardo. Thank you for sharing your experience with the Spektrum receivers on your TX16S; I am happy to hear it works well. I did not know it does not work with FASST; thank you for pointing it out. I hope they will add that at one point. Take care.

[@Dashone93]

Do u have signal issues with spectrum rx’s

[@pea2911]

very helpful video. I just looked at all your videos, you have a great channel, so I subscribed, thanks again! can I ask, everytime I power up a Spektrum receiver, is it a good idea to power it up with full throttle and follow your explanation to calibrate 100% throttle and 0% throttle? even with my old DX6i? It's getting old and temperamental so I'm researching the Radiomaster TX16S as a replacement. thanks again :)

[@PropsWheels]

Thank you Pea's Kites & Drones. No, you only have to do the ESC calibration once during the pairing of the transmitter and receiver. Good luck with your new transmitter purchase.

[@hubblehosting8862]

I have the Radiomaster TX16S MKII transmitter ELRS w/ AG01 Gimbals. It's ELRS by default, not the standard 4-in-1 (multi-protocol) setup. Can I can connect this radio to Spektrum receivers as well? Thanks.

[@THEbuffamericanguitarist]

no

[@cjb405]

Does the new radiomaster tx12 have dsm protocal built in?

[@brianheaton5521]

Yeah, he bound the Rx to it

[@oscarescales9689]

It's working the spektrum telemetry as well? In case to bind a spektrum receiver with this function. Thank you in advance Regards

[@PropsWheels]

Hi Oscar. Since I do not own a Spektrum receiver with telemetry capability, I was not able to test this function, sorry. Take care.

[@jlester42]

I get telemetry on my TX16S from my Spektrum receivers just fine; even from my little UMX Turbo Timber. You might experience signal loss indications on the TX16S of the telemetry, but this fairly normal as the telemetry signal from the receivers is usually very weak, unless they specifically state long-range telemetry. Do not confuse this with flight control signal strength. which is fine. ~ 2 km, and I have seen as much as 4km range demonstrated. Also, telemetry doesn't like when the TX16 is really close to the receiver. it will constantly drop and re-establish telemetry.

[@jelly-qs5fy]

Is it possible to do a video showing how to set up the AS3X function on a switch to turn it on and off and perhaps a panick button for 3 different flight motes just like you find on the e-flite safe select bind & fly planes? Also do you know if the bind process would be the same with a lemon RX

[@PropsWheels]

Hi Adrian. I have a HobbyZone Champ S+, which I think has both SAFE and AS3X technologies built in. I will try to bind my RadioMaster TX16S to it and check if I can get all 3 flight modes programmed. If I can, I will post a video. I do not own a Lemon-RX receiver, but since these are DSM2/DSMX compatible, they should work. I will order one and try out soon.

[@jelly-qs5fy]

@@PropsWheels much appreciated

[@PropsWheels]

Hi Adrian. I just placed an order for this 6-channel Lemon-Rx receiver: lemon-rx.com/index.php?route=product/product&product_id=180 I expect it to arrive in the next 7-10 days. Once it arrives, I will make a video on binding it to the RadioMaster TX16S and post it. Please stay tuned.

[@jelly-qs5fy]

@@PropsWheels absolutely excited and thank you ! In theory I would like to have one of my planes on the lemonrx + , which has flight stabilization, similar to what the as3x safe technology does when programed to a switch. So when in danger I could flip a switch and the auto stabilization kicks in... also showing how to set up flaps would be so helpful. More than anything I appreciate the help and I'm sure there are many whom would benefit from this information. Again thanks

[@PropsWheels]

@@jelly-qs5fy Hi Adrian. I just installed and tested my new Lemon-Rx receiver in one of my new planes. The binding process was the same as the Spektrum DSMX receiver. I will edit and post the video later this week. I hope this helps.

[@ThisIsDavesGarage]

Why don't you change AETR to TAER (spektrum standard)? When you bind a Spektrum TAER receiver and a Frsky AETR receiver to the same TX16S do you always have to change the channel order manually? Or will the receiver # number change if for you when you model select?

