How to Box a Car Seat Cover - Upholstery for beginners

✅Any donation to support the channel will be much appreciated!
Paypal : [e-mail]
✅Get our courses at: www.cechaflo.com
-------------------------------------------------------------------------------------------------
This pattern is mostly used on 'plain seat covers' but it could be done on another foamed designs.
The first well known common way is the use of a long lateral panel all around front and side parts of a seat cover.
This practical way consists in joining/sewing 2 lateral side panels to a 'big main panel' in central part of the car seat. It is fast way to perform car covers (seat cushions and backrests).
For this project in vinyl I am using thread 92 and needle size 110=22.
Most vinyls are soft and pliable to sewing down.
The design I show in this video could be replicated on big real car seats. Hog rings are used to fasten the cover all around the lower I am using staples for this demonstration instead.
This video stands out how useful are the 'reference points' (v notches) on both sides and main lateral panel. These 'points' are the key to sew the pieces together in order to get a precise cover.
Notice I have cut off the 1 cm seams to 7mm to avoid a lumpy edge on this small sample. On real seats it is not necessary to trim them off. I hope you find this video useful!
I hope you find this video useful!

[@samhutson7966]

Since watching your videos I have purchased a SAILRITE LSZ1-ultrafeed sewing machine!?!

[@Cechaflo]

It is ok to start out doing upholstery. It is a double transport walking foot sewing machine

[@JWB671]

His patterning skills are amazing...

[@samhutson7966]

I find that I follow your work and tutorials into the early morning hours!!

[@samhutson7966]

The paper that you use??to draw your patterns?? Is it card stock?!?

[@Cechaflo]

Yes, it is cardstock paper.

[@samhutson7966]

Some of the writing is blurry! The measurements!!

[@samhutson7966]

I try to photograph the procedures to take down the notes!

[@ignorantlyblissful]

Thank you for taking the time to create such a well informed video, this is hands down the best tutorial I've ever seen!

[@kestutisstanisauskas979]

Super

[@samhutson7966]

What type of marker are you using??

[@Cechaflo]

I used a regular pen to mark on the reverse side without any problem.

[@samhutson7966]

What size cording are you using?

[@Cechaflo]

Plastic pipe 2.5 mm thick. kzbin.info/www/bejne/pZfXpoamhJqGntU

[@vv9451]

Bravo , Maestro ! Lessons are very helpful !

[@jakespede7540]

Great instructional video! I guess after 50 years I'm finally going to have to learn the metric system again👍

[@Cechaflo]

Upholsterers have to learn both measuring systems: English and metric. I used to work with English system in the past.

[@josejimenez-sw5fe]

😊esta mui bien

[@daytonpyro]

where do you get the piping and material? amazon link? or a website please

[@Cechaflo]

I am located in Mexico and I get it from local suppliers. If you are based in the USA, hopefully this link is useful:www.albrightssupply.com/pvc-solid-core-welt-3-32-100-yards-pvc3

[@garryludwick2990]

👍🇺🇸 Great vid. I have a new respect for school buses now

[@silasalves1266]

Muito bom excelente trabalho 👍🇧🇷

[@GregsGarage]

always good to see a video from you Cesar!

[@samhutson7966]

You do not say a word!?! But your hands speak volumes!? Spoken straight to the mind and eyes!! Please keep up the great work!?!🙏🏽

[@Cechaflo]

Hands gestures and the process itself make the student understand what we are doing. No spoken language is needed, so we can reach any human being in the world.

[@samhutson7966]

Awesome! Even a person who can’t speak, can still do the work! A tutorial spoken in foreign

[@samhutson7966]

Language,loses out-has GAPS IN THE TRANSLATION!!

[@lovinglife3675]

Fantastic tutorial Sir .... learnt lots and appreciate you taking the time to do this video ... regards

[@deltajohnny]

Como siempre, un trabajo espectacular... 👏👏👏👏 El resultado final es perfecto porque cada paso es realmente meticuloso. Una maravilla!!! 😉😉😉👍👍👍

[@tadevmax6248]

Thank you SUPER PAPI 👍👍👍👍👏👏👏👏👏👏🖐

[@untungsurapati559]

From Indonesia : Great Tutorial vedeo, thaks Brother

[@piyalro]

Very Good Video. learned lot of things. Thanks

[@samhutson7966]

The glue? What type is it & where can I get?