[@PropsWheels]

@TheFinalApproach No, I did not have to change any channel order. The standard AETR setup works on my Spektrum and other DSM2/DSMX receivers.

[@8poundquark]

Thanks. Very clear instructions.

[@TechNoPhobiaGirl]

Just found your vid and I'm VERY happy! I setup a model in my RM TX16S and tried to bind it to my Blade Nano S2. I have the exact same DX6i as you but something's wrong with it and every model I've tried to fly with it has done something screwy in flight, hence the new TX16S. Don't know WHAT I did wrong, but when I tried to bind it, the light on the heli went RED, the rotors spun up to 100% and I had no control/wacky control (ie. channels moving the control surfaces all out of whack). I tried it SEVERAL times to no avail. Don't suppose you HAVE an S2 that you could setup/bind to the RM? Thx for the excellent, straight forward vid!

[@hillscanlon2717]

Very happy with open tx, now some people are going to EdgeTx, I fly fixed wing planes, only 😀 your information is excellent and great information thanks so much just I not interested in touch screen stuff. What do you think thanks again very happy with I have in opentx looking forward.

[@k_berm9deddy93]

can the redcon DSM2 Ar6100e receiver bind to the tx16s?

[@PropsWheels]

It should. I used some generic (Spektrum knock-off) DSM2/DSMX receivers with the TX16S, and they bound and worked fine. I also used Orange and Lemon receivers without any issues.

[@fklotaloi]

Can I use XK130 helicopters with it ..pls answer. Thanks

[@PropsWheels]

Sorry about the late response. I will try to do this sometime soon. Take care.

[@k_berm9deddy93]

does anyone have a redcon cm 703 receiver binding?

[@flightsimulatorx98]

Yep, i use redcon cm703 with the tx16s

[@printer5518]

Very helpful thank you

[@flashg1160]

Thank you

[@henryoldach9078]

Did you ever find out how to bind a fasst receiver?

[@PropsWheels]

Unfortunately, while I was researching this topic online, someone on a RadioMaster TX16S forum indicated that FASST is not supported (at least not yet). :(

[@fahadhos]

@@PropsWheels please can you tell me is this transmitter going to be work on wltoys model f959 rc glider this glider is 2.4G 3ch In reciver written XK-f959R

[@fahadhos]

@@PropsWheels please can you tell me is this transmitter going to be work on wltoys model f959 rc glider this glider is 2.4G 3ch

[@alex26i]

Fasst is encrypted. It will not be available.

[@antoniopascali1120]

Does it bind to any spectrum reciver?

[@PropsWheels]

Yes, it does, to all DSM2 and DSMX receivers.

[@tykendrick800]

@@PropsWheels no. I have a spedix 250 spektrum and it act like it bind but don't show that it's connected on remote.

[@badmofo350]

Do you know if the tx16s word with the new spektrum slrx2 protocol receivers? I think it probably will since they work with my old DX8.

[@PropsWheels]

It should work, since the SRXL2 is a DSMX receiver.

[@user-rx8qq8sk9ydv1ce5ib]

Thanks for the video mate. From where you get this Cessna ! Thx

[@PropsWheels]

Thank you for watching Rbta. I got the Cessna from a seller on eBay about two years ago. The package was shipped from Value Hobby in Illinois. I just googled it, and here are the links to the PNP and RTF versions: valuehobby.com/55in-cessna-epo.html valuehobby.com/6ch-55in-cessna-epo-rtf.html In any case, you can find it through several online stores. Check out my review videos of this airplane: kzbin.info/www/bejne/h3Sxeopoh9mIrac kzbin.info/www/bejne/pWLaq2eJqpWFb5Y Cheers!

[@user-rx8qq8sk9ydv1ce5ib]

@@PropsWheels omg. I really appreciate your help. I was really happy to see your message and thank you for the links 👋🙏

[@DiscusRussell]

hi will this bind to eflite msr

[@PropsWheels]

Hi Russell, Apologies for the late reply. Yes, it will bind to E-flite mSR, since mSR is DSMX/DSM@ compatible. Cheers!

[@SOBaseball]

Does it have telemetry?

[@PropsWheels]

Yes, RadioMaster TX16S has telemetry, but not these two receivers in the video.

[@peteengard9966]

Does it have helicopter capability? My old DX7 is showing its age.

[@PropsWheels]

Yes, you can control with it airplanes, helicopters and drones (multicopters). Please watch these videos: kzbin.info/www/bejne/pZekh3-laahjntE kzbin.info/www/bejne/kIOohKdsqrJ3m68

[@doronzabir353]

goooooooood

[@PropsWheels]

Thank you!

[@richardseaman9086]

Does it come with all those protocols in the transmitter or must it be connected to a PC to download the protocols

[@petercane6376]

The Tx16S comes complete with a whole range of protocols already programmed. It has extra compartments in the back to plug in extra modules but you should not need them. The Transmitter can be set up stand alone and on its own. The set up can then be transferred to Open Tx Companion software ( free). Or....you can set the whole nine yards up in open companion and try everything yoh have set up with the built in Transmitter Simulator. It is really cool but yoh need to read up, watch you tubes etc and do some homework first to use Open Tx. I have my Tx16S now for two weeks and I love it. I am 70 yrs and can fathom things out still!,,, .....but SLOWLY ha ha. Hope this answers your question but with more depth.

[@fariyalqayyum7809]

Great

[@PropsWheels]

Thank you Fariyal!

[@theartofflying3108]

I am bit disappointed that for this money there is not touchscreen yet on it but analog buttons and scrollers. Also informative part for binding start from 3 minute of video.

[@PropsWheels]

Thank you for your comment. Actually, this radio does have a touchscreen. Once the OpenTX software is updated to support touchscreen monitors, that feature will be activated on this radio.

[@theartofflying3108]

@@PropsWheels all right but that update has not been released yet as far as I know. Also do you need to update it after purchase straight away to have it working properly ? I bought this radio but didn't have time to even look at it yet.

[@LDDFPV]

Have you ever seen the prices of an Spektrum Radio ? Lmao

[@funbirdsaditya7129]

Sale me your old transmitter

[@PropsWheels]

Hi FunBirds AdiTYa. Are you referring to the Spektrum DX6i or Futaba with Corona module? I am giving the Spektrum to my older son, but the Futaba is available.

[@PropsWheels]

By the way, make sure check out my first channel's first Giveaway! kzbin.info/www/bejne/baXHhaCvoKiEkM0

[@funbirdsaditya7129]

@@PropsWheels ok Sir I want it how can I get this

[@funbirdsaditya7129]

@@PropsWheels I have Subscribe and join the contest

[@Graeme758]

Don't care, just want to see the binding mentioned in the title.

[@PropsWheels]

The binding process is demonstrated at 6:20 and again at 11:25 for the DSMX and DSM2 receivers, respectively.

[@Graeme758]

@@PropsWheels Who wants to wait that long, listening to stuff of no consequence, before getting to the stated content? In 6 minutes, or what remained of it, I had found another video and successfully bound my receiver.

[@I_am_archie]

@@Graeme758 you gunna be ok there cupcake?

[@Graeme758]

@@I_am_archie Really, you come to a year old crap video just to say that? I'm guessing you're American.

[@nathank4104]

I have a turbo timber evo with spectrum receiver. I have been trying to bind it but it never finishes. The red light on top of plane just flashes and beeps at me. Tx16s with Elrs in the internal module. Any idea what could be going wrong?

[@taytayfpv]

You got the wrong model of radiomaster they have a 4 in 1 witch binds to spektrum and multiple other receivers including frsky ...flysky ...ect.....and the elrs model is only for elrs receivers unless you get a external 4 in 1 module . Hope this helps