[@Cechaflo]

I used an upholstery yellow brushable glue. kzbin.info/www/bejne/pWPblpiwmatridU If you are in the USA: m.dap.com/dap-products-ph/weldwood-landau-top-trim-high-heat-resistant-contact-cement/ (sprayable and brushable) You could get it on Ebay, Amazon, etc. www.ebay.com/p/1158244263 (brushable) kzbin.info/www/bejne/iH2raXWPbcZlqtE

[@samhutson7966]

Thanks so much for the info on the glue!!

[@v8nagrom]

Perfectionism in its best. A pleasure to watch, as always. Thanks, Cesar!

[@rafiq24032mh17]

I love the way you do the out line of any object and make a mold of it I'm learning alot from your work

[@Cechaflo]

It is a basic and practical way to mold a car seat cover. Many car upholsterers use this method as a fast way to gain time with their jobs. Same method is applied on these related videos on a real car seat: kzbin.info/www/bejne/i4OThKtnec2NgKM kzbin.info/www/bejne/haCUoaCHoL2rqNU kzbin.info/www/bejne/hZ-pXqSNqbaUmpI

[@rafiq24032mh17]

@@Cechaflo I watch alot of your videos I have a singer 328k that I going to use soon hopefully lol but I got to learn first

[@AMetalWorks]

Thank you soooo much!

[@annettakenis1139]

Как всегда все отлично. Браво εβχαριστο!

[@fuadalani4815]

How is the packaging. this part

[@majidkhajehmahdi3049]

بعنوان کسی که سالهاست تخصصم همینه،از بابت آموزش برای نفراتی که کار تودوزی رو دوست دارن و میخوان اصول اون رو بدونن،و دنبال کنند عالی بود،مرسی

[@mohammedgoodarzi6605]

منم خیلی دوست دارم و دوست دارم تجربم بیشتر بیشتر بشه

[@daos3300]

cechaflo the master

[@eross21]

when making patterns. how do you determine where to make seams? what are you keeping in mind while drawing them out on the foam. do you mostly put a seam where one plane intersects another plane? what do you do for sunken in concave( sunken in areas) ?

[@Cechaflo]

Regularly the seams are made on the edges where two planes intersect: a horizontal plane and a vertical one. Regularly are also made on flat areas. On concave or convex areas it would be necessary to draw several planes and seams. For instance a soccer ball or a car suspended headliner.

[@eross21]

@@Cechaflo that is extremely helpful thanks

[@jadengomez6613]

A good tip Is to use tape for a template.

[@thusharasampath4100]

Great thanks from sri Lanka

[@mohammedgoodarzi6605]

Veri nac

[@محمدحامد-ط3م9ك]

اخي حاول تختصر العمل او تسريع الفيديو

[@hentzant]

Great video thank you

[@frankpeutz9106]

You keep amazing me every single video!!! Greetings from Belgium.

[@Cechaflo]

Thanks for kind comment! Greetings too from Mexico!

[@621heberth]

Great job!!!!!

[@mikailkaya3593]

Perfect

[@michaelclark2840]

Nice work indeed. Just curious, what make/model of machine are you using?

[@Cechaflo]

Pfaff 1245-706 triple transport sewing machine:kzbin.info/www/bejne/i2Src4t4eal-pdE

[@michaelclark2840]

@@Cechaflo thankyou!

[@markstang1965able]

Priceless. Without words to express my gratitude.

[@Cechaflo]

I am so glad these videos are useful! Thanks so much for kind words of gratitude!!!

[@tfsupp]

Thank you

[@TheTray2003]

Cool! :):):)

[@ВолодькаПупкин]

Какой номер иголки используете?

[@Cechaflo]

As the vinyl is soft I have used a 110=18 needle size.

[@faouzijaiem466]

Bravo

[@авохкгцебгфшаи]

Bravo 👍

[@Вадим-ф9с7в]

Как всегда на высоте!!!

[@صدامحسين-ي9ح1ض]

👍👏👏👏

[@noyrdine5110]

buenas maistro que cola usas?!

[@Cechaflo]

kzbin.info/www/bejne/pWPblpiwmatridU

[@joedrelicharz6235]

Thank you, well done

[@fernandojunior2343]

Mestre👐👐👐👏👏

[@fernandojunior2343]

Você tem que trocar o motor da sua máquina. Coloca um servo motor eletrônico. Eu uso na minha . Fica top , você vai gostar.

[@Cechaflo]

¡ Muchas gracias por su consejo! Tiene toda la razon. En cualquier momento compraré un motor servo